SWV GmbH

Year of construction: 2016, condition: used, Sewing machine Muller Martini Ventura MC 200 (A371.1000) Year: 2016 Cycles: 1,5 mio (stitches) Description: - Commander with touchscreen - Automatic setting - Feeder - ASIR Automatic Signature Image Recognition: ASIR III Gjdpfoz Atcusx Adtjug - 4 + 4 opening possibilities - Book stacker - PIAB Max. mechanical speed: up to 200 cycles/min Maximum size range: 510 x 320 mm Minimum size range: 120 x 75 mm Number of stitches: 13 Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: like new (used), Year of construction: 2021, For sale is a Hammer A3-41 jointer-planer, a demonstration model with a planing length of 1800 mm. The machine has been inspected by our qualified personnel and is in like-new condition. Technical data: - 3-system cutterhead - Planing width 410 mm - Planing length 1800 mm - Max. feed height 225 mm - Dust extraction port Ø 120 mm - Motor power 4 kW - Year of manufacture 2021 Guodpfxoz Atb Dj Adtog The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, planer, thicknesser, jointing, planing Reference: R-A0117

Year of construction: 2015, condition: good (used), Parts shown by hand not come. Gsdpfez Atbwex Adteug

Condition: used, Channel lining Height: 2.40 meters Width: 3.40 meters Guodpfx Adez Atbqstsg Channel width: 1.10 - 1.60 meters

Condition: excellent (used), Year of construction: 2021, For sale is a used Hammer A3-41 surfacing and thicknessing machine with a surfacing length of 1800 mm. The machine has been inspected by our qualified personnel and is in very good condition. Technical specifications: - Silent Power spiral cutterhead - Planing width 410 mm - Surfacing length 1800 mm - Max. feed height 225 mm - Dust extraction connection Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2021 Guedoz Atbkopfx Adtog The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: surfacing machine, thicknessing machine, planing machine, surfacing, thicknessing Reference: R-L0BHX

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,705 mm, travel distance Z-axis: 250 mm, input voltage: 34,000 V, table length: 3,700 mm, table width: 2,050 mm, operating pressure: 4,150 bar, total height: 3,900 mm, total length: 5,700 mm, total width: 2,550 mm, overall weight: 11,000 kg, product height (max.): 250 mm, For sale is a CNC 5-axis hydro abrasive waterjet cutting system, C.M.S. Tecnocut, including: - CNC Z-axis with 250 mm stroke - Automatic chain conveyor - Abrasive feed system - Electrical system and control cabinet - Reel for water and air - Automatic metering of cutting sand with vacuum monitoring - Additional control panel (manual control) - Automatic central lubrication system - Cooling unit for electrical equipment - Osai CNC control - 34 kW high-pressure pump, Greenjet, 4150 bar, 5 ltr./min. - 5-axis: X 0 to -638 mm / Y 0 to -1028 mm / Z 350 to -100 mm, stroke 250 mm - Programming software TC 2020 - CNC-controlled lathe, R-axis, /min, internal diameter 40 mm / max 200, length 2930 mm / max weight 400 kg - Anti-collision sensor - AWJ anti-reflection plates, spacing 70 mm Gjdpfx Adez Atbdeteug - Laser for zero point determination - Spray device for cutting head Without warranty, as is, self-removal + shipping Immediately available More pictures to follow -

Condition: excellent (used), functionality: fully functional, mileage: 28,700 km, power: 130 kW (176.75 HP), first registration: 06/2024, fuel type: diesel, tire condition: 60 %, next inspection (TÜV): 08/2028, fuel: diesel, color: black, gearing type: automatic, number of gears: 6, emission class: euro6d-temp, number of seats: 9, total length: 5,306 mm, total width: 1,920 mm, total height: 1,877 mm, Year of construction: 2024, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, blind spot assist, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, hill-start assist, lane keeping assist, non-smoking vehicle, onboard computer, power assisted steering, power mirror, rear view camera, sliding door, soot filter, start-stop system, tire pressure monitoring, traction control, Transmission: Automatic Technology: Onboard computer, particulate filter, start-stop system, fully digital instrument cluster Assistance Systems: Blind spot monitoring, driver fatigue detection, traffic sign recognition, rain sensor, high beam assistant, light sensor, emergency braking assistant, hill-start assist, lane keeping assistant, distance/collision warning Comfort: Automatic climate control, power steering, heated seats, keyless start, Park Distance Control (front and rear), speed limiter, remote control Visibility: LED daytime running lights, heated exterior mirrors, reversing camera Gsdpfxjz Ata Tj Adtoug Safety: ABS, airbags, ESP, tire pressure monitoring, child seat anchor, emergency call system

