Roundwood Machinery Ltd

Condition: used, Year of construction: 2019, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: BP 500 A, DESCRIPTION BRIQUETTING PRESS The press is designed for compacting secondary raw materials into briquettes (briquette shape: rectangular). Technical data of the press: Dimensions: Length: 1800 mm (2100 mm during transport) Width: 1800 mm (2000 mm during transport) Height: 1900 mm (2200 mm during transport) Net weight: 2945 kg Power supply: 380 V 50 Hz 33 kW 70–100 A Output capacity: 450 kg/h (+/-50 kg depending on the type and fraction of raw material) Noise level: A-weighted sound pressure level at the workplace: 77.8 dB +/-5 dB Compression force: Minimum: 1000 kg/cm² Maximum: 1700 kg/cm² Dsdpfx Aexmav Nofpowc Pressure: Max. 300 bar Maximum raw material moisture: Not more than 14% Briquette dimensions: Width: 150 mm Thickness: 60 mm Length: 40–105 mm Permissible operating ambient temperature: -20°C to +35°C (up to +50°C with additional cooling system) The press consists of: Electrical system — controls the hydraulic press system. Equipped with four electric motors: the first (30 kW) is for driving the main hydraulic pumps; the second (1.1 kW) is for the cooling pump; the third (0.55 kW) is for the fan of the oil cooling system; the fourth (1.5 kW) is for driving the sawdust feeding screw. The operation of the motors and hydraulic valves is controlled via contactors and intermediate semiconductor relays by a microprocessor with expansion modules. A liquid crystal display with buttons is provided for visualization and parameter adjustment. Hydraulic system — controls the operation of hydraulic cylinders using pumps, high and low-pressure lines, solenoid hydraulic valves, and hoses. There are three hydraulic cylinders: the first (main), designed for pressing sawdust; the second (vertical), for the preliminary compaction of sawdust; the third (forming), for transferring briquettes to the mold. An oil cooling system with pump and air cooler is also installed. Oil filtration is provided by the main high-performance filter, a cooling system filter, and a fine filter. Feeding of raw material is provided via a feed hopper integrated in the press. The raw material entering the hopper is intermittently mixed to prevent bridging. The agitator is driven via a chain from the screw drive motor-reducer. The screw cyclically feeds raw material into the vertical cylinder shaft. The hopper is equipped with two level sensors (lower and upper). If the hopper is enlarged, the sensors can be relocated as needed. Control — dual operation: manual and automatic. All control equipment is installed in the electrical cabinet. Automatic control is the standard operating mode of the press without operator intervention. Manual control is intended for press setup, fault detection, cylinder reset, or in case of emergency. Operation is simplified by the display located on the cabinet door, which allows the user to view and modify parameters and monitor the condition and errors of the press.

Condition: used, In a woodworking plant, several hundred kilograms of dry wood waste, wood shavings, sawdust, etc. can be generated daily. This in-house waste can be processed into raw material suitable for briquetting. With a complete hydraulic briquetting system — capable of producing 50-120 kg of briquettes per hour — the wood waste generated in the workshop can be efficiently converted into wood briquettes. In this way, the building can be heated using the briquettes. The investment can pay for itself within a year, and afterwards, it can generate profit. Additionally, the system provides efficient, cost-effective waste processing. An optional oil cooler can be connected to the E70 Eco model, enabling continuous operation. Thanks to the higher capacity, the machine does not need to run for a full eight hours per day, since the same amount of briquettes can be produced within a shorter period. Dwsdpfx Afexl Ri Dopjc

Condition: like new (used), Year of construction: 2020, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, power: 5.5 kW (7.48 HP), WEIMA C 150. The press is equipped with direct extraction, suitable for connection to saws and spindle moulders. The machine has only been used for plastics (PUR foam boards). Motor power: 5.5 kW, 400 V, 50 Hz. Weight: 830 kg. The press has seen minimal use and is in excellent condition. Can be demonstrated. Still in operation but rapidly available. Dwedpfoxk Ttpox Afpjc Includes fan, ducts, and 3 pneumatic slides.

Condition: excellent (used), Year of construction: 2018, operating hours: 619 h, functionality: fully functional, machine/vehicle number: 910-2345, total width: 1,120 mm, total height: 1,400 mm, total length: 1,700 mm, briquette diameter: 40 mm, overall weight: 600 kg, type of input current: three-phase, input current: 12 A, input frequency: 50 Hz, input voltage: 400 V, pressure: 150 bar, power: 4 kW (5.44 HP), WEIMA C140 briquetting press with chip container, almost like new with very few operating hours, with 380 V plug, ready for demonstration. Dedpoxg R Iiefx Afpewc

Condition: used, Year of construction: 2015, operating hours: 42,000 h, functionality: fully functional, machine/vehicle number: 1637, power: 75 kW (101.97 HP), Equipment: emergency stop, safety light barrier, We offer a fully operational briquetting line with a current capacity of 1 ton/hour, producing high-quality cylindrical briquettes (Ø 85 mm), expandable to 2 t/h The line has been in operation since 2015 and is still running – available for inspection in production until end of October 2025. Main equipment (2015 installation): Briquetting press DiPiu MB-90 (Italy) Fully automatic saw for briquette cutting Automatic packaging line (5 pcs = 10 kg bundles) Stretch-film pallet wrapping system 2 × Fiedler boilers, 600 kW each 2 × BS-2 drum dryers Taurus crusher (CZ) Cyclone and dedusting system Digital control & monitoring system by KME Brno (remote monitoring, SCADA type) Upgrades (2018): Star screen system (separating oversized particles from sawdust) Bucket conveyor (feeding raw material from crusher to 5 m³ buffer hopper above press) Additional conveyors between production stages Optional equipment (extra cost): Second DiPiu MB-90 briquetting press available Additional automatic saw → allowing expansion to 2 tons/hour capacity Product quality: Briquettes supplied into major retail chains (e.g. Hornbach) – proven premium quality. Price & conditions: Asking price: E 280 000 (negotiable for fast decision) Availability: November 2025 Location: Volenice, Czech Republic Condition: Used, well maintained, fully operational Reason for sale: Facility to be converted into new metal workshop. Zu verkaufen: Komplette Brikettierlinie – Kapazität 1 t/h (erweiterbar auf 2 t/h) Wir bieten eine voll funktionsfähige Brikettierlinie mit einer aktuellen Kapazität von 1 Tonne pro Stunde, die hochwertige zylindrische Briketts (Ø 85 mm) produziert. Die Anlage ist seit 2015 in Betrieb und läuft noch heute – eine Besichtigung im laufenden Betrieb ist bis Oktober 2025 möglich. Hauptausstattung (Installation 2015): Brikettpresse DiPiu MB-90 (Italien) Vollautomatische Säge zum Brikettieren Automatische Verpackungslinie (5 Stück = 10 kg Bündel) Stretchfolien-Palettenwickler 2 × Fiedler-Heißwasserboiler, je 600 kW 2 × Trommeltrockner BS-2 Taurus-Zerkleinerer (CZ) Zyklon- und Entstaubungssystem Digitales Steuerungs- & Überwachungssystem von KME Brno (Fernüberwachung, SCADA) Modernisierung (2018): Sternsieb-System (Abtrennung von groben Partikeln) Becherwerk (Förderung des Rohmaterials vom Zerkleinerer in den 5 m³-Pufferbunker über der Presse) Zusätzliche Förderbänder zwischen den Produktionsstufen Optionale Ausstattung (gegen Aufpreis): Djdpexga Rtefx Afpjwc Zweite DiPiu MB-90 Brikettpresse moeglich Zusätzliche automatische Säge → ermöglicht eine Erweiterung auf 2 Tonnen pro Stunde Kapazität Produktqualität: Briketts wurden an große Einzelhandelsketten (z. B. Hornbach) geliefert – nachweislich Premiumqualität. Preis & Bedingungen: Preisvorstellung: €280.000 (verhandelbar bei schneller Entscheidung) Verfügbarkeit: ab November 2025 Standort: Volenice, Tschechische Republik Zustand: Gebraucht, gut gewartet, voll funktionsfähig Verkaufsgrund: Umstellung der Produktionsstätte auf eine neue Metallwerkstatt.

Condition: refurbished (used), Year of construction: 1921, functionality: fully functional, briquette diameter: 90 mm, overall weight: 6,000 kg, power: 55 kW (74.78 HP), year of last overhaul: 2025, Complete line with 2 presses in excellent condition! Motor approx. 55 kW, Capacity approx. 1,400 kg/h, Press cylinder approx. 90 mm (with or without hole!) Preheated to approx. 60°C (circulating with heat recovery via the oil tank) Dwjdsxdrz Espfx Afpjc Cross-cut saw, fully automatic, fully automated saw feed, incl. control cabinet Packaging unit Consisting of: 1 rubber conveyor belt (briquette feed); followed by shrink tunnel system, 400 V, shrink tunnel opening approx. 1,600/600 mm, max. height approx. 200 mm, roller outfeed approx. 3 m Buffer bin (silo approx. 20 m³) for press feeding

Condition: good (used), Year of construction: 1990, still well-preserved briquetting press Hydraulic motor 5.5 kW Chip container below: 120 x 120 cm Dwedpfoxdlhrex Afpoc with slanted top extension (top 2 m), 85 cm high A filter top extension is available on request (for an additional charge) A smaller top extension made of wood can also be constructed

Condition: excellent (used), Briquetting machine POR Oscar 9kW Average briquette output: 130-180 kg Briquette diameter: 70 mm Motor power: 9 kW Feeding hopper diameter: 1170 mm Dwodpfoxdahyox Afpjc Technical documentation CE mark Machine weight approx. 800 kg

Condition: like new (used), Motor power: 5.5 kW Briquette diameter: 60 mm Sawdust level sensor Operating hours: 1611 h Hopper diameter: 1000 mm Dedpsxcvgvofx Afpewc Year of manufacture: 1998 CE marking

Condition: excellent (used), Catalogue number 7737 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1000 mm - Output: approx. 70 kg/h - Automatic machine operation - Motor: 5.5 kW - Dimensions (L/W/H): 1800x1150x1540 mm - Weight: 900 kg Dwodjxbr I Hopfx Afpjc FEATURES – Italian-made – Used briquetting press – DTR technical documentation – Very good condition Net price: 36,900 PLN Net price: 8,680 EUR based on exchange rate 4.25 EUR (Prices may change with significant currency fluctuations)

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1200 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Motor: 7.5 kW - Max working pressure: 150 bar - Extraction nozzle: 90 mm - Filter bag opening diameter: 500 mm - Max bag height: 900 mm - Dimensions (L/W/H): 1950x1400x2700 mm - Weight: 1130 kg ADVANTAGES – Italian manufacturing – Possibility of direct connection to sawdust extraction – Used briquetting machine – DTR documentation – Very good condition Djdsxa Ephopfx Afpjwc Net price: 29,900 PLN Net price: 7,050 EUR (exchange rate: 4.25 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Briquetting press NAZZARENO OL D 201 7.5kW Average briquette production: up to 70 kg/hour Maximum briquette length: 200 mm Briquette diameter: 60 mm Motor power: 7.5kW CE marking Dsdpow U Tbvsfx Afpjwc

Condition: ready for operation (used), Year of construction: 2006, In good condition briquette press, ready for use. The hydraulic pump was replaced 6 months ago. Equipped with a new, more powerful and efficient electric motor, as well as a new oil pump, ensuring better productivity. The machine has no oil leaks and has been serviced exclusively by the official RUF representative in Latvia. Dwodpfxew Spkne Afpec

Condition: used, Year of construction: 2019, Used machine Identical in construction to Weima C 150 Year of manufacture: 2019 1845 operating hours Equipment and technical data: Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil capacity: 160 l Throughput capacity: up to 50 kg/h (depending on material) Connection rating: 400 V +/- 5% / 50 Hz Includes: Press mechanism with filling cylinder, main cylinder, clamping cylinder Connection part for transport line Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Control cabinet and electrical control system Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Material: shavings, sawdust from solid wood, loose, clean and free from contaminants* Maximum dimensions: 10 mm Throughput performance: approx. 50 m³/year/ * Contaminant specification: Everything except wood, wood pieces larger than 15 mm. The throughput capacity is highly dependent on the material. Stated values are averages. May vary depending on mix ratio, moisture content, and material characteristics! Application case not known or not fully specified. Machine is being sold appropriately and solution-oriented by a specialist dealer. With oil cooler or water cooling; ensure adequate ventilation for the press/unit/oil cooler. Dwjdpfjw Rhk Dex Afpoc In case of heat build-up, operating time may be drastically reduced due to increased temperature. With new press clamp Availability: by arrangement Location: Flörsheim

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: FBP 60, total width: 1,280 mm, total height: 1,540 mm, total length: 1,900 mm, briquette diameter: 60 mm, overall weight: 1,300 kg, oil tank capacity: 230 l, I am selling my almost new Felder FBP60 briquetting press (50-70kg) with screw gearbox, fill level sensor, and round silo, 3×400V 50Hz 9.0kW, weight 1300kg. Top condition!!!!! Purchased in September 2023. The machine is like new. For sale due to business closure. Viewing possible at any time. Dodpfx Ajw H Dulefpewc

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Briquetting press for wood or wood-like materials Throughput: approx. 80 - 100 kg/h Briquette: 60 mm cylindrical Motor: 7.5 kW Dwodsw Hpizspfx Afpjc Oil heating 6,374 operating hours Dimensions: approx. 2150 x 1700 x 1400 mm Container size: 1400 x 1400 x 920 mm Optional: Extraction unit available as a hopper attachment. Requirements: Ideal input material: chip length less than 25 mm Moisture content: 6–12% ATRO Machine is suitable for intermittent operation, e.g. up to 2 hours briquetting; 1 hour pause, etc. If the machine is to run continuously for more than 2 hours at a time, an optional cooling system must be connected.

Condition: excellent (used), functionality: fully functional, BRIQUETTING machine , HYDRAULIC , AUTOMATIC , model POR STANDARD second hand machine working conditions : Excellent briquette cutter system CE mark : Yes briquett diameter mm. 65 briquett length mm.50 / 300 Dedsw E Iyijpfx Afpjwc production from 60 kg. to 90 kg./hour motor power Hp 7,5 net weigth kg. 800 overall dimensions cm.195 x 110 H=cm.150 volt. 380/50

Condition: ready for operation (used), Year of construction: 2015, Briquette Diameter: 40 mm Power: 4,1 kW Press Output per hour: 30 kg/h depended on material Hopper opening: 900 x 900mm Controlled by PLC Hydraulic tank: 50l Autom. ON/OFF with level alarm Oil temperature sensor Transport pipes Used machine in good condition Dwsdpfx Afew Ewpgjpsc

Condition: used, Two Valmac briquetting presses with a screw conveyor, storage silo, cooling line, and crusher. Further information available upon request. Briquette diameter: 70 mm engine: 37 kW each power: approx. 400 kg/h per press Dwedpfew Dnc Uox Afpoc

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: HaRo2020, total width: 800 mm, total height: 1,100 mm, total length: 1,200 mm, briquette diameter: 60 mm, overall weight: 300 kg, warranty duration: 12 months, type of input current: AC, input voltage: 400 V, power: 3 kW (4.08 HP), Equipment: emergency stop, Our new HaRo2020 briquetting press, with a capacity of up to 40 kg/h, automatic tongs, and pre-compactor, is manufactured by ourselves. You can only purchase this machine directly from us, as we do not use intermediaries. The briquetting presses are CE-compliant and manufactured according to the latest standards. Since we produce most of the components in-house, we can offer the machine at a particularly competitive price. Price is exclusive of VAT. The new hydraulic unit is equipped with a SILENCE-PUMP, making the machine extremely quiet in operation. Another benefit of the helical gearing in the pump is increased durability. Everything is made in Germany! You are welcome to visit us and test the machine with your own material. When purchasing our briquetting press, you will receive a detailed and comprehensive German (PDF) operating manual for this machine. The input material must have a moisture content below 15%—ideally 10 to 12%—for sawdust and planer shavings. Technical Data – Hydraulic unit: 3.0 kW (connected load) – Power consumption per hour: approx. 1.8–2.0 kWh – Throughput: approx. 15–40 kg/h Dwedpfxow A Hvds Afpoc – Voltage: 400 V – Frequency: 50 Hz – Circuit protection: 16 A plug – Power cable length: 3 m – Hydraulic control with Bosch Rexroth valves – Briquette diameter: 60 mm (length varies according to material) – Motor equipped with motor protection switch and emergency stop—for operator and machine safety, including motor protection – No electronic components prone to failure such as controllers, sensors, or complicated electronics – Pressing without additives – Counter-pressure adapts fully automatically to your material – Thanks to the pre-compactor, bulky shavings are no problem – No adjustments or monitoring of the pressure required – Fully automatic operation Spare parts supply is guaranteed, as we manufacture the machines in small series in our facility in Germany. The large oil tank ensures that the oil will not overheat during continuous operation. Machine dimensions: Length: 1.25 m Width: 0.82 m Height: 1.11 m Feed hopper: Diameter approx. 80 cm x height 60 cm Weight: 300 kg The briquetting press is immediately operational and does not require installation—just plug it in and start working. The machine can be viewed and tested on-site. You are welcome to send us a sample of your material for testing; we find this is the most effective method.

Condition: like new (used), Year of construction: 2014, operating hours: 146 h, functionality: fully functional, Equipment: cooling unit, The press has only 146 working hours. Capacity up to 450 kg/h Square briquettes: L 150 x w 60 x H setable 40 - 110 mm Main motor 30kW Cooling system for hydraulic oil Packing table + sealing unit Feeding hopper. Dwsdpfewzaxcjx Afpjc

Condition: excellent (used), Year of construction: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior models; however, it is equipped with a larger motor and hydraulic pump, and a more advanced electrical system. General Features: Dwjdpfswyc H Tex Afpjc - Robust construction - Very user-friendly and economical to operate - Easy maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Circuit diagram - CE compliance - Operating manual Technical Data: - Motor power: 7.5 kW, 400 V, 50 Hz connection - Number of press cycles per minute: 14 - Throughput: 60 – 100 kg/h (material-dependent) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Hydraulic tank capacity: approx. 180 liters - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Including approx. 2 m briquette discharge pipe Note on used machines: - Specifications are subject to change and prior sale. - All prices are ex works – free loading at location. - The machine has been cleaned and tested for functionality. - All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. - Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: refurbished (used), Year of construction: 2025, I sell the heavy duty briquetting press RUF RB440. Djdpewun I Eofx Afpswc Year 11/2002, Fully reconditioned with warranty 2025 Motor power 30kW Productivity Amount 440 pcs. wood briquettes / hr. Wood briquette RUF 150 x 60 x 40-110mm (depends on material) Material humidity up to 15% Nominal pressing power 14200 N/cm2 Oil cooler included. Dimensions 3000 x 1800 x 2000 mm Total power 3000kg Composition right - right side input Condition after full recondition / 500 working hours warranty like new. Available immediately. Including full documentation and CE.

Condition: like new (used), Year of construction: 2025, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 1630, overall weight: 7,800 kg, warranty duration: 6 months, power: 85 kW (115.57 HP), Fully refurbished DI PIU BRIK MB100 machine (factory-refurbished in 2025), ready for immediate operation. This machine is designed for high-capacity briquetting, suitable for demanding industrial applications. The machine has approximately 2,000 operating hours. Dwsdpswrp Emjfx Afpjc It has been newly refurbished at the Di Più factory, with all vital parts replaced, all wiring and electrics renewed, and all necessary electrical components updated. The machine is thus in 'as new' condition and comes with a 6-month factory warranty from Di Più. The machine can produce briquettes with or without a hole, diameter from 90mm to 110mm, from soft or hard wood, in round or square shape. The machine can be inspected at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy. The Di Più BRIK MB100 mechanical briquetting press is an automatic machine for compressing wood, sawdust and other waste materials into wood briquettes. The ideal moisture content of the input material is between 8% and 12%, with particle size between 1 mm and 12 mm. Technical specifications: - Production capacity: 1,300 – 2,300 kg/h (with sawdust density of 160–200 kg/m³) - Briquette diameter: 90 – 110 mm - Main motor power: 75 kW - Total installed power: 98 kW - Piston compaction pressure: 2,000 – 2,500 kg/cm² - Vertical screw with gear reducer: 5.5 kW - Oil pump: 1.5 kW - Oil pump for closing the extrusion head: 1.5 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil lubrication system for bronze bearings: 100 litres - Briquette output sensor (automatic shut-off when material is depleted) - Protective covers for moving parts - Oil pressure sensor - Control cabinet - Input material hopper (accumulator) - Level sensor for monitoring feed system - Machine weight: approx. 7,800 kg ADDITIONAL: NOVAPAC wrapper Option to purchase a NOVAPAC wrapper, fully compatible with the Di Più BRIK MB100 and other machines, ideal solution for automatic packaging directly after pressing. Year of manufacture: 2013 Price: €19,000 Equipment shown in the last 6 photos.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 1875, overall weight: 5,200 kg, warranty duration: 6 months, power: 62 kW (84.30 HP), DI PIU BRIK MB90 machine, ready for immediate operation. The machine is designed for reliable and efficient briquetting. Thanks to its high capacity and robust construction, it is ideal for industrial use. Dwsdpjwrp Eaofx Afpec The machine has 15 operating hours, as an official commissioning has been performed. Buyer receives 6 months factory warranty. Machine inspection is possible at the factory in Italy: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italy The Di Piu BRIK MB90 mechanical briquetter is an automatic machine for compressing wood, sawdust, and other waste materials into briquettes. Recommended input material moisture: between 8% and 12%, particle size between 1 mm and 12 mm. Technical specifications: - Production capacity: 1,100 – 1,800 kg/h (with sawdust density 160–200 kg/m³) - Briquette diameter: 85 mm - Main motor power: 55 kW - Total installed power: 62 kW - Piston compaction pressure: 2,000 – 2,500 kg/cm² - Vertical screw with reducer: 3 kW - Oil pump: 1 kW - Oil pump for pressing head closure: 0.55 kW - Feeder with screw and adjustable speed: 1.5 kW - Oil lubrication system for bronze bearings: 90 liters - Briquette output sensor (automatic shutdown when material runs out) - Protective covers for moving parts - Oil pressure sensor - Control panel - Storage hopper for input material (accumulator) - Level sensors for feed system control - Machine weight: approx. 5,200 kg ADDITIONAL: NOVAPAC wrapping machine Optional purchase of the NOVAPAC wrapper, fully compatible with the Di Più BRIK MB90 and other machines, an ideal solution for automatic packaging of briquettes directly after pressing. Year of manufacture: 2013 Price: €19,000 Equipment visible in the last 6 pictures