Nanotech Kesici Takım Makina San. ve Tic. Ltd. Şti.

Condition: good (used), Well-maintained external cylindrical grinding machine by WMW, model Sa5Ux1000mm, machine number: 9553. Grinding length: 1000 mm, grinding diameter: 370 mm. Gsdox Tcvzopfx Aa Isbg

Condition: used, STUDER S 40-2 is a Cylindrical grinder designed for precision, high accuracy and reliability. Working capacities: centre height 175 mm, distance between centres 650 mm, max longitudinal travel 700 mm; wheels Ø400 mm (width 80/40 mm) bore 127 mm; workpiece max 130 kg; hydraulic cross travel 300 mm; wheelhead swivel 180°; table angle 12°. Main specs: wheel speeds 6 steps 1500–2400 t/min (35 m/s); work spindle stepless 60–600 t/min, rotatable 0–90°; wheel motor 3 kW, work spindle motor 1 kW; 3×400 V 50 Hz; total 13 kVA; weight ≈3100 kg; dims 2150×2000×1800 mm. Accessories: 2‑axis DRO, internal grinding attachment, magnetic chuck Ø150 mm, paper filtration, flanges, lamp, balancing arbor, safety device. Achieves tight tolerances; suited to automotive, aerospace, tooling and medical sectors Gedpfxox S N D Ae Aa Ijbg

Condition: ready for operation (used), clamping length: 1,500 mm, Crankshaft grinding machine Robbi model REX 1500, 1500 mm between centers, maximum grinding diameter 520 mm, centers height 260 mm, very well equipped. Gbedox S Dxhepfx Aa Isg

Condition: used, Year of construction: 2020, operating hours: 6,875 h, machine/vehicle number: IntNr231185, EMAG WEISS cylindrical grinding machine EMAG WEISS type W11-CNC / UNIVERSAL CYLINDRICAL GRINDING MACHINE W 11-CNC SL650 Spindle hours: approx. 6,850 hours Power on hours: 20,422 hours This machine is characterized by its 2 in 1 control concept: 100% conventional cylindrical grinding or switching to 100% CNC cylindrical grinding Technical data: • Control: CNC-controlled (depending on year of manufacture Heidenhain, Siemens or Fanuc) Grinding length max. mm 650 / 1,500; in 25.5 / 59 Centre height mm 200 in 8 Grinding diameter outside mm1 / 390 in 0 / 15.5 Max. weight flying MK 4 kg 100 / lb 220.5 Max. workpiece weight between centres kg 250 /lb 551 Feed: X-axis travel mm 380 / 480 /in 15 / 19 Feed: Z-axis travel mm 1,150 / 1,650 in 45.5 / 65 Grinding wheel diameter mm 400 / 500 in 15.5 / 19.5 Rated power (100% ED) kW 9 / 11 hp 12 / 15 Peripheral speed m/s 20 - 50 Machine equipment: • Grinding wheel drive: Powerful Motor for precise grinding results • Tailstock: Adjustable tailstock for different workpiece lengths • Workpiece holder: Chuck or centering points (depending on the application) • Coolant system: Integrated, to avoid overheating and for optimal grinding results • User-friendly interface: Intuitive CNC user interface for easy programming and control • Measuring systems for real-time monitoring and quality assurance • Machine bed Cast bed Karstens base with high static-dynamic rigidity • X-axis High-precision linear guides, ball screw and glass scale • Z-axis V-flat or linear guides, ball screw and glass scale Gedpfjx Sv U Ujx Aa Isbg • Control Touch screen with integrated CNC control based on Windows Dialog programming, DIN programming, program memory. • Technical equipment Electrical cabinet according to VDE with CE mark • Coolant system and extraction system • Paper belt filter system with 250 | Container • Mechanical fume extraction with 1600 m²/3 with control without support foot • Measuring axis for moving to multiple diameters with wide range • Measuring head. Measuring position freely programmable. • Prepare robot interface. • Only provide 10 x l / O without interface plug software and PLC Applications: • Cylindrical external and internal machining • Precision grinding for mechanical engineering, the automotive industry and toolmaking • Production of shafts, bushings, rollers and other rotationally symmetrical workpieces Special features: • High rigidity of the machine body for vibration-free work • CNC control for complex grinding cycles and flexible processing • Adaptation to customer-specific requirements possible Optionally retrofittable Equipment: • Automated loading and unloading systems • Special mounts and special grinding wheel holders Optional grinding wheels available: • See photos The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale! EMAG WEISS Cylindrical Grinding Machine EMAG WEISS Type W11-CNC / UNIVERSAL CIRCULAR GRINDING MACHINE W 11-CNC SL650 Spindle Hours: approximately 6,850 hours Power On Hours: 20,422 hours 2 in 1 control concept characterizes this machine: 100% conventional cylindrical grinding or switch to 100% CNC cylindrical grinding Technical data: - Control: CNC-controlled (Heidenhain, Siemens or Fanuc, depending on year of manufacture) Grinding length max. mm 650 / 1,500 ; in 25.5/59 Center height mm 200 in 8 External grinding Ø mm1 / 390 in 0 / 15.5 max. weight fl

Condition: used, Year of construction: 1989, Studer Type S40-4 CNC Cylindrical Grinder with Studer Siemens Control, Centre Height 225mm, Centre Distance 1600mm, Wheel Head Slide Max Travel 275mm, Marpass E39 Gauge, Wheel Size 400mm x 80mm x 127mm, Speeds 2 100rpm, Filter Mist. S/No. 7234.22 (1989). Country of Origin: Switzerland - Please Note: A known Spindle Chiller Fault Gjdpfjx R S T Dsx Aa Isbg A charge of £750 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Center height 127 mm Distance between centers 1000 mm Grinding wheel 350 x 50 x 127 mm + 300 x 25 x 127 mm Grinding wheel speeds 1'775-2'400 rpm Gedox R R Ndjpfx Aa Iobg Grinding head rotating 190 / 45 ° With internal grinding attachement Misc. accessories MARCELS MASCHINEN AG

Condition: used, total width: 1,500 mm, total length: 2,300 mm, total height: 1,700 mm, Empty weight: 1.500 kg - Documentation available: No - CE certificate present: No - Serial number: 516 - Drive system: Conventional - Power [kW]: 3.5 - Distance between centres [mm]: 600 - Centre height [mm]: 125 - Transport dimensions: 2300mm x 1500mm x 1700mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Godpfxox Ryu As Aa Isbg Lukas van Rossum

Condition: used, Year of construction: 2020, grinding diameter 390 mm Godjx Rn Uqepfx Aa Iebg grinding length 650 mm centre height 200 mm workpiece weight max. 250 kg x-axis 380 mm z-axis 1150 mm sanding disc diameter 400 mm peripheral speed 20-50 m/sec workpiece spindle stepless 1 - 650 U/min tailstock quill taper MT 4 quill stroke 45 mm dia. of quill 50 mm total power requirement 22 kW

Condition: used, 3 flanges for type 600 U – available for sale individually or as a set Gbjdpfx Aox N Rytea Ijg

Condition: used, Year of construction: 2006, grinding diameter 250 mm grinding length 1000 mm Control Kavalir K 51 peripheral speed 25 - 45 m/sec max. workpiece weight between centres 80 kg voltage 400V AC 50 Hz control voltage 24V AC/DC current -Sicherung für Zuleitung 35 A Gbjdpfjx I Sigjx Aa Ijg weight of the machine ca. 3,8 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 1995, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Godpjx Hpz Djfx Aa Iebg Teilüberholte Maschine mit Messprotokoll nach Neumaschinentoleranz KEL-ASSIST für Kelco 90 numerisch gesteuerte B-Achse Innnschleifrinrichtung Dia 80mm Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 300mm Innenschleifspindel HJN 828 hydraulischer Reitstock Mikroverstellung KEL SET Messsystem KEL-POS Marposs

Condition: used, Year of construction: 2020, operating hours: 6,875 h, machine/vehicle number: IntNr231185, EMAG WEISS cylindrical grinding machine EMAG WEISS type W11-CNC / UNIVERSAL CYLINDRICAL GRINDING MACHINE W 11-CNC SL650 Spindle hours: approx. 6,850 hours Gsdpfx Ajx Hh R Dsa Iobg Power on hours: 20,422 hours This machine is characterized by its 2 in 1 control concept: 100% conventional cylindrical grinding or switching to 100% CNC cylindrical grinding Technical data: • Control: CNC-controlled (depending on year of manufacture Heidenhain, Siemens or Fanuc) Grinding length max. mm 650 / 1,500; in 25.5 / 59 Centre height mm 200 in 8 Grinding diameter outside mm1 / 390 in 0 / 15.5 Max. weight flying MK 4 kg 100 / lb 220.5 Max. workpiece weight between centres kg 250 /lb 551 Feed: X-axis travel mm 380 / 480 /in 15 / 19 Feed: Z-axis travel mm 1,150 / 1,650 in 45.5 / 65 Grinding wheel diameter mm 400 / 500 in 15.5 / 19.5 Rated power (100% ED) kW 9 / 11 hp 12 / 15 Peripheral speed m/s 20 - 50 Machine equipment: • Grinding wheel drive: Powerful Motor for precise grinding results • Tailstock: Adjustable tailstock for different workpiece lengths • Workpiece holder: Chuck or centering points (depending on the application) • Coolant system: Integrated, to avoid overheating and for optimal grinding results • User-friendly interface: Intuitive CNC user interface for easy programming and control • Measuring systems for real-time monitoring and quality assurance • Machine bed Cast bed Karstens base with high static-dynamic rigidity • X-axis High-precision linear guides, ball screw and glass scale • Z-axis V-flat or linear guides, ball screw and glass scale • Control Touch screen with integrated CNC control based on Windows Dialog programming, DIN programming, program memory. • Technical equipment Electrical cabinet according to VDE with CE mark • Coolant system and extraction system • Paper belt filter system with 250 | Container • Mechanical fume extraction with 1600 m²/3 with control without support foot • Measuring axis for moving to multiple diameters with wide range • Measuring head. Measuring position freely programmable. • Prepare robot interface. • Only provide 10 x l / O without interface plug software and PLC Applications: • Cylindrical external and internal machining • Precision grinding for mechanical engineering, the automotive industry and toolmaking • Production of shafts, bushings, rollers and other rotationally symmetrical workpieces Special features: • High rigidity of the machine body for vibration-free work • CNC control for complex grinding cycles and flexible processing • Adaptation to customer-specific requirements possible Optionally retrofittable Equipment: • Automated loading and unloading systems • Special mounts and special grinding wheel holders Optional grinding wheels available: • See photos The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale! EMAG WEISS Cylindrical Grinding Machine EMAG WEISS Type W11-CNC / UNIVERSAL CIRCULAR GRINDING MACHINE W 11-CNC SL650 Spindle Hours: approximately 6,850 hours Power On Hours: 20,422 hours 2 in 1 control concept characterizes this machine: 100% conventional cylindrical grinding or switch to 100% CNC cylindrical grinding Technical data: - Control: CNC-controlled (Heidenhain, Siemens or Fanuc, depending on year of manufacture) Grinding length max. mm 650 / 1,500 ; in 25.5/59 Center height mm 200 in 8 External grinding Ø mm1 / 390 in 0 / 15.5 max. weight fl

Condition: repair required (used), Type AS - 900 Machine No. 74054 Gsdjx Hfcwopfx Aa Iebg Centre distance 900 mm Centre height 150 mm Max. grinding wheel 400 x 80 x 127 mm Centre height 150 mm Centre distance 900 mm ..... Condition: The machine cannot be switched on! The following applies to this machine: Condition unknown! Scope of delivery as per attached images ....

Condition: used, Year of construction: 1990, functionality: limited functionality, Internal grinding machine T3i Gedpox Ezidjfx Aa Iobg

Condition: used, Year of construction: 1974, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 8002/6410, drilling depth: 1,000 mm, drill diameter: 30 mm, type of input current: three-phase, spindle motor power: 21 W, table length: 1,000 mm, input voltage: 550 V, mount diameter: 160 mm, number of spindles: 1, drilling capacity: 1,000 mm, quill diameter: 30 mm, Equipment: rotational speed infinitely variable, Deep hole drilling machine for up to 1000 mm and 30 mm diameter, used for drilling aluminium, regularly serviced, includes a significant quantity of drills. Machine is fully operational and in continuous use. Siemens control, Simatic PANEL, documentation available. Godpfx Aajx Ehg Ts Iobg

Condition: used, total width: 1,350 mm, total length: 2,120 mm, total height: 1,500 mm, Empty weight: 2.000 kg - Documentation available: No - CE certificate present: No - Serial number: 25 - Drive system: Conventional - Power [kW]: 3.0 - Distance between centres [mm]: 750 - Centre height [mm]: 150 - Transport dimensions: 2120mm x 1350mm x 1500mm (l x w x h) - Transport weight [kg]: 2000kg Gsdox Ebl Nspfx Aa Iobg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 3021600302, center height: 230 mm, center width: 2,000 mm, grinding diameter: 355 mm, overall weight: 10,000 kg, - Year of manufacture: 2002 - First owner: from our own use and first hand - Fully functional, under power, ready for demonstration - Centre height: 230 mm - Centre distance: 2000 mm - Max. grinding diameter: 355 mm Gbedpfx Aex Aru Aoa Ijg - External grinding wheel, standard: 500x80x203 mm - Surface grinding wheel, standard: 400x40x127 mm - Control: Siemens 840 D - Drive power external grinding spindle: 9 kW - Drive power internal grinding spindle: 2.2 kW - Total connected load: 25 kW - Total weight: 10,000 kg - Machine no.: 3021600302 Net price ex location Luckenwalde (Germany), unloaded, without transport

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: C210068/9002194, grinding length: 750 mm, grinding wheel diameter: 400 mm, total width: 2,750 mm, total length: 1,950 mm, total height: 1,750 mm, grinding diameter: 250 mm, Machine complete with filter unit and documentation. Grinding diameter (maximum workpiece Ø): 250 mm. Centre distance / maximum grinding length: 750 mm. Grinding wheel (max. size): 400 × 40 × 127 mm. Grinding spindle motor power: 5 kW. Grinding wheel speeds: approx. 2140 / 2640 rpm. Workpiece mounting: between centres, tailstock; suitable for external cylindrical grinding. Dimensions (L / W / H, approx.): 2750 mm / 1950 mm / 1750 mm. Machine weight: approx. 3.9 t (≈ 3900 kg). Gbjdpfx Aaoxz Tvxs Ijg

Condition: used, Year of construction: 1999, grinding diameter 300 mm grinding length 500 mm centre height 150 mm digital readout 2 Achs Mitutoyo Ka Counte Gedpfx Ajxzu Aasa Iobg Knoll PF 70 magnetic chuck ja type Schild nicht auffindbar

Condition: good (used), Year of construction: 2006, functionality: fully functional, center height: 100 mm, workpiece weight (max.): 35 kg, grinding length: 500 mm, grinding diameter: 125 mm, overall weight: 1,800 kg, input voltage: 400 V, For sale: 1 used grinding machine. Manufacturer: Knuth Werkzeugmaschinen GmbH. Model: RSM 500. Year of manufacture: 2006. Technical data: Centre height: 100 mm; Max. grinding diameter: 125 mm; Distance between centres: 520 mm; Max. grinding length: 500 mm; Max. workpiece weight: 35 kg; Internal grinding diameter: 10 - 40 mm; Internal grinding depth: 50 mm; Spindle taper: MK4; Tailstock: MK2; Weight: 1,800 kg. Documentation available. The machine can be inspected at our warehouse in 09599 Freiberg. Gbedpsxzrvwsfx Aa Isg

Condition: good (used), grinding length: 1,000 mm, grinding diameter: 350 mm, We are selling our cylindrical grinding machine Kellenberger 1000U Grinding diameter: 350 mm Grinding length: 1000 mm This machine features a reinforced headstock and can be elevated. Remarks: - The price does NOT include any accessories! - Collection by the buyer, ex works. Gbedpfx Aasxzqive Isg - The collection date will be arranged in consultation with the seller. - No warranty - Advance payment (invoice) or cash payment upon collection.

Condition: used, Year of construction: 2000, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Photo of machine already delivered in similar scope: -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Gbedoxzk Niepfx Aa Ijg Paper belt filter

Condition: used, TECHNICAL DETAILS - Distance between centers : 1000 [mm] - Center height : 175 [mm] - Table orientation : 9 [°] - Universal wheelhead - Left grinding wheels dimensions : 400 x 50 x 127 [mm] - Motor power : 3 [kW] Gbodexy S A Ispfx Aa Isg - Spindle speeds : 1500 / 1700 / 2200 - Orientation of grinding wheel holder headstock : 270° (3 x 90 °) - Boring for internal spindle : 90 [mm] - Orientation of part holder headstock : 180 [°] - Spindle speeds : 20 - 400 [rpm] - Spindle internal cone : Morse 5 - Motor power : 0,9 [kW] - Inner cone tailstock : Morse 4 - Tailstock sleeve travel : 30 [mm] - Dimensions : 2860 x 1680 x 1670 [mm] - Machine weight : 2500 [kg] EQUIPMENT - Automatic cycle work (rough part, finishing and reverse) - Hydraulic tail stock - Lubricating tank with paper filter - 1 internal grinding spindle - 1 diamond holder - 2 two-key steady rests - 1 three-key steady rest - 1 set of drive knobs - Various wheel holders

Condition: excellent (used), Year of construction: 1999, grinding length: 1,000 mm, Internal / External spindel Collet device Schaublin with inserts Steady rest 5 - 80 mm Steady rest 3 - 120 mm Coolant system Filtration system Speeds head 1500 / 1700 / 2200  Centre height: 175mm Grinding Ø: 350mm Gedpfx Asxy I Tvsa Isbg Grinding length: 1000mm Grinding stone dimensions:400 x 50 x 127mm Grinding stone speeds: 1500 / 1700 / 2200Rpm Table inclasement: 9° Tailstock: 4Mk Cooling system: Yes Filtration: Yes Length: 2860mm Width: 1680mm Height: 1670mm Weight: 2500kg

Condition: used, Year of construction: 1998, functionality: fully functional, workpiece weight (max.): 150 kg, grinding length: 1,000 mm, grinding wheel diameter: 455 mm, grinding diameter: 300 mm, workpiece weight between centers: 150,000 g, workpiece diameter between centers: 300 mm, grinding wheel width: 75 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 10 rpm, grinding spindle motor power: 7,500 W, overall weight: 5,600 kg, Equipment: rotational speed infinitely variable, The machine is fully operational and can be inspected under power. OKAMOTO Model OGM-3100 P NC Year of manufacture: 1998 Control: Fanuc 18 GCA Maximum swing diameter: 320 mm Maximum distance between centers: 1,000 mm Maximum workpiece diameter to be ground: 300 mm Maximum workpiece weight between centers: 150 kg Grinding wheel: diameter x width x bore: 455 x 75 x 127 mm Wheel speed: stepless Peripheral speed: 45 m/sec Grinding spindle head (X-axis): max. travel 300 mm Swivel angle of workpiece table: not swiveling Workpiece table (Z-axis): travel: 1,150 mm Swivel angle: 0 – 10° Workpiece spindle head: fixed/rotating type Spindle mount: MT 4 Spindle bore diameter: 20 mm Spindle speed: 10 – 500 rpm Swivel angle of grinding spindle: not swiveling Tailstock type with manual fine taper adjustment Quill stroke: 30 mm Mount: MT 4 Grinding wheel drive: 7.5 kW Dimensions/Weight Length x width x height approx. 4,243 x 2,490 x 1,860 mm Machine weight approx. 5,600 kg Standard equipment: - Complete FANUC keyboard with radius compensation for creation of ISO programs - Shop floor programming graphical software for grinding and dressing cycles with teach-in function - GAP eliminator - Shoulder positioning - Lamp Gbodpfxjxy Hvpo Aa Ijg - Documentation - Leveling screws and mounting plates Accessories: - Marposs measuring control Ø 8 – 92 mm - Various flanges - Various grinding wheels - Band filter All information subject to change; intermediate sale reserved. Prices: plus VAT Terms of payment: net, payment before loading