Tischlerei Findeklee

Condition: ready for operation (used), Shelf length: 3000 mm Shelf width: 1300 mm 6 hydraulic cylinders Clearance: 450 mm Press – cold, without heating Weight: 2200 kg Dcjdpfx Adjy N St Us Njg

Condition: excellent (used), functionality: fully functional, Shelf length 3500 mm Shelf width 1300 mm New aluminium shelves 6 hydraulic cylinders Piston diameter 70 mm Water heating Ground clearance 390 mm Safety rupture link Djdoy N Rdrspfx Ad Njcg Year 1999 Weight 4400 kg

Condition: excellent (used), functionality: fully functional, Shelf length 3500 mm Shelf width 1300 mm Number of pistons 8 Clearance - 430 mm Oil heating - built-in heater Piston diameter - 85 mm Djdpfx Aoy N Rdfsd Necg Safety switch - breakaway Weight - 4600 kg

Condition: excellent (used), functionality: fully functional, Shelf length 3000 mm Dcedpfx Aoy N Rc Uod Njg Shelf width 1300 mm Number of pistons 6 Clearance - 470 mm Water heating Pneumatic side pressure Piston diameter - 80 mm Safety switch tear-off

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 3,600 kg, Shelf length: 3000 mm Shelf width: 1300 mm Clearance: 400 mm 6 hydraulic cylinders Piston diameter: 85 mm Machine control via touch panel Dodpfx Asy N Rczsd Necg Built-in electric oil heating Electric time-controlled opening Safety breakaway cable Year of manufacture: 2025, NEW Control system: logic control Overall dimensions: Length: 360 cm Width: 160 cm Height: 203 cm

Condition: like new (used), functionality: fully functional, - Shelf length: 3000mm - Shelf width: 1300mm Dcodpoy N Rcusfx Ad Nsg - Clearance: 340mm - Number of pistons: 6 - Piston diameter: 80mm - Oil heating - Hydraulic side pressure - Emergency stop – pull cord

Condition: ready for operation (used), functionality: fully functional, plate length 3500mm plate width 1300mm two inserts water heating - needs to be connected to heater 8 hydraulic pistons pistons diameter 85mm span between plates max 460mm Dcedpfxoy N Rcne Ad Nsg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, plate length 3000mm plate width 1300mm oil heating with electric heater 6 hydraulic pistons pistons diameter 85mm plates span 650mm pressure 3kg/cm2 Djdey N Rchepfx Ad Njcg pump motor power 2,2kW

Condition: good (used), Code: 0381 Brand: OMC - ITALY Model: PL/160 - CE Standard Dodpfsy Nkuwox Ad Nocg Hydraulic hot press with solid platens, heated by an electric oil boiler, for panels, veneer, woodworking, furniture, custom-made furnishings, wooden doors, composite materials, and various - CE Standard Platens dimensions 3500 x 1300 mm Solid steel perforated platens N°1 intermediate platen Max temperature 250°C Opening 400 mm N° 8 pistons - diameter 85 mm Specific working pressure 30/40 kg/cm² Total thrust 160 tons Heating by 3 diathermic oil boilers Safety devices: perimeter safety cable, emergency stop button, two-hand control Automatic opening with timer Control panel Motor 3 Hp Power supply: 400 V / 50 Hz Overall dimensions mm 4200 x 1600 x 2250 h Weight kg 5500

Condition: good (used), Code: 0378 Brand: ORMAMACCHINE Model: NPC 6/90 E - Norme CE Hot press with electric platens for veneering, panels, furniture, custom-made furnishings, wooden doors, kitchens, bathroom furniture, composite materials, plastics, and various - CE Standard Technical data: Platen dimensions 2500 x 1300 mm Total thrust 90 tons N° 6 cylinders Cylinder diameter 70 mm Dodpfxoy I Tqrs Ad Necg Stroke 400 mm Pressure 3 kg/cm² Motor 2 Hp Electric Platens: Max temperature up to 120° C, max working pressure 7 kg/cm². Platen made of a 12 mm aluminium plate which resistances are inserted in underneath a chipboard support with reinforcement tubes inside Perimeter emergency rope Double rack system Lateral guides on platens for a perfect movement further safety feature of the pressing platen Overall dimensions mm 3060 x 1650 x 1850 h Weight kg 3400

Condition: good (used), Code: 0374 Brand: ITALPRESSE Model: V/4 Mechanical cold press for wood, panels, doors, furniture, composite materials, technical materials, plastics, aluminium and various other materials Working dimensions 2200 x 1000 mm Dcodpfxsy If Rwj Ad Njg Platen dimensions: n° 2 platens 1100 x 1000 mm NEW aluminium sheets Option to work on a single table or on separate tables Opening 650 mm N° 4 pressure screws N°2 motors 0,75 Hp each Overall dimensions mm 2550 x 1000 x 1650 h Weight kg 870

Condition: used, Year of construction: 1978, used Manufacturer: Ott Type: JU60 Year of manufacture: 1978 Machine no.: 10838 Dodpfxsy H N Tgs Ad Necg GS-certified Panel size: 2200 x 1100 mm Maximum opening: 300 mm Tip control Safety rope Electric heating Piston diameter: 80 mm 4 lower pistons Required space approx. 2600 x 1300 x 1900 mm Location: 97447 Gerolzhofen, free loaded, unpacked Transfer as seen, in current condition No warranty or guarantee

Condition: excellent (used), Year of construction: 1998, Equipment: CE marking, Ott JU 2511 Hydraulic veneer press with electric heating plates Gold eloxal electric heating plates Two-stage hydraulic pump with automatic switching valve from low to high pressure Safety tear-off cord Rack compensation CE compliant Pressing area: 2500 x 1100 mm Number of press cylinders: 4 Total pressing force: 70 t Lift height: 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total power consumption: approx. 16.1 kW Dismantlable design Space requirement (L x W x H) approx.: 2960 x 1250 x 1955 mm Weight: approx. 2900 kg Year of manufacture: 1998 Price: €6,500 • Technical data subject to change and prior sale reserved. • Prices quoted are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Dsdpfxsy Hbw Re Ad Nscg Buyers are welcome to inspect the machine on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: used, working width 750 mm working length 3.000 mm length ~ 3.850 mm width ~1.000 mm height ~ 2.000 mm Hydraulic veneer press Ott type 300 K75 for gluing veneers, timbers, beams or other pressing tasks. Heating plates without function. Dcodpfx Adoy Eryme Nsg

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Pressing pressure can be infinitely adjusted via pressure switch two-stage hydraulic pump Rack compensation Main switch Safety pull cord CE marking Pressing area: 2550 x 1350 mm Opening height: approx. 350 mm Number of pressing cylinders: 4 Dedpfx Asy Egkged Nscg Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3,200 kg Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: used, table width: 1,400 mm, table length: 2,800 mm, total length: 6,600 mm, total width: 2,500 mm, total height: 2,600 mm, No. 3266 Feed-through veneer press Ott D 99 Used Short-cycle feed-through veneer press Pressing surface 2600 x 1400 mm LW Maximum opening width 150 mm Specific pressure 5.0 - 6.0 kg/cm2 Infeed conveyor belt, length 2800 mm Outfeed conveyor belt, length 2800 mm Transport dimensions approx. 6600 x 2500 x 2600 mm LWH Dcodpfx Adjy A Rhks Njg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, Year of construction: 1992, machine/vehicle number: 15261, functionality: fully functional, operating hours: 700 h, table width: 1,100 mm, table length: 2,500 mm, total length: 2,750 mm, total width: 1,335 mm, total height: 2,050 mm, year of last overhaul: 2008, Equipment: CE marking, documentation/manual, safety light barrier, The press is in operation and works perfectly. The reason for sale is business closure. Dodpfxoy A Npyj Ad Necg

Condition: used, Year of construction: 1993, Press area: 3000mm x 1900mm Press depth: Press elements vertical: 3 Press elements horizontal: 2 Dsdpfjy A Hkzsx Ad Nocg Pressure system: electrohydraulic Press pressure: per cylinder Cylinder stroke: mm Hold-down device: no Machine length: 3500mm Machine width: 1000mm Machine height: 2600mm Weight: approx. 900kg