Condition: good (used), Year of construction: 2005, operating hours: 4,630 h, turning length: 1,585 mm, spindle motor power: 30,000 W, spindle speed (max.): 3,300 rpm, spindle bore: 102 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 115 mm, travel distance Z-axis: 1,585 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 2,700 mm, overall weight: 14,500 kg, Multi-tasking lathe MAZAK - INTEGREX 400 III-S MACH-ID 9809 Make: MAZAK Type: INTEGREX 400 III-S Control: MAZATROL 640 MT PRO Year: 2005 Only 4630 Cutting hours Automatic door 40 CAPTCO C6-Tool magazin Robot interface Gsdpfx Adsz Ata Hsteug 5 Axis simulteneous package Sub spindel with C-Axis and 0,0001 Degree Internal Grundfos 15 Bar coolant Chip conveyor Optional tooling package with 40 holders Max. turning Ø: 850mm X-Axis: 630mm Y-Axis: -115 to + 115mm Z-Axis: 1585mm B Axis: -30 to +195° Spindle bore: 102mm Speedrange: 3300Rpm Spindle power: 30kW Subspindle speeds:3300Rpm Subspindle bore: 102mm Subspindle power: 26kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm B-Axis power: 19kW Chip conveyor: Yes Tool eye: Yes Hours: 4630H Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, 2 x LTW channel lining Height: 1.50 meters Width: 3.00 meters Gedez Atayepfx Adtoug Channel width: 90 - 140 cm

Condition: used, Year of construction: 2016, Parker AKM 60 Gjdpfjz Atagsx Adteug

Condition: used, Machine: CSF Product feeding pump Gsdpfx Adjz Ataajtsug

Condition: used, Borelli cap chute for MCA 28 mm. Item number: ID6133. Gjdez Ar U Nspfx Adtsug

Condition: new, functionality: fully functional, 1 unused crushing jaw, presumably for a Pegson 800 x 500. Dimensions approximately 1100 x 800 x 100 mm. Toothed design. One-time special price. Available immediately. Subject to prior sale. Godpfx Adsz Ar U Astsug

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,050 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller manufacturer: FANUC, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis OKK HM630 was manufactured in 2011. It features an X-axis travel of 1050 mm, Y-axis travel of 900 mm, and Z-axis travel of 900 mm. The machine is equipped with a spindle speed of 12,000 rpm and a tool magazine capacity of 60 tools. If you are looking to get high-quality machining capabilities, consider the OKK HM630 horizontal machining centre we have for sale. Contact us for further details. Technical Specification Gjdpfxjz Ar Uve Adtjug Taper Size BT 50

Condition: used, Machine: Cooling unit Guodpfxjz Ar Upj Adtjg

Condition: used, Year of construction: 2004, Handle applicator for carton, tray and six pack Gusdpfsz Ar Uijx Adtog

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 1,045 mm, spindle motor power: 18,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 82 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 1,045 mm, total height: 2,900 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,200 kg, Multi-tasking lathe MAZAK - INTEGREX 200-4 S MACH-ID 9810 Make: MAZAK Type: INTEGREX 200-4 S Control: MAZATROL MATRIX Year: 2010 The Mazak INTEGREX 200-IV S is a multi-tasking CNC turning and milling center with a second/sub-spindle. The “S” indicates the sub-spindle, allowing complete machining of both sides of a workpiece in a single setup. Typical specifications include a maximum machining diameter of approximately 660 mm, a machining length of around 995 mm, and X/Y/Z travels of approximately 580 / 160 / 1,045 mm. The machine features a B-axis milling head, a main spindle and sub-spindle up to approximately 5,000 rpm, and a milling spindle typically capable of 12,000 rpm. It normally uses Capto C6 tooling and is often equipped with a 40-position automatic tool changer. Machines manufactured around 2006–2010 are commonly equipped with the Mazatrol Matrix CNC control. The INTEGREX 200-IV S is designed for complete machining of complex components, combining turning, milling, drilling, tapping and 5-axis positioning in one machine. This significantly reduces the number of setups and eliminates the need to move components between separate turning and milling machines. Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1045mm B Axis: 225° Spindle bore: 82mm Guodpfx Adez Ar Ucjtjg Speedrange: 5000Rpm Spindle power: 18.5kW Subspindle speeds:6000Rpm Subspindle bore: 82mm Subspindle power:18.5kW ATC / revolver: 80 Speed live tools:12.000Rpm Length: 4500mm Width: 2400mm Height: 2900mm Weight: 9200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1978, Liter per hour: 7000 Gsdpfx Ajz Ar T Sjdtjug

Condition: excellent (used), Year of construction: 2013, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 05200, travel distance X-axis: 2,300 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 50 rpm, table width: 1,300 mm, table load: 10,000 kg, table length: 2,500 mm, mount diameter: 50 mm, total height: 5,000 mm, total width: 6,000 mm, total length: 7,000 mm, type of input current: AC, workpiece weight (max.): 10,000 kg, overall weight: 35,000 kg, distance table to spindle center: 1,200 mm, quill travel distance: 500 mm, quill diameter: 130 mm, year of last overhaul: 2013, input voltage: 400 V, spindle motor power: 35,000 W, Compact portal milling machine with pivoting spindle head in very good condition, CNC HDH 426. Guodpfx Adoz Ar T Ejteg

Condition: used, bottom outlet NW 50 pressure gauge with outlet Optional: various fittings Gusdpsz Ar Txjfx Adtsg

Condition: used, Year of construction: 2003, machine/vehicle number: RRB338000, Machine: Bertolaso Sigma 105 5er Schraubverschließer Sigma 105 Gujdpfx Aez Ar Trsdtsg

Condition: used, Year of construction: 1992, In- and outlet on the right side set to 28 MCA 6 heads Capacity: about 10.000 bph amount of capping heads: 6 capacity / hour ca.: 10000 working direction: rotating turret Drive: Treibriemen / variabel Godpjz Ar Tljfx Adtjug

Condition: used, Year of construction: 1994, Deckel FP4 MA Universal Milling Machine Universal Milling Machine Deckel Godpfx Adoz Ar Tfjtoug Type/Model FP4 MA Condition Used Year of Manufacture 1994 Technical Data Travel in X / Y / Z axis 485 x 385 x 380 mm Quill stroke approx. 70 mm (manual) Table surface 460 x 800 mm Spindle speed 50 to 3,150 rpm Tool holder SK 40 Operating voltage 3-phase 380 V 50/60 Hz Feed rate 2 to 1,000 mm/min Continuously adjustable Rapid traverse 2 m/min Machine weight approx. 1,850 kg Feature - Deckel Dialog / Contour control Inquiry item: Transportation costs in a separate quote.

Condition: good (used), Year of construction: 2022, operating hours: 8,555 h, load capacity: 1,600 kg, lifting height: 11,000 mm, fuel type: electric, mast type: triplex, construction height: 4,300 mm, with camera Guodpsz Ar S Ijfx Adtog

Condition: used, Year of construction: 1997, machine/vehicle number: 800.167, Capsule type: champagne cap applicator, champagne cap folding capacity / hour ca.: 8000 working direction: rotating turret Working type: fullautomatic Guedpfxez Ar Szj Adtog amount of capping heads: 8 electrical power supply kW: 5