ABM Handels GmbH

Condition: used, Control FANUC Series 18i-T turning diameter 20 mm turning length 205 mm Bodpfoyq S Efex Ah Ijwi spindle tunring speed 6.000 U/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Three machines are available. Price per unit. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prices are subject to prior sale.

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 5,500 W, spindle speed (max.): 7,000 rpm, overall weight: 2,900 kg, controller manufacturer: FANUC, controller model: 18i-TB, number of axes: 7, This 7-axis TSUGAMI BS32CE-V was manufactured in 2008. It features a maximum turning diameter of 32 mm and a turning length of 250 mm. The machine is equipped with two spindles, offering main spindle speeds of 200 – 7000 rpm and sub-spindle speeds of 200 – 6000 rpm. If you are looking to get high-quality turning capabilities, consider the TSUGAMI BS32CE-V swiss type turning machine we have for sale. Contact us for further details. • Condition: Very good; low number of hours • Power-on hours: 28,538 • Spindle hours: 9,190 • Number of spindles: 2 • Max turning diameter: 32 mm • Max turning length: 250 mm • Max drilling diameter: 12 mm • Max threading diameter: M10 • Sub-spindle speed: 200–6000 rpm • Sub-spindle motor power: 2.2 kW • C-axis: 360,000° • Spindle nose: for F37 collet • Tooling/Stations: • Number of stations: 4 • Number of tools: 20 • Number of live tools: 5 • Turning tools: 5 • Drilling tools: 6 • Cross machining tools: 4 • Live tool speed: 200–5000 rpm • Live tool power: 0.9 kW • Working feed: 1–6000 mm/min • Rapid feed: 20 m/min • Dimensions (machine, without bar feeder): 2150 × 1500 × 1800 mm Additional equipment • Bar feeder: IEMCA BOSS 332L • Chip conveyor • Parts catcher • Short part ejector Bedpfx Aheyq Nwxo Iewi • Bar puller • Work light • Set of collets • Serial port interface RS232 • 3-color status light • Documentation

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: P10243, Citizen CINCOM M12 – Swiss / Sliding Headstock automatic lathe Year of manufacture: 2000 Year of manufacture of the feeder: 2009 Technical data: • Max. bar diameter: 12 mm • Max. turning length: 200 mm • Main spindle speed: 12,000 rpm • Spindle power: 2.2 kW • Counter spindle speed: up to 10,000 rpm • Number of axes: 7 (C-axis on both spindles) • Machine weight: 2,580 kg • Control: CNC Cincom / Mitsubishi M6 • C-axis and driven tools – milling, drilling, threading possible Equipment: • LNS Express 332 bar feeder (2009) • Guide bushings • Live tools • Set of fixed holders • No chip ejector The set also includes a large set of guide bushings (GB) and bushings for the LNS feeder in various diameters – visible in the photos. The photos show the complete set of tools for two identical machines that we sell. • when purchasing both machines – we provide the entire set of bushings • when purchasing one machine – the tooling will be divided between the machines Tool list: Gang tool post: T1-T5 fixed tools T6-T8 driven tools (holders included) Turret: T20-T29 fixed or live tools, possibility to install more than one tool per station. Backspindle tool post: T41-T43 fixed tools, no possibility of installing driven holders Bjdoyqvx Aepfx Ah Ijwi Technical condition: The machine is in very good condition, after technical inspection, ready for immediate operation. Application: Precision automatic lathe for serial production of small turned parts from Ø 1–12 mm bar stock. Additional information: • Nameplate: Citizen Watch Co., Ltd., type M-12, no. M212/0257, weight 2580 kg, S/N P10243. • Full documentation available and possibility of voltage testing. • Transport and loading at the buyer's request.

Condition: used, Year of construction: 2001, machine/vehicle number: IntNr230983, CNC sliding headstock lathe Citizen L520, year 2001 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazine Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! CNC sliding headstock lathe Citizen L520, year 2001 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazine Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] Bjdpfx Ajyn Nthjh Iowi The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,300 h, functionality: fully functional, spindle speed (max.): 6,400 rpm, bar diameter (max.): 32 mm, controller model: TX 8 i-p, workpiece length (max.): 245 mm, TECHNICAL DETAILS Main Spindle Max. bar capacity: 32 mm Max. workpiece length (swiss turning): 245 mm Max. workpiece length (short turning): 125 mm Max. spindle speed: 6,400 rpm Sub Spindle Max. bar capacity: 32 mm Max. clamping length for workpiece: 250 mm Max. spindle speed: 6,000 rpm Upper Turret Number of stations: 10 All driven Max. speed: 12,000 rpm Bsdpfx Aeyn Imysh Ijwi Lower Turret Number of stations: 9 All driven Max. speed: 12,000 rpm Backworking Unit Number of stations: 8 Driven stations: 3 (T12, T13, and T14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm MACHINE DETAILS Spindle hours: 8,300 hours Control system: TX 8 i-p EQUIPMENT Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist separator Bar feeder FMB turbo 3-36

Condition: used, CITIZEN CINCOM M 32 is a CNC automatic lathe / CNC Swiss type lathe delivering high precision, excellent accuracy and reliability. Working capacities: max. turning diameter 32 mm, maximum turning length 600 mm. Key technical specifications: rapid traverse 25 m/min; voltage 50 Hz 3x 400 V; machine weight about 3200 kg; overall dimensions LxWxH: 2800 x 1370 x 1790 mm. It achieves tight tolerances and is suitable for applications in watchmaking, medical, automotive, aerospace and machine tool industries Bjdpfx Asyn Eifsh Iewi

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, spindle motor power: 2,200 W, turning length: 135 mm, spindle speed (max.): 8,000 rpm, turning diameter: 12 mm, overall weight: 1,400 kg, rotational speed (max.): 8,000 rpm, rotational speed (min.): 100 rpm, type of input current: AC, bar passage: 12 mm, feed length Z-axis: 120 mm, total width: 770 mm, total length: 1,500 mm, bar diameter (max.): 12 mm, working length: 135 mm, rapid traverse X-axis: 21 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 15 m/min, input voltage: 400 V, power: 2.2 kW (2.99 HP), travel distance Z-axis: 120 mm, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this well-maintained Cincom Lincom B2 sliding head lathe, year of manufacture 1999. Condition: Used, very good Description TECHNICAL DATA - Number of axes: 4 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Max. machining length: 135 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 0.001 degrees SUB-SPINDLE - Max. bar diameter: 12 mm - Z-axis travel: 135 mm - Spindle speed: 8,000 rpm BUSH HOLDER 1 - Number of positions: 5 FRONT TOOLPOST - Number of positions: 3 Bsdpfeynwgpjx Ah Ijwi BACKWORKING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V DIMENSIONS AND WEIGHT - Footprint: 1500 x 770 mm - Machine weight: 1,400 kg EQUIPMENT - CNC control: Fanuc - Parts removal device - Parts ejector - Coolant tank - Electrical transformer The machine is under power and can be inspected at any time. If you have any questions or require further information, please do not hesitate to contact us. Disclaimer: Sale is exclusively to businesses within the meaning of § 14 BGB, not to consumers as defined by § 13 BGB. By placing an offer, the buyer confirms their commercial activity. All information in this advertisement has been provided to the best of our knowledge and belief. Errors, misprints, prior sale, and technical changes are expressly reserved. Only the characteristics specified in the written purchase contract are binding. The machine is sold without any warranty against material defects. Any warranty is excluded to the extent permitted by law. This exclusion does not apply to claims for damages arising from intentional or grossly negligent conduct or in the event of injury to life, body, or health. No guarantee or assurance of specific properties is provided. The machine is sold as inspected and under exclusion of any returns. Sale is ex works. Transport, loading, and shipping are at the buyer's risk and expense unless otherwise agreed in writing.

