W. Eble + Co.

Condition: used, Year of construction: 1999, grinding diameter 350 mm grinding length 540 mm centre height 175 mm 2015 wurde bei Studer der WSS, Reitstock und Werkstücktisch überholt 2024 Austausch KGT von X+Z- Achse durch Studer Kühlmittelanlage mit Magnetwalze Werkstückspindelstock Reitstock Meßsteuerung Auswuchtgerät Dittel Lünette Itodpfx Aexyadged Dep PCU-Terminal

Condition: used, Year of construction: 1995, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Itodpfx Ajxyadasd Dsp 2013 generalüberholt Verstärkter Werkstückspindelstock Ohne Reitstock kann aber nachgerüstet werden Ohne das Futter und ohne die Lünette auf dem Foto Control Kelco 90

Condition: reconditioned (used), KELLENBERGER KEL-VISTA UR 175X600 is a CNC cylindrical grinder engineered for precision, high accuracy and reliability. Capacity: centre height 175 mm; between centres 800 mm; grinding length 600 mm; max Ø 349 mm; max weight 100 kg. Key specs: Z 750 mm; X 320 mm; left wheel Ø400×80×127, right Ø300×40×127; wheel speeds 875–1900 rpm (stepless); wheel motor 5 kW; work spindle 8–800 rpm (stepless), taper 5 CM; rapid 12 m/min; air 6 bar; 3×400 V 50 Hz; machine ≈3000 kg; 3200×1700×2000 mm. Accessories: coolant, coolant-through-spindle (IKZ), paper filter, MARPOSS probe, MOVOMATIC measuring control, internal grinding attachment, balancing, RS‑232. Suited for tight tolerances in automotive, watchmaking, machine tools, aerospace, medical. Itodpfoxx U Taox Ad Dsp

Condition: reconditioned (used), KELLENBERGER 600 U 175 is a cylindrical grinder of high precision, offering accuracy and reliability. Capacities: centre height 175 mm, between centres 600 mm; wheel Ø350×50 mm, bore 127 mm; wheelhead 270°. Specs: wheel speeds 1500–3600 t/min (4 steps); work spindle 20–400 t/min (stepless); table tilt 10°, up to 6 m/min; supply 3×380 V 50 Hz; wheel motor 4 CV; weight ≈2200 kg; dims 3000×1750×1600 mm. Accessories: digital readout (2 axes), tailstock fine adjust, internal grinding attachment, wheel guard, safety device, sliding door. Suited to tight tolerances in automotive, watchmaking, machine tools, aerospace and medical sectors. Itsdpsxx U H Tofx Ad Dep

Condition: used, STUDER S41 is a CNC cylindrical grinder engineered for precision, high accuracy and reliability. Capacities: centre height 275 mm, distance between centres 1000 mm, max workpiece Ø 550 mm, workpiece height 1000 mm, Z 1150 mm, X 350 mm, workpiece weight 250 kg. Specs: grinding wheel Ø500×100 mm, peripheral speed 50/80 m/s, spindle speeds 0–4500 rpm, wheel head swivel -45/+225°, workpiece spindle motor 15 kW, 3x400 V 50 Hz, air 5 bar, tailstock stroke 60 mm (Ø 60 mm), machine weight ≈9000 kg. Accessories: high‑res C‑axis, B1+B2 axes, coolant system, internal grinding attachment, 2 spindles, lamp, status light, PC system, electronic handheld control, foot pedal. Achieves tight tolerances; typical in automotive, aerospace, toolmaking, medical and watchmaking. Isdpfx Ajxx U Dfed Detp

Condition: used, Cylindrical Grinder. VEB SA 200x800, Használt gép Itodexx Sixjpfx Ad Dsp Manufacturer: VEB, WMW Werkzeugmaschinen GmbH Model: SA 200x800 Overall Dimensions: 3070 x 1480 x 650 mm Year: 1960 Weight: 4.1 t Grinding Wheel Diameter: 400 x 15 mm Center Distance: 800 mm Table Size: 1000 x 200 mm Electrical Data: 380 V; 15 A; 6 kW

Condition: refurbished (used), Completely overhauled Studer cylindrical grinding machine Itjdoxxy A Topfx Ad Dsp Centre distance: 650 mm Technical data and accessories as per photos and PDF.

