Konti Hidroplast DOOEL

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 27 mm, Warehouse – No. 2875 1 used compounding and granulation line, partially overhauled in 2026 and functionally tested, consisting of: Brabender gravimetric 2-component dosing system (expandable, optional at extra cost) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 stand-alone control Twin-screw extruder Leistritz type ZSE 27 HP Co-rotating, self-cleaning, segmented screws and cylinder with intensive cooling. Screws 2x Ø 27 mm - 36 L/D with 8 cylinder zones with 3 degassing zones, 1 vacuum pump 1.5 kW Screw speed up to 1,200 rpm - adjustable Extruder drive 33.8 kW - heating power 9.8 kW installed Melt pressure sensor Control system Macromatex III MAAG Gala underwater granulation system type LPU, model SLC 5, including: Polymer start-up valve with hydraulics Die plate 20°, granulator SLC 5 with 1.5 kW drive Water box – temperature-controlled water system with Granulate centrifugal dryer type 1150, 1.5 kW drive Xantec control system Siemens Hsdsz A Sxlspfx Ac Ajnt Accessories: Single tempering unit for the extruder processing section The system is ready for demonstration; a test run / sample production with your material is possible on short notice. Details and dates upon request. We have other compounding extruders available ex-works: Alphatec, Coperion, Leistritz, Berstorff-Krauss Maffei, as well as all accessories: granulation systems (BKG - MAAG gala, Sikoplast, IPS, Scheer, ...), melt filters (BKG, Ettlinger, Alphatec, ...). Commissioning / training for all our systems can be carried out by our technicians; details upon request.

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 65 mm, Stock No. 2845 1 used, overhauled, and functionally tested compounding and granulation line, ADS-STS Coperion 65 – Throughput up to approx. 400 kg/h – Material-dependent, consisting of: Volumetric material dosing twin-screw extruder, 2 x Ø 50 mm, drive 1.1 kW Twin-screw extruder / compounder – Co-rotating Screws 2x Ø 65 mm – 40 L/D, segmented screws and cylinder (water-cooled) Screw speed up to 600 rpm, extruder drive 90 kW – AC adjustable 2x degassing zones, 1x with vacuum pump 1.5 kW and condensate separator 1x side-fed twin-screw extruder ZSB, 2x Ø 35 mm, drive 0.75 kW Screen changer, screen area 125x70 mm with hydraulics 1.5 kW Die head with flanged connection, holes 13 x Ø 3.2 mm Strand cooling tank, stainless steel, L 4000 mm x W 350 mm Strand granulator SG 100, drive 3 kW Control cabinet with relay control, ABB frequency inverter. Gravimetric dosing system OPTIONAL, available at an extra charge. Test run with your material possible in the short term, appointment by arrangement at our Wuppertal plant. We have other compounding lines and accessories in stock and ready for delivery. Hnsdpjz A R R Hofx Ac Ast

Condition: like new (used), functionality: fully functional, Year of construction: 2015, operating hours: 1,608 h, screw conveyor diameter: 50 mm, Krauss Maffei KMD-50K in very good condition for sale. This extruder comes from the first owner and was used in a technical laboratory – original 1608 operating hours! Delivery includes documentation, hopper, and adapter. An inspection while the machine is powered on can be arranged at any time. Technical specifications: - Model: Krauss Maffei KMD-50 K - Year of manufacture: 2006 - Operating hours: 1608 - Weight: 1800 kg - Standard profile screw - Closed screw temperature control Loading via forklift. Hnodpfxsz A Rvvo Ac Aet Delivery, export documents, or training can be arranged upon request. Please feel free to contact us if you have any questions.

Condition: used, functionality: fully functional, Year of construction: 2018, screw conveyor diameter: 52 mm, Krauss Maffei Berstoff ZE 52-48D Twin Screw Extruder (2018) comprising Krauss Maffei Berstoff ZE 52-48D Twin Screw Extruder with 2x 52.2 mm diameter screws 48:1 L/D ratio, co-rotating 12-barrel housing section, electrically heated and water-cooled Hnedpfx Aoz Atiujc Ajt Side feeder 1200rpm max.imum screw speed 350kW motor with Eisenbeiss ZE-042.5-16.0 gearbox

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1997, Haul-Off, used Manufacturer: Blake Kunststoffproduktionsanlagen Type: 303-1600-270 Hnodpez Ark Rofx Ac Ast Year of manufacture: 1997 Pulling force: approx. 40,000 N Tread width: 300 mm Passage width: max. 500 mm Passage height: appr. max. 200 mm Effective contact length: 2400 mm Haul-off speed: stage 1: 0,5 - 4,0 m/min., stage 2: 1,0 - 8.0 m/min. Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic, at the front and back Dimensions: 4000 x 1200 x 2300 mm (LxWxH) Weight: approx. 3000 kg Condition: recondition and checked for function

Condition: good (used), Extrusion tool accessories, extruders, spinning plate filters, filter belts Hsdpfx Acsz Apb Hj Aont -Spinning plate filter: Filter belt for spinning plate extruder/melt filter, bag of 5 pieces -Size: 1736 × 22 mm -Fineness/count of meshes: 60–250–100 mesh -Number: 20 bags available -Price: per bag -Transport dimensions: 250/60/H20 mm -Weight: 0.3 kg/bag

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 4977, screw conveyor diameter: 60 mm, Leistritz ZSE 60 max.X-44D Extruder (2018) comprising Leistritz ZSE 60 max.X-44D twin-screw extruder with 2x 60 mm diameter screws 40:1 L/D ratio, co-rotating 10-barrel housing section, electrically heated and water-cooled 2 degassing ports 1200rpm max.imum screw speed Hsdpfx Acjz Akmqe Ajnt Motor with Flender direct-driven gearbox

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 13,863 h, screw conveyor diameter: 90 mm, screw conveyor length: 2,880 mm, Krauss Maffei twin-screw extruder KMD90-32 in very good condition for sale. The extruder comes from a technical center and has seen little use. These are the original operating hours (13,863) from the first owner. An inspection with a test run is possible at any time. Technical data: - Year of manufacture 2004 - Original operating hours: 13,863 - Standard screw profile with up to 390 kg output per hour Hodpfxoz Ag Ude Ac Ajnt - C4 control system - Internal screw temperature control, welded screw tips - Including hopper, adapter, sensors, etc. - Screws and cylinder are in new condition. The screws have been removed and can be inspected on-site. Loading with a forklift. Delivery, export documents or sea packaging available upon request.

Condition: like new (used), functionality: fully functional, Year of construction: 2015, operating hours: 1,870 h, screw conveyor diameter: 63 mm, Krauss Maffei KMD-63K extruder in very good condition for sale. The machine comes from a technical center and has only 1,870 original operating hours! All functions are in working order. An inspection with a test run without material is possible at any time. Technical data: Hodsz Ag Tgspfx Ac Asnt - Year of manufacture: 2015 - Operating hours: 1,870 - C5 control system - Twin-screw, single-conical design - Closed screw cooling system - Standard profile screw - Motor power: 38.3 kW - Weight: 2,700 kg Delivery includes all documents, hoppers, and adapters. Loading with a forklift. Delivery is possible by arrangement. Export documents and sea packaging are also available. Please do not hesitate to contact us with any questions.

Condition: new, Year of construction: 2018, New R&B Plastics Machinery MAX 5-Extruder System Heavy-duty, purpose-engineered multi-extruder system manufactured by R&B Plastics Machinery, consisting of four MAX 1-1/4" × 30:1 extruders mounted over one MAX 2" × 24:1 main extruder, complete with specialty mounting structure, material loaders, heated adapters/hoses and centralized Allen-Bradley PLC controls. The system was fully assembled, integrated, inspected and pre-shipment tested at R&B's Saline, Michigan facility and has never been placed into production. Extruders (4) R&B MAX 1-1/4" × 30:1 X102 or equivalent bimetallic barrel liners Interchangeable standard-output screws Rossi gearboxes with high-temperature Viton seals 5 HP Marathon AC motors Four heat/cool barrel zones Heaters, high-speed blowers & dual thermocouples Rupture discs & pressure transducers Watlow melt-temperature probes & mica band heaters Stainless-steel hoppers Adjustable 45° feed-throat/carrier assemblies (1) R&B MAX 2" × 24:1 Main Extruder Non-vented, air-cooled configuration MAX IMPACT high-output screw Colmonoy 56 flight lands X102 or equivalent bimetallic-lined barrel 25-30 HP Marathon Blue Max TEFC motor Rossi helical gear reducer Maximum screw speed: 100 RPM Three individually controlled heat/cool zones Melt-temperature & pressure transducers Stainless-steel hopper and water-cooled feed section Multi-Extruder Mounting System Engineered for 4 × 1-1/4" extruders over 1 × 2" main extruder Heavy-duty welded mounting frame Individual adjustment posts & safety stops Specialty extended main base Material Handling & Transfer (5) Foremost B-6-2 self-contained vacuum loaders (4) R&B heated adapter assemblies (4) heated hose assemblies, up to 12 ft R&B MAX PLC Control System Allen-Bradley CompactLogix PLC 15" Allen-Bradley operator control screen (4) 5 HP + (1) 25-30 HP Allen-Bradley VFDs PLC-controlled extruder heating/cooling Air-conditioned main electrical cabinet EWON remote-access system Integrated wire trays and electrical distribution Designed for 380 V / 3 Phase / 50 Hz Open-architecture electrical drawings, machine logic and documentation Condition: NEW / Never Used Hnedpfx Aszz Thbsc Aet Complete documentation and operating manuals available. Important Scope Information Profile/die tooling and water bath are not included. Proprietary zipper/profile tooling and associated proprietary components are not included. The control cabinet contains provisions for additional downstream equipment, including water-bath and winder connections; these provisions should not be interpreted as inclusion of that downstream equipment in this R&B system listing. Equipment is stored and ready for shipment. Inspection available.

Year of construction: 2025, condition: excellent (used), functionality: fully functional, Equipment: CE marking, Excellent, high-quality twin-screw compounding line. Fully equipped and suitable for the production of food, bio-based, and synthetic polymer compounds. Hnjdpfxozzni Hs Ac Ast Two side feeders with weighing scales, Siemens control PLC system. Output: 250-350 kg/h, depending on the raw material. Main motor: 90 kW. PLA, PHA, PP, PET, PA, ABS, and all other polymers. The equipment is in very good condition and has been used very little.

Condition: used, functionality: fully functional, power: 650 kW (883.75 HP), total length: 48,000 mm, total width: 8,720 mm, total height: 6,464 mm, Year of construction: 2019, HIGH-CAPACITY 3-LAYER CO-EXTRUSION FLAT SHEET LINE (2100 mm) Manufacturer: FONG KEE INTERNATIONAL MACHINERY CO., LTD. (Taiwan) Model: TSE-90/150/150-2400 Year of Manufacture: 2019 Condition: Used – Excellent condition, fully assembled and preserved indoors. KEY SPECIFICATIONS & PERFORMANCE: • Finished Sheet Width: Up to 2,100 mm (Net trimmed width) • Die Lip Width: 2,300 mm • Output Capacity: Up to 1,000 kg/h (depending on resin and sheet thickness) • Processable Materials: PET, PMMA, ABS, PS (HIPS / GPPS), PC, PP • Polymer Versatility: Configured for engineering thermoplastics and polyolefins (PET, PMMA, ABS, PS, PC, PP sheet extrusion). CO-EXTRUSION & FEED SYSTEM: • Configuration: 3-Layer Co-Extrusion (A/B/A or A/B/C) • Extruders: - Extruder A: Ø 90 mm - Extruder B: Ø 150 mm - Extruder C: Ø 150 mm • Melt Delivery: MAAG Gear Melt Pumps with Dynisco pressure transducers for ultra-stable flow Hedpozzdnfofx Ac Asnt • Extrusion Die: EDI (Nordson) Ultraflex HRC100-FB (2,300 mm, Made in USA) with Fast Gap patent adjustment CALENDER & DOWNSTREAM PROCESSING: • Polishing Stack: 3-Roll horizontal calender with high-precision mirror-finished rolls • Additional Roll Included: Dedicated Matte Calender Roll included with the line • Surface Finish Capabilities: Both High-Gloss / Mirror Optical Grade and Anti-Glare / Matte Finish • Temperature Control: Multi-zone thermoregulation units (TCU) • Protection: In-line dual-side protective masking film application unit • Cutting & Stacking: High-speed automated cross-cutter and automatic sheet stacker unit • Winding: In-line heavy-duty rewinder unit ELECTRICAL, DRIVES & AUTOMATION: • PLC System: Siemens SIMATIC (ET 200SP) with intuitive touchscreen HMI • Frequency Inverters: Siemens Sinamics G120 drive system • Main Electrical Switchgear: Schneider Electric • Cabinets: Independent air-conditioned industrial electrical enclosures FACILITY & FOOTPRINT: • Total Line Length: Approx. 48.0 m • Total Line Width: Approx. 8.7 m • Connected Drive Power: Approx. 650 kW (988 A) • Layout Drawing: Full technical CAD layout available upon request. CURRENT STATUS & INSPECTION: • Condition: Fully assembled, idle, and preserved indoors within a controlled industrial environment. • Availability: The complete line is immediately available for professional on-site visual inspection upon request. • Reason for Sale: Facility line reconfiguration.

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material Hnsdezylxiepfx Ac Ajt 1 Tonne per Hour

Year of construction: 2001, condition: good (used), Brand: Rollepaal B.V. Type: A-Rex 90-33 Type number: E309.0001 Screw: Single Screw diameter: 90 mm L/D ratio: 33 Hjdpfxszx Da Aj Ac Asnt Serial number: 230/400 Year of manufacture: 2001

Year of construction: 2023, operating hours: 200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 230608, 4. Main Extruder Type: Hnjdpfszxxifsx Ac Aet CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: DS70 086, total length: 3,500 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 3,000 kg, Parallel twin-screw extruder - Manufacturer: WEBER Hnsdpfozxr Uuex Ac Aet - Type: DS 7.22 - Year: 2006 - Parallel twin screw, ø70mm, 22LD - 5 heating zones on the cylinder + 2 cooling zones - Motor: 30kW - Up to 40 rpm - Up to 180kg/h - tube and 120kg/h - profile (depending on material and tooling)

Condition: like new (used), Year of construction: 2006, operating hours: 4,545 h, functionality: fully functional, screw diameter: 114 mm, overall weight: 7,500 kg, A KMD114-32 P in like-new condition is for sale. Hsdpfx Acozxhfis Aont This extruder comes from a technical institute and is therefore from a single owner. The operating hours are original and can be verified. The screw and cylinder are in like-new condition. The gearbox runs very smoothly. Includes adapter, hopper, and loading onto a truck. Technical specifications: - Year of manufacture: 2006 - Screw for profile: 684 2929 / 8880 - Internal screw temperature control, welded tips - Maximum screw speed = 17 min-1 - Maximum dosing speed = 260 min-1 - 5 cylinder zones, 15 tool zones + 4 lip heaters, melt temperature, melt pressure - C5 control system with puller control, language E/D An inspection in 84405 Dorfen is possible at any time. If you have any questions, please do not hesitate to contact us.

Year of construction: 2002, condition: good (used), functionality: fully functional, An ultra reliable 130 / 160mm OMP Prealpina plastics extruder, supplied by ourselves back in 2002. I have know the extruder history since new as i was the supplying agent originally. Originally supplied to reprocess confectionery Polypropylene films with 100% heavy print on the film , it performed very well in degassing and compounding the plastics materials till that contract expired. The extruder is a cascade version , allowing significant extra gas venting and polymer mixing, by utilizing a second short barrel 160mm extruder to deliver molten and clean plastic to a die face cutter, followed by a centrifuge to dry the pellet. The line has recently been fitted with an ultra efficient FIMIC fully automatic screen filter, providing probably the most efficient filtration available to plastics recyclers. being a cascade configuration , with superior filtration and venting , the line is most suitable for difficult plastics films or fibre recycling. The line has a 7 cu metre silo feeding directly into a force feed conical delivery system to the feed zone of the 130mm extruder. There is a master batch/ additive feeder included. The line was sold to a company in Lituania from its earlier owner in the UK in 2022 , but the plastic feedstock thought to be available in Lithuania never materialised. The line has been stored since, and is still dismantled and able to be shipped immediately to a new buyer. Hnjdpjzwhtdsfx Ac Aet

Year of construction: 2009, condition: used, Used Baker Perkins model MP24PH 40:1 L/D twin screw extruder. - Manufacturer: Baker Perkins - Model: MP24PH 40:1 L/D - Number of screw: Twin Screw Extruder - Rotations: co-rotating - Screw speed range: 0 - 600 rpm - Motor power: 11.2.5 kW, variable speed Hodpfx Acjzvn Daj Aent Barrel: - Maximum operationg temperature: 200°C - Nominal barrel lenght: 40:1 L/D - Barrel type: one piece horizontally split clamshell barrel - Heating: electrically heated via cartrige type heaters - Cooling: water-cooled via cored barrel backing block Includes: - Touch HMI integrated in switchboard - Single screw powder feeder - Liquid feed system - liquid hopper, gear pump and flow meter

Year of construction: 1998, operating hours: 64,082 h, condition: good (used), This Cincinnati extruder is currently in storage at Plastima Used Machinery. The machine was manufactured in 1998. Hnodpfxszu Nnqe Ac Ajt – Brand: Cincinnati – Model: Titan 45R-APC – Year of manufacture: 1998 – Conical twin-screw extruder – Screw diameter: 45 mm – Operating hours: 64,082

Condition: good (used), Year of construction: 1991, Brand: Hans Weber GmbH Model: DS 120 Year of manufacture: 1991 Screw diameter: 120 mm • One pair of original WEBER screws (in excellent condition, including measurement report) Hnedpfx Acjzu Nl As Aot • One pair of non-original screws • Gearbox inspected and partially overhauled by WEBER • Control system upgraded to WPS control • Output on PVC approximately 700 kg/hour

Year of construction: 1993, operating hours: 2,466 h, condition: used, Brand: Leistritz AG Model: Micro 27/40 D Screw type: Twin screw Year of manufacture: 1993 Hjdpfxjzu Nk Se Ac Aent Screw diameter: 27 mm L/D ratio: 40 Operating hours: 2,466

Year of construction: 1986, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 530, Industrial Double-Drum Winder W04 – Winding Machine For sale: industrial W04 winding machine designed for winding flexible plastic products, profiles, tubes, cords, strips, or similar continuously extruded materials. The machine was previously used in production as part of an extrusion line. Basic information: Machine type: industrial winding machine Hedpfjzu Nf Ajx Ac Asnt Designation: W04 Year of manufacture: 1986 Double-drum design Drum 1 / Stop / Drum 2 / Reset controls Emergency stop button Traverse mechanism for even material distribution Adjustable operation Electrical control cabinet IMO iSmart controller Lenze frequency inverter 24 V power supply Mounted on a mobile steel frame This is an older, robust industrial machine. The electrical system has been upgraded during its service life. Condition and equipment are shown in the photos. Suitable for further use in production, refurbishment, or as a base for a custom winding application. Location: Ivanka pri Nitre, Slovakia Price: €3,000 For further information or additional photos, please contact me via message.

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. Hedpfx Aszump Ejc Aont End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Year of construction: 2002, operating hours: 1,378 h, condition: good (used), Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Hsdpjzuk Tnsfx Ac Asnt Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials