Ideen nach Mass

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Tilting Spindle Moulder MARTIN T25 Very good condition, the machine comes from a very small joinery workshop that was closed due to retirement. Everything works perfectly. All bearings and guides are in good condition. Year of manufacture: 1997. The fence on the moulder allows adjustment of the fence jaw depth, with fine adjustment and a mechanical counter; this makes it possible to perform trimming work, e.g. on a gluing profile. The entire fence can also be moved in depth using a handwheel and leadscrew, and a second mechanical counter allows for highly precise and quick settings. Equipped with spindle lock via lever. Chip extraction is excellent, with 2 extraction ports: 125 mm at the fence and 100 mm at the machine table. Comes with a 30 mm spindle, infinitely tiltable from -5° to 45°. The spindle tilt is electrically controlled with a highly accurate display. Features right/left rotation. Nationwide delivery and on-site demonstration within Germany by us for €220, so you have no risk when purchasing. Shipping to Austria and the rest of the EU possible on request. Large table opening up to 480 mm, reducible with various rings (enabling the use of cutters with very large diameters; also ensures safe operation with small cutters). Spindle speeds: 3000, 4500, 6000, and 9000 rpm. Spindle height adjustment is also electric, with a very precise display. The table is made of heavily ribbed grey cast iron. Exchangeable spindle (a 40 mm spindle can also be used). Very robust, durable construction – built for the heaviest milling operations; suitable for all milling tasks. Optimal power transmission via V-belt drive. Comes with manual/operating instructions. Ndodpexy S Eiofx Aduod Includes 3-roller power feed HOLZ HER, type 1117. The power feed has right/left operation and 8 speeds. The feed rollers are individually mounted. The machine table is 1180 mm wide and 800 mm deep, plus 2 table extensions on the left and right (each 600 mm wide); there is also a pull-out support. Ready to use immediately. 380V, 5000W and 6000W thanks to 2 speed settings. Equipped with all necessary safety devices, motor brake and emergency stop. The machine is certified by the woodworkers’ employers’ liability insurance association and has a CE mark. The machine weighs approx. 1200 kg. With motor protection switch against overload. Professional machine, not DIY store quality. Optimal, simple, fast and safe handling.

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical specifications: - Spindle clamping length: 180 mm - Spindle tilt: -10° to +45° - Motorized spindle stroke with fine adjustment - Motorized spindle tilt - Motor: 5.5 kW - Table size: 1200 x 730 mm - Largest table opening: 420 mm - Motor brake Ndjdpfxexwz Rce Aduod - Speeds: 3000/4500/6000/7000/10000 rpm - Speed display - Extraction port: 125 mm - With Aigner integral fence - With 3-roller power feed Availability: approx. mid/end of January 2026 Location: Hesse

Condition: good (used), Year of construction: 2009, functionality: fully functional, Spindle diameter 30 mm Tiltable on both sides from -45.5° to +45.5° Motorized height and tilt adjustment Infinitely variable speed adjustment from 1,500 to 10,000 rpm Table size 1100 x 760 mm Motor power 7.5 kW Control panel on top Cast iron fence jaws Height adjustment 125 mm Extraction ports 2 x 120 mm Weight approx. 900 kg WITHOUT power feed unit Ndsdpfx Adjxuniyoued The machine will be available from approx. January 2026

Condition: ready for operation (used), Year of construction: 1968, Tilting spindle moulder Holz-Her power feed with three rollers Manual height and tilt adjustment Njdsxqy Iyjpfx Adujdd Technical specifications available on request All information provided without guarantee

Condition: excellent (used), Year of construction: 1994, Holz Her Tilting Spindle Moulder with Holz Her Power Feeder Table extension on both sides with pull-out stop Swiveling spindle: Yes, -5 to +45° Height adjustment: manual Tilting adjustment: electric Fence adjustment: manual Height display: digital Tilting angle display: digital Fence position display: scale Spindle diameter: 30 mm Speeds: 1500, 3000, 4500, 6000, 9000, 12000 rpm Motor power: 5 / 6 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 1950 mm Ndjdpfx Adsxpm Evsued Machine depth: 1400 mm Weight: approx. 1100 kg Holz Her Power Feeder, type 1112 – 4 rollers Location: Ex stock 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Specifications and technical details: Spindle adjustment: –5° to +45° Spindle adjustment: electric with digital display Ndodpfx Asxiztzjdusd Height adjustment: electric with digital display Fence: with digital display Spindle diameter: 30 mm (MK-5 taper) Motor output: 11 kW Speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Table size: 1,340 × 800 mm Table extension: on both sides, with pull-out frame support Dimensions: 2,540 × 1,350 × 1,850 mm Weight: approx. 1,000 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Condition: fully overhauled Features and technical data: - Table size: 1100 x 760 mm - Motor: 4.7/5.7 kW, pole-switchable - With forward/reverse operation - Milling spindle: MK 5 / 30 mm - Height and tilt adjustment via handwheel - Spindle speeds: 3000/4500/6000/9000 rpm - Spindle tilt range: -5 to +45° - Milling fence with metal jaws - Mounted on round insert plate, therefore rotatable 360° - With table extension on both sides with retractable frame supports - Equipped with 4-roller power feed unit Weight: approx. 900 kg Ndsdpfsw I U U Dex Adued Images show the machine in unrefurbished condition Availability: approx. 4 weeks after order placement Location: Flörsheim

Condition: new, Year of construction: 2024, functionality: fully functional, milling spindle length: 140 mm, height adjustment type: electric, tool diameter: 30 mm, pivoting range: 45 °, spindle speed (min.): 3,000 rpm, spindle speed (max.): 9,000 rpm, spindle height adjustment: 125 mm, spindle diameter: 30 mm, Exhibition Machine Robust Swivel Spindle Moulder PANHANS 245|20 enables precise machining of wood and plastics Ndsdpfjw I Tw Dex Adued - Powerful 5.5 kW three-phase motor - Four spindle speeds (3,000, 4,500, 6,000, and 9,000 rpm) selectable by repositioning the belt using a practical quick-tension system - Motorized height and swivel adjustment - Integrated touchscreen control - Spindle height adjustable by 125 mm and swivels from -5° to +45.5° - Tool changes facilitated by quick-release system - Precision-planed table 1100 x 760 mm - Includes spindle guard and pressure device, curve routing fence, and all required safety equipment - Machine socket for optional power feed unit Technical Data Table size: 1100 x 760 mm Table height: 870 mm Spindle with quick-clamp nut: 30 mm Clamping height: 140 mm Height adjustment: 125 mm Swivel range: -5° to +45.5° Spindle speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Curve routing fence: 1639 Tapoa Extraction ports: 2 x ø 120 mm Net weight approx. 800 kg The machine can be viewed at our location in Chemnitz by appointment.

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Automatic spindle height and tilt adjustment with decimal increments - Mechanical display for spindle height and electronic display for spindle tilt - Tilting hood with aluminum guides - Adjustable table opening via table slides - System for quick tool change - With long tables featuring extendable workpiece support - Table size: 2500 x 780 mm Nedpfx Aew I H Rqjdujdd - Spindle adjustment: -45° to +45° - Spindle diameter: 30 mm - Spindle stroke: 230 mm - Maximum table opening: 300 mm - Motor: 5.5 kW with automatic star-delta start - With forward/reverse rotation - Speeds: 3000/4500/6000/8000/10000 rpm - Electronic programming of spindle height, spindle tilt, and fence position (milling fence) - Extraction ports above and below 120 mm Dimensions: 2570 x 1450 mm Weight: approx. 670 kg Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: as new, machine is unused Equipment and technical specifications: - Spindle speeds: 3,500 / 6,000 / 8,000 / 10,000 rpm - Milling spindle tilt: 0 to -45° - Usable spindle length: 125 mm Ndedpfx Adjw E Tzreujd - Spindle arbor diameter: 30 mm - Speed display: LED indicator on the machine front - Max. tool diameter (standard): 240 mm - Max. lowerable tool diameter: 230 mm - Max. tool diameter for profile milling: 240 mm - Max. tool diameter for tenoning: 320 mm - Working table length: 1,200 mm - Working table width: 530 mm - Table height: 900 mm - Sliding table length: 1,200 mm - Sliding table width: 360 mm - Sliding table height: 142 mm - Extraction port diameter: 2 × 120 mm - Main drive motor power: 5.0 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Dimensions: 1,200 × 2,000 mm Weight: 510 kg Availability: short-term Location: Saxony-Anhalt