Condition: used, Year of construction: 2000, machine/vehicle number: 120138, center height: 180 mm, Schaudt CF 41 CBN 600 D CNC Grinder Center height 180mm, dia 200 x 600mm, one grinding slide / travel 150mm, CNC SIEMENS SINUMERIK 840D, LxWxH, ca. 3 x 2 x 2m, weight, ca. 6,5to Ijdpfxsxxyt Ee Ad Dotp

Condition: used, Year of construction: 2000, machine/vehicle number: Pulsar HS-150RAS, Tacchella Pulsar HS-150RAS CNC Angle Approach Cylindrical Grinder Ijdpsxxyqkefx Ad Detp dia 250 x 800mm, VM24 grinding wheel balancing system, MARPOSS InProcess measuring unit, CNC SIEMENS SINUMERIK 840D

Condition: defective spare-parts repository (used), We offer you: Cylindrical grinding machine Manufacturer: Karstens For spare parts The main spindle grinding head is missing Accessories, illustrated tools, and clamping devices are only included if stated in the additional information. Ijdoxxxrtspfx Ad Dstp Subject to changes and errors in technical data and details, as well as prior sale!

Condition: ready for operation (used), Year of construction: 2005, Immediately available from site: CNC Cylindrical Grinding Machine TOS HOL – MONTA Type UN 63 / 750 / 2000 Year of manufacture: 2005 CNC Control: Sinumerik 840 Di Centre height: 375 mm Grinding diameter: 750 mm Grinding length: 2000 mm Grinding wheel dimensions: 750 x 100 x 305 mm Swing diameter in open steady rest: 40 – 250 mm Tailstock Morse taper: 6 Table swivelling: 4 degrees Workpiece spindle speed range: stepless, 1 – 50 rpm Grinding wheel speed: 20 – 33 m/sec Grinding spindle motor: 19 kW Iodpfxjxxuuqe Ad Dstp Total power requirement: 41 kW Workpiece diameter control Full enclosure Grinding mist extraction Weight: 20 t Complete accessories Price: EUR 28,500.— plus VAT, ex site

Condition: good (used), Year of construction: 1974, Ref. -No.: 10159 Manufacturer: KELLENBERGER Type: 1000 U Year of construction: 1974 Storage location: Halberstadt Country of origin: Schweiz Grinding Length: 1000 mm Grinding Diameter: 250 mm Ijdpfxexxn Udj Ad Dstp

Condition: used, Distance between centers: 1000 mm Maximum external grinding diameter: 320 mm Grinding wheel dimensions (OD x ID x width): Ø500 x Ø127 x 80 mm Maximum internal grinding diameter: 200 mm Center height: 175 mm Control type (CNC/manual): CNC CNC brand: FANUC CNC model: 16GC Maximum grinding length: 1000 mm Itsdpfxjxxmcgo Ad Dsp Maximum workpiece weight: 130 kg Main motor power: 7.5 kW / 2870 rpm Total power: 30 kW Internal grinding spindle power: 15 kW Max. workhead spindle speed: 30 - 750 rpm Voltage: 380 V / 50 Hz X-axis feed: 0.0001 – 5,000 mm/min Z-axis feed: 0.0001 – 10,000 mm/min Air pressure: 1.5 - 3 bar Coolant flow rate: 100 L/min Max. Z-axis travel: 1050 mm Max. X-axis travel: 275 mm Max. worktable swivel: 8.5º Workhead internal taper: M 5 Tailstock taper: M 3 Tailstock quill travel: 35 mm Dimensions (L x W x H): 3,687 mm x 2,000 mm x 2,090 mm Weight: 5,200 kg

