R.Prenneis Möbelwerk GmbH & Co KG

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Panel thickness: 60 mm Edge banding thickness: 3 mm Edging unit Gluing system Edge pressing unit End trimming unit Trimming unit Edge profiling unit Radius profiling unit Rounding unit Rjdpfx Amszat Dnogsu Edge scraping unit Glue scraping unit Brush unit LOOPTEQ O-300 part return system, year of manufacture: 2022 Air cushion table with AirTec! Belt press. Only approximately 2,200 operating hours and approximately 166,000 meters of edge banding processed. Available at the end of July.

Condition: used, BRANDT KDF 430 Edging Machine Redpjzarz Eefx Amgou Pre-milling cutters Replaceable trimming unit Edge gluing with a roller Pneumatic preliminary trimming cutter Pressure rollers Final trimming blades Adjustable top-bottom milling unit R1-R2, motor-driven Corner rounding unit Profile trimming unit Flat trimming unit Polishing unit Max. workpiece height 60mm Max. veneer thickness in roll 3mm Feed rate 8-14m/min Machine length 480cm Machine inspected, ready for operation

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 0-200-03-9040, functionality: fully functional, edge thickness (max.): 20 mm, feed rate X-axis: 18 m/min, year of last overhaul: 2025, The machine underwent a complete overhaul on November 10, 2025, and was fitted with two new adhesive tanks. The machine has been serviced annually; in 2023, the software and computer system were completely replaced. The machine is equipped with the following units: Gluing/pre-coating unit Pressing zone Cutting unit (HL) Milling unit (MFL) Profiling unit (PN) Polishing unit (SM) Gluing system FE-MA-TECH Advanced PUR 2 kg TECHNICAL DETAILS Feed speed: 18 m/min Panel thickness: 10 - 60 mm Edge thickness: 0.3 - 20 mm MACHINE DETAILS Gluing system: FE-MA-TECH Advanced PUR 2 kg Redpfszap H Sox Amgsu

Condition: excellent (used), Year of construction: 2023, We offer this very good Format-4 tempora F600 edgebander, year of construction 2023. If you have any questions or need more information, feel free to send us a message or give us a call. Redpfszak D Sex Amgