Miles d.o.o.

Condition: excellent (used), Veneer Pack Cutting Machine JOSTING, Type: EFS 2800 L with Cross Veneer Shear KUPER, Type: ZV800 E Machine No.: 10386 Godpfxsx Tfvdj Aa Ijil Cutting length: 2800 mm Insertion height: 80 mm Parallel fence range: 20 - 570 mm Pressure beam: Hydraulic cylinder; 2 pressure stages Knife beam: Brake motor, gearbox, crank mechanism Parallel fence: Three-phase motor, positioning drive Electrical connection: 7.7 kW Footprint (with parallel fence): 414 x 155 cm Height: 170 cm Weight: 3500 kg Cross Veneer Shear KUPER, Type: ZV800 E For trimming veneer packs Machine No.: Cutting width: 850 mm Insertion height: 60 mm Max. blade thickness: 3 mm Motor power: 3.5 kW Footprint x Height (without support table): 112 x 60 x 140 cm Weight: 480 kg

Condition: good (used), Code: 0268 Brand: CASATI MACCHINE Model: TIO 600 Hydraulic veneer trimming guillotine for trimming veneer packs Technical data: Godpfx Ajx If T Eea Ioil Useful cutting length 600 mm Cutting height 55 mm Control unit motor 4 Hp Work surface height 850 mm The machine is operated by a foot pedal, leaving your hands free to move the veneer packs easily Automatic work cycle Overall dimensions mm 1500 x 950 x 1450 h Weight kg 700

Condition: good (used), Code: 0265 Brand: CASATI Model: TM 3100 - CE Standard Automatic mechanical veneer pack guillotine shear with 1 blade - CE Standard Technical data: Cutting length mm 3050 Cutting height mm 45 Automatic shift register Tilting square for cross cuts Full rear register protection Safety photocells Max rear feed width mm 520 Gijdjx H Thnspfx Aa Iol Min rear feed width mm 25 Millimeter counter to read the working cutting Reducer motor Hp 1,5 Power Kw 2 Overall dimensions mm 4100 x 1300 x 1500 h Weight kg 1700

Condition: good (used), Code: 0263 Brand: MONGUZZI Giedpox Hfr Sofx Aa Isl Model: TRC - MP 4200 - CE Standard Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy base structure Large heavy presser for ideal clamping of all types of veneer High-quality steel blade with high wear resistance Can be operated in both automatic and manual modes Hydraulic control unit Second control panel for end trimming Automatic rear register with electronic programmer 1500 mm Cutting length 4300 mm Max register depth 1500 mm Min register depth 25 mm Useful presser opening 80 mm Presser width 360 mm Cutting time 4 sec Safety photocell barriers Power 10 Kw Work surface height 910 mm Overall dimensions : machine mm 5700 x 1300 x 1800 h - Rear register mm 3500 x 2000 x 300 h Weight kg 6500

Condition: like new (used), Working width 3600 mm Maximum height 70 mm Hydraulic cutting Photoelectric safety guard Gjdexz Rmzopfx Aa Isil Motor power 7.5 kW CE certification 400 V Year of manufacture 2022 Weight 6200 kg

Condition: excellent (used), Veneer Guillotine Casati Macchine CIM31 Working length: 3,100 mm Max working height: 45 mm Gjdoxu E Rujpfx Aa Isil Manual fence adjustment Maximum cutting width: 500 mm Safety light barriers

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Gijdpjxgbwzjfx Aa Isl Maximum insertion height: 80 mm FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Ex-works: - available immediately -

Condition: excellent (used), functionality: fully functional, working width 3100 mm Gisdsxdw Rfepfx Aa Iel working height 47 mm manual fence adjustment to size main motor power 4 kW cast iron body safety light barriers power supply 380V

Condition: excellent (used), Year of construction: 2010, Automatic four-side cutter (4 blades) Working area 2300x620 Giedpfxexbhzco Aa Iel

Condition: like new (used), Year of construction: 2012, I sell the veneer saw with moulding premilling router Giedpsxawniofx Aa Iel Manufacturer: Casati Macchine Modell LZ 3100. Year 2012. Cutting length 3100mm. Very good condition. Available immediately.

Condition: good (used), functionality: fully functional, cutting length: 2800 mm rear guide Giodjw D Nq Hepfx Aa Isl

Condition: reconditioned (used), Year of construction: 1985, cutting length (max.): 3,200 mm, cutting width (max.): 450 mm, cutting height (max.): 65 mm, overall weight: 4,800 kg, total length: 5,200 mm, equipped with protective photocell barrier Giodpfjwy Ukqox Aa Iol

Condition: used, functionality: fully functional, cutting length (max.): 1,000 mm, This manual veneer shear is in very good condition and fully functional. It is currently located in Plankstadt near Heidelberg, but will be relocated to Bisperode near Hameln on 19.07.25, unless sold earlier. Gedpfxowylhgj Aa Isil

Condition: good (used), cutting length (max.): 3,600 mm, overall weight: 4,000 kg, Cutting length (max.) 3600 mm Gjdpfx Aaswv Eiis Ioil

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 241 143, cutting length (max.): 3,600 mm, Veneer shears with one blade; length: 3.60 m Gedpfjwql N Sjx Aa Ieil

Condition: good (used), Year of construction: 1981, functionality: fully functional, JOSTING EFS 2600 Veneer Shear Year of manufacture: 1981 S/N 9443 Manufacturer: JOSTING Maschinenfabrik GmbH & Co. KG Model: EFS 2600 Good condition Purpose: Precise cutting and trimming of veneer sheets and veneer bundles Technical specifications: Cutting length: 2,600 mm (effective cutting width) Material thickness: up to approx. 3 mm (depending on veneer type and condition) Drive: Electric motor drive via belt and eccentric shaft Cutting principle: Upper blade moves vertically against a fixed lower blade (guillotine cut) Blades: High-quality high-speed steel (HSS), ground and replaceable Feed mechanism: Manual or optionally pneumatic/hydraulic, depending on the model Table height: approx. 850 mm (ergonomic for Operator) Backgauge: Manually adjustable with scale; Optionally available with digital display or motorized adjustment Operation: Two-hand safety control with emergency stop button Foot pedal for the clamp on certain models Clamp: Mechanical or pneumatic, ensures precise fixation of the veneer stack Safety features: Two-hand operation Emergency stop Protective covers Electrical connection: 400 V / 3 Ph / 50 Hz Giodpfewmxmvjx Aa Iel Power rating: approx. 4–5 kW Weight: approx. 1,800–2,000 kg Dimensions (L x W x H): approx. 3,400 x 1,300 x 1,700 mm Special features: Solid, torsion-resistant welded construction High repeatability for serial cuts Suitable for all common veneer types (beech, oak, maple, exotic woods, etc.) Areas of application: Veneer processing in joineries and Furniture factories Veneer production and sorting Interior and vehicle fittings (e.g., for yachts)

Condition: good (used), Year of construction: 1994, functionality: fully functional, cutting length (max.): 3,100 mm, cutting height (max.): 45 mm, overall weight: 2,300 kg, Veneer shears with a maximum cutting length of 3100 mm Maximum thickness 45 mm Gsdjv Nzpmspfx Aa Isil Built in 1994 With spare blade

Condition: good (used), Code: 0063 Brand: MONGUZZI Model: TRA-OLM 2600 - Norme CE Automatic hydraulic veneer guillotine with 1 blade - CE Standard Gsdpfx Aaev Igtbe Ioil Technical data: Sturdy structure essential to guarantee a precise and quality cut Pressure and lowering speed of the presser and blade holder independently adjustable via hydraulic valves Cutting length mm 2650 Presser opening mm 80 Cutting execution time 4 sec Presser width mm 340 ideal for blocking any type of veneer Cutting display light Photocells and safety barriers Installed power Kw 10 Work surface height mm 930 Automatic numerically controlled rear register with programs Sliding on quality linear guides Side button panel for processing the end cutting side Rear safety nets Overall dimensions of assembled machine mm 4100 x 2450 x 1750 h Machine dimensions for transport mm 4100 x 1800 x 1750 h Weight kg 4000

Condition: excellent (used), Year of construction: 1992, I sell the double knife veneer guillotine Josting ZFS 2800. Year 1992 / fully reconditioned 2007. Cutting length 2810mm. Cutting height 80mm. Cutting width 20-470mm. Gijdpfx Aovxli Aja Iol Very good condition. Available immediately.

Condition: repair required (used), Year of construction: 1997, Brand: Casati Model: Z1000 Giedpfx Aevw Tnkea Isl Machine no: 9709021 Year of manufacture: 1997

Condition: excellent (used), functionality: fully functional, cutting length (max.): 2,050 mm, cutting width (max.): 680 mm, cutting height (max.): 60 mm, overall weight: 2,500 kg, total length: 3,300 mm, total width: 1,700 mm, total height: 1,500 mm, Hydraulic guillotine MONGUZZI tro 2050 Specification: Godpfxovug U Eo Aa Ieil • condition - used • manufacturer - MONGUZZI • model - TRO 2050 • max working width - 2050 mm • max working height - 60 mm • max width of the cut element - 680 mm • min width of the cut element - 37 mm • main engine power - 4.0 kW • start-up 0-1 • analog cutting width indicator • knife length - 215 cm • feed width - 211 cm • photocell protecting against putting hands under the knife • manufacturer's documentation and spare knives - used • weight - approx. 2,500 kg • dimensions - 330 x 170 x 150 cm (length x width x height) Additional information: • the machine is in perfect technical condition, ready to immediate use • the photos shown show the actual condition of the item for sale • the device can be switched on and checked on site. • the price given in the auction does not include VAT and transport costs

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 209070, CASATI BIT 900/2000 veneer cross-cutting machine. Fully functional. Gsdsuna E Hopfx Aa Isil

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 10108, cutting length (max.): 2,900 mm, cutting width (max.): 530 mm, CASATI BIG 2600 - Double knife veneer scissors. Machine is 100% functional. Godeum Rpgspfx Aa Ioil

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 181206, cutting length (max.): 3,100 mm, cutting width (max.): 520 mm, MONGUZZI AFD S35/3000 Gedoumwb Nopfx Aa Ieil

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 00359, cutting length (max.): 2,300 mm, cutting height (max.): 30 mm, Monguzzi 2300 TRC MP - Veneer scissors Defect - oil i leaking a little from the hydraulics. Fully functional. Gijdpfxjumvvro Aa Ijl