Schreinerei Pfob

Condition: used, Year of construction: 1995, Used machine Bwjdpfxoyq T Inj Ah Isi Year of manufacture: 1995 Condition: unchecked Equipment and technical data: - Edgebanding thickness: 0.3-5 mm - Workpiece thickness: 6-45 mm - Minimum workpiece width: 60 mm - Minimum edge length: 200 mm - Feed rate: 11 m/min - Electrical connected load: 3.4 kW - Extraction port: 100 mm - Air requirement: 550 m³/h - Glue system: cartridge 1906 - Trim saws, front and rear: 1975 - Radius milling unit, top and bottom: 1942M - Radius scraper, top and bottom: 1929 - Buffing unit: 1941 K - Machine length: 3675 mm - Machine width: 1470 mm - Machine height: 1200 mm Weight: 950 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Equipment and technical specifications: - With glue application unit for hot melt adhesive granulate - Suitable for processing PU adhesive granulate in compliance with adhesive processing regulations - Glue reservoir located beneath the glue roller - Glue application to the workpiece via glue roller in both co- and counter-rotation - With contact heating shoe for preheating the workpiece - Automatic edge magazine for rolls and fixed lengths - Pressure zone with pneumatically driven main pressure roller and special follow-up pressure rollers to compact the top and bottom glue joints - Centrally adjustable top pressure - Central manual chain lubrication - Control panel at machine infeed - End trimming aggregate: - For trimming front and rear edge overhang; high-precision linear guide - 2 motors, each 0.18 kW - Tilt range for straight and angled cuts: 0–15 degrees - Flush milling aggregate: - Top and bottom with vertical and horizontal sensing - Swivel range 0–15 degrees with 2 milling motors using interchangeable straight/radius cutter combinations - Digital counters enable fast and defined, i.e. repeatable, adjustments - Two-point pneumatic adjustment of top and bottom milling motors - Scraper unit for finishing, with horizontal/vertical sensing - Extendable workpiece support up to 350 mm - Integrated section control for contactless operation of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8–50 mm - Edge thickness: 0.4–3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3,150 mm Weight: approx. 750 kg Availability: short-term Bsdpfx Ahjyq T E To Iowi Location: Röllbach

Condition: excellent (used), SCM S12 SW Industrial Thickness Planer – Made in Italy For sale: SCM S12 SW industrial thickness planer, manufactured by SCM Group (Italy). Heavy-duty professional woodworking machine, suitable for carpentry workshops and furniture manufacturing. SCM machines are renowned for their durability, precision, and robust industrial design. Technical specifications Model: SCM S12 SW Working width: approx. 520 mm Max working height: approx. 240 mm Power supply: 380 V / 3 Phase / 50 Hz Cutterhead: 4 knives Automatic feed system Year: 1990 Made in Italy Condition The machine is in good working condition and ready for use. Suitable for Carpentry workshops Furniture production Bodpfjyq Razjx Ah Iswi Industrial woodworking

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, feed rate X-axis: 35 m/min, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor power: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue scraping unit Polishing unit 2 motors Spraying device MACHINE DETAILS Bedpsyqybujfx Ah Iewi Control system: PC 22 EQUIPMENT Pressure applied with rubber belt Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melter for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for edge pressing with 5 pressure rollers Units mounted on safety guards CE marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photo documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 5321

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, working width: 1,935 mm, number of spindles: 40, plate height: 350 mm, working length: 6,200 mm, number of axes: 4, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Bedpjyqx U Hofx Ah Iewi Number of edge tape magazines: 3 Number of tool positions in tool magazine: 22 (located at the rear of the machine) Drilling spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Suction cups for securing the workpiece Safety mats at the front Vacuum pump Waste chip conveyor Fixed groove unit for slotting in X direction The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the item prior to collection and assumes responsibility for installation, securing, and operation of the machine at the place of destination. External reference: 8105

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Features and technical specifications: - Round pot glue application unit - With second glue application unit for PUR processing Bodpfx Ahsyqanbe Iowi - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end cap cutting - Top/bottom milling units: 2 milling units with tracing wheels for radius or chamfering - Radius scraper blade: pneumatically operated, post-processing of radii - Surface scraper blade: for smoothing the edge surfaces - Polishing unit: 2 polishing wheels with motors for final finishing - Riepe spray device - Control: PLC with control panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120 x 840 x 1385 mm Machine weight: approx. 3,000 kg Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2002, with jointing unit Total length: 6,790 mm Depth: 1,145 mm Max. height: 2,264 mm Workpiece support height: 850 mm Edging thickness: 0.4 - 25 mm Max. edging height: 66 mm Min. edging length: 200 mm Min. workpiece width: 60 mm Min. workpiece length: 140 mm (with 60 mm workpiece thickness) Max. workpiece length: approx. 6,000 mm Workpiece thickness min./max.: 6/60 mm Air requirement: 3,000 m³/h Extraction port diameter, main machine: 160 mm Extraction port diameter, jointing unit: 125 mm Weight: approx. 2,800 kg Storage location: Supplier Bodpfx Ajypwk Deh Iewi

Condition: good (used), Code: 0316 Brand: HIRZT - ITALY Model: MIREA - CE Standard Automatic edge bander with hot melt glue for panels, furniture, custom-made furnishings, wooden doors, kitchens, bathroom furniture and various - CE Standard Technical data: Glue application on the panel Panel height 10/50 mm Bwedpfx Ajypm Tujh Iji Max edge thickness 1 mm Minimum panel dimensions 70 x 140 mm Automatic feed with belt drive - Feed speed 4 mt/min Power consumption 4 Kw Copying trimming unit: cutters mm 70 x 14 x 12 Z4 15 degrees Knife end trimming unit Extendable front support - Inlet extension - Worktable height 900 mm Overall dimensions mm 1900 x 1100 x 1250 h Weight kg 300

Condition: excellent (used), Year of construction: 2020, Homag Edgeteq S-200 Year: 2020 Bedpfxjypm Hho Ah Iswi Specification: Feed Speed 11m/min Machine Length 4605mm Workpiece Thickness max 60mm Edge Material Roll 0-3-3mm Edge Material Strips 0.4-5mm Joint trimming / pre-milling (44mm high blocks) Standard EVA glue unit Pressure zone with 1 main pressure roller + 2 idel rollers with pneumatic adjustment for thickness End Trim unit with pneumatic adjustment for chamfer / straight Top and bottom trimming unit with 2mm cutters Contour trimming unit with 2mm cutters Profile scraping with pneumatic adjustment with 2mm blades Additional changeable scraping heads with 1mm blades Glue Joint scraper Buffers LED indoor lighting Control system easy touch Package for construction elements Basic v Package Central Lubrication 400V 50Hz CE

Condition: excellent (used), Year of construction: 2019, Specification Bodpfx Ahjypm Dgj Iowi 2 tanks 1 cleaning station Suitable for right sided machine such as Edgeteq S-240, S-300 and S-380 400V 50Hz

Condition: excellent (used), Year of construction: 2019, Specification: Working height: 950mm Length: 4773mm Workpiece Thickness: 60mm Edge Material Roll: 0.4-3mm Edge Material Strip:0.4-6mm Adjustable Infeed Fence Workpiece Support Feed Speed 11m/min Central Lubrication Roller Top Pressure Manual Top Pressure Adjustment Separating Agent Spray Device Joint Trimming Unit 2x2.2kw Panel Pre-Heating QA65 Application unit for PUR Pressure Zone End Trim Unit Trimming Unit Counter Trimming unit Radius Scraping Unit with 2 sets of quick change heads Glue Joint Scraping Detergent Spraying Unit Buffers 400V 50Hz Bwodpfxeypm Avo Ah Iei CE XES 200 with 2 tanks and 1 cleaning station including collecting tray.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Edge band thickness from 0.4 to 5 mm Panel height from 8 to 50 mm Max table thickness: 60 mm Premilling Glue with interchangeable Teflon-coated tank Bwodpfx Ahoyplmye Isi Multifunction finishing unit Corner rounding Spray systems for release agents or lubricants Sanding unit End trimming unit Radius/corner scraper unit Glue scraper Brushing unit Control: Touchscreen panel Total power: 8.4 kW

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, - Max. feed rate: 11 m/min Bwsdpfx Asypbzyjh Isi - Max. edge thickness: 3 mm (coils), 8 mm (strips) - Max. workpiece thickness: 50 mm - Joint milling cutter - Gluing unit - End trimming unit - Milling unit - Corner copying unit - Scraper blade – radius & flat - Buffing (polishing) unit

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, - Max. feed rate: 16 m/min - Max. workpiece thickness: 60 mm - Max. edge thickness: 3 mm (rolls), 12 mm (strips) - Jointing cutter - Gluing unit - End trimming - 2x milling - Corner copying unit - Scraper (radius + flat) - Buffing - Release agent spraying Bwjdpfx Aeypbugjh Ioi !!! Including return conveyor !!!

