Bioenergie-Bayern GmbH & Co.KG

Condition: ready for operation (used), Dosing Belt Conveyor Kleemann with Hopper Cjdpfx Ahoynw Hcj Ijgp Brand: Kleemann A-A  length = 6000 mm, Beltwidth: 800 mm. Driving : 4 kW e-motor with gearbox. Dim. Hopper: 4000 X 1800 X 900 mm.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Westeria Underfloor Chain Belt Conveyor Manufacturer: Westeria Year of manufacture: 2008 Motor: 5.5 kW Feed section length: approx. 7385 mm Incline section length: approx. 8400 mm Gooseneck: 1100 mm Cjdpfeynhh Rox Ah Iegp Usable width: 1200 mm Incline: 28° Note: The conveyor belt was dismantled from ongoing operation.

Condition: ready for operation (used), Steel Apron Conveyor with Hopper Svedala Brand: Svedala Dim. steel apron conveyor: A-A length 4200 mm, Beltwidth: 1300 mm. Driving: E-motor 11 kW. Dim. hopper: length 4700 mm – width 3600 mm – height 1900 mm. Cedsymtumjpfx Ah Isgp Incl.: support chassis and discharge conveyor.

Condition: new, Year of construction: 2026, Aluminum incline conveyor with substructure including leveling feet and machine feet for compensating uneven floors - Feed height: 500 mm - Inclined section: 2,000 mm - Discharge height: 1,200 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Continuous removal plate 2.0 mm galvanized Drive roller + return roller made from S235 steel, welded and machined Ø150x620 mm crowned, shaft fixed with pillow block bearings. Drive: Mounted gear motor 1.10 kW, belt speed 0.77 m/sec Csdpfsyhzhbsx Ah Iogp Connection 230/400V, 50Hz, protection class IP54 Drive pre-wired up to the motor terminal box (Commissioning must be carried out by qualified electrical personnel) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm endless high-frequency welded with stepped joint Belt material: 2-ply, especially cross-stable 2 pcs wave edge profiles, 80 mm high, 50 mm wide, high-frequency welded flush with the belt edge 14 pcs T60 cleats, 400 mm long, pitch approx. 296 mm, center-mounted Belt material: 2-ply, especially cross-stable Due to the wave profiles on both sides, the usable belt width is reduced: Usable width 500 mm, calculated as follows: (Top view) Crosswise arrangement 50+500+50 mm

Condition: ready for operation (used), Eddy Current Separator Brand : Bakker Magnetics *Magnetdrum : length 1750 X 320mm Cjdpfxox Numwo Ah Isgp Driving: 11 kW E-motor. *Belt conveyor: A-A  length 3400 mm Belt width: 1600 mm Driving: 3 kW Gearbox.

Condition: ready for operation (used), Pickingbelt DOUBRAVA AUSTRIA CC length = 6000 mm Beltwidth = 1200 mm Cjdpfxex Num Do Ah Iegp Driving: gear unit 3 kW

Condition: refurbished (used), functionality: fully functional, Trough Conveyor Belt | Trough Belt Conveyor | Conveyor Belt Factory-refurbished and inspected (used) with new rubber steep-incline conveyor belt and new carrying rollers Lightweight frame construction made of steel Cgsdpfx Aoxz Tg Djh Isp Belt width: 500 mm Axle distance (A-A): 10,000 mm Conveying capacity: approx. 30–40 m³/h (at 0° incline) Drive: Drum motor, used Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tension drum: Drum diameter 160 mm with spindle tensioning station Belt: Rubber steep-incline conveyor belt EP 250/2 2:1 with V-profile (15 mm) Machine weight: approx. 800 kg Machine color: freshly repainted Incl. infeed hopper (charging hopper) Suitable for, amongst others, the following bulk materials: Wood chips, sawdust and wood shavings, biomass, wood pellets, charcoal, waste wood, bark, earth, compost, recycling material, trimmings, and much more. Accessories (optional): Internal belt scraper, chassis, tow bar, steel support, electrical installation (plug switch 16 A) Trough Conveyor Belt | Trough Belt Conveyor | Conveyor Belt | Bulk Material Conveyor | Belt Conveyor | Inclined Belt Conveyor

Condition: new, Year of construction: 2020, functionality: fully functional, conveyor belt length: 17,000 mm, conveyor belt width: 1,500 mm, total length: 18,000 mm, total width: 2,300 mm, total height: 6,000 mm, discharge height: 4,500 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, Cometel C-1500-CH (P = 10”) Short summary The Cometel C-1500-CH (P = 10") is a heavy-duty chain conveyor engineered for high-volume removal of stamping scrap and industrial recycling materials. Designed for continuous service in demanding environments, the C-1500-CH features a robust chain-and-flight conveyor design with modular components and simple maintenance, making it suitable for metal stamping facilities, recycling centers, or any application requiring fast and reliable evacuation of substantial quantities of chips, slugs, and scrap. Cgedpfxoxywfhj Ah Isp Key features - Heavy-duty chain & flight system: 10” pitch chain (P = 10") fitted with welded steel flights, sized to transport irregular, sharp, and high-density scrap materials without jamming. - Rugged construction: Structural steel chassis with wear-resistant liners in the trough and impact zones; available upgrades include stainless steel or Hardox wear plates for handling abrasive or corrosive materials. - Modular and configurable: Standardized modules for various lengths, widths, and flight heights allow adaptation to different machine lines, presses, or scrap bunkers. - High throughput capability: Engineered for continuous, high-capacity operation—ideal for bulk scrap flows found in metal stamping and recycling applications (capacity varies with material density, width, and flight dimensions). - Powerful drive & gearbox: Industrial gearmotor with torque reserve for peak loads; available soft-start function reduces mechanical stress during start-up. - Simple installation & integration: Flanged connections and precision alignment features enable rapid installation to presses, hoppers, balers, or downstream systems. - Maintenance-friendly: Quick-access inspection covers, greaseable chain pins, and replaceable wear strips minimize downtime and service requirements. - Safety & compliance: Fitted with safety guards, emergency stop cables, and optional safety interlocks to meet industrial safety standards; custom guarding available for robot or press interfaces. Typical materials handled - Stamping scrap (slugs, burrs, strips) - Sheet metal offcuts and coil edge trim - Heavier machining chips and fragmented scrap (with optional coolant drainage) - Mixed metal recycling streams (ferrous and non-ferrous)

Condition: ready for operation (used), Belt Conveyor SBM Austria Brand: SBM Austria 7 pieces on stock: Cedpfsxymdgex Ah Ijgp *nr1= A-A  length: 13.100 mm, Beltwidth: 650 mm, Driving: gearmotor 4 kW. *nr2= A-A  length: 9.200 mm, Beltwidth: 650 mm, Driving: gearmotor 4 kW. *nr3= A-A  length: 7.500 mm, Beltwidth: 1000 mm, Driving: gearmotor 5,5 kW. *nr4= A-A  length: 21.000 mm, Beltwidth: 1000 mm, Driving: gearmotor 7,5 kW. *nr5= A-A  length: 12.600 mm, Beltwidth: 800 mm, Driving: gearmotor 5,5 kW *nr6= A-A  length: 12.600 mm, Beltwidth: 800 mm, Driving: gearmotor 5,5 kW *nr7= A-A  length: 18.000 mm, Beltwidth: 800 mm, Driving: gearbox 7,5 kW

Condition: ready for operation (used), Belt Conveyor LKOREMAN Brand: LKOREMAN Beltwidth: 500 mm *A-A length = 6000 mm Power : Gearbox 2 kW Cgjdpfjxnnctjx Ah Ijp In stock: 1 piece *A-A length = 10000 mm Power : Drum motor 1,1 k In stock: 1 piece

Condition: ready for operation (used), Belt Conveyor Brand: LKOREMAN A-A  length = 7000 mm Beltwidth: 2000 mm Drive-Return Drum Ø 520 mm. Power : Stiebel Gearbox 18,5 kW Speed appr. 1,3 m/sec. Cgodpfoxnncyex Ah Iop

Condition: ready for operation (used), Belt Conveyor Metso Brand: Metso 2 piece on Stock: *1x A-A  length = 11.500 mm, Beltwidth: 1300 mm, Flat Version. Cedpfoxnnc Hex Ah Iegp Driving: 7,5 kW gearbox. *1x A-A  length = 20.000 mm, Beltwidth: 650 mm. Driving: 7,5 kW gearbox.

Condition: ready for operation (used), Lot of Belt Conveyors, consisting of Nr1= Brand: LKOREMAN, year of manufacture 2010 A-A  length: 1000 mm, Beltwidth: 1000 mm Power : 0,2 kW Drum motor , Beltspeed: 0,4 m/s. Nr2= Brand: LKOREMAN, year of manufacture 2001 Curve conveyor 20°, Beltwidth: 700 mm Csdpfx Ajxnndweh Iogp Power : 0,37 kW gearbox , Beltspeed: 0,2 m/s.

Condition: ready for operation (used), Belt Conveyor Ammann Brand: Ammann *1x: A-A  length = 12.500 mm, Beltwidth: 650 mm Driving : drum motor 5,5 kW. *1x: A-A  length = 43.000 mm, Beltwidth: 650 mm Cgedpfxexlvfqe Ah Iep Driving : gearbox 15 kW.

