Enp Reparaciones Y Mantenimiento S.c.p

Year of construction: 2009, condition: used, Technical Data Processing Length max. [mm] : 7,200 Dimensions [mm] : 9,000 x 2,000 x 2,700 Nwodpfjynir Dox Afcsc Weigh PBX AL [kg] : 3,500 Pneumatic Operation Pressure [bar] : 6 Positioning Accuracy [mm/1000mm] : ± 0.1 mm Rotation Angle A axis max. [°] : 180 Capacity Work Spindle [KW] : 7.5 at 12.000 min-1 Speed Work Spindle max. [min-1] : 24,000 Tools: Tool Length max. [mm] : 160 Tool Ø up to max. Length max. [mm] : 50 at max. Length max. [mm] : 120 Tool Holding Fixture : SK 30 Electrical Connection : Nominal Voltage/Frequency [V/Hz] : 400/50 Number of Phases/Zero Conductors/Earth Conductors : 3/N/PE Nominal Current Consumption [A] : 35

Year of construction: 2008, condition: used, Technical data: The ISOMAT 5 machine is solely intended for fabricating complete profiles by pressing two half profiles from SCHÜCO’s profile systems together. Njdpeynf N Sjfx Afcswc ISOMAT 5 (Art. No.: 299 563) Electricity Supply: 380 V, 50 Hz Consumption: 1.1 kW

Condition: used, Cutter diameter 250 mm Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg Nsdpfxsynafzo Afcowc

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Milling area as per stop and template 340 x 100 mm Stroke 110 mm Nwedpfx Aoymr Ifefcoc Lower milling unit: Milling area as per stop and template 240 x 85 mm Front stroke 95 mm Rear stroke 45 mm Milling spindle speed 12,000 rpm Profile clamping range 115 x 100 mm Electric connection 230/400 V, 3~, 50 Hz Output per motor 0.74 kW Compressed air connection 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2338, travel distance X-axis: 6,700 mm, travel distance Y-axis: 2,090 mm, travel distance Z-axis: 70 mm, table width: 2,160 mm, table height: 915 mm, table length: 7,340 mm, TECHNICAL DETAILS Njdsylk Hdopfx Afcewc X-axis travel: 6,700 mm Y-axis travel: 2,090 mm Z-axis travel: 70 mm Main drive: 1 x HSD Main drive power: 6.6 kW / 8.9 HP Max. main spindle speed: 24,000 rpm Secondary drives: 2 x ELTE Secondary drive power: 3.7 kW / 5 HP Max. secondary spindle speed: 24,000 rpm Table width: 2,160 mm Table length: 7,340 mm Table height: 915 mm Number of milling heads: 3 EQUIPMENT Vacuum pump: BUSCH MINK Manuals Integrated software

Year of construction: 2006, condition: used, Rotox bar processing automaton type SBA 485 Njdpfx Afeyliq Uecswc

Condition: used, Rotox corner processing machine Nwedpfx Ajylipkefcoc

Condition: repair required (used), Year of construction: 2007, functionality: not functional, overall weight: 3,700 kg, input voltage: 400 V, type of input current: three-phase, We offer this used Tekna TK427/6 horizontal machining center, year of construction 2007. Model: TK427/6 Serial number: 320 Year of construction: 2007 Weight: 3700 kg Power: 11.5 kW Frequency: 50 Hz Voltage: 400-3 V Air pressure: 6-7 bar Nwjdsyk El Sjpfx Afcjc Automatic tool change and measure. 4 axis. Machine doesnt run due to malfunctioning drives. Machine ran 2 month ago. We can help with loading for transport. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2005, machine/vehicle number: 05-009-00007, Offer 25446 Technical Data: - Steel – Stainless Steel – Aluminium – Plastic, machining - Deburring and beveling process performed with a milling cutter - Plan milling head with indexable inserts Nwedjykn Trspfx Afcoc - Motorized feed module - Material thickness up to 100 mm - Bevel angle adjustment: 25 / 50 + 30 / 60° - Bevel width adjustable up to 20 mm - Infinitely variable speed adjustment: 2000 – 6000 rpm - Infinitely variable feed rate - Table size: 750 x 400 mm - Drive: 400 V / 5.2 kW - Space requirements approx. W 800 x D 1500 x H 1700 mm - Weight approx. 500 kg