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm supply voltage 3 x 400 V control voltage 24 V Overhauled in 2025 Delivered in april 2025 Equipment at delivery in 2004: Sanding disc equipment: left: 400x63x127mm (standard) right: 300x40x127mm B-AXIS: ‘CNC-controlled B-axis’ (standard with UR) Drive power of grinding head motor: 7.5 kW CNC control KELCO 115; : v constant 35m/s or 45m/s_adjustment n Grinding spindle by control_(standard) CNC control KELCO 115 upgraded to C-axis operation. (No polygon grinding) Ijdpfsxwzawsx Ad Detp Pneumatic quill retraction for the tailstock Tailstock with micro-adjustment Maintenance unit for pneumatic relief Fine adjustment of the top table Standard workpiece headstock MK 5 DIN 55026 size 5’ GROSS ADJUSTMENT: ‘Swivelling lower part for the standard workhead’ KELPOS: Active longitudinal positioning MOVOMATIC, mounted on the grinding head GAP : Gating sensor MOVOMATIC Combined MOVOMATIC measuring controller, CR 100 measuring head and TMP 91, ES 124 Additional housing for control panel KELSET : Tool measuring system KELSET, MARPOSS Preparation for connection to a central coolant system incl. solenoid valve solenoid valve Half panelling (standard) B-AXIS: ‘CNC-controlled B-axis’ (standard for UR) Data of the delivery condition. No guarantee of completeness

Condition: used, Year of construction: 2000, controller manufacturer: Heidenhain, controller model: Heidenhain 1830 M - KELCO 120, _____ Description: Year of manuf. : 2000 Control : Heidenhain Heidenhain 1830 M - KELCO 120 Grinding length : 1000 mm In General: YOM::2000 - Retrofit 2024 Controller:Heidenhain 1830 M - KELCO 120 Workpiece headstock: Swivelling range:-10°/+100° Speed:600 rpm Centre height:250 mm Internal mounting cone:MK5 Short taper outside:DIN 55026 Workpiece weight max.:150 kg Grinding headstock: Iedpsxwgh Hjfx Ad Dotp Design:Tandem grinding headstock B-axis:-210°/+30° Internal grinding device:Internal grinding spindle Grinding table (X-axis): X-axis:320 mm Max. speed:7.5 m/min Resolution:0.1 μm Lower table (Z-axis): Centre distance:1,000 mm Z-axis:1,150 mm Max. speed:15 m/min Resolution:0.1 μm Equipment: Coolant supply:Coolant system with filter Emulsion mist separator:Mechanical Tailstock:MK4, stroke 50 mm Workpiece measurement:Marposs T25 :Tool measurement Marpos A 90 Set-up mode:Electronic handwheel Chuck:3-jaw chuck, magnetic chuck

Condition: like new (used), Year of construction: 2021, operating hours: 7,500 h, functionality: limited functionality, FOR SALE Grinding Machine Brand: STUDER Model: S 110 Year: 2021 CNC FANUC Isdpsxwbdpofx Ad Dstp

Condition: good (used), Year of construction: 1988, Ref. -No.: 10396 Manufacturer: KELLENBERGER Type: 600 U - Nr. 40 Year of construction: 1988 Type of control: Konventionell Control: N/A Storage location: Halberstadt Country of origin: Switzerland Itodpfx Asxvw E Ted Dsp Distance between center: 600 mm Center height (standard): 125 mm Height of centers by lifting work blocks head and tailstock: 175 - 250 mm Swing diameter with lifting blocks max.: 350 - 500 mm Table swivel / each side: 10 ° Dwell time of the table reversal: 0 - 5 Sec Diameter / width / hole: 250 x 13 x 76 mm Speeds of the grinding wheel spindle: 1500/1700/2200/3600 Swiveling grinding wheel head: 360 ° Cross movement of the grinding wheel head: 285 mm Quickly pulling the wheel head back and forth: 40 mm Intermittent injection for each reversal of the table: 0,001 - 0,03 mm / dia Micro-corrector of the feed, 1 division of the dial: 0,001 mm / Ø Working speeds continuously adjustable (normal / special): 20-400/10-400 Max. Grinding length: 900 mm