Condition: used, Year of construction: 1979, Press length: 3000 mm Dodpfx Adey A Hkhe Necg Press depth: Vertical pressing elements: 6 Horizontal pressing elements: Pressure system: pneumatic Pressing pressure: per cylinder Cylinder stroke: mm Hold-down device: no Machine length: 2700 mm Machine width: 1000 mm Machine height: 1400 mm Weight:

Condition: used, Year of construction: 1979, Pressing area: 2200 mm x 1100 mm Opening: 360 mm Heating: electric Dcodpey A Hkbjfx Ad Njg Plate surface: aluminium Emergency stop: no Pressing force: 65 t Number of cylinders: 4 Power consumption: 21 A Machine length: 2500 mm Machine width: 1300 mm Weight: 2600 kg

Condition: used, pressing force: 100 t, table width: 1,350 mm, table length: 2,550 mm, total length: 3,150 mm, total width: 1,550 mm, total height: 2,150 mm, overall weight: 5,000 kg, No. 04525 Veneer press Ott 300 K 2513 Used Very sturdy design with 4 longitudinal beams in the upper press section and 4 longitudinal beams in the press table Djdpjy Aplzjfx Ad Njcg Plate dimensions 2550 x 1350 mm LW Total pressure 100 tons Electric heating, replaceable heating elements Heating plates made of solid aluminum, covered with Mylar film Maximum temperature 150 °C Specific pressure 3.0 - 5.0 kg/cm2 4 press cylinders, each 90 mm in diameter Rack-and-pinion guide for the press table Button controls for Open – Close – Stop Circumferential emergency stop pull cord, configured for two-hand operation Opening width continuously adjustable up to approx. 420 mm Automatic pressure regulation via high-pressure gauge Pressure preselection table with 2 specified values for each workpiece size Transport dimensions approx. 3150 x 1550 x 2150 mm LWH Weight approx. 5000 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: Ex warehouse

Condition: used, Year of construction: 2008, machine/vehicle number: 10322T, functionality: fully functional, pressing force: 120 t, stroke length: 355 mm, table width: 1,560 mm, table length: 3,100 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,080 mm, overall weight: 9,000 kg, Equipment: documentation/manual, We offer this used Interwood HOP veneer press, year of construction 2008. Location: Maryport, Cumbria, UK Djdpey Ah T Refx Ad Necg 18000GBP (with VAT) 15000GBP exVAT Open to offers 20m cable and distribution box included in price. Type: HOP Serial number: 10322T Year of manufacture: 2008 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Technical data: Number of pistons: 6 Piston diameter: 80 mm Connection to central heating (CO) Shelf dimensions: 3000x1300 mm Clearance: 395 mm Hydraulic pressing 6 pneumatic side clamps Dcsdpfx Asyz T Ansd Njg Safety switch Motor power: 1.5 kW Power supply: 400 V Overall dimensions: Length: 3650 mm Width: 2100 mm Height: 2040 mm

Condition: ready for operation (used), functionality: fully functional, hydraulic PRESS with hot platens by with thermal oil model COLOMBO REMO HPC 8-160 second hand machine DRILLED SOLID STEEL PLATEN for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3450 x 1400 new hydraulic pump . replaced in year 2019 n.8 cylinders diam.mm. 90 Dedjyyzwdspfx Ad Nscg max. thrust Ton. 160 intermediate worktop ( 3 worktops , 2 work compartments ) hydraulic pump motor power Hp 4 heating by with thermal oil weight kgs. 10.000 volt. 380/50

Condition: good (used), Year of construction: 1982, Plate dimensions 2200 x 1100 mm Daylight opening 350 mm Number of daylights 1 St. Heating elektrisch Total pressure 65 to Motor output 1,1 kW Dimensions (L/W/H) 2540 x 1280 x 1900 mm weight of the machine ca. 2500 kg Dsdpfx Asyyqnxjd Nscg