Condition: good (used), Year of construction: 2004, CNC long-turning automatic machine Manufacturer: CITIZEN Type: C16 VII Year of manufacture: 2004 with: Mitsubishi Meldas control Synchron spindle Driven tools Bwjdpfx Asynf Uzsh Isi Back machining High pressure pump Oil mist extraction system Fire extinguishing system Bar loader magazine IEMCA GENIUS 118

Condition: used, Year of construction: 2002, Lot consists of: (1) Vertical Turning Machine Technical Details: Equipped with: - CNC control Siemens 840 D - Tool turret with 12 stations VDI 40 - Driven tool positions at stations 1/4/7/10 - Workpiece conveyor belt - Chip conveyor - No coolant pump (central system) - Turning diameter: 200 mm Bsdpfx Asym Rmmjh Iewi - Swing diameter: 250 mm - Turning height: 350 mm - Control: Siemens Sinumerik 840 D - Spindle front bearing diameter: 100 mm - Feed range: 0.1 - 20,000 mm/min - Rapid traverse: 20 m/min - Stroke of vertical slide: 300 mm - Spindle nose according to DIN 55026 – size A6 - Main spindle speed: 50 - 6,500 rpm - Tool drive speed range: 0 - 3,000 rpm - Total connected load: 40 kW - Machine weight approx. 8 t - Floor space required approx. 4.5 x 4.0 x 3.5 m The machine is currently in storage. Images shown do not necessarily reflect its current condition while in storage.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: K00447, General data: • Year of manufacture: 11/2006 • Serial number: K00447 • Manufacturer: Citizen Machinery Co., Ltd. (Miyota Nagano, Japan) • Machine weight: 1,950 kg Overall dimensions: • Width: 1,610 mm • Depth: 1,850 mm • Height: 1,050 mm Technical data: • Max. bar diameter: 16 mm • Max. turning length: 200 mm • Main spindle speed: 15,000 rpm (2.2 / 3.7 kW) • Counter spindle speed: 10,000 rpm (0.55 / 1.1 kW) • Control: Fanuc Series 31i • Number of axes: X1, Y1, Z1, Z2, C1, C2 • Full C axis on both spindles • High pressure pump 20 bar, 2-channel Tool configuration: Front tool post: • T1–T5 – fixed tools • T11–T14 – driven tools (radial or axial) Tool holder: • T21–T24 – fixed tools for work on the main spindle • T31–T34 – fixed tools for work on the counter spindle Equipment: • IEMCA Genius 118 Type 37 LL bar feeder (year of manufacture 2007, serial number 020704BA04) • Guide bushings (complete set) • Fixed and driven tooling • High-pressure pump 20 bar / 2 channels Bsdpoymzbuofx Ah Iewi The set also includes a large set of guide bushings (GB) and bushings for the IEMCA feeder in various diameters – visible in the photos. The photos show the complete set of tools for two identical machines that we sell. • when purchasing both machines – we provide the entire set of bushings • when purchasing one machine – the tooling will be divided between the machines Technical condition: The machine is in very good technical condition, fully operational, ready for use. Regularly serviced and used in precision manufacturing. Additional information: • Nameplate: type K16 VIP, serial number K00446, date of manufacture 11/2006, weight 1,950 kg. • Possibility of demonstrating the machine under voltage.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: K00446, General data: • Year of manufacture: 11/2006 • Serial number: K00446 • Manufacturer: Citizen Machinery Co., Ltd. (Miyota Nagano, Japan) Bodpeymy Erjfx Ah Iowi • Machine weight: 1,950 kg Overall dimensions: • Width: 1,610 mm • Depth: 1,850 mm • Height: 1,050 mm Technical data: • Max. bar diameter: 16 mm • Max. turning length: 200 mm • Main spindle speed: 15,000 rpm (2.2 / 3.7 kW) • Counter spindle speed: 10,000 rpm (0.55 / 1.1 kW) • Control: Fanuc Series 31i • Number of axes: X1, Y1, Z1, Z2, C1, C2 • Full C axis on both spindles • High pressure pump 20 bar, 2-channel Tool configuration: Front tool post: • T1–T5 – fixed tools • T11–T14 – driven tools (radial or axial) Tool holder: • T21–T24 – fixed tools for work on the main spindle • T31–T34 – fixed tools for work on the counter spindle Equipment: • IEMCA Genius 118 Type 37 LL bar feeder (year of manufacture 2007, serial number 020704BA04) • Guide bushings (complete set) • Fixed and driven tooling • High-pressure pump 20 bar / 2 channels The set also includes a large set of guide bushings (GB) and bushings for the IEMCA feeder in various diameters – visible in the photos. The photos show the complete set of tools for two identical machines that we sell. • when purchasing both machines – we provide the entire set of bushings • when purchasing one machine – the tooling will be divided between the machines Technical condition: The machine is in very good technical condition, fully operational, ready for use. Regularly serviced and used in precision manufacturing. Additional information: • Nameplate: type K16 VIP, serial number K00446, date of manufacture 11/2006, weight 1,950 kg. • Possibility of demonstrating the machine under voltage.

Condition: used, Year of construction: 2019, machine/vehicle number: IntNr231494, FANUC, high-performance computer series 31i-B5, Well maintained, approx. 9,000 operating hours Technical Main Data Working Range Max. bar diameter: 38 mm Max. machining length (with guide bushing): approx. 320 mm Machining without guide bushing possible (for shorter workpieces) Max. collet diameter at sub spindle: 38 mm Main Spindle Spindle power: approx. 11–15 kW Max. speed: approx. 7,000 rpm Integrated C-axis (0.001° resolution) High-precision spindle bearings for heavy-duty machining Sub Spindle Power: approx. 5.5–7.5 kW Max. speed: approx. 7,000 rpm Full-function C-axis Part transfer and rear machining in one setup Axis Configuration X1 / Z1 (main system) X2 / Z2 (sub spindle system) Y-axis for off-center milling operations C-axis on main and sub spindle Optional B-axis type swivel functions (depending on equipment) Multi-channel control enables simultaneous machining on main and sub spindle for significantly reduced cycle times. Tooling Tool holder set (non-driven) Guide bushing unit (pull system, JBS) Oil cooler unit High-pressure conveyor (with integrated high-pressure unit), type Müller combistream CS 3 Coolant: oil Weight: 6.25 t Dimensions (LxWxH): 3477x1860x1865 mm The machine can be inspected under power by appointment. Subject to changes and errors in technical data and specifications as well as prior sale! Bwedpoymmkbefx Ah Ioi

Condition: used, Year of construction: 2000, operating hours: 43,000 h, machine/vehicle number: IntNr231493, STAR SA 16-12 CNC sliding headstock lathe, year of manufacture 2000 CNC control: FANUC 18i-T Operating hours: 43,000 Bjdpfx Asymmbaeh Iowi Technical specifications: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 12 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 SUB SPINDLE - Maximum bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 FMB Minimag bar feeder The machine can be inspected under power by appointment. Subject to prior sale. Technical data and specifications subject to change and correction.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Technical details working diameter max. 32 mm spindle passage 36 mm turning length 320 mm Control MITSUBISHI MELDAS 635LC travel max. (X1) 108 mm travel max. (Y1) 275 mm travel max. (Z1) 325 mm travel max. (X3) 238 mm travel max. (Z3) 410 mm main spindle speeds: 200 - 8000 U/min c-axis 0,001° deg. Subspindle spindle speeds 200 - 7000 U/min c-axis 0,001° deg. rapid traverse 20 m/min main drive 3,7 / 5,5 kW Subspindle motor 1,5 / 2,2 kW dimensions of machine 2,77 x 1,24 x 1,79 m weight of the machine ca. 2850 kg Additional information CNC Swiss-Type Lathe First put into operation December 2005 The machine was used for a single shift and is in good condition with no maintenance backlog. Equipment: FMB Turbo 5-42/3200C bar loader, built 2004 High-pressure pump Many collet chucks for main spindle Various collets Drive unit for synchronously driven guide bush Synchronously driven guide bush Drive unit for transversely driven spindle on linear support Pick-up spindle Bsdpfeymli Asx Ah Iswi Collet chuck for pick-up spindle Blow-out device for pick-up spindle Five fixed tool holders on the rear Workpiece removal device Coolant tank Central lubrication system Door lock Ejection device for workpieces with through holes Machine documentation The machine will be sold without tools and extraction system.

Condition: good (used), Year of construction: 2014, functionality: fully functional, The machine is in good technical condition, with testing possible by prior arrangement. Three machines are available: year 2014/5, 2014/8, and 2015/6. The offered price is for 1 unit. Operating hours: 31,316. Accessories: - MBC (BROXTEC) chip conveyor with link chain - workpiece conveyor belt - FMB Minimag 3200 bar feeder (⌀ 8). Description: The machine was used for series production of small parts with extreme precision from standard, relatively soft material. The machine was not subject to dynamic loads. Production was carried out using oil. Regular maintenance, almost continuous bearing replacement, etc., all in perfect condition. The listed price is for 1 machine. Bwjdpfoymg H Aox Ah Isi

Condition: good (used), Year of construction: 2004, functionality: fully functional, overall weight: 2,850 kg, Equipment: documentation/manual, Due to the end of production, we are selling a well-maintained Citizen C32 VIII automatic lathe, year 2004. Equipment: - 2x spindles - Driven tools - 6 programmable axes - 2x C axes - Chip conveyor - Iemca bar feeder (Boss 332 E/R, year 2005) - Parts conveyor - Signal lamp - Fire extinguisher Type: C32 VIII Machine number: MCL2032/0413 Year of manufacture: 2004 Weight: 2850 kg Serial number: X12018 It is also possible to agree on the purchase of additional equipment (oil mist extractor, parts centrifuge, compressor, etc.). If you have any further questions or need more information, please send us a message or call us. Bwjdpeyl St Sofx Ah Isi

Condition: reconditioned (used), Year of construction: 2016, CNC Sliding Headstock Automatic Lathe TRAUB TNL 32 9P With TX 8 i - p control Bedpoylnxqefx Ah Ijwi Year of manufacture: 2016 Spindle bore: 32 mm MAIN SPINDLE Speed range: max. 6400 rpm C axis SUB SPINDLE Speed range: max. 6000 rpm C axis UPPER TOOL TURRET: Speed range: max. 12000 rpm 10-position turret (all driven) UPPER TOOL TURRET: Speed range: max. 12000 rpm 9-position turret (all driven) BACK WORKING UNIT Number of stations: 8 Powered stations: 3 (T12, T13, and T14) Speed T12 + T14 (12000 rpm) Speed T13 (4000 rpm) Including the following accessories: Full enclosure with interior lighting Various driven tools Various tool holders IEMCA Boss 338-HD bar loader Coolant pump 20 bar Chip conveyor Operating manuals

Condition: used, Year of construction: 2011, bar material dia. 20 mm spindle passage 22 mm turning length 170 mm turning speeds 10.000 U/min positive location each C-Achse 0,001° Grad gripping station 20 positive location each 1° Grad turning speeds 10.000 U/min number of tools 7+4+8 number of milling stations 3 control Fanuc Oi-TD Bwsdpjylcm Njfx Ah Isi turning length 170 mm Number of axles 5 St. spindle hours 16.000 h Number of working hours 35.000 h total power requirement 11 kW weight of the machine ca. 1900 kg dimensions of the machine ca. 1,64 x 1,2 x 1,73 + SBF m swiss type machine Tornos Delta 20/5, built 2011, with barloader Robobar SBF 20e Excellent conditions,from precision engineering

Condition: excellent (used), Year of construction: 2013, operating hours: 31,008 h, functionality: fully functional, machine/vehicle number: 6050351, TRAUB TNL 18 – CNC Swiss-/Short-Turn Lathe Machine type: TNL 18, model TNL18-9 Application: Suitable for Swiss and short-turn machining Manufacturer: TRAUB Drehmaschinen GmbH & Co. KG Control / CNC Control system: TX8i-s with 64-bit RISC CNC/PLC processor USB interface PC connection via fiber optic cable, including TFT flat panel display (color) and electronic handwheel Software package: Helical, Polyform Thread cutting without compensating chuck Parting tool break monitoring Axis shut-off (GSP to block position) Spindles / Axes / Clamping Technology Main spindle with belt drive Incl. hollow clamping cylinder C-axis Change parts for collet chuck F25 (145E) TNL 18 interface for driven guide bush, adjustable, type T223 Change parts for short-turn operation Sub spindle with belt drive Incl. hollow clamping cylinder X-Z-C-axis Part flushing unit for flushing workpieces from the sub spindle Change parts for collet chuck F25 Tool System Lower tool turret: X-Y-Z-H-axis, integrated drive, 8 tool stations, 5 closure plugs Upper tool turret: X-Y-Z-H-axis, integrated drive, 8 tool stations Measuring Systems / Additional Axes Glass scale X-axis (upper/lower turret) Glass scale X4-axis (sub spindle) Actuation for driven and programmable guide bush (positioning/options package for guide bush) Workpiece Discharge / Peripheral Equipment Workpiece removal unit through the sub spindle (RSP) Front workpiece removal unit to parts conveyor Chip conveyor: hinge belt, discharge height 910 mm Hand flushing unit for the working area Central extraction connection: D 150 mm Coolant / Filtration / High Pressure Note from documentation: Machine to be operated exclusively with cutting oil (fire protection system recommended if there is fire/explosion risk) Coolant supply: 3/8 bar, 500 l tank Compact band filter on 500-l coolant tank Flow rate: approx. 100 l/min with emulsion, approx. 70 l/min with cutting oil Filtration fineness: approx. 30–40 micron VB-T internal coolant supply up to 30 bar (upper/lower tool turret) VBT 80–120 bar (valve/station details per list) High-pressure coolant pump 120 bar incl. 25 µm micro filter Immersion cooler for coolant cooling Coolant pump 20 bar Coolant: cutting oil (position in list) Safety / Fire Protection Automatic CO₂ extinguishing system (VBT) For customer-supplied operating materials/oils/coolants: Safety Data Sheets & technical data sheets required before delivery (see documentation note) Electrics / Standards / Documentation Electrical equipment: 400 V / 50 Hz, Europe (VDE/EN 60204) EC Declaration of Conformity & CE marking Color scheme: RAL7037 (machine/chassis), RAL7035 (covers) User documentation: on CD/paper, plus 2 German user manuals Bsdpfx Ajylan Deh Ijwi Interfaces / Monitoring TRAUB tool monitoring for TX8i-s VB-T network connection for TX8i-s control VB-T hydraulic oil supply WT lower, station 1 (for hydraulic gripper W7040021) Bar Feeder / Magazine Accessories Magazine adapter parts for use without reduction sleeves for: LNS, FMB Maschinenbaugesellschaft mbH, IEMCA Magazine must be equipped with shuttle unit for changeover operation Additions as per list: Add reduction sleeves MSP/RSP FMB-MINIMAG 20 with RSP shuttle unit The equipment is being sold at the Tuttlingen plant, furthermore for sale: MAZAK Quick Turn 200 MSY, year 2019 (installed 07/2020)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: rotational speed infinitely variable, Citizen R07-VI CNC Swiss-type lathe Year of construction 2015, in very good condition, annual maintenance has been carried out every year since new 2 identical machines are available, both ready for immediate delivery Control: Fanuc Max. machining diameter: 7mm Number of servo axes: 6 Z1/X1/Y1/X2/Y2/Z2 Number of C-axes: 2 main and sub-spindle Number of tool positions: 5x turning tool holders / 2x driven tool positions / 3x drilling stations front and rear Including accessories: Iemca Elite 112 EVO bar feeder Büchele SFB-100 high-pressure unit Kraft und Bauer fire extinguishing system Bwodpfx Aheyk Iv Tj Isi

Condition: excellent (used), Year of construction: 2007, operating hours: 25,181 h, functionality: fully functional, EQUIPMENT: Synchronous spindle Driven tools C-axis Rear-side machining Parts conveyor belt FMB Turbo bar feeder magazine Bwedpfx Ajyk A Ukjh Iei Chip conveyor

Condition: ready for operation (used), Year of construction: 2015, spindle motor power: 7,500 W, spindle speed (max.): 7,000 rpm, overall weight: 2,200 kg, total height: 1,700 mm, workpiece diameter (max.): 32 mm, number of axes: 7, This 7-axis Star SR-20J type C Swiss Type Turning was manufactured in 2015. It features a maximum machining diameter of 32mm, headstock stroke of 310mm, and spindle speeds up to 7,000rpm. Equipped with a Hydrajet BF20-2000 high-pressure coolant system and an Absolent A.Mist 10S mist extraction unit, the Star SR-20J type C represents a robust addition to any machining setup. Contact us for further details regarding this Swiss Type Turning. Additional equipment • High Pressure Coolant System: Hydrajet BF20-2000 • Mist Extraction Unit: Absolent A.Mist 10S • Fire Suppressor: Stat X • Signal Production Tower: Werna Machine Benefits Qualitative Machine Benefits Bjdsyi Emtepfx Ah Iowi • Includes comprehensive safety and environmental management systems (fire suppressor, mist extraction) Technical Machine Benefits • Rapid feed rate 24m/min, maximum spindle speed 7000 rpm, maximum driven tool speed 6000 rpm Extra Information Manuals included Machine still under power Dimensions Machine Depth 2250 mm

Condition: ready for operation (used), Year of construction: 2004, spindle motor power: 3,700 W, spindle speed (max.): 10,000 rpm, controller manufacturer: FANUC, controller model: Series 18i-TB, number of axes: 7, This STAR SR-20 R II Lathe was manufactured in the year 2004. It is equipped with a Fanuc Series 18i-TB control unit and has 7 axis. The machine has a spindle speed of 500-10000 rpm. Machine Benefits Technical Machine Benefits Bwsdpoyi Emmefx Ah Isi • Turning length: 205 mm • Max. Bar diameter: Ø 20 mm • Max. Turning diameter from bar: Ø 20 mm • Counter-spindle rotation speed: 8000 rpm, engine power: 2. 2 kw • Fmb bar loader mod. Turbo 3-26/3200/a

Condition: ready for operation (used), Year of construction: 2007, spindle motor power: 5,500 W, spindle speed (max.): 8,000 rpm, overall weight: 3,200 kg, This CITIZEN M32V Swiss Type Turning was manufactured in the year 2007 in Japan. The machine has a spindle speed of 8000 rpm. Official brochure attached for more details. Machine Benefits Technical Machine Benefits • Max chucking barstock: Ø 32 mm • Max machining lenght: 320 mm • Max drilling diameter main spindle: Ø 12 mm • Max back-spindle drilling: Ø 10 mm • Max. Back-spindle rotating speed: 7000 rpm • Max. Back-spindle power: 2 kw • Gang rotary tool: 5 fixed tools • Turret tools: 10 positions • Bar feeder: iemca boss 332 e/r type 37ll Bsdpfeyi Einex Ah Iewi • Equipment: chip conveyor

Condition: ready for operation (used), Year of construction: 2005, spindle motor power: 7,500 W, spindle speed (max.): 8,000 rpm, This CITIZEN M32 III Swiss Type Turning was manufactured in the year 2005. It is equipped with a Cincom control unit. The machine has a spindle speed of 8000 rpm. See official brochure attached for more details. Machine Benefits Technical Machine Benefits • Max chucking barstock: Ø 32 mm • Max machining lenght: 320 mm • Max drilling diameter main spindle: Ø 12 mm • Max back-spindle drilling: Ø 10 mm • Max. Back-spindle rotating speed: 7. 000 rpm, max. Back-spindle power: 3,5 kw • Gang rotary tool: 5 fixed tools + 4 driven tools Bwedpfx Ajyi Eihjh Ioi • Turret tools: 10 positions • Bar feeder: iemca boss 332 e/r type 37ll - year 2008 • Equipment: chip conveyor