Condition: ready for operation (used), Dosing Belt Conveyor Ammann Brand: Ammann Cgjdpfxoxla Sbo Ah Iop *A-A  length = 5000 mm. Beltwidth: 800 mm. Driving: 3 kW Gearbox On stock: 1 piece. *A-A  length = 3000 mm. Beltwidth: 650 mm. Driving: 2,2 kW Gearbox On stock: 1 piece.

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/8 Belt width: 500 mm Centre distance (A-A): 8,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: Drum Motor Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 800 kg Machine colour: RAL 6011 reseda green Suitable for the following bulk materials, among others: Potatoes, Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Cgjdjxk Tg Nopfx Ah Ijp Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: ready for operation (used), Belt Conveyor Hazemag Brand: Hazemag 7 pieces on stock: *  A-A  length: 5.000 mm, Beltwidth:  600 mm, Driving: 3 kW. *  A-A  length: 3.000 mm, Beltwidth:  800 mm, Driving: 3 kW. *  A-A  length: 5.000 mm, Beltwidth: 1000 mm, Driving: 7,5 kW. Cjdpfxoxfd A Rs Ah Iegp *  A-A  length: 2.300 mm, Beltwidth:  700 mm, Driving: 3 kW. *  A-A  length: 5.800 mm, Beltwidth:  800 mm, Driving: 3 kW. *  A-A  length: 3.500 mm, Beltwidth:  650 mm, Driving: 5,5 kW. *  A-A  length: 5.000 mm, Beltwidth: 1000 mm, Driving: 5,5 kW.

Condition: ready for operation (used), Belt Conveyor Hazemag Brand: Hazemag 5 pieces on stock: Cgsdpfxjxdvwwj Ah Iep *3x  A-A  length: 12.000 mm, Beltwidth:  650 mm, Driving: 5,5 kW e-motor. *1x  A-A  length:   9.000 mm, Beltwidth:  650 mm, Driving: 5,5 kW e-motor. *1x  A-A  length: 13.000 mm, Beltwidth: 1000 mm, Driving: 7,5 kW e-motor.

Condition: ready for operation (used), Belt Conveyor Brand: Kleemann A-A  length = 9.000 mm, Beltwidth: 650 mm Speed: 1,3 m/sec. Driving : 7,5 kW motor with Gearbox. Cgodpew Sbwtefx Ah Ijp

Condition: ready for operation (used), Belt Conveyor Kleemann Brand: Kleemann. 3 pieces on Stock: *1x A-A length = 10.000 mm. Beltwidth: 800 mm. Driving: 7,5 kW Gearbox. *2x A-A length = 10.000 mm. Beltwidth: 1000 mm. Driving: 7,5 kW Gearbox. Cgsdpfx Asw Rifvjh Iep

Condition: ready for operation (used), Belt Conveyor Kleemann Brand: Kleemann. 2 pieces on Stock: *1x A-A length = 9000 mm. Beltwidth: 800 mm. Driving: 5,5 kW Gearbox. *1x A-A length = 6500 mm. Beltwidth: 1200 mm. Cedpfx Ahow Nu Uyo Iogp Driving: 5,5 kW Gearbox.

Condition: ready for operation (used), Steel Apron Conveyor with Hopper ABM / Bergeaud Brand: ABM / Bergeaud Dim. Steel Apron Conveyor: A-A length 10.000 mm, Beltwidth: 860 mm Cgedpfsw Iyzcox Ah Iep Driving: E-motor 7,5 kW Dim. Hopper: Length 3000 mm – width 2400 mm. Height = 1100 mm leading to 900 mm. Weight appr. 19 Tons.

Condition: ready for operation (used), Belt Conveyor Kleemann Brand: Kleemann 2 pieces on Stock: *A-A length = 11000 mm. Beltwidth: 1400 mm. Driving: 15 kW Gearbox. *A-A length = 10000 mm. Cgsdpfew Ialnox Ah Isp Beltwidth: 1200 mm. Driving: 7,5 kW Gearbox.

Condition: ready for operation (used), Belt Conveyor KLeemann Brand: KLeemann A-A length = 2100 mm Beltwidth: 1400 mm. Csdjw H Exxopfx Ah Iegp Driving : 7,5 kW gear unit

Condition: ready for operation (used), Belt Conveyor KLeemann Brand: KLeemann A-A length = 7500 mm Beltwidth: 650 mm. Driving : 7,5 kW gear unit Cgedsw H Exrjpfx Ah Ijp 2 pieces on Stock