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Machine will be completely overhauled Equipment and technical data: Table size: 1100 x 880 mm Pole-changeable drive motor: 5/6 kW Spindle speeds: 3000/4500/6000/9000 rpm Manual height adjustment: via handwheel Manual tilt adjustment: via handwheel Height adjustment of milling spindle: 110 mm Tilt adjustment of milling spindle: -5° to 45°; double-sided bearing Reversing switch for clockwise and counterclockwise rotation With 3-roller power feed unit Ndsdpfx Aewka Sbjdusd Images show the machine in non-overhauled condition. Sale does not include Aigner table extensions visible in the images. Availability: by arrangement Location: Flörsheim

Condition: new, Year of construction: 2022, I sell the FELDER HAMMER F3 bottom milling machine. Year 2022. The machine is practically new. Main spindle motor 4KW Spindle tilting 0-45° Optional spindle locking system using imbus key from above. 4 speed settings, variable on the pulley 3000-6000-8000-10,000 rpm. The milling cutter set in the picture is included in the price. Fully working. Including full documentation. Available immediately. Nodpewg Ec Dofx Aduedd

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x900x1370 mm Ndedpfxjv A Hire Adusd Weight 530 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1240x710x1200 mm Ndodpfxjv A Hils Adusd Weight 225 kg Total power requirement 2,8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x900x1370 mm Ndodpjv A Hifefx Adusd Weight 530 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1750x1300x1150 mm Weight 600 kg Ndjdpfx Adsv A Hh Ueujd Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x900x1370 mm Weight 530 kg Nodpfov A Hh Iex Aduodd Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Nodpev A Hhzsfx Aduedd Weight 190 kg Total power requirement 2,8 kw

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available - Ndjdpsr Ig H Tefx Adusd

