Ralf Bondo UG

Condition: good (used), Year of construction: 2010, functionality: fully functional, with sliding table featuring workpiece handling device 400 V, grinding belt speed: v=4 - 25 m/s Drive of the grinding belt via frequency-controlled three-phase motor with P = 4.0 kW Dedpfx Agjxgpbuohscn Frequency inverter with brake chopper for deceleration in max. 10 s Max. workpiece weight with area load: 100 kg Motorized table height adjustment on roller guides up to max. 480 mm Drive by gear motor with P = 0.55 kW, adjustment speed v = 0.9 m/min Table size 3000x1000 mm, sanding belt 100x9000 mm Extraction nozzle with D=200 mm on the left machine column Required extraction capacity approx. 3400 m³/h Standard machine color: RAL 5015 (sky blue), RAL 7044 (silk grey); Control cabinets and terminal boxes: RAL 7032 (pebble grey)

Condition: used, Year of construction: 2018, width of the strips 100 mm band length 2000 mm band speed 15.0 + 30.0 m/sec tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad Dust suction hood 2 x 75 mm motor speeds: 1420 / 2660 Upm. face grinding attachment 400 x 100 mm total power requirement 2.2 / 2.8 kW Dodpfxsxachbs Aghocn weight of the machine ca. 167 kg. range L-W-H 750 x 1400 x 1200 mm New price including accessories approx. 2.000 euros Special price on request Grinding rolls included in delivery The KRPS DUO is a multifunctional grinding machine for pipe and profile end grinding on the front, for grinding edges, surfaces and for circular grinding on the back as well as for surface grinding on thetop of the machine. Equipment: - Consistent belt tension thanks to spring-loaded clamping device - Standard with circular grinding device - for grinding diameters of diam. 20 - 76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the surface grinding surface increases . the sliding properties of the grinding belt - Large-dimensioned surface grinding surface with protective cover - Slow belt speed (15 m/sec.) - ideal for grinding stainless steel and aluminum - User-friendly belt change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30° to 90° are easily possible - Shorter processing times compared to milling * Special accessories included - 5x grinding rollers

Condition: new, width of the strips 150 mm band length 2280 mm revolutions per minute 2880 U/min roll diameter 140 / 80 mm table-size 700 x 350 mm engine output 3.0 kW weight 250 kg range L-W-H 1300 x 800 x 1500 mm Dcodpfx Agsxab R Ijhon - Machinevideo - ?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29.0 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 72.0 kg range L-W-H 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 75 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Abrasive belt 75 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop Djdpfxsxab Ako Aghecn - Dust extraction nozzle - Separate off button - Machine base

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 66.0 kg range L-W-H 1080 x 440 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 Dcedoxabtiepfx Aghsn - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment Dcsdoxabtcepfx Aghjn - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 90.0 kg range L-W-H 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 150 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding Djdpfxsxabp De Aghecn - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt 150 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Machine base

Condition: new, width of the strips 150 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 150 Plantisch mm Dsdpfx Agsxabkzehocn Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight of the machine ca. 84.0 kg range L-W-H 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 150 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 100 kg range L-W-H 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned Dcedpfjxabhgsx Aghon - this automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for longest service life and smooth running - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed optimized in terms of design - thus burning the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible extraction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight 84.0 kg range L-W-H 1080 x 520 x 1000 mm Dsdpfx Agexabf Eehscn Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sec grinding width 75 x 430 mm Dcsdpsxabaiefx Aghjn engine output 3.0 kW weight 75.0 kg including machine base Furnishing: - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable - Patented strap tensioning system - Robust three-phase motor - Low vibration

Condition: new, width of the strips 150 mm band length 2000 mm revolutions per minute 3000 U/min engine output 4.0 kW Dcsdpjxaa Swsfx Aghen weight 93.0 kg including machine base High-performance grinder for standard grinding applications for extra wide workpieces. Furnishing: - High-performance belt sander with a stable machine base - Constant speed with high cutting performance thanks to the robust 4 kW motor - Very good price-performance ratio - Removable chip catcher - Patented strap tensioning system - Low vibration due to robust construction

Condition: as good as new (ex-display), Year of construction: 2022, width of the strips 50.0 mm band length 940 mm band speed 3.0 - 22 m/min turning speeds 1450 U/min tube diameter 16.0 - 114 mm radius 180 ° total power requirement 4.75 kW Djdpexaaxqsfx Aghjcn weight of the machine ca. 265 kg range L-W-H 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

Condition: new, width of the strips 100 mm band length 920 mm band speed 7.0 m/sec loading area 300 x 150 mm motor 0.44 KW motor 220 Volt Djdoxaatujpfx Aghocn range L-W-H 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29 m/sek Djdpfxexaarqo Aghocn grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 67.0 kg range L-W-H 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 343.0 mm/sek grinding width 530 Plantisch mm table height 475 - 1240 mm total power requirement 3.0 kW weight of the machine ca. 100 kg range L-W-H 500 x 1010 x 1000 mm Description: The belt sander models TAS 75 and 150 are powerful Quality machines, built according to the strictest environmental and Safety regulations. The belt sanders are standard with motor brake, adjustable working height, eye protection, Angle stop and motor protection switch with zero voltage release built. The low-noise machine with CE mark is suitable Dcedpfx Agexaaq Tohon ideal for grinding all metals. Furnishing: - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful engine 3.6 kW - suction nozzle including: integrated suction

Condition: new, width of the strips 200 mm band length 1490 mm band speed 8.0 m/sec motor 400 Volt loading area 500 x 280 mm total power requirement 1.5 kW Dedoxaapvepfx Aghscn Dimensions (HxWxD) 750 x 600 x 340 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 100 mm band length 920 mm band speed 7.0 m/sec loading area 300 x 150 mm Dcjdpfx Agjxaappehsn motor 0.44 KW motor 400 Volt range L-W-H 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 300 mm band length 2070 mm band speed 7.0 m/sec surface of working table 750 x 380 mm diameter 87.7 Führungsrollen mm engine output 1.5 kW total power requirement 400 Volt Dcsdpfx Agsxaapijhsn weight of the machine ca. 88.0 kg. range L-W-H 1050 x 600 x 400 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 45.0 mm band length 850 mm band speed 8.0 m/sek. voltage 230 V total power requirement 0.18 kW MADE IN GERMANY Furnishing : - robust electric motor belt sander Dcjdpfx Aexaanroghsn - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: good (used), Year of construction: 2020, machine/vehicle number: 2020-12-015036, Offer 25142 Year of manufacture: 2020 Technical data: - Abrasive belt dimensions: 2000 x 150 mm - Surface grinding opening: 430 x 150 mm Dsdpfx Agew Ug A Tehscn - Abrasive belt speed: 36 m/min - Contact wheel: B 150 / D 200 - Drive wheel: B 150 / D 200 - Drive: 400 V / 3450 rpm / 4 kW - Adjustable working height: 475 - 1240 mm - Motorized dust extraction, type GIBE - Required space approx.: W 580 x H 1250 x D 1000 mm - Weight approx.: 110 kg

Condition: good (used), Year of construction: 2015, machine/vehicle number: 2015-04-070408, Offer 25155 Technical Data: - Abrasive belt dimensions: 2000 x 150 mm - Surface grinding opening: 430 x 150 mm - Abrasive belt speed: 36 m/min - Contact wheel: B 150 / D 200 mm Dcjdpfx Aow Ugvteghen - Drive wheel: B 150 / D 200 mm - Drive: 400 V / 3450 rpm / 4 kW - Adjustable working height: 475 – 1240 mm - Motorised dust extraction, type GIBE - Space requirement approx.: W 580 x H 1250 x D 1000 mm - Weight approx.: 110 kg

Condition: used, width of the strips 75 mm band length 2000 mm band speed 38 m/sek total power requirement 3 kW weight of the machine ca. 90 kg dimensions of the machine ca. 500 x 1000 x 950 mm for efficient and at the same time economical sanding of surfaces and edges and rounding parts made of carbon, stainless steel, aluminum and others non-ferrous metals such as wood and plastic. Contact wheel diameter: 200 mm Nominal diameter of the extraction socket outside: 100 mm Sound pressure level: 87 dBA - Number of speeds: 2-speed - 1 pc sanding belt 75 x 2000 mm grit 80 Dcedpow Tnfaefx Aghen

Condition: good (used), Year of construction: 1995, Offer 73066 Technical data: - Abrasive belt dimensions approx.: 2000 x 150 mm - Surface grinding opening approx.: 560 x 150 mm - Abrasive belt speed approx.: 30 m/sec - Contact wheel: W 150 / D 200 mm - Drive wheel: W 150 / D 200 mm - Drive: 400 V / 3 kW - Adjustable working height - Separate motorized dust extraction Dodpfxsw R Tcxo Aghocn - Required space approx.: W 750 x H 1050 x D 1500 mm - Space requirement for extraction unit approx.: W 750 x H 1250 x D 750 mm - Weight approx.: 180 kg

Condition: new, Offering a large batch of sanding belts. Dcedow Hpchjpfx Aghsn All belts are 3200 mm long. Grit sizes are 60, 80 and 100. Widths are 100 mm, 300 mm and 405 mm. Manufacturers are Hermes and Starcke. A total of approx. 550 pieces available (several Euro pallets).