Condition: used, Year of construction: 2000, grinding diameter: 340 mm, workpiece weight between centers: 80 g, controller manufacturer: GE FANUC, controller model: 16IT, CONTROLS .. CNC controls GE FANUC 16IT WORKING RANGE CYLINDRICAL GRINDING .. swing diameter (max): 340 mm .. workpiece weight between centers (max): 80 kg WORKING RANGE EXTERNAL GRINDING .. grinding diameter (max): 340 mm .. grinding length: 650 mm WORKPIECE SPINDLESTOCK .. c-axis: yes TAILSTOCK .. distance betw. centers (max): 650 mm SPINDLESTOCK GRINDING SPINDLE .. X-axis travel: 370 mm .. Z-axis travel: 800 mm .. tilting range (B-direction) min: -30 ° .. rotating range B-axis up to: 225 ° .. spindle revolutions (min): 1 /min .. spindle revolutions (max): 1500 /min GRINDING TOOL .. type of grinding tool: wheel .. diameter (max): 500 mm .. borehole: diameter: 203 mm .. width: 63 mm SPINDLESTOCK INTERNAL GRINDING .. spindle revolutions (max): 30000 /min ELECTRICAL SPECIFICATIONS .. mains power supply: 20 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 5000 mm .. total weight approx.: 9500 kg ATTACHMENTS (GRINDING) .. internal grinding spindle: yes Equipment: 2 external grinding spindles 1 internal grinding spindle Fischer MFV 1230, 30000 1/min Itjdpfxoxun E Uo Ad Dop - C-axis for curve or polygon grinding (incl. HSM option) - Dressers: 1x fixed diamond on the tool holder, 1x dressing spindle on the tool holder, 1 swivel dresser - Studer Quickset, - Movomatic ES400 connection for measuring unit, (without measuring probe) - 1 tailstock, - 1 swivel dresser, - The machine can be converted to a jaw chuck - No water treatment, as it is installed on a central system

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - center height : 175 [mm] - X/Z stroke : 285/1150 [mm] - Axis X programmable feed speed : [mm/min] - Resolution : 0.0001 [mm] - Axis Z programmable feed speed : [mm/min] - Resolution : 0.0001 [mm] GRINDING WHEEL HOLDER HEADSTOCK - Orientation : 0/30 [°] Isdpfxjxt U Rhs Ad Djtp * Grinding wheel dimensions : 500x63 [mm] PART-HOLDER HEADSTOCK - Type of cone : ISO50 - TAILSTOCK POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of hours under power : 28230 [h] EQUIPMENT - CNC : FANUC Oi-TD - Electronic handwheel - Automatic diamond device - Coolant tank * with paper filtering unit

Condition: used, Year of construction: 2006, grinding diameter 250 mm grinding length 1000 mm Control Kavalir K 51 peripheral speed 25 - 45 m/sec Ijdexrvmnopfx Ad Detp max. workpiece weight between centres 80 kg voltage 400V AC 50 Hz control voltage 24V AC/DC current -Sicherung für Zuleitung 35 A weight of the machine ca. 3,8 t

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2026, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Itjdpfx Aoxrtarod Dsp Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Cylindrical grinder STUDER S20-2 Iedpfx Adjxrg Hxo Djtp

Condition: good (used), Year of construction: 1968, Cylindrical grinding machine, manufacturer: STANKOIMPORT, type: XC3, year 1968, with accessories. Model: 3A 161. Centre height: 161 mm, grinding diameter: 322 mm. Centre distance/grinding length: 1000 mm. In good condition. Ijdpfx Asxq Tlrod Djtp

Condition: used, External/Internal Cylindrical Grinding GENDRON RU 28.100 Between points: 1000 mm Maxi grinding diameter: Ø 290 mm Tool holder rotation: from 70 to 370 RPM 4-jaws Ø 200 mm chuck Grinding wheel: Ø 300 mm Auto pass plug Swivel table Itodpfx Adjxqqkle Dep External hydraulic group External lulbricant tank Voltage: 380 V Dimensions (L x W x H): 3000 x 1900 x 2000 mm Weight: approx 3 T

Condition: used, center height in crank: 125 mm, workpiece diameter between centers: 1,300 mm, pivoting range: 9 °, Cylindrical Grinding Machine Kellenberger 51 HU Center height: 125 mm Distance between centers: 1200 mm Work table surface: 1590 x 140 mm Surface grinding: 1300 x 200 mm Table longitudinal travel, manual and automatic: 1300 mm Table swivel: 9° Workhead: Speeds, 5 steps: 50–400 rpm Swivel: 360° Internal taper: MT5 Tailstock: Internal taper: MT3 Quill stroke: 18 mm Grinding spindle head: Cross travel: 320 mm Swivel: 360° Spindle speeds, 3 steps: 2000, 2400, and 3650 rpm Grinding wheel: 300 x 25 x 127 mm Ijdpfxexpif Eo Ad Dotp Motor: 3.5 HP Internal grinding attachment: Spindle speed: 14,000 rpm Machine weight: 1950 kg Ask quote with transportation !