Condition: excellent (used), Year of construction: 2001, Kity 629 rotary tiller Njdpfxor Id S Es Aduedd Motor 2,2 KW/400 Volt Table size approx. 580x715 mm Finely adjustable milling fence spindle swivel + 30° to - 5° Right/left rotation of the milling spindle Speeds 4800/6400/8700 rpm Spindle stroke 130 mm Tool up to Ø 180 mm Suction connection 2 x 100 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Woodworking machinesTable routers Minimax twf55 es Item number: 5502261 Sturdy cast steel construction Anodized aluminum sliding carriage Large dimensioned milling unit made of grey cast iron, swivels up to -45° to the rear Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Height and inclination display accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress relieved and re-annealed for lasting precision Powerful 5.0 kW industrial motor Curved milling hood included in delivery Made in Italy Dimensions and weights Length (product) approx. 1200mm width/depth (product) approx. 2000mm Weight (net) approx. 510kg Connection suction suction connection diameter 2 x 120mm Work table working table length 1200mm working table width 530mm table height 900mm sliding carriage length 1200mm Slide width 360mm Slide height 142mm Installation information Required space length 2800mm Space requirement width/depth 2910mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Machine body length 1200mm Machine body width/depth 846mm Working area length 1600mm Working area width/depth 2300mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 to -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ Milling spindle speed indicator LED on the front of the machine spindle arbor diameter 30mm Milling tool diameter max. Tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 240mm Tool diameter max. tenon milling 320mm Nsdpfx Adsi Dphteusdd EQUIPMENT Equipment Aluminum sliding carriage ✔ Milling fence Heavy-duty professional version with hold-down device, protective cover and aluminum milling fence jaws Telescopic miter fence with two folding stops Cantilever table ✔ Curved milling protective hood ✔ Eccentric clamp ✔ Handle on sliding carriage ✔ Height adjustment of the spindle manually Tilt adjustment of the spindle manual Control manual height and tilt adjustment of the milling unit Position of the control elements on the machine body location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Sturdy cast iron steel construction Large dimensioned milling unit made of cast iron, swivels up to -45° backwards Indication of the milling speeds by LEDs Fast, trouble-free speed change via eccentric voltage Right-left rotation Display of height and inclination 1/10 mm accurate Milling fence in heavy professional design: with fine adjustment via toothed rack, with numerical display, aluminum stop jaws, 3-fold positionable for fast repetition of the adjustment TECHNICAL DATA Suction connection suction port diameter 2 x 120mm working table working table length 2500mm Njdjiidnfepfx Adusdd Working table width 655mm Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 - -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ spindle mandrel diameter 30mm Milling tool diameter max. tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 210 - 240mm tool diameter max. tenon milling 320mm SUPPLY Aluminum milling stop jaws Arch milling protection hood Motorized height adjustable and swiveling milling spindle Digital display of the set values Speed display on the machine front via LED Table extension left and right Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Table milling machine minimax twf 55 es M 3 UP Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Brand Holzkraft / SCM EQUIPMENT Equipment Aluminum sliding carriage ✔ Handle at sliding carriage ✔ Njdpfx Adshp Rc Iouodd FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width [...]

Condition: new, Year of construction: 2025, Table milling machine minimax tw 45c With aluminum sliding carriage and swiveling milling spindle - high performance for a low investment Item number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and weights weight (net) ca. 290kg Connection suction suction connection diameter 2 x 120mm Working table Working table length 1000mm Sliding carriage length 1000mm working table width 435mm sliding carriage width 270mm table height 900mm Installation information Space requirement length 1945mm machine body width/depth 710mm Space requirement width/depth 2220mm Working area length 1600mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Working area Width/depth 1600mm Machine body Length 1000mm Explanation Working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Power drive motor 5,0kW Mains frequency 50Hz Milling spindle Spindle inclination 0 to -45° Spindle speed(s) 3500/7000/10000min¯¹ Useful length of spindle 100mm Spindle mandrel diameter 30mm spindle protrusion max. over table 130mm Milling tool diameter max. Tool diameter max. lowerable 180mm Tool diameter max. tenon milling 275mm tool diameter max. profile milling 210mm SUPPLY Nodpfxjhp Rcye Aduedd Arch milling protection hood Anodized aluminum sliding carriage Telescopic miter fence Aluminum stop jaws

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm table height 870 mm milling spindle not interchangeable 30 mm clamping height 140 mm height adjustment 140 mm suction socket 2 x ø 120 mm speed 3000 / 4500 / 6000 / 9000 rpm Colour RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Solid German machine construction Table milling machine with double-sided swivelling fixed milling spindle for swivelling range from -5° to +45.5 Operation via handwheel at the bottom of the machine stand Height and swivel adjustment via handwheels Analogue dial gauges for height and swivel adjustment 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick tensioning device Electronic speed display Push button for spindle start and stop Ndsdpfx Aegz Sifedujd Left and right rotation Cutter quick clamping device Finely planed cast iron table Operation easily visible and accessible at the bottom of the machine body Milling stop 215 total adjustment via handwheel incl. multiplex stop plates Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa CE tested GS tested