Year of construction: 2006, operating hours: 7,000 h, condition: excellent (used), functionality: fully functional, X-axis travel (longitudinal axis) mm 7280 Y-axis travel (transverse axis) mm 525 Z-axis travel (vertical axis) mm 380 A-axis rotation (spindle rotation) mm from 0° to 180° continuous Maximum positioning speed X-axis m/min 80 Maximum positioning speed Y-axis m/min 60 Maximum positioning speed Z-axis m/min 30 Maximum A-axis positioning speed From 0° to 90° in 1" Electrospindle power kW 7 Electrospindle speed rpm variable up to 20,000 Tool holder taper HSK-40E Tool magazine capacity qty. 8 Number of clamps qty. 8 Automatic clamp positioning Installed power kW 16 Residual-current circuit breaker on main line A 0.3 Weight t 4.8 Operating pressure bar 6 ÷ 8 Nwodpfxeyi Umps Afcjc

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: C 113995, Technical data: Main spindle motor power 7.5 kW Nedsyifaqopfx Afcswc 8-position tool magazine

Condition: excellent (used), Year of construction: 2011, The machine in a very good condition. 7,6 meters long, 2 working places. Possible to give a warranty up to 6 month. Nwedpfoyia Ezox Afcoc

Condition: new, Year of construction: 2026, Cost-effective four-axis profile machining center (X, Y, Z + I - rotary table axis) for automatic three-sided machining of profiles made from aluminum, non-ferrous metals, plastics, and steel up to 3 mm wall thickness – brand new. CNC control system based on Windows® with 3D color graphics and simultaneous machining capabilities. Maximum machining length: 3,000 mm Maximum clampable profile length: 3,700 mm Machining of longer profiles possible Maximum profile cross-section: 200 x 180 mm Milling spindle drive power: 4.5 kW (optional 8 kW) Tool holder: SK30 (optional HSK40 / HSK63) Milling spindle speed: 120 to 24,000 rpm Space requirements including mobile control panel and rear safety fence: approx. 5.5 m x 3.1 m x H 2 m Weight: approx. 1,500 kg - Covered tool magazine for six tools - Automatic tool length measurement - Automatic front door - Rear workspace safety with protective fence and access door Nodoyhzirspfx Afcewc - 6 pneumatic clamping bridges - 2 longitudinal stops (left and right) - CNC control system based on Windows® with 3D color graphics and simultaneous machining

Year of construction: 2009, operating hours: 5,387 h, condition: ready for operation (used), functionality: fully functional, overall weight: 12,000 kg, total length: 15,000 mm, rotational speed (max.): 24,000 rpm, working length: 7,500 mm, Functions: Sawing, notching, milling, drilling, thread tapping, lock case machining TECHNICAL DETAILS Number of controlled NC axes: 14 Machining length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions (milling cutter/drill, max. diameter/length): Ø 50 mm / 200 mm Tool dimensions (disc milling cutter, max. diameter): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of tool magazine slots: 16 Number of special tool slots: 2 Nwjdpfoyhf R Nox Afcoc Automatic clamping jaw positioning: Yes Number of clamping jaws: 8 Profile system with quick-change system: Yes Machining features Max. cross-section WxH / length for single bar machining: 400 x 300 mm / 7,500 mm Min. cross-section WxH / length for single bar machining: 30 x 30 mm / 300 mm Movement: Tool Max. number of profiles per machine loading: Up to 8 profiles (depending on individual bar length) Number of fixed profile stops: 2 Automatic clamping jaw relocation during 2 machining steps: Yes Steel processing (up to 5 mm wall thickness): Yes Electronics / Software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows®, menu-driven: Yes Custom programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (machining visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t Operating hours: 20,616 h Spindle hours: 5,387 h