Condition: ready for operation (used), Year of construction: 2005, Edgebander manufactured in 2005. This OTT Twister features a hot-cold melt adhesive application process and can handle edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses of 8 to 60 mm and has a feed speed of 14-20 m/min. If you are looking to get high-quality edge banding capabilities, consider the OTT Twister edgebander we have for sale. Contact us for further details. • Adhesive application: Hot/cold melt adhesive process; application roller with synchronous and counter-rotation • Edge thickness: 0.3–10 mm • Workpiece thickness: 8–60 mm • Workpiece width: minimum 70 mm • Workpiece length: minimum 150 mm • Operating pressure: 6 bar • Feed power: 3.0 kW • Feed speed: 14–20 m/min • Electrical connection: 3x 400 V, 50 Hz • Extraction requirement: 1x Ø180 mm at 20 m/s = 35 m³/min • Air speed (minimum): 20 m/s • Compressed air consumption: approx. 300 l/minProcessing units / equipment on the machine: Bodjyn I U Rspfx Ah Iswi • Joining: • 2 x 2.2 kW, n=14,600, 250 Hz; two application-controlled working spindles • Combi-melt gluing unit: • Top-mounted, changeable hopper for EVA, PUR hot melt adhesive or cleaning granulates; hopper volume 2.5 l • AKM (automatic edge magazine): • Automatic edge magazine with optical monitoring for strip edges in fixed lengths • Capping: • 2 x 0.8 kW, n=12,000, 200 Hz; automatic swivel 0°/5°; 2 HM saw blades Ø140 x 3.2 x 16, z=34 • Flush milling: • 2 x 0.7 kW, n=12,000, 200 Hz; single-sided probing; 2 carbide-tipped indexable knife heads HF70, Ø70 x 20 x 16, z=4 • Fine milling (bevel 15°/30°/45°): • 2 x 0.3 kW, n=12,000, 200 Hz; double-sided probing; 2 carbide indexable insert cutter heads HF70, Ø70 x 20 x 16, z=4 • AWSR (radius R2–R5): • 2 quick-change sets for fine milling cutter, 2 x 0.3 kW; 2 carbide indexable insert cutter heads AR73 x 16 x 16, z=3, R2–R5 • AKF (copy milling): • Automated copy milling with two separate working spindles for end faces and longitudinal radii; 2 x 0.37 kW, 12,000 rpm; tools R1–R3 • Scraper blade: • 2 x carbide scrapers, automatic feed • Surface scraper: • 2 x carbide scrapers, with fine adjustment device • PU set: • 5-way spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent), fine buffing device with cloth disc • Edge cleaning: • 2 x 0.2 kW, n=2,800, 50 Hz, oscillating brushes

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-200-07-9819, Type: KAL210 / EDITION Machine no.: 0-200-07-9819 Year: 2011 Single-sided machine for machining straight workpiece edges. Edge banding and post-processing of various edge banding materials, in through feed lengthwise and crosswise. Bjdpsyn Ilpsfx Ah Iewi POWER CONTROL control PC22 Control system Windows PC Hardware: PLC control Integrated stretch control for contact-free control of the machining units Operating system Windows XP Industrial PC 10" TFT monitor with touch screen, selection and setting of all necessary production parameters, such as: program selection and workpiece thickness adjustment. PC keyboard and mouse USB connection Network connection Remote control Setting operation, start feed, emergency stop switch Unit equipment: -Release agent application unit -Joint milling unit -Glue unit A20 with 2 rollers -Cutting unit HL84 -Pre-milling unit -Shape milling unit FF32 -Universal milling unit UF10 -Profile sanding unit PN10 -Finishing unit (glue joint sanding unit + polishing brushes) Technical data Minimum workpiece width: for thicknesses 12-22 mm, 60 mm for thicknesses 23-40 mm, 105 mm Workpiece overhang 30 mm Workpiece thickness 12-60 mm Molding material on roll 0.3-3 mm Molding cross-section max: For PVC 135 mm2 For veneer 100 mm2 Molding material strips 0.4-20 mm Edge cross-section for strips 900 mm2 Working height 950 mm Pneumatics 6 bar Power 400 volts, 50 Hz, 3-phase NOTE Subject to incorrectly published technical data.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, edge thickness (max.): 15 mm, overall weight: 4,000 kg, OTT edge banding machine type Strom+ Optional with return system TransCompakt or TransLift. The machine is factory reconditioned and is sold with warranty in Germany. New tools, new chain plates and belts. For PUR glue and EVA glue. Alternatively, we also have access to a Tornado+ and StrongEdge, both factory reconditioned. Bwsdpfxoyn Am Ij Ah Iji

Condition: good (used), Hebrock 3007 DK F Edge Bander Bedpfx Ahoynz Uwe Iswi Well equipped, inspection possible before purchase Pre-milling cutters Glue application with roller, Tank has quick-change function Pneumatic pre-cut guillotine Pressure rollers Finishing trim saw Top and bottom milling unit, R1 – R2 pneumatically adjustable Profile scraper activated from the control panel Corner rounding unit pneumatically adjustable Milling aggregate Flat scraper Polishing unit Grooving saw unit Max workpiece height 50mm Max edge thickness in roll: 3mm Feed rate: 10m/min In good condition, fully operational Workpiece exits finished and ready

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Compact and flexible in the smallest of spaces. Workpieces receive their finish within a length of just 2.13 m. Equipped with a 1.1 kW high-frequency motor joining unit and diamond-tipped spiral joining cutter, Teflon-coated glue unit, pre-end trimming unit, and HF multifunction milling unit. Two free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Technical data Machine length: 2,122 mm Bedpfx Ahoynu A Uo Ijwi Workpiece thickness: 10–45 mm Minimum workpiece width: approx. 120 mm Edge thickness: 0.4 – 2.0 mm Edge height max.: workpiece height + 4 mm (2+2) Electrical connection: 400 V Total connected load: 3.6 kW Feed speed: 6.5 m/min Pneumatic connection: 6 bar Net weight: approx. 490 kg Options: Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term

Condition: good (used), Year of construction: 1988, functionality: fully functional, PLC control Workpiece thickness max 60 mm Edging thickness for roll material 0.4 - 3 mm Edging thickness for strip material 0.6 - 20 mm Edging thickness for strip material (without flush trimming) 30 mm Minimum workpiece width 60 mm Minimum workpiece length 140 mm 1901 Automatic edge feed for strip/roll material 1907 Glue application for panel thickness up to 60 mm, "Ultra-Granu-Press" granulate heating time approx. 3 - 4 minutes 1911 Pressure unit up to 30 mm edging thickness Bwodoyntq Djpfx Ah Isi 1916 End trimming unit 2 x 1.1 kW up to 30 mm edging thickness 1920 Flush trimming unit 2 x 1.1 kW up to 20 mm edging thickness 1966 Profile trimming unit, flush/chamfer/radius up to R = 3 mm 1927 Scraper unit, pneumatically controlled 1944 Buffing unit 2 x 0.15 kW, automatically actuated Feed rate 8/16 m/min Length 5720 mm

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Currently still in production Equipment and technical data: Glue pot Pressure zone Cut-off saw Combination milling (radius 2 mm), flush trimming Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Maximum edge height = workpiece height + 4 mm (2+2) Electrical connection: 400V, 50 Hz, 3-phase Total connected load: 3.2 kW Feed speed: 8.0 m/min Pneumatic connection: 6 bar Net weight: 550 kg Optional retrofits for the machine: Bsdpfx Aoynpc Njh Iewi Radius scraper Flat scraper Buffing unit Location: NRW Availability: Approx. December 2025

Condition: like new (used), pre-milling unit glue station for granulate maximum working height 60 mm guillotine for trimming edge band from roll precision end trimming unit milling unit for edge band excess from top and bottom of the panel profile scraper flat scraper polishing units machine length 420 cm year of manufacture 2014 Bwodjynizlepfx Ah Iji weight 1200 kg CE marking

Condition: used, Edge banding machine Brand: Brandt Model: Profiline KDF 670-C Hiflex Single-sided edge banding machine in right-hand design, for hot melt gluing. Quick-change gluing unit for hot melt glue. Processing with PU glue granulate possible in accordance with glue specifications. Leak-proof glue reservoir under the glue roller. Precise glue application to the workpiece with glue roller, no adjustment of workpiece thickness necessary. Glue roller with selectable rotation direction for counter or forward feed. Glue temperature monitoring via electronic thermostat. Automatic reduction of glue temperature during work breaks. Infrared heating for hot melt reactivation. Automatic edge banding magazine for roll material and fixed lengths, including roll plate with a diameter of 800 mm and reinforced cutting shears for thick PVC/ABS, max. 3 x 45 mm. Standard equipment with edge banding and workpiece – distance monitoring with optical display. Stable pressure zone with driven, compressed air-loaded main pressure roller and 3 free-running post-press rollers. Standard equipment with automatic central lubrication for the transport chain. Motor-driven adjustment of overpressure. Control panel at the machine infeed. Technical data Edge strip thickness: 0.4 – 12 mm Cutting tool: max. 3.0 x 45 mm or 0.8 x 65 mm Workpiece thickness: 8 – 60 mm Bjdpfxsynhwfe Ah Ijwi Feed speed: 11 – 16 m/min (see below) When selecting edge banding thicker than 3 mm, the feed speed is automatically switched to 14 m/min. automatically to 14 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: 400 V, 3-phase, 50 Hz Compressed air connection: 6 bar Connected load approx. 17 kW Machine length: 6,860 mm Full information about the machine can be found on our webpage burbagemaskin.se

Condition: used, machine/vehicle number: 008437, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Bwjdoyng Agepfx Ah Isi Max feed speed: 12 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 006603, Type of edging: Thin edge, Thick edge, Solid wood Bwedpoyngz Asfx Ah Isi Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr