Theodor Peters e.K.

Condition: good (used), Code: 0680 Brand: BIESSE Model: AKRON 430/AT - CE Standard Automatic edge bander with grinding unit for edgebanding solid wood, chipboard, veneer, Pvc, Abs and melamine panels - CE Standard - Year 2009 Technical data: Hsdpfexn Nwrsx Afpefn Panel height mm 10/60 Edge thickness max mm 10 Panel length min mm 140 Panel width min mm 85 Belt feed speed 12 mt/min Electronic control panel with USB port for data loading - Sintra software Grinding unit for panel grinding -N° 2 motors each Hp 2,4 rpm 12000 Tools diameter mm 80 F30 H75 Slide copying devices N° 2 suction nozzles diameter mm 60 Gluing unit Interchangeable glue pot Glue pot capacity kg 2 Glue spreader roller diameter mm 25 Pressure roller conveyor large roller diameter 100 mm Pressure roller conveyor small rollers diameter mm 80 End cutting unit: for cutting excess front and rear edges N° 2 motors each Hp 1,07 12000 rpm Motor inclination 0-15 degrees Max tooling mm 140 Slide copying devices N° 2 suction nozzles diameter mm 80 Finishing trimming unit for chamfering the excess edge in the top and bottom corners of the panel N° 2 motors each 0,87 Hp 12000 rpm Motor inclination from 0 to 25 degrees Tool diameter 70 mm F16 height 20 mm Vertical and frontal copying devices with rotating discs Height adjustment: automatic with the upper pressure unit N° 2 suction nozzles diameter mm 80 Edge scraper unit for edge finishing in Abs Radial plate tool Vertical and frontal copyng devices with rotating discs N° 2 suction nozzles diameter mm 60 Glue scraper unit for removing glue residues Vertical copying devices with rotating discs N° 2 suction nozzles diameter mm 60 Removable support for panel support N° 5 suction nozzles diameter 100 mm Compressed air bar 7 Overall dimensions mm 3900 x 1000 x 1600 h Weight kg 1530

Condition: excellent (used), Year of construction: 2024, operating hours: 650 h, Edge Banding Machine with PLC control system (incl. 15“ touch screen) and glue application to the workpiece for edge band material up to 3 mm: pre-milling (DIA-tools incl.) up to max. 3 mm milling depth, maintenance-free and coated quick heating pot with preliminary setup for change over quick heating pot (incl. hot-melt glue changing device), HF-trim saw station (approx. 12,000 rpm),HF-milling station (approx. 12,000 rpm) with pneum. milling adjustment, 2nd HF-milling station (approx. 12,000 rpm, incl. pneum. disengagement), corner rounding unit1), radius profile scraper, surface scraper (incl. pneum. disengagement), cleaning station, groove saw (incl. pneum. disengagement), robust chain drive, double roller top pressure (ball bearing supported), windows for aggregates from machine back side and operator side, indicating lamp for workpiece sequence, extensible support bar to the front, band feed approx. 15 m/min, gluing up to 60 mm workpiece thickness. Optional things installed on the machine Quick change device for corner rounding Multi-Radiusscraper (R2/R1) Hsdsxn Nvbopfx Afpjfn Heatable infeed fence Wheels Release agent spraying unit (spraying workpiece) Cleaning agent spraying unit (spraying workpiece) Protection spraying edge Nesting Pneumatic 3-point adjustment Multiool for HF-milling station Airtronic (up tp 40 mm workpiece thickness) Axis package (motor driven adjustments of height, edge and premilling) Glue pot suction hood The machine is on stock!

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 18 kW (24.47 HP), I am listing this machine on behalf of a client. Hodpjxn Nuwjfx Afpsfn The machine is immediately ready for use. Solid wood edges up to 60 mm edge width and 20 mm edge thickness can be edgebanded with this machine. The edgebander can still be inspected under power.

