Steindl

Condition: good (used), Year of construction: 2003, functionality: fully functional, spindle diameter: 40 mm, planing width: 230 mm, working height: 120 mm, rotational speed (max.): 6,000 rpm, Equipment: cabin, Types: Profimat 26, Machine no.: 100272, Year of manufacture: 2003, 5-spindle: U-L-R-O-U, Working width: 20-230 mm, Working height: 8-120 mm, with Ahtue Neumann feed unit Bljdpfx Ahsyq Ab Ro Ied

Condition: not inspected (used), Year of construction: 2010, functionality: unexamined, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, controller model: Siemens Simatic Panel Touch, workpiece length (max.): 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed speed: 12 m/min Rubber-coated feed rollers: 1 Toothed feed rollers: 4 Total number of rollers: 5 MACHINE DETAILS Control system: Siemens Simatic Panel Touch Processing unit 1 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 2 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Max. tool diameter: 4 mm Blodeyqx T Aspfx Ah Iod Processing unit 3 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 4 Motor power: 5.5 kW Shank diameter: 40 mm Shank length: 240 mm Automatic chip ejection power: 24 kW EQUIPMENT Safety standard: EC marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photo documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7243

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, planing height: 160 mm, spindle diameter: 40 mm, planing width: 260 mm, total height: 170 mm, spindle speed (max.): 6,000 rpm, compressed air connection: 8 bar, input voltage: 400 V, table length: 2,500 mm, number of spindles: 4, extraction connection diameter: 250 mm, power: 18 kW (24.47 HP), input frequency: 50 Hz, input current: 63 A, Weinig Cube 4-sided planing machine. Machine is in very good condition and very little used, like a new machine. Test run is possible in Lahti Finland. Year of manufacture: 2011 Weight: 2,100 kg Connection value: 400V 63Ah Air pressure: 8 bar Power: 18 kW (25 hp) Extraction connection: 250 mm x1 Max. planing width: 260 mm Max. planing height: 160 mm Minimum planing length: approx. 400 mm Infeed table length: 2,500 mm Bjdpfx Ahsyqww Ts Isld Incl. planing heads with knives.

Condition: excellent (used), functionality: fully functional, Four-sided planer Weinig Profimat 26 Fortec + EM11 Working width: 230 mm Working height: 130 mm Number of spindles: 5 Spindle arrangement: Bottom 5.5 kW Left Right 11 kW Top 7.5 kW Bottom 5.5 kW Material feeder: Weinig EM 11 Pneumatic pressure rollers divided into 3 sections Feed speed adjustable via frequency inverter: 5–24 m/min CE certificate Technical documentation Bjdpfxjyn Et Rj Ah Ield

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, overall weight: 2,500 kg, power of feed motor: 3,000 W, spindle speed (max.): 6,500 rpm, height adjustment type: electric, planer shaft diameter: 125 mm, workpiece height (max.): 170 mm, jointer table length: 2,000 mm, type of input current: three-phase, workpiece width (max.): 250 mm, number of spindles: 5, extraction connection diameter: 140 mm, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Profimat 26 super. For sale: four-sided planing machine Weinig with five heads as shown in the photo. Planing width: 240 mm, planing height: 170 mm. Four aluminum cutter heads included. Feed by cardan shaft, 5 to 35 m/min. Spindle diameter: 40 mm, 6,500 rpm. ATS electronic setting and programming. Full enclosure. Pneumatic pressure. Table lubrication system. Excellent condition. Year 2001. Bjdpfx Aeynwmcsh Ijld

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 92805, Planer profiling milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm Working height 8 - 120 mm Bodpfx Aheynl N Se Iold 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Bottom working spindle 5,5 kW / left + right 5.5 kW / top 5.5 kW / bottom finishing 5.5 kW Spindle speed 6000 rpm Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min lubricant pump mechanical digital displays Year of manufacture 2001 Dimensions 3400 x 1800 x 1900 mm (L x W x H), weight 2500 kg

Condition: excellent (used), CATALOG NUMBER 7909 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 130 mm - 6 spindles: 1) Bottom horizontal, 230 mm, 4 kW 2) Right vertical, 130 mm 3) Left vertical, 130 mm (spindles 2 & 3), 7.5 kW 4) Top horizontal, 230 mm, pneumatically adjustable front/rear, 5.5 kW, electrically adjustable up/down 5) Bottom horizontal, 230 mm, 4 kW 6) Trimming saw, pneumatically adjustable up/down, right/left, 2.2 kW - Saw blade diameter: 160 x 40 mm - All spindles adjustable up/down, right/left - All spindles equipped with electric brake - Spindle diameter: 40 mm - From above: 4 infeed traction rollers, gear-toothed including 2 double rollers - From above: 3 outfeed traction rollers, rubber, smooth, including 1 double roller - From below: rubber traction roller, double - Feed by Cardan shaft rollers - Rollers pneumatically pressed - Infinitely variable feed speed up to 25 m/min - Feed motor: 2.2 kW - Working pressure: 6-10 bar - Electric thickness adjustment - Central table lubrication - Infeed table length: 1980 mm - Extraction port diameter: 5 x 140 mm, 1 x 80 mm - Dimensions (L x W x H): 4000 x 1800 x 1700 mm - Weight approx. 3,500 kg Bedpeynktcofx Ah Isld ADVANTAGES – German-made, WEINIG brand – 5-head configuration – Operator’s manual (DTR documentation) – 6th spindle is a pneumatically adjustable trimming saw – Planer in ideal, very good condition Net price: 53,900 PLN Net price: 12,840 EUR Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of significant exchange rate fluctuations)

Condition: good (used), working width 180 mm working height 120 mm 1 lower spindle 3.7 kW 2 right spindle 3 kW Bodpfx Ahjyncgbj Iold 3 left spindle 3.7 kW 4 upper spindle 3.7 kW two feed speeds: 6 and 12 m/min

Condition: used, Year of construction: 2001, Storage location: Supplier Bedpfx Ahjym D Eij Ijld

Condition: like new (used), Year of construction: 2024, operating hours: 120 h, functionality: fully functional, planing height: 200 mm, spindle diameter: 50 mm, planing width: 260 mm, jointer table length: 2,500 mm, number of spindles: 5, Profile milling machine Superset NT V5 carpenter's version with 2 axes Equipment as per attachment Machine connected and ready for demonstration Availability: 1 to 2 weeks Blsdpfx Aoym A A Hsh Ied

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 108146, WEINIG U500 Industrial Wood Planer / Moulder – Year 2006 For sale: WEINIG U500 high-quality industrial woodworking machine, manufactured in 2006, suitable for professional wood processing operations. The machine is renowned for its precision, durability, and reliable performance in continuous production. Specifications: • Model: WEINIG U500 • Year: 2006 • Serial number: 108146 • Total installed power: 50 kW • Operating voltage: 3 × 400 V / 50 Hz • Control voltage: 230 V / 50 Hz • Nominal current: 111 A • Main fuse: 125 A Bedpfx Ahoymzdps Iold • Max motor current: 20.5 A Condition: • Industrial used condition • Robust German construction • Suitable for immediate operation (subject to installation and inspection) Ideal for: • Joinery workshops • Wood processing factories • Industrial moulding and planing applications

Condition: excellent (used), Year of construction: 2022, WADKIN M623S (6 SPINDLE) YEAR 2022 WIDTH 230MM HEIGHT 160MM ALL SPINDLES 6000 RPM ALL SPINDLES 40MM SHORT INFEED TABLE 1: BOTTOM 11 KW 2: RIGHT 11 KW 3: LEFT 11 KW 4: TOP 15 KW 5: TOP 15 KW 6: BOTTOM 11 KW 50 M/MIN+ ELECTRIC. FEED 7 x DRIVEN TOP FEED ROLLERS 3 x DRIVEN BED FEED ROLLERS Bledpfx Aheymyk Us Ijd ANTI-KICKBACK DEVICE AUTOM. BED LUBRICATION DIMENSION: APPR 3500 X 2000 X 1800 MM WEIGHT: APPR. 5500 KGS DUSTHOODS: 6 x 140 MM DIAMETER DUST MANIFOLD INCLUDED POSSIBLE TO SUPPLY WITH MOULDER INFEED AND DROP LEAF OUTFEED POSSIBLE TO SUPPLY TOOLING IF NEEDED

Condition: excellent (used), functionality: fully functional, Min./max. workpiece height: 15-100 mm Min./max. workpiece length: 500-2000 mm Min./max. workpiece width: 25-230 mm Bedpfx Asymn Rcoh Isld Feed speed: 5-36 m/min

Condition: excellent (used), Catalogue number 6393 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - Number of spindles: 4: 1) Bottom horizontal, 200 mm, 5.5 kW 2) Right vertical, 150 mm, 4 kW 3) Left vertical, 150 mm, 4 kW 4) Top horizontal, 200 mm, 5.5 kW - All cutterheads adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 feed-in traction rollers, toothed (including 2 double) - 1 feed-out traction roller, rubber-coated From below: - Feed-in drive roller, toothed, steering, integrated in lower table - 3 side pressure rollers - Feed-out traction roller, metal, smooth - All rollers pneumatically loaded - Infeed table length: 2,130 mm - Height-adjustable table - Centralized lubrication system - Electric adjustment of planing thickness - Lift motor: 1.1 kW - Stepless feed speed control via inverter - Feed drive motor: 3 kW - Feed via Cardan shafts - Fully enclosed in cabin - Extraction port diameters: 4 x 130 mm - Dimensions (LxWxH): 3,550 x 1,750 x 1,800 mm - Approx. weight: 3,000 kg ADVANTAGES Bjdpfx Ajymnqcjh Isld – Equipped with 4 cutterheads – Ideal for wet and dry timber – DTR operation and maintenance manual included – Used machine, very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, functionality: fully functional, SCM Sintex NTE Four-Sided Planer – only 200 operating hours Specification: • Condition: pre-owned, after professional inspection • Manufacturer: SCM • Model: Sintex NTE • Year of manufacture: 2011 • Operating hours: 200 mth • Working width: 180 mm • Working height: 120 mm • Vertical spindle motor: 5.5 kW (one motor for 2 heads) • Horizontal spindle motor: 9.0 kW (one motor for 2 heads) • Total power: 16 kW • Programmer for setting planing dimensions, with memory for 300 settings • Automatic head positioning based on entered dimensions • 4 spindles equipped with Tersa system knives • Feed rack before the first head • Infeed table: 230 cm length, 19.5 cm width • Manual lubrication pump for the table • Two working speeds (6 and 12 m/min) Bsdpjymlx Rofx Ah Ield • Sound-insulated cabin • Original paintwork • Weight: 996 kg • CE compliant • Documentation in Italian • Overall dimensions: 330 x 110 x 161 cm (L x W x H) Additional Information: • Machine is in very good technical condition, ready for immediate use • Actual machine condition shown in the attached photos • Possibility to power up and inspect the machine on site • Price listed does not include VAT or transport costs Financing and Transport: • We arrange transport with MDD fleet, courier companies, or third-party carriers • Financing support available in the form of leasing or lease loan

Condition: good (used), Weinig Hydromat H23 8 spindle 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Bodpfx Aheyl Rm Dj Isld Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing 7.5kW feed motor. Automatic lubrication system. Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: excellent (used), Year of construction: 2003, Weinig Hydromat 23C with 6 Spindles. Separate electrical panel. Automatic lubrication system for bedplates Maximum dimensions 140mm x 230mm No 1.  11kw - Bottom 6000rpm + Outboard bearing - straight jointer prepared No 2. 11kw - Right 6000rpm - straight and profile jointer prepared Blsdpfx Ajyl Rmwjh Ijd No 3. 11kw - Left 6000rpm - straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing - jointer prepared No 5 . 11kw - Top 6000rpm + Outboard bearing - straight jointer No 6 . 18.5kw - Bottom 6000rpm + Outboard bearing - straight jointer 7.5 kw feed. 6-60m/min (Possible to increase speed as needed). 50mm spindles Beam 0.55kW Full documentation included. Possible to supply with hydro tooling if needed. Possible to supply with infeed and outfeed if needed.

Condition: excellent (used), Weinig Hydromat 23C with 6 Spindles. Max width 245mm Bsdpfeyl Rmqex Ah Ield Max Thickness 160mm Separate electrical panel. Separate remote control panel Automatic lubrication system for bedplates Full heavy duty sound enclosure. 15kW feed motor 100m/min No 1.  7.5kw - Bottom 6000rpm straight jointer prepared No 2. 11kw - Right 6000rpm straight and profile jointer prepared No 3. 15kw - Left 6000rpm straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 5 . 30kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 6 . 15kw - Bottom 6000rpm + Outboard bearing + straight and profile jointer prepared 50mm spindles Beam 0.55kW Full documentation included. Heavy duty sound enclosure. Possible to supply with hydro tooling if needed. Possible to supply with full mechanisation if needed.

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor Automatic lubrication system. Electric digital display memory system. Bledsyl Rmkspfx Ah Isd Possible to supply with Weinig moulder infeed and outfeed

Condition: reconditioned (used), Leadermac Thundermac 923T Spindles: 9 x 50mm x 6000 rpm Bottom (22 kW) - Bsdpsyl Rmdsfx Ah Iold Right (15 kW) - Left (15 kW) - Right (15 kW) - Left (15 kW) - Top (22 kW) - Bottom (22 kW), Top (22 kW) - Bottom (22 kW). Working width: 250 mm, height: 160 mm. Max feed speed 100m/min (Possible to increase to 150m/min) Straight jointers. Profile jointers. Connection: 380 V / / 50 Hz 400 amps. Full Documentation included.

Condition: reconditioned (used), Year of construction: 2013, Leadermac Speedmac 631 Working width: 310 mm, height: 150 mm. Spindles: 6 x 50mm (4x spindles with inverter speed control Bottom (22 kW) - 6000 rpm outboard bearing Right (15 kW) - (4000 to 9000 rpm) straight jointer Left (15 kW) - (4000 to 9000 rpm) straight jointer Top (22 kW) - 6000 rpm, outboard bearing, Top (22 kW) - (4000 to 9000 rpm), outboard bearing, straight jointer Bottom (22 kW)- (4000 to 9000 rpm), outboard bearing, straight jointer Electronic spindle position adjustment as follows 1. 3rd spindle width adjustment. 2. 4th spindle thickness adjustment. 3. 5th spindle thickness adjustment. Feed speed 60m/min (Possible to increase). Top feed rollers 200mm (first 2) and 140mm others Connection: 380 V / / 50 Hz Full Documentation included. Bsdpfx Aeyl Rl Tsh Isld

Condition: excellent (used), Year of construction: 2015, WEINIG POWERMAT 1200 (6 SPINDLE) YEAR 2015 WIDTH 230MM HEIGHT 160MM ALL SPINDLES 8000 RPM ALL SPINDLES 50MM SHORT INFEED TABLE 1: BOTTOM 11 KW 2: RIGHT 11 KW Blodpfxoyl Rl Hj Ah Ijd 3: LEFT 11 KW 4: TOP 15 KW 5: TOP 15 KW 6: BOTTOM 11 KW CNC AXIAL CONTROL ON SPINDLES 3, 4 AND 5 40 M/MIN+ ELECTRIC. FEED 7 x DRIVEN TOP FEED ROLLERS 3 x DRIVEN BED FEED ROLLERS ANTI-KICKBACK DEVICE AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS DIMENSION: APPR 3000 X 2000 X 1800 MM WEIGHT: APPR. 4500 KGS DUSTHOODS: 6 x 140 MM DIAMETER DUST MANIFOLD INCLUDED POSSIBLE TO SUPPLY WITH MOULDER INFEED AND DROP LEAF OUTFEED POSSIBLE TO SUPPLY TOOLING IF NEEDED

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer Bsdpfx Ajyl Rlyjh Isld No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. Possible to supply with Weinig mechanisation if needed (Year 2012)

Condition: excellent (used), SCM Compact 23 Four-Sided Planer Working width: 230 mm Working height: 120 mm Number of spindles: 4 Spindle arrangement: Bottom 5.5 kW Right Left 7.5 kW Top 5.5 kW Spindle speed: 6000 rpm Feed speed adjustable via variator up to 22 m/min Blsdsylnr Rspfx Ah Ijd Spindles with adjustment

Condition: used, Year of construction: 2004, Speed 60 m/min 8 workstations Digital positioning Bedpfx Ahjyll D Rj Ield Chrome table Thrust bearings Lubrication 400V