Oliver Sommerfeld e.K. - ALLPLAN Authorized Partner

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 1,500 h, warranty duration: 3 months, 3DGence Industry F350 High-Temp 3D printer in fully operational condition Compatible materials: PEEK, PEKK, Ultem, PC, PEEK-CF etc. Bjdex Avbtjpfx Af Hjdk 3D printer including original accessories (3x extruder modules) Includes approximately 3 months of remaining warranty Inspection possible at any time!

Condition: used, functionality: fully functional, machine/vehicle number: S/N 1710S902, Year of construction: 2017, total length: 1,800 mm, total height: 1,520 mm, total width: 1,050 mm, 60kg of Extrudr Greentec Pro filament 2.85mm is included. Bdodpfx Afex Atytj Hok

Condition: excellent (used), SLM Solutions Model: SLM 280 HL For sale is a professional metal 3D printer SLM 280 HL by SLM Solutions (Lübeck). The machine comes from industrial use, is fully documented, and is delivered including nameplate data and technical documentation. The SLM 280 HL is designed for 24/7 operation and is suitable for aluminum, stainless steel, tool steel, cobalt-chromium, and many other metal powder materials. Included modules and accessories: - AMC 330 WB Air Management/Filter Module - HRS050-AF-20-M Chiller Unit - DC 1.5 KAESER Compressor / Compressed Air Module Technical Data (Excerpt) Machine Weight: 1,245 kg Dimensions (without accessories): Width: 1.7 m Height: 2.0 m Depth: 1.1 m Bjdpfx Afox Agt Hj Hsdk Build volume: 280 × 280 × 250 mm (optional depth 350 mm) Electrical connection: Power consumption: 15 A Building-side protection: 32 A Control voltage: 24 V DC Heating power: 1,200 W Protection class: IP50 Power input: 4.7 kW (single optics) / 8.0 kW (twin optics) Media supply Argon Operating pressure: 6 bar Flow rate (purge): approx. 130 l/min Flow rate (build process): approx. 3 l/min Quality: DIN EN ISO 14175 – Class 4.6 (≥99.996 %) Compressed air Operating pressure: 6 bar Flow rate: without nitrogen generator: approx. 100 l/min with nitrogen generator: approx. 500 l/min Quality: ISO 8573-1:2010 Class 1:4:1 Cooling water Medium: distilled water Primary circuit: Pressure: 4 bar Flow rate: 0.3 l/min Supply temperature: 18–20 °C Secondary circuit: Min. pressure: 2 bar Max. temperature: 40 °C Volume: 1.7 m³/h pH value: 5.8–7.0 Operating conditions Ambient temperature: 20–25 °C Max. relative humidity: 60 % Designed for continuous (24 h) operation (Weight approx. 1,245 kg). Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (see picture) - SLM 280 HL machine - Control cabinet - Process chamber - Internal control panel with screen - Available documentation, parts lists, manuals (Subject to changes and errors in the technical data!) We will be happy to answer any further questions by phone.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 720 h, total length: 700 mm, total height: 1,000 mm, total width: 760 mm, type of input current: AC, overall weight: 110 kg, input voltage: 230 V, The printer is in good optical and functional condition and ready for demonstration. The printer can process not only PLA, PETG, ASA, PA, etc., but also fiber-reinforced filaments (1.75mm). The IDEX printer is equipped with 2x 0.4 mm nozzles and can be accessed via WiFi, LAN, and USB. The printer is fitted with Klipper and can process models generated by the MINGDA-ORCASLICER. Due to over 700 operating hours, the 400x400x400 mm printer is being sold as a spare parts donor only, without any guarantee, even though it is in working condition. Viewing and test printing on site are welcome. The printer must be picked up in person in Genthin (39307) and is offered without packaging. Please refer to the relevant online resources for further technical data regarding this model. Bdodpfexz N Rfex Af Hek Packaging and transport must be organized by the buyer. Collection in person only!

Condition: like new (used), functionality: fully functional, Year of construction: 2014, total length: 1,100 mm, total height: 1,510 mm, total width: 850 mm, overall weight: 160 kg, We are offering an unpacking and sieving station as well as an unused drum mixing station from EOS GmbH. This mixing station is ideally designed for use in combination with wide-neck drums. It enables the efficient blending of sieved used powder with virgin powder over a defined period. The prepared powder mix can then be used in EOS Formiga P100 or P110 systems. The unpacking and preparation station consists of: • an unpacking area • a sieving unit for used powder • a feed for virgin powder • and a scale for the preparation of plastic powder. After removal from the machine, the cooled exchange frame is inserted into the unpacking and preparation station. By gradually raising the build platform using a foot pedal, the powder bed with components is pushed out of the exchange frame. The sintered parts are manually unpacked from the powder bed. Reusable used powder from the powder bed is pushed onto the adjacent perforated plate and falls through a hose into a sieve bowl. The used powder is sieved into a powder container placed on a scale beneath the sieving unit. The scale enables precise measurement of the quantity of recycled powder. Then, by turning the hand crank, a pre-determined quantity of virgin powder is fed into the powder container with the recycled powder. The prepared plastic powder then needs to be mixed in the mixing station before it can be used again in the build process. Mixing station Bodpfoxzpw Ssx Af Hedk We are offering an unused drum mixing station from EOS GmbH. In the mixing station, virgin and recycled powder, filled into powder containers by the unpacking and preparation station, are mixed. A powder container is rolled or placed onto the mixing station and then rotated continuously for a pre-set period. After the time has elapsed, the mixing station stops and the powder container can be removed.

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, total length: 406 mm, total height: 1,117 mm, total width: 406 mm, type of input current: AC, overall weight: 52 kg, input voltage: 220 V, input current: 5 A, input frequency: 50 Hz, positioning accuracy: 0.093 mm, feed length X-axis: 180 mm, feed length Y-axis: 101 mm, feed length Z-axis: 330 mm, EnvisionTEC Envision One cDLM XL – High-Precision 3D Printer (Demonstration Unit, Like New) For sale is an EnvisionTEC Envision One cDLM XL 3D printer—a professional high-end system for precise and rapid production of prototypes, functional parts, dental models, and small series. Condition: - Demonstration unit, very lightly used - Technically and visually like new - Clean, well-maintained, and ready for immediate use Technical Data: - Model: Envision One cDLM XL - Technology: Continuous Digital Light Manufacturing (cDLM) / DLP - Build Volume: 180 × 101 × 330 mm (X × Y × Z) - Native XY Resolution: 93 μm - Enhanced XY Resolution: up to approx. 60 μm - Layer Thickness: approx. 25 – 150 μm (depending on material) - Print Speed: up to approx. 45 mm/h - Light Source: High-performance DLP projector, 385 nm UV LED - Z-Axis: Dual linear guideway for high precision - Power Supply: 110/220 V, 50/60 Hz, 5 A - File Formats/Software: STL, Envision One RP Software External Dimensions & Weight: - Device dimensions: approx. 406 × 406 × 1,118 mm - Weight: approx. 52 kg Advantages: - Very high level of detail and outstanding surface quality - Ideal for dental, product design, industry, prototyping, and small batch production - Fast print times thanks to cDLM technology Bodpfx Afsxzdp Aj Hjdk - Large build volume for a desktop SLA/DLP system - Robust, precise, and suitable for industrial use Note: Perfect for companies, laboratories, and workshops looking for a reliable, professional, and almost new device. Inspection possible.

Condition: used, Year of construction: 2013, Total of 12 AMS 03D conveyor systems are available (vintage 2013 and 2014). Bdjdpfoxy Scnox Af Hok Ask for additional information!

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 11,000 h, input voltage: 420 V, The Fortus 450mc 3D printer is a powerful and user-configurable workhorse, ideal for creating functional prototypes, production tools and production parts. The build volume of Stratasys' Fortus 450mc measures 406 x 355 x 406 mm, allowing it to accommodate a variety of 3D-printed components. The selectable layer thicknesses of 0.127 mm, 0.178 mm, 0.254 mm and 0.330 mm also allow for perfect customisation options for your component. To get the most out of this Stratasys 3D printer, you will need a wash station. The Stratasys Fortus 400mc works with soluble support material SR30, or with break-away support, to display even more models and even enable undercuts and drilling in 3D printing, saving on post-processing steps. Bdedpfxoxy Rdws Af Hsk The Fortus 450mc FDM 3D printer works with the popular, free GrabCAD software, which allows even inexperienced users to produce their projects quickly and easily. Use the iSQUARED materials ABS, ABS-ESD, ABS-CF, ASA, PC-ABS, PC, ULTEM 9085 and ULTEM 1010 with this Stratasys FDM 3D printer model. The cassettes for construction and support material each contain 1510 cm³ or 3020 cm³. The Fortus 450mc 3D printer is a powerful, user-configurable workhorse, ideal for creating This printer can be installed anywhere and does not require any special installation conditions. No special ventilation is required because Fortus systems do not produce harmful fumes, chemicals or waste. Download the site preparation guide to see the space and connection requirements for the Stratasys Fortus 450mc. This machine also consists the SCA 1200HT support material cleaner to remove support material from your printed parts.