Condition: used, machine/vehicle number: 008162, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Hfsdpfx Ajxn Nfpjfpen Max feed speed: 15 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 020313L, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Hodsxn Hzbopfx Afpsfn Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 3658, power: 9.5 kW (12.92 HP), input current: 400 A, input frequency: 50 Hz, The machine on offer comes from a hobby workshop and is in exceptionally good condition for its age. Hedpfx Afjxnz E Iepjfn

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Brand: SCM Model: OLIMPIC K 500 T/ER-2 - CE Automatic edge banding machine with edge sanding unit for processing edges made of wood, veneer, PVC, melamine, ABS – suitable for furniture manufacturing, joinery, custom fittings, panels, kitchen and bathroom furniture, and various other products. Technical data: Min./max. panel height: 8–60 mm Panel height with rounding unit: 10–45 mm Hfodpfx Afjxnvr Aspen Edge thickness: 0.4–8 mm Edge thickness in roll: 0.4–3 mm Minimum panel width: 55 mm Feed speed: 11 m/min Pressure beam with motorized vertical adjustment Panel support arm Sound-insulated safety cabin Fluid inlets Configuration: Anti-adhesive application unit with two nozzles – two separate tanks for anti-adhesive fluid Pre-milling unit with two high-frequency motors – diamond tools H64 mm – diameter 100 mm, F 30, h 65 – copying kit included VC 560 gluing unit for applying edging to panels up to 60 mm – glue pot capacity: 1.5 kg – interchangeable glue pot End cutting unit with two independent motors, each 0.35 kW at 12,000 rpm – motor tilt from 0° to 15° – 2 saw blades, 115 mm diameter – face copiers Tilting trimming/bevelling unit for trimming excess edging top and bottom – 2 motors of 0.55 kW each – 12,000 rpm – tilt from 0° to 25° – 2-position pneumatic quick-change kit for processing thin or radius edges Corner rounding unit with two motors on precision guides – enables rounding and trimming of thin and thick edges – 2 motors of 0.55 kW each – 12,000 rpm Edge scraping unit for optimal finishing of ABS/PVC edging with rotating tracing guides, extraction hood, and trimming waste cassette Glue scraping unit – removes glue residue from the lower and upper panel surfaces Brushing unit for cleaning and polishing plastic edges – motor 0.25 kW – brush diameter 150 mm Compressed air: 7 bar Overall dimensions: 5500 x 1150 x 1550 (H) mm Weight: 1,780 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, The HOMAG Optimat KAL 210/6/A20/S2 is a single-sided automatic edge banding and finishing machine designed for maximum precision and efficiency in panel processing. It is ideal for industrial applications and professional carpentry workshops. The machine enables joint trimming of straight workpiece edges as well as gluing and subsequent processing of a wide range of edge materials (both rolls and strips) up to 20 mm edge thickness, suitable for both longitudinal and transverse passage. Technical Data Feed speed: 18 – 25 m/min Working height: 950 mm Workpiece thickness: 12 – 40 mm Edge material (roll): 0.3 – 3 mm Edge material (strips): up to 20 mm Pneumatic connection: 7–8 bar Operating voltage: 400 V, 50/60 Hz Equipment Power Control PC22 control system (Windows-based) Separating agent spraying device, top/bottom Joint trimming unit with 2 motors, each 3 kW A20 gluing unit for roll and strip material Pressure zone with 1 powered pre-pressing roller, 6 subsequent pressure rollers HL84 end trimming unit Pre-milling unit, 1.5 kW Hfjdpfx Ajxnpx Aefpon FK11 contour trimming unit Profile PN10 finishing unit & final trimming unit Automation package for chamfer/radius with pneumatic adjustment Noise protection enclosure and individual dust extraction Control & Software Menu-driven operation via 17" TFT display woodCommander software package for program management Network connectivity and remote maintenance capability Special Features CE-compliant according to the EC Machinery Directive High-quality design, robust construction

Condition: used, Holz Her Accura 1556 Premium Heavy-duty design with full equipment Edge thickness 0.4 – 20 mm 18.5" touch screen control panel, 16:9 format, rotatable and tiltable Synchronized belt bridge with motorized, position-controlled height adjustment Long motorized adjustable infeed fence Pre-milling unit for material preparation before the gluing station, with 2 NC servo axes Syncro edge magazine, fully automatic for roll and strip material MOT3, with 2 motorized pressure rollers GLU-JET automatic gluing station. Cartridge + PU bonding. Thin film technology Glue height adjustment / sensor nozzle Max. edge height 60 mm Pressure section with 4 rollers, motor-pneumatic. NC servo axis End trimming unit for roll and strip material up to 20 mm edge thickness, with electro-pneumatic adjustment for 0-10° saw angle tilt Flush milling unit 20 mm MOT3, motorized horizontal adjustment Multifunction milling unit MOT6 with multifunctional milling technology Flush milling 8 mm Radius milling: R1, 3; R2 (2x) Bevel milling up to 45° Copy milling unit MOT4, with automatic tool changer MOT2 and oscillating sensor, for corner copying, postforming corners, with 4 NC controlled axes, for milling the upper and lower longitudinal edge and copy milling the front and rear vertical edges. Working height 60 mm. R1, 3; R2 (2x); 45° bevel Scraper unit MOT8 incl. high-gloss package and fully automatic tool changer, R1; R1.3; R2 (2x); 45° bevel Nesting package Flat scraper unit with pre- and post-sensing Hfedpfjxnmu Isx Afpjn On-demand oscillating buffing unit for post-cleaning and edge polishing with 2 textile discs Spraying system in the infeed and outfeed area, as well as antistatic solution at the pressure section Infeed area electronically controlled release agent spraying unit Pressure section electronically controlled antistatic spraying device Outfeed area electronically controlled cleaning solution spraying unit with cleaning agent Automatic chain lubrication Barcode scanner The machine is FACTORY SERVICED and in TOP CONDITION Year of manufacture: 2021 / Leasing option Machine is connected in the demonstration center and ready for demonstration Available from stock Lieboch

Condition: used, Year of construction: 2006, Homag Optimat KAL310/6/A3/S2 Edgebanding Machine, 6-Position Tape Cart, Quickmelt Glueing Unit QA3, Approx 1100mm Wide Machine Roller Width Conveyor, Tilting Outfeed Conveyor to Return Belt Conveyor, Windows Based Control. Serial No. 0-200-15-4533 (2006). Country of Origin: Germany Hsdpfexnliksx Afpefn A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Please Note: These lots are located in Birmingham, UK

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Hsdpfx Afexnlbyepefn

Condition: used, Year of construction: 2007, Jointing cutter 1. Milling station R=2.5 Combination unit Corner rounding cutter R=2 Surface scraper Profile scraper Pneumatic milling adjustment (Straight / Radius) PLC control with Pro-face touchscreen Swappable tank Prepared for special feature: maximum workpiece thickness 60 mm (without jointing) Storage location: Supplier Hfedoxnlacjpfx Afpen

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Diamond cutter and glue roller newly installed. This FELDER MG580 edgebander was manufactured in 2010. Ideal for precise edge banding applications, it represents a reliable choice for enhancing your woodworking operations. Contact us for more information. Hedpfxexnd Ilj Afpofn Application Types Edge Banding

Condition: like new (used), Year of construction: 2019, I sell the edge banding machine Biesse JADE 240 Year 2019. Special offer: Machine almost NEW !! Configuration: Entry fence manual adjustable Premilling pneumatic adjustable Edge banding manual adjustable / 2 glue tanks for EVA glue Pressure zone manual adjustable End cutting saw pneumatic adjustable Tilting radius milling manual adjustable Corner rounding unit 2-motor manual adjustable Radius scrapers manual adjustable Glue scrapers pneumatic adjustable Polishing brushes Hfodpfxoxncrvj Afpon Separation fluid spraying front Central lubrication system Top feeding rolls Height adjustment manual Material height 10-60 mm Edge thickness 0,4-8,0 mm Feeding speed 12 m/min. Only 9250 meters edgebanded. Machine almost NEW !! CE Mark. Including full documentation and CDs. Very good condition ! Available immediately !

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine HOMAG KAL370 AMBITION 2474, year 2015: Configuration: Entry fence servomotorical adjustable Premilling manual adjustable Edge banding with preheating tank + AirTec System Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 4-motor pneumatic adjustable Radius R2 scrapers servomotorical adjustable / Second set for R1 included Glue scrapers servomotorical adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Entry magazine for two bands in rolls automatic Working thickness adjustment servomotorical driven Material height 8-60mm Edge thickness 0,4-20mm Feeding speed up to 20m/min. Total length including feeding plate 8365mm Kilometerstatus 1.166.000 Meters edgebanded. Including full documentation and CE. Hfjdsxnb Uvjpfx Afpon Very good condition, fully working!