Year of construction: 2005, condition: used, CNC Machining Center Elumatec SBZ 122, year of manufacture 2005, designed for machining aluminum profiles for windows, curtain walls, and light metalwork. This is a robust and reliable industrial machine, highly regarded for its machining precision and operational continuity. Main features: - 3-axis CNC machining center - High-rigidity steel frame Nwsdpfx Aeyg Ht Aofcsc - Vertical spindle for milling, drilling, and complex operations - Worktable with pneumatic vices for stable and precise clamping - Long-travel longitudinal axis, ideal for processing profiles of considerable length - Protective enclosure with chip conveyor - Elumatec CNC control unit - Ideal for medium to high production and repetitive operations Applications: - Milling - Drilling - Slotting - End and face machining - Production of aluminum frames and special profiles Key data: - Manufacturer: Elumatec - Model: SBZ 122 - Year of manufacture: 2005 - Condition: Used Condition: - Machine in good overall condition - Coming from an industrial environment - Can be seen in operation by appointment Included equipment: - Complete workbench - Pneumatic clamping system - Control panel - Original covers and safety guards

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 6,450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotational speed (max.): 6,000 rpm, tool diameter: 80 mm, TECHNICAL DETAILS X-axis travel: 6,450 mm Y-axis travel: 400 mm Z-axis travel: 380 mm Machining length: 6,500 mm Number of tools: 8 pcs. Tool holder: BT30 Tool change time: 1.2 s Maximum tool diameter: 80 mm Spindle speed: 6,000 rpm Nwedpsyg D A Isfx Afcsc Feed rate X: 34 m/min Feed rate Y+Z: 18 m/min MACHINE DETAILS Total power requirement: 8.5 kW Dimensions & Weight Dimensions: 9,800 x 3,000 x 2,400/3,300 mm Weight: 5,400 kg

Year of construction: 2008, condition: used, functionality: fully functional, Three-axis interpolated CNC machining center with angular head accessory (enabling 4-axis machining), model Phantomatic T3 A. Specifically designed for comprehensive processing of aluminum, PVC, and light alloy profiles. Renowned for its historical reliability, precision, and sturdiness, this machine is ideally suited for window and door fabrication workshops as well as light metal carpentry applications. Structure and Configuration • Monoblock, fully enclosed frame with extensive perimeter protections • Completely enclosed working area with safety panels • Extended worktable with multiple pneumatic clamps for secure profile holding • Heavy-duty linear guides and kinematics, engineered for continuous operation • Prepared for machining of longer profiles Machining Unit • High-performance vertical spindle suitable for: o Milling o Drilling o Tapping o Slotting and contoured machining • Tool holding stations in view, including: o Milling head attachments o Drilling tools o Saw blade group (as shown in photos) • Manual tool change with current tool set included Controls and Commands • Emmegi operator console featuring: o Integrated monitor o Physical control keypad o Safety selectors o Emergency stop button • Ergonomic operator station with work surface • User-friendly, proven control system—suitable even for less experienced operators Included Equipment (as pictured) • Tool and toolholder set • Accessory case with: o Service wrenches o Clamping devices o Support equipment • Full set of guards and safety covers • Integrated electrical system on board the machine Applications • Aluminum and PVC windows and doors • Lightweight façades • Industrial profiles • Light metal fabrication • Precision machining of extruded profiles Machine Condition • Used machine • Overall condition: good • Source: production workshop Nedpsygumdjfx Afcowc • Dismantled / ready for loading (see photos) • Normal wear consistent with age

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: G123379, Machining center, fully functional, well-maintained, ready for immediate collection. Nwedpfx Afsygh Etscec

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Type: AKF 250 Motor: 400V 2.2kW Speed: 2800 rpm Cutter diameter: 250 mm Cutter arbor diameter: 40 mm Nwedpfx Afjygdf Ascoc Milling width: 300 mm Milling depth: 85 mm Profile height: 160 mm Weight: approx. 150 kg Dimensions (W x H x D): 950 x 1450 x 930 mm

Condition: like new (used), Year of construction: 2023, operating hours: 2,878 h, functionality: fully functional, We are offering this MECAL MC 304 Ariel – 5 MDT in almost new condition, year of construction 2023. Manufacturer: MECAL Model: MC 304 Ariel – 5 MDT Year of manufacture: 2023 The Mecal MC 304 Ariel-5 is a state-of-the-art 5-axis CNC machining center, perfectly suited for companies in the metalworking and construction industries. It is designed for high-speed machining of various materials such as brass, steel, aluminum, and PVC. Technical specifications Weight (kg): 6500 RPM: 20000 Width (mm): 2500 Nwjdpfx Afsyft Iqjcsc Height (mm): 2650 Length (mm): 11800 X-axis travel (mm): 9500 Y-axis travel (mm): 1400 Z-axis travel (mm): 700 C-axis travel (mm): 22 A-axis rotation (deg): 120 Tool magazine: 12 Motor power (kW): 11 Max. blade diameter: 400 Cooling type: Coolant fluid Spindle interface type: HSK-F63 If you have any questions or would like more information, please feel free to send us a message or call us.

Year of construction: 2024, condition: as good as new (ex-display), XX100329 FMC 120 - CNC machining centre 1x PR204851 5-position automatic tool magazine (ISO 30) Nedpfx Afsyfg Uwocowc 1x PR-28965 Rotation of the work table to intermediate angles with manual stop 1x ZP714617 Custom 2D milling module FST CAM 4 1x PR-27602 TOOL SET ALUMINIUM TYPE 1 1x PR207680 4 motorized clamps – 2 pneumatic stops

Year of construction: 2013, condition: used, 3-Axis CNC Machining Center Elumatec SBZ 608, ideal for automated processing of aluminum and PVC profiles for windows, doors, and façades. The machine is engineered to perform precise and repeatable milling, drilling, tapping, and hardware slotting operations. The machine is robust, reliable, and suitable for medium to high production volumes, already equipped with integrated loading/unloading systems and roller conveyors. Main Features - 3-axis interpolated CNC machining center - Complete profile machining: milling, drilling, tapping, and slotting - Heavy-duty industrial frame for maximum stability Nwedsydly Aepfx Afcjc - Worktable with pneumatic clamping systems - Automatic profile positioning system - Infeed and outfeed conveyors - Safety enclosure with protective devices - Elumatec CNC control - Integrated pneumatic system Key Technical Data - Power supply: 3/N/PE – 400 V - Frequency: 50 Hz - Installed power: 15 kW - Rated current: 21 A - Year: 10/2013 - Manufacturer: Elumatec GmbH – Germany Condition - Operative and in good working order - Regularly used in a production environment - Routine maintenance performed - Available for inspection by appointment Supply includes - Elumatec SBZ 608 machining center - Infeed and outfeed roller conveyors - Safety enclosure - Electrical cabinet and CNC unit - Technical documentation (if available) Applications - Aluminum window and door profiles - PVC window and door profiles - Curtain walls - Industrial profiles

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 9,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 630 mm, spindle speed (max.): 24,000 rpm, machine/vehicle number: 031809, TECHNICAL DETAILS X-axis travel: 9,500 mm Y-axis travel: 1,000 mm Z-axis travel: 630 mm Feed rate X-axis: 70 m/min Nwsdpfx Aoycul Sefcsc Feed rate Y-axis: 40 m/min Feed rate Z-axis: 40 m/min Swivel angle A-axis: ±110°, freely programmable in 0.1° increments Swivel angle C-axis: ±182°, freely programmable in 0.1° increments Spindle speed: max. 24,000 rpm Spindle power: 15 kW S1 Maximum milling cutter diameter: 100 mm Maximum disc milling cutter diameter: 100 mm Maximum saw blade diameter: 400 mm Tool holder: HSK-63F MACHINE DETAILS Compressed air connection: 7 bar Electrical connection: 400 V, 3~, 50 Hz, 80 A Air consumption: approx. 200 l/min with misting EQUIPMENT Machining operations: milling, drilling, tapping, thread milling, notching, and sawing with stationary profile bar 6-sided machining: front optional, underside possible Profile protection: machining with stationary profile bar Robust, low-wear direct drives on all axes Axes: 5-axis CNC control for complex 3D machining Display: 15-inch colour monitor Interfaces: USB ports, network connection 2-layer machining for pendulum operation Associated tooling (HSK tool holders) Two circular saws for aluminium Note: Documentation for disassembly of the machine is included.

Year of construction: 2017, condition: like new (used), functionality: fully functional, Single-spindle copy milling machine with manual operation and pneumatic locking. Head milling movement via indirect lever. Enables continuous machining without rotating the workpiece and processing of steel up to 2 mm. Scratch-resistant worktable. Manual tracer stylus. Deflection Lever for Head Movement: Manual movement of the tool in the horizontal plane is implemented via a lever to reduce operator effort. The handle height is adjustable for practical and ergonomic usage. Control Joystick: The lever enables vertical travel of the milling unit. The hand lever integrates the motor start button. The milling spindle is equipped with a tool holder featuring an ISO 30 quick-release coupling; four storage slots for tool holders are located on the side of the machine. Stops and Roller Conveyors: Roller conveyors on both right and left sides facilitate the machining of very long profiles. A system of hand-adjustable stops, also fitted on both sides, ensures correct positioning of the workpiece in the machine and brings it into the working area. Stylus with 4 Diameters: The mechanical tracer has four selectable positions, each corresponding to a different tool diameter. It is set onto the pre-chosen template, guaranteeing precise and safe machining. Nedpfxoycgvio Afcowc Clamping Devices: The machine is equipped with manually adjustable horizontal pneumatic clamps that ensure secure and correct fixation of the profile on the machine.

Year of construction: 2009, operating hours: 5,387 h, condition: ready for operation (used), functionality: fully functional, overall weight: 12,000 kg, total length: 15,000 mm, rotational speed (max.): 24,000 rpm, working length: 7,500 mm, Functions: Sawing, notching, milling, drilling, thread tapping, lock case machining TECHNICAL DETAILS Number of controlled NC axes: 14 Machining length: 7,500 mm Max. traverse speed X / Y / Z: 60 / 60 / 30 m/min A-axis rotation: ±110°, continuous C-axis rotation: ±220°, continuous Tool holder: HSK-63F Tool dimensions (milling cutter/drill, max. diameter/length): Ø 50 mm / 200 mm Tool dimensions (disc milling cutter, max. diameter): Ø 500 mm Speed range: 1 - 24,000 rpm Milling motor power: 16 kW Number of tool magazine slots: 16 Number of special tool slots: 2 Automatic clamping jaw positioning: Yes Number of clamping jaws: 8 Profile system with quick-change system: Yes Machining features Max. cross-section WxH / length for single bar machining: 400 x 300 mm / 7,500 mm Min. cross-section WxH / length for single bar machining: 30 x 30 mm / 300 mm Movement: Tool Max. number of profiles per machine loading: Up to 8 profiles (depending on individual bar length) Nwjdpfx Asx U Thkefcoc Number of fixed profile stops: 2 Automatic clamping jaw relocation during 2 machining steps: Yes Steel processing (up to 5 mm wall thickness): Yes Electronics / Software equipment Machine PC processor: Yes Control panel with display and keyboard: 19" touch TFT color display Machine operation based on Windows®, menu-driven: Yes Custom programming without NC/CNC knowledge: Yes Schüco CAM installable on office PC (machining visualization): Yes MACHINE DETAILS Dimensions: 15 x 4 x 5.5 m Weight: 12 t Operating hours: 20,616 h Spindle hours: 5,387 h