Condition: like new (used), functionality: fully functional, machine/vehicle number: D362625, Year of construction: 2023, DWS DW 029XC – Professional 3D Printer – SN D362625 – As New Condition Installation Year: May 1, 2023 List Price: €95,000 Availability: Immediate Origin: DWS showroom, only used for demonstrations Condition: As new The DWS DW 029XC is in impeccable condition, coming directly from a showroom and used exclusively for demonstration purposes. The machine is perfect, fully operational, and available for any test or inspection in Turin. Clearance sale price. Technical Specifications • Technology: Laser stereolithography • Laser source: Latest-generation high-stability blue laser • X/Y axis resolution: 20 microns • Z axis resolution: up to 1 micron depending on resin • Build area: 90 x 90 x 90 mm • Layer thickness: from 10 to 50 microns • Production speed: Very high due to the high-precision laser • Motion system: Digitally controlled build platform • Compatible materials: All DWS industrial and dental resin series, including castable, rigid, flexible, transparent, and technical materials • Resin loading: DWS cartridges with automatic management • Software included: Nauta Plus and Fictor • Connectivity: USB and Ethernet • Calibration system: Fast automatic calibration • Power consumption: Optimized for continuous professional use • Weight: approx. 45 kg • Power supply: 110/230 V Key Features • Micrometric precision • Ideal for jewelry, dental, fashion, and technical prototyping • Excellent surface quality • Professional-grade reliability Bdsdpexyuv Dofx Af Hek • Compact, quiet, and simple to use • Certified showroom origin Sale Price Very advantageous price for clearance. Photos, videos, and full documentation available upon request. The machine can be inspected at any time in Turin.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: NR103-2019, Year of construction: 2019, total length: 3,000 mm, total height: 2,600 mm, total width: 2,200 mm, overall weight: 2,500 kg, Demonstration machine from the Massivit showroom. Purchased on December 21, 2023. - List price (new): €399,000 - Used sale price: €150,000 - Sold with 228 kg of Dimengel (value: €11,172). The machine is in very good condition and has seen minimal use. Bedsxyqucepfx Af Hjdk

Condition: refurbished (used), functionality: fully functional, Year of construction: 2019, total length: 1,450 mm, total height: 1,800 mm, total width: 1,100 mm, type of input current: three-phase, overall weight: 3,000 kg, warranty duration: 12 months, table width: 1,450 mm, tank capacity: 19 l, table length: 1,100 mm, workpiece weight (max.): 150 kg, Description: The Massivit 1800 Pro is a large-format 3D printer engineered for companies that need to produce full-scale parts quickly and reliably. It is widely used in visual communication, automotive, marine, architecture, industrial prototyping, scenic construction, and composite mold fabrication. Equipped with two independent printheads, the system can manufacture two objects simultaneously or combine different print resolutions within a single job. Its generous 145 × 111 × 180 cm build volume allows the creation of tall, lightweight structures in a fraction of the time required by traditional additive technologies. Thanks to Massivit’s GDP (Gel Dispensing Printing) process, the machine prints complex geometries, large hollow volumes, overhangs and non-vertical walls without support structures, significantly reducing material consumption and post-processing. The printer is compatible with a wide range of Massivit-certified materials, including: • Dimengel 90 – general-purpose, cost-effective • Dimengel 100 – high-strength translucent material • Dimengel 300 Transparent – clear gel for optical or light-diffusion parts This unit has been fully refurbished by Futura3D B.V., with long-standing experience on Massivit systems, and restored using original-spec components. The printer is ready for immediate production. Machine Condition: • Fully refurbished by Futura3D B.V.with long-standing experience on Massivit systems • Dispensers fully rebuilt (new stators, bearings, couplings with all original components) • Pump and hydraulic system cleaned and serviced • UV modules tested and calibrated • Complete mechanical alignment performed (XYZ, SZ, table, material calibration) • Functionally tested and ready to print Machine viewable in Fleurus, Hainaut, Belgium, by appointment What’s Included: crate - Reinforced international-grade wooden shipping crate (included) installation - On-site installation and 1-week operator training Support - 1 year of technical assistance & remote support Possibility to print samples or perform an in-person demo with your files (appointment required) Key Specifications & Highlights: Large-format build area: 145 × 111 × 180 cm Dual independent print heads for higher throughput High-speed UV-curing gel deposition (up to ~300 mm/s) Support-less printing of complex shapes and overhangs Bodsxx S Dijpfx Af Hjdk Multiple print modes (Normal, Quality, High-Resolution, Mega-Quality, Variable Resolution) Remote monitoring, onboard cameras, and real-time head-tip view Ideal for full-scale prototypes, molds, displays, sculptural pieces, and industrial components. Incoterms & Logistics: Incoterm: FCA Brussels (Belgium) Machine professionally dismantled, packed in reinforced wooden crate (~3000 kg), and made available for carrier pickup. Transport, insurance, customs clearance and international shipping are arranged by the buyer.

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Bsdpjxw Uyqjfx Af Hodk Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 211 h, General Data Bdedpfxjxwz Arj Af Hjk Measurements width 610 mm Measurements depth 650 mm Measurements height 1200 mm Additional Equipment Inert Gas Control System: Yes This SINTERIT lisa x was manufactured in 2023. A compact and efficient plastic 3D printer, it offers advanced printing capabilities suitable for various applications. Ideal for small to medium-sized projects requiring precision and reliability. Consider the opportunity to buy this SINTERIT lisa x plastic 3D printer. Contact us for more information. Application Types 3D Printing

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, The Massivit 5000 3D printer enables ultra-fast custom manufacturing for both the visual communication market and industrial sectors such as the automotive, aerospace, railway, and marine industries. Equipped with a dual-material system and two printheads, the M5000 allows you not only to print two different objects but also to print with two different materials simultaneously. The extraordinary build volume of 145 x 111 x 180 cm enables the production of full-scale parts in no time. Large, complex forms are no challenge for this machine. Bdjdjxwpvgepfx Af Hjk Furthermore, a variety of materials is available for the machine.

Condition: like new (used), functionality: fully functional, machine/vehicle number: EV.30.53281656, Year of construction: 2018, operating hours: 20 h, total length: 262 mm, total height: 158 mm, total width: 63 mm, type of input current: AC, input voltage: 220 V, Portable 3D color scanner for fast and accurate scanning! Lightweight and compact for comfortable, seamless 3D scanning. No target markers required! Areas of application: architecture, education, automotive, aerospace, healthcare, forensics, sports, fashion, film, archaeology, reverse engineering, and more... Eva is a versatile solution for capturing all types of small to medium-sized objects, from machine parts and furniture to sculptures and human bodies (safe structured light – no lasers!). Included is a battery pack for mains-independent scanning, e.g., outdoors. The scanner was only used by us for a single project to scan samples for a museum, after which it was recalibrated by ARTEC and has since been stored in its original packaging. Original purchase price including additional battery: €14,400 net (€17,280 gross). Bodpsxwpq Dsfx Af Hedk Scope of delivery: 3D scanner Artec Eva in its original packaging Additional battery for portable, mains-free scanning The Artec Studio software with AI-powered HD mode and Autopilot can be obtained directly from Artec, as a lot has improved since then (thanks to continuous improvements in Artec Studio software, the scanner, like good wine, keeps getting better!). This scanner is extremely versatile – we kindly ask you to review all its features on the ARTEC homepage.

Condition: used, functionality: unexamined, machine/vehicle number: EVO-lizer A4, Year of construction: 2015, operating hours: 4,413 h, total length: 720 mm, total height: 720 mm, total width: 540 mm, type of input current: AC, overall weight: 64 kg, input voltage: 230 V, input current: 4 A, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.05 mm, table width: 270 mm, tank capacity: 11 l, table length: 195 mm, noise level: 46 dB, number of print heads: 2, Used FDM 3D Printer EVO-lizer A4 Device Data: Printer dimensions (W x D x H): 540 x 720 x 710 mm Bdsdexu I R Dopfx Af Hok Weight: 64 kg Connection data: 230 VAC; 50/60 Hz; 4A Ambient temperature: 15 – 35 °C Ambient humidity: 30 - 70 % Acoustic Data: Idle mode: 40 dBA Operating mode (1 m distance): 46 dBA Operating mode (40 cm distance, door open): 62 dBA Technical Data Sheet: Print bed size (W x D x H): 270 x 195 x 205 mm Minimum layer thickness: 0.10 mm Positioning accuracy: 0.05 mm Nozzle temperature range: 160 – 260 °C Print bed temperature range: 30 – 100 °C Filament material: ABS, PLA Filament diameter: 1.75 mm Software/slicing program: EVO-lizer

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21450012211002129, Year of construction: 2024, operating hours: 2,262 h, construction height: 200 mm, construction width: 270 mm, working length: 330 mm, Equipment: CE marking, Hardly used showroom machine with very few operating hours! TECHNICAL DETAILS Build volume: 330 mm x 270 mm x 200 mm Layer height: from 50 µm Precision X, Y: 150 µm MACHINE DETAILS Bodsxu E Srepfx Af Hodk Technology: FFF + CFR (Continuous Fiber Reinforcement) Compatible materials: Onyx, Onyx FR, Onyx ESD, Nylon White, Carbon fiber, Glass fiber, Kevlar, HSHT Operating hours: 2,262 h EQUIPMENT Eiger software (cloud and local) Connections: Ethernet, Wi-Fi, USB Material dry box for safe storage Continuous fiber reinforcement: carbon fiber, glass fiber, Kevlar Enclosed build area for optimal thermal stability High-resolution optical encoders Prepared for Blacksmith (automatic dimensional calibration) Certificates: CE, FCC, UL, UKCA

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: C362922, Year of construction: 2023, overall weight: 550 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, laser source model: Solid State BlueEdge, Hardly used showroom machine with very few operating hours! TECHNICAL DETAILS Working area Bedpfjxu E H Nox Af Hedk Working area (X): 300 mm Working area (Y): 300 mm Working area (Z): 500 mm Layer thickness: 10–100 µm MACHINE DETAILS Technology: Laser Stereolithography (SLA) Laser source: Solid State BlueEdge Scanning method: Galvanometer Input file formats: .stl, .slc, .nauta, .fictor, .mkr, .3dm, .3ds, .ply, .obj, .lwo, .x Operating conditions Operating temperature: 20–25 °C Humidity: 60 % Electrical data Power supply: AC 230 V / 50 Hz Power consumption: 500 W Dimensions & Weight Machine dimensions: 704 × 1,446 × 2,420 mm Weight: 550 kg EQUIPMENT Software Ports: USB / Ethernet Compatible with: wide range of DWS resins (transparent, technical, elastic, functional) Intuitive control and user interface

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Bodoxu Ewzepfx Af Hedk Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 140L-C, Year of construction: 2022, operating hours: 5,854 h, total length: 1,450 mm, total height: 1,040 mm, total width: 1,250 mm, type of input current: AC, overall weight: 380 kg, input voltage: 400 V, input current: 12 A, input frequency: 50 Hz, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, electrical fuse: 16 A, table width: 500 mm, tank capacity: 140 l, table length: 700 mm, power: 8.3 kW (11.28 HP), travel speed (max.): 24,000 mm/min, number of print heads: 2, Refurbished Industrial Fused Filament Fabrication (FFF) Printer Includes: - 140L-C printer - Vibration-damped platform - License for slicing software (Simplify3D) Original price €73,800 General Technical Data: Model: HAGE 3D-140L-C Year of manufacture: 2022 Operating hours: 5,854 h Printing technology: FFF (Fused Filament Fabrication) Filament diameter: 1.75 mm; open material system (not limited to specific manufacturers) Build area (L x W): 700 mm x 500 mm Maximum print height: 400 mm Maximum build volume: 140,000 cm³ Dimensions and Weight: Length: 1,450 mm Width: 1,250 mm Height: approx. 1,040 mm Weight: approx. 380 kg Temperature: Maximum printhead surface temperature: 300°C (optionally 450°C) Maximum build plate surface temperature: 180°C Maximum chamber temperature: 85°C Minimum operating temperature: +10°C Maximum operating temperature (ambient): +40°C Electrical Data: AC input: 400 V / 50 Hz Power supply: 24 V DC Connection: USB 3.0 / Ethernet Print Specifications: X-axis speed: up to 400 mm/s Y-axis speed: up to 400 mm/s Z-axis speed: up to 300 mm/min XY-plane print accuracy: < 0.1 mm Printer Control: Industrial controller (Sigmatek) Software: HAGE3D All documentation available Bdedpfexuh Nyex Af Hjk Platform: 1,450 x 1,250 x 600 mm (LxWxH) Including storage compartments Including machine feet with vibration damping

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,600 h, total length: 800 mm, total height: 1,100 mm, total width: 1,150 mm, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, positioning accuracy: 0.02 mm, Equipment: compressor, The industrial IDEX System 3D Printer EL-102 V2 + Upgrade Kit is capable of processing both plastic and metal filaments! Original price: €62,000 Technical specifications: Build volume / print size (W x D x H): 500 x 400 x 510 mm Extruder: 2 units, independent along one axis. With cleaning station. Print bed temperature: 200°C Build chamber temperature: 100°C – for high reproducibility, increased strength, and reduced internal stress in printed parts Nozzle temperature: 420°C Bsdpfx Afsxt N A Sj Hjdk Display: 10.1-inch touchscreen display Closed-loop drive system Precision: Linear axes with ball screw drives for maximum accuracy Connectivity: WLAN, LAN, and USB interface (controllable via web browser) Enclosure ventilation: Activated carbon filter Water cooling Compatible with third-party filaments Filament drying: up to 2 x 10 kg spools

Condition: excellent (used), functionality: fully functional, machine/vehicle number: Z50009537, Year of construction: 2018, operating hours: 167 h, total length: 50 mm, total height: 81 mm, total width: 57 mm, type of input current: DC, overall weight: 41 kg, input voltage: 220 V, table width: 305 mm, table length: 305 mm, For sale significantly below market value: a professional Replicator Z18 3D printer that has seen very little use (only 166 operating hours). Extra-large build area: 30.5 x 30.5 x 45.7 cm Features: - Supported by the new, user-friendly MakerBot Replicator 3D Printing Platform - Cloud-based system with application support - MakerBot Replicator Smart Extruder, motion controller, and new axis design - Integrated onboard camera and diagnostics, assisted calibration Bdjdpfxjxt Er Ao Af Hok - Large build volume allows for rapid prototyping and model production - 11% larger print area than the MakerBot Replicator 2 Build volume: - 25.2 L x 19.9 W x 15.0 H cm - 7,522 cubic centimeters Easily and quickly produce realistic objects - On-demand printing capability - 100-micron resolution: print ultra-thin layers - Create professional-quality, high-resolution prototypes and complex models - Fine surface finish with no need for post-processing - Produce realistic prototypes and models for presentations Includes: - 3.5" color LCD display: onboard user interface for a rich user experience - Access your personal library and preview 3D files - Onboard utility for setup and maintenance MakerBot Replicator Smart Extruder (print head): - Easily replaceable - Detects filament outage and pauses printing automatically - Sends notifications to MakerBot Desktop and MakerBot Mobile app Onboard camera: - For print monitoring and sharing on MakerBot Thingiverse or social platforms - Mobile control option

Condition: used, functionality: fully functional, Year of construction: 2017, Operational condition! Ask for additional information! Bdjdpfx Ajxrz Tgof Hsk

Condition: excellent (used), functionality: fully functional, machine/vehicle number: D312363, Year of construction: 2019, total length: 610 mm, total height: 1,400 mm, total width: 660 mm, type of input current: DC, overall weight: 150 kg, input voltage: 230 V, input frequency: 60 Hz, positioning accuracy: 0.01 mm, feed length X-axis: 150 mm, feed length Y-axis: 150 mm, feed length Z-axis: 200 mm, Equipment: CE marking, emergency stop, 3D SLA printer using liquid resin. High precision, large production capacity. Fully compatible with most CAD/CAM systems. Extremely high level of accuracy and surface quality. Capable of printing with 50 or more different materials suitable for all sectors: industry and design, jewelry and fashion, dental and biomedical, prosumer. Bdjdpfsxrg R Dex Af Hjk

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 689 h, Professional FDM 3D printer ideal for prototyping, tooling, and functional part production. Very low use (only 689 h). Build volume: 355 × 305 × 305 mm. Compatible with Nylon 12, PC-ABS, and SR110 soluble support. Includes cleaning station, 20 build trays, and a drying station with full maintenance (summer 2025). Key components renewed: pulleys, belts, fittings, and guide tubes. Bdodpfxexq Enfs Af Hjk Excellent condition — high precision and low cost per part, perfect for industrial applications.