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine HOMAG KAL370 AMBITION 2280, year 2015: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 4-motor manual adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Glue scrapers manual adjustable Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment manual driven Hjdpoxnbx Iofx Afpsfn Material height 8-60mm Edge thickness 0,4-20mm Feeding speed up to 20m/min. Total length including feeding plate 9365mm Kilometerstatus 2.926.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: used, Holz Her Triathlon 1488 FÜ + PU Heavy-duty design – edge thickness 0.4 – 25 mm SPS screen control Edge-Control Motorized, position-controlled height adjustment – belt bridge automatic feed fence Pre-milling unit for jointing before the gluing section Fully automatic edge magazine for rolls and strips Glue application station for cartridge and PU bonding Glue application using nozzle technology automatic glue height adjustment Workpiece height 6–60 mm Pressure unit MOT End trimming unit for rolls and strips up to 15 mm edge thickness, with pneumatic adjustment for 0-15° mitering of the trimming saws Milling units – flush milling for rolls and strips from 0.4 – 20 mm edge thickness Contour milling unit for longitudinal and end processing of the edges, working height 45 mm Scraper unit for bevels and radii with 2 scraper holders, pneumatically engageable/disengageable Surface scraper unit Process-controlled buffing unit Automatic central lubrication for chain Electronically controlled spray unit at infeed and outfeed Hfjdpfx Afsxm Spbspsn Machine is FULLY FUNCTIONAL The machine is in use and can be inspected and demonstrated at any time at the seller’s location Sale on behalf of a customer Ex site as inspected, without any warranty, NET €9,000.00

Condition: good (used), Code: 0222 Brand: FRAVOL Hfsdpfjxmg N Njx Afpsn Model: A 16-S - CE Standard Edge bander with trimmer for curved and straight panels, with glue tank for wood, pvc, abs, veneer edges, for furniture, kitchens, panels, carpentry, custom-made furniture - CE Standard Technical data: Min-max panel height mm 10-60 Edge thickness mm 0,4-3 Min edging radius mm 20 Motorized conveyor belt Variable feed speed mt/min 25/12 Tilting table Air pressure 6 bar Overall dimensions mm 1150 x 950 x 1300 h Weight kg 300 Upper and lower trimmer unit POLYMAC BIESSE SPEEDY 90 2 high-frequency motors adjustable in height Trimming height mm 12-60 Operating pressure bar 6 Suction mouth diameter mm 60 Overall dimensions mm 1000 x 950 x 1300 h Weight kg 110

Condition: refurbished (used), Year of construction: 2020, Condition: fully cleaned, refurbished, and overhauled – directly from Hebrock! 🧰 Technical Specifications & Highlights Model: Edge Bander Hebrock K36 Control: PLC with touchscreen Hotmelt glue application: for edge material up to 3 mm Workpiece thickness: up to 60 mm Jointing cutter: with DIA tool, cutting depth up to 3 mm Glue pot: coated, maintenance-free, with quick-change pre-fitting and glue draining system ⚙️ Equipment Packages & Stations HF milling station with pneumatic cutter adjustment Corner rounding unit (radius R = 2 mm) Radius scraper & flat scraper with pneumatic lift-off device Buffing station for perfect surfaces Whispercut jointer head Second milling station incl. pneumatic lift-off and quick-change system Exchangeable motor for corner rounding unit (radius R1) Multi-radius scraper (R1/R2) Multifunctional cutter (R2/R1/chamfer) 🪶 Additional Equipment Release agent and cleaning agent spraying system Protective spraying for edges / nesting function Pneumatic 3-point adjustment LED lighting Airtronic up to 40 mm Hot air unit for optical zero-joint, also for short workpieces and corner rounding up to 60 mm Hedpfx Aoxmgzljfpofn

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Single-sided edge banding machine Manufacturer: Brandt Model: KDF 660 Year of manufacture: 2005 Hfodpfx Afjxl Ufvspen Max. edge thickness: approx. 12 mm Max. workpiece thickness: 60 mm Max. coil material thickness: 3 mm Equipped with: - Pre-milling unit - Coil magazine - Glue application unit - End trimming unit - Top/bottom flush and radius milling - Top/bottom radius milling with front/rear edge copying - Radius scraper - Buffing station Feed speed max. approx. 16 m/min. Connection: 400 V, 50 Hz, 3 Ph Total connected load: approx. 15 kW

Condition: used, Lange B90 KFE Edge thickness: 0.4 - 3 / 5 mm Control panel: PLC touch panel Pre-milling unit for pre-milling before the gluing section Automatic edge magazine for roll materials Teflon-coated quick-change glue pot for hot melt adhesive granules Workpiece height: 8 - 50 mm Finely adjustable glue roller Guillotine up to 3 mm for pre-cutting roll materials Pressure unit End trimming unit Multi-function milling unit for flush, radius and chamfer milling Corner copying unit for end edges up to 2 mm, switchable from the control panel Radius scraper blade Hjdpjxl Aw Tsfx Afpjfn Flat scraper blade Buffing unit Spraying device at infeed and outfeed Year of manufacture: 2018 The machine is FUNCTIONAL and in GOOD CONDITION Ex works NET €17,000.00

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 - 3 mm (6 mm) Hfodpjxlz Nzefx Afpon Control panel with selector switches for aggregate setting Fully automatic edge magazine for both rolls and strips Glue application station: Cartridge + PU gluing Workpiece height 6-55 mm Pneumatic pressure unit End trimming unit for rolls and strips up to 3 mm (6 mm) edge thickness With adjustable mitering of trimming saws from 0-10° Milling unit for flush milling, radius milling, and chamfer milling - 15° Scraper unit for chamfers and radii Surface scraper unit - finishing Machine is TESTED and in TOP CONDITION from a very well-maintained craft shop Available ex-stock Lieboch at INVENTORY CLEARANCE FIXED NET PRICE €8,900.00

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, FELDER G330 Edge Bander Hfjdpfx Afjxly I Aspsn Used edge bander, post-service inspection. - Machine in excellent technical condition. - Year of manufacture: 2013. - One-owner machine. - Recently serviced. EQUIPMENT: Electrical equipment: - Supply voltage: 3x 400 V - Power frequency: 50 Hz Workpiece dimensions: - Edge thickness: 0.4 – 3.0 mm - Workpiece thickness: 10 – 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units: - Edge feeding from coil via feed plate - Edge feeding for thicknesses 0.4–3 mm, manual feed for individual edging strips - Guillotine shear for trimming coil edges up to 3 mm thick - Gluing unit for hot-melt granulate adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing roller - Saw trimming unit: 9,000 rpm, 0.18 kW, HW saw blades Z=16, Ø 80 mm - Multifunctional milling unit: 12,000 rpm, 0.22 kW, for rounding, straight milling, and chamfering - Mechanically-activated corner scraper unit for R=2 mm - Mechanically-activated flat scraper unit Operation: - Control panel with LCD display and keypad - Quick, tool-free unit adjustment system Feed: - Workpiece feed with chain-type conveyor - Feed speed: 8 m/min - Extendable support General data: - Extraction port Ø 120 mm Overall dimensions: - Length: 2,000 mm - Width: 800 mm - Height: 1,500 mm - Weight: 360 kg Machine financing available via leasing or installments. Just visit our website: jbsmaszyny.pl We invite you to test the machine. Where to see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE, Poland Nationwide machine transport! Phone: 663 495 647 (German) Phone: 664 335 475 (English) Phone: 530 632 386 (English)

Condition: ready for operation (used), Year of construction: 2024, Additional Equipment Application unit with Teflon coating for 1.5 kg EVA granulate Upper and lower polishing unit This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a turntable magazine with a diameter of 750 mm for edging material ranging from 0.4-3 mm, a GlueBox application unit, and upper and lower polishing units. The machine includes advanced x-motion Plus control with a 15' SmartTouch screen and a multifunctional milling unit for precise plastic edge machining. Contact us for more information about this machine. Hedpfx Asxlu Ukefpofn Application Types Edge Banding

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 3074, feed rate Y-axis: 10 m/min, total length: 4,984 mm, workpiece height (max.): 60 mm, total width: 1,425 mm, edge thickness (max.): 3 mm, total height: 1,618 mm, overall weight: 1,400 kg, type of input current: three-phase, height adjustment type: mechanical, input voltage: 400 V, extraction nozzle diameter: 140 mm, working height: 888 mm, input current: 32 A, input frequency: 50 Hz, extraction connection diameter: 140 mm, year of last overhaul: 2025, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. Hfodpfxsxlr S Ho Afpsn The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle - Gluing station - End trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle - Flat scraper - Polishing wheel Price does not include VAT.