Hilco Industrial

Condition: like new (used), Year of construction: 2022, operating hours: 454 h,

Condition: new, functionality: fully functional, empty load weight: 290 kg, maximum load weight: 460 kg, overall weight: 750 kg, axle configuration: 1 axle, permissible axle load (axle 1): 750 kg, loading space length: 2,460 mm, loading space width: 1,270 mm, loading space height: 100 mm, total length: 4,080 mm, total width: 1,950 mm, tire condition: 100 %, trailer brake: trailer unbraked, Year of construction: 2026, Loading dimensions approx. 1270 mm x 2460 mm External dimensions approx. 1950 mm x 4080 mm Permissible total weight: 750 kg Payload: approx. 460 kg (payload may vary depending on additional equipment) Manufacturer: Vezeko Special features - Lowering trailer - 100 mm aluminium side panels (anodised) - Load area can be lowered hydraulically (hand pump) - Rear end chamfered - 4 lashing eyes on outer frame - 8 lashing points in the load floor - Lockable storage box at the front - Vehicle documents included Further equipment - Floor panel: wooden floor - Wheel chock + holder Chassis - Alko | rubber spring axle | V-drawbar with ball hitch | jockey wheel Electrics - 12 Volt | 13-pin plug | side marker lights | marker lights Bjdpsy I Uicefx Ad Ajwl If you would like to purchase this trailer or have further questions about trailers, please use our internal lowering trailer "No. 13281426".

Condition: used, Year of construction: 1998,

Condition: used, Year of construction: 2004, number of beds: 4, first registration: 03/2004, total length: 7,200 mm, total width: 2,300 mm, total height: 2,600 mm, overall weight: 1,600 kg, empty load weight: 1,275 kg, Equipment: awning, bathroom, onboard kitchen, parking heater, twin bed, Accessories, extras, and retrofit add-ons not installed by the manufacturer are not included in the sale price. These are provided free of charge. Free accessories: Awning, front tent, maneuvering assistance – Truma Mover – fully automatic, underfloor heating, fly screen door, anti-sway coupling, 100 km/h approval. General inspection / gas test: New upon sale. Financing is available through CreditPlus Bank. Bjdey I Uh Ejpfx Ad Aowl Errors, changes, and prior sale are expressly reserved! The vehicle description only serves for the general identification of the vehicle and does not constitute a warranty in the legal sense of a purchase agreement. Only the agreements in the order confirmation or purchase contract are binding.

Condition: used, mileage: 131,000 km, power: 118 kW (160.44 HP), fuel type: diesel, fuel: diesel, color: yellow, gearing type: mechanical, emission class: euro6, Year of construction: 2021, Year of manufacture: 2021 Cab: double VAT/margin: VAT qualifying = Additional options and accessories = - Rear air suspension Bjdpjy I Uhfsfx Ad Aowl = Remarks = 6-seater PTO Hydraulic Like new

Condition: excellent (used), Column drilling machine Manufacturer: Ixion Model: BS 30 AV STG Taper: MK 3 Infinitely variable speed: 80 - 1400 rpm Three automatic feeds: 0.1–0.2–0.3 per revolution Thread cutting function Throat: 280 mm Table size: 550 x 400 mm Max. distance: quill to table 750 mm Motor: 380 volt Transport dimensions: Height: 2050 mm with base plate Depth: 1000 mm Width: 560 mm Bedpfxsy I Ug Ue Ad Aewl Weight: 355 kg with pallet

Condition: new, functionality: fully functional, empty load weight: 680 kg, maximum load weight: 1,920 kg, overall weight: 2,600 kg, axle configuration: 2 axles, permissible axle load (axle 1): 1,300 kg, permissible axle load (axle 2): 1,300 kg, loading space length: 3,060 mm, loading space width: 1,800 mm, loading space height: 700 mm, total length: 4,400 mm, total width: 1,920 mm, trailer brake: trailer braked, Year of construction: 2026, Loading dimensions approx. 1800 mm x 3060 mm External dimensions approx. 1920 mm x 4400 mm Gross vehicle weight: 2600 kg Payload: approx. 1920 kg (Payload may vary depending on optional equipment) Manufacturer: Debon Bjdpey I Ufkofx Ad Aewl Special features - 3-way tipper "PW2.4E" - Electric hydraulic pump (battery-powered) - Charging contacts in the frame profile (12V / compatible with chargers) - 6 lashing rings in the loading floor - H-frame, galvanized steel (installed / removable) - 350 mm foldable / removable aluminium side panels - 350 mm foldable / removable aluminium side wall extension - Ramp compartment (without ramps; ramps available as optional accessory) - Vehicle documents included Additional equipment - Floor plate: galvanized steel sheet over phenolic plywood - Wheel chocks + holders Chassis - Axle and drawbar fully hot-dip galvanized | Rubber suspension axle | V-drawbar with ball coupling | Heavy-duty automatic jockey wheel Electrics - 12 volt | 13-pin connector | Rear fog lamp | Marker lights If you would like to purchase this trailer or have further questions about trailers, please use our internal 3-way tipper trailer "No. 12332580".

Condition: good (used), Year of construction: 2021, operating hours: 2,883 h, load capacity: 2,000 kg, lifting height: 2,023 mm, fuel type: electric, mast type: duplex, construction height: 1,540 mm, empty load weight: 1,200 kg, mileage: 2,883 km, Electric DUO stacker Bsdpfxey I Ud Ts Ad Aowl Brand: Still (Germany) Year of manufacture: 2021 Capacity: 2,000 kg Lifting height: 2,024 mm Overall height: 1,540 mm INITIAL LIFT, ideal for uneven floors Hours: 2,883 hours Battery with external charger Automatic filling system

Condition: excellent (used), 1 lot of modular reamers Bwedpfsy I Uc Nox Ad Ajl Diameters: 77 H7, 78, 80 H, 82 H7, 85 H7, 90 H7, 100 H7 Total weight: 24.5 kg Individual sale possible, price on request

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 680 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D Powerline, table load: 1,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 37,000 W, number of slots in tool magazine: 80, tool weight: 25,000 g, number of axes: 4, These 4-axis Starrag Heckert HEC 500 H/V were manufactured in 2008 and 2009. They features a swivelling head configuration, with an X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 680 mm. The machines include a pallet size of 500 x 500 mm and a maximum load per pallet of 1000 kg. If you are looking to get high-quality machining capabilities, consider these Starrag Heckert HEC 500 H/V horizontal machining centres we have for sale. Contact us for further details. • Package: 2 horizontal machining centers + shared pallet storage system • STARRAG HECKERT HEC 500 H/V (2008) • Control: Siemens SINUMERIK 840D Powerline • Head: Swivelling H/V head (Horizontal/Vertical) • Pallet size: 500 x 500 mm • Travels: X 800 mm / Y 800 mm (vertical position) / Z 680 mm • Rapid traverse: 60 m/min • Spindle power: 37 kW • STARRAG HECKERT HEC 500 H (2009) Bwjdpoy I Ucvsfx Ad Ajl • Control: Siemens SINUMERIK 840D Powerline • Pallet size: 500 x 500 mm (DIN 55201) • Travels: X 800 mm / Y 650 mm / Z 680 mm • Rapid traverse: 60 m/min • Spindle torque: 82 Nm • Max. tool weight: 25 kg • Max. tool diameter: 80 mm (160 mm with free adjacent places) • NC rotary table (B-axis): 360,000 x 0.001° • Note: Tool breakage detection system is out of service Additional equipment • Fastems FPC 1500 Linear Pallet Pool (shared by both machines) • Automation: Both machines connected to the Fastems FPC 1500 LPP • For HEC 500 H (2009): • Coolant system with paper band filter • Internal coolant supply, 50 bar • Chip conveyor Technical Specification Taper Size SK 40

Condition: used, mileage: 393,000 km, power: 324 kW (440.52 HP), first registration: 11/2016, fuel type: diesel, tire size: 445/75 R 22.5, axle configuration: 10x8, wheelbase: 6,800 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 9,850 mm, total width: 2,550 mm, Year of construction: 2016, Equipment: ABS, AdBlue, air conditioning, central locking, electric window regulation, = Additional Options and Accessories = - 10x8 - Digital tachograph - Lift axle - Hub reduction - Radio/CD player - Reversing camera - Sun visor = Further Information = Technical Data Number of cylinders: 6 Engine displacement: 12,419 cc Axle Configuration Front axle 1: Tyre size: 445/75 R 22.5; Steered; Left tyre tread: 40%; Right tyre tread: 40% Front axle 2: Tyre size: 445/75 R 22.5; Steered; Left tyre tread: 30%; Right tyre tread: 30% Central axle: Tyre size: 425/65 R 22.5; Steered; Left tyre tread: 50%; Right tyre tread: 50%; Suspension: Air suspension Rear axle 1: Tyre size: 325/95 R 24; Twin tyres; Left inner tread: 20%; Left outer tread: 20%; Right inner tread: 20%; Right outer tread: 20% Rear axle 2: Tyre size: 325/95 R 24; Twin tyres; Left inner tread: 15%; Left outer tread: 15%; Right inner tread: 15%; Right outer tread: 15% Weights Unladen weight: 20,455 kg Payload: 29,545 kg Gross vehicle weight (GVW): 50,000 kg Functional Tipper: Rear Bjdpsy I Ucpsfx Ad Aswl Condition Damages: none

Condition: used, mileage: 551,291 km, power: 184 kW (250.17 HP), first registration: 12/2015, fuel type: diesel, empty load weight: 6,235 kg, maximum load weight: 4,170 kg, overall weight: 11,990 kg, axle configuration: 4x2, wheelbase: 5,400 mm, next inspection (TÜV): 11/2025, brakes: other, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,290 mm, Equipment: ABS, cabin, compressed air brake, cruise control, immobilizer system, navigation system, onboard computer, power assisted steering, soot filter, spoiler, tail-lift, traction control, * German vehicle * Documentation and inspection books available * 1st owner * Stuerenberg box body * Loading dimensions: Length = 7,200mm x Width = 2,500mm x Height = 2,370mm * Securing rails right & left * MBB Palfinger tail lift C1500S * Load capacity 1,500 kg * Foot switch * Roll-off protection * Multifunction steering wheel * Adaptive cruise control * Lane keeping assistant * Hill start assist * Comfort driver's seat, air-suspended * Electric windows * Roof spoiler * Heated electric mirrors * 6-speed manual transmission * Central locking with remote control * Differential lock * Garmin navigation * Hands-free system * Radio CD * Daytime running lights * Wheelbase: 5,400 mm * GVW: 11,990 kg * Empty weight: 6,235 kg * Payload 5,755 kg If a new TÜV inspection is required, we will gladly make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods so that there are no false impressions regarding the condition and suitability for the buyer. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors. Bedpfx Ajy I Ub Sed Aewl - .

Condition: ready for operation (used), Year of construction: 1995, Drilling capacity St 60/GG 22: 40/50 mm Thread cutting St 60/GG 22: M 36/M 45 Bwedpfx Adoy I Ua Ij Ael Clamping area of the table: 600 x 1800 mm Height adjustment of the boom: 450 mm Min./max. drilling radius: 305/1305 mm Spindle taper: SK 40 Quill stroke: 200 mm Infinitely variable spindle speeds: 15 - 2800 rpm Infinitely variable feeds: 5 - 2000 mm/min Spindle drive, frequency controlled: 5.5 kW Electrical connection: 400 V, 14 kVA Weight: 3400 kg Space required: 3800 x 2000 x 2500 mm

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 159 kW (216.18 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,071 kg, input voltage: 400 V, total width: 2,240 mm, total length: 3,050 mm, total height: 2,500 mm, warranty duration: 6 months, heating capacity: 160 kW (217.54 HP), Aircooled chiller/Heat pump YORK YMPA0160PE50 159 kW/160 kW Cooling capacity: 159 kW / 45.21 tons (12/7 — 35°C) Heating capacity: 160 kW / 45.5 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump. Hydraulic module Refrigerant circuit: 3 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 4 pcs. COPELAND ZP143KCE-TFD-423 (scroll) + 1 pcs. HITACHI DC80PHDG-D1J2 (scroll, inverter) Type of refrigerant: R410a Number of fans: 3 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo (Frequency inverter) Dimensions: 3.05x2.24x2.5 m. Weight: 2071 kg. Working hours: 0/0/0/0/0 h. Condition: New Bjdpfx Adsy I Uahs Ajwl CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), robust transport trolley Bodpfx Adoy I T U Re Aewl Width: 895 mm Length: 1340 mm Height: 1040 mm 3 tiers: 815 x 1250 mm Multiplex board, 20 mm thick Aluminium profiles, 40 mm diameter

Condition: used, mileage: 1,280,000 km, power: 324 kW (440.52 HP), first registration: 05/2003, fuel type: diesel, tire condition: 50 %, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 6,000 mm, total width: 2,500 mm, total height: 4,000 mm, Year of construction: 2003, Equipment: ABS, air conditioning, differential lock, electric window regulation, spoiler, = Additional options and accessories = - 2 fuel tanks - 2 sleeping places - Armrest - Front suspension: Leaf - High sleeping cabin - Open roof - Rear suspension: Air - Sleeper cabin - Sper - Spoilers = More information = Tyre profile: 50% Brakes: disc brakes Bjdey I T Ukjpfx Ad Ajwl Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Suspension: air suspension General condition: moderate Technical condition: very poor Visual appearance: moderate

Condition: excellent (used), color: black, Year of construction: 2021, operating hours: 42 h, Empty weight: 340 kg Lifting capacity: 1.200 kg Dimensions of cargo space: 120 x 75 x 50 cm CE mark: yes Technical condition: very good Visual appearance: very good Bwedpfxoy I T Tts Ad Ajl Delivery terms: EXW Production country: UK Please contact Vink Machinery for more information Tracked Carrier * 2021 * 42 working hours * Battery drive * With detachable glass rack * 360-degree turntable * Remote Control * One-hand operated * 1200 kg lifting capacity * 340 kg own weight

Condition: excellent (used), Tul-Kelch tool rack SK 40 Bwsdpfxoy I T S Ns Ad Ael Tool holder SK 40 48 slots for SK 40 tools Width 900 mm Depth 450 mm Height 1090 mm

Condition: excellent (used), Airless spraying unit Brand: GRAO Bodpfx Ajy I T Haed Ajwl Model: H 32 Hose length: 15 meters

Year of construction: 2015, condition: used, DATALOGIC POS system Magellan 9800i with Bizerba scale CS 300 MA 9803, scanner cash register Manufacturer: MAGELLAN Model: various Year of manufacture: from 2015 Designation: POS system Weight: approx. 8 kg (with power cable) Connection by qualified technician Price for collection from warehouse 47441 Moers Packaging and shipping costs net €29 Currently 10 units in stock. Further questions welcome by phone or on site. All offers from warehouse 47441 Moers. All dimensions are approximate (photos similar/for reference) Bwedpfxoy I T Dlj Ad Aol

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Offer without obligation 1) Combi folding machine Make: MBO Type: K 800.2 S-KTL-Aut. Bsdpfx Adoy I Txvs Ajwl Size: 78 x 120 cm Year: 2009 Equipment: - Automatic combi folding machine MBO K 800.2 -.S -KTL. - pallet feeder K8 - FP120 - VACULIFT separation head - loading of feeder from 2 sides possible - feeder pile-height 120 cm - VIVAS special sheet infeed- and alignment system - 1. fold-unit = 4 combiplates (stainless steel) - rear located knife shafts- - KTL- crossfold unit with 2 pneumatic driven high-speed fold-knifes - 1 laying buckle after 1. knife - rear located knife shafts after laying buckle - automatic pocket- and switch blade adjustment - NAVIGATOR -Control with Touchscreen for all functions, settings and presetting-functions - RAPIDSET-basecontrol incl. motorizing of all combi fold pockets - noise hoods and guards on parallel- and cross-fold. - approved and maintenance free, economical and silent belt drive - Palamides Alpa 500 delivery. - special compressor ! - accessories, techn. documentation - machine in excellent condition ! Price under request more pictures and video are available,

Condition: used, The CAT 500 cutting center is an automatic machine designed for cutting PVC profiles using a circular saw. The numerical control unit, together with the management software, allows the programming of machining parameters, leaving the operator with the sole task of loading the bars and unloading the finished pieces. Cutting type: 45° / 90° cutting (left) Adjustable angle cutting Blade specifications: Bore: Ø 30 mm Diameter: Ø 500 mm Speed: 3000 rpm Max thickness: 4.2 mm Technical data: Voltage: 380–400 V AC3PE Current: 8 A Frequency: 50 Hz Power: 3.8 kW Air pressure: 7 bar Bsdpfx Adoy I Twfo Aswl Weight: 2300 kg Standard accessories: Carbide blade Ø 500 mm (Ø30 bore) Electro-welded steel structure with leveling feet and floor anchoring Industrial PC on board the machine Motorized profile pusher with brushless motor Motorized blade rotation (left) with brushless motor Feeding belts with inverter and acceleration/deceleration ramps Label printer Dimensions: Loader: 7900 mm MC: 1000 mm Unloading: 2600 mm Pusher: 6500 mm Max width: 2300 mm Max height: 1700 mm

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Bodpfx Adsy I Tv Uj Aewl Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW

Condition: used, Year of construction: 2008, operating hours: 7,047 h, lifting height: 4,980 mm, free lift: 1,640 mm, fuel type: diesel, mast type: triplex, fork length: 1,100 mm, fork width: 940 mm, total height: 2,230 mm, total length: 3,640 mm, total width: 1,150 mm, color: other, Colour: Pink Empty weight: 4.250 kg Lifting capacity: 2.000 kg - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 12066 - Operating hours: 7047 - Lifting capacity: 2000kg - Lifting height: 4980mm - Overhead clearance: 2220mm - Free lift: 1640mm - Fork length: 1100mm - Maximum fork width: 940mm - Minimum fork width: 550mm - Number of wheels: 4 Wheels - Attachment: Side-shift, Rotator - Options: Work lights, Joystick, Free-lift, Half cabin - Mast: Triplex - Drive: Diesel - Motor brand: Toyota - Transport dimensions: 3640mm x 1150mm x 2230mm (l x w x h) - Transport weight [kg]: 4250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom Bodpfsy I Tvzex Ad Aswl

Condition: new, functionality: fully functional, empty load weight: 540 kg, maximum load weight: 760 kg, overall weight: 1,300 kg, axle configuration: 1 axle, permissible axle load (axle 1): 1,300 kg, loading space length: 3,150 mm, loading space width: 1,640 mm, loading space height: 2,370 mm, total length: 4,450 mm, total width: 2,150 mm, total height: 2,370 mm, suspension: other, tire condition: 100 %, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, Loading dimensions approx. 1640 mm x 3150 mm x 2000 mm External dimensions approx. 2150 mm x 4450 mm x 2370 mm Permissible total weight: 1300 kg Payload: approx. 760 kg (payload varies depending on additional equipment) Manufacturer: Debon Special features - Aluminium box body - Polyester roof and front (aerodynamic) - Pullmann V2 low-floor chassis - Floor panel: aluminium floor (anti-slip) Bwsdpfx Asy I Tvujd Ajl - Door/ramp combination (aluminium) - Shock absorbers fitted, incl. 100 km/h road approval - Lockable side door - Interior lighting with switch - 6 lashing rings on the loading floor - Vehicle documents included Additional equipment - Rear supports - Wheel chocks + holder Chassis - Pullman V2 | Suspension with coil springs and shock absorbers | V-drawbar with ball coupling | Heavy-duty automatic jockey wheel Electrics - 12 volt | 13-pin plug | marker lights | fog light If you would like to purchase this trailer or have further questions about trailers, please use our internal high-loader trailer number "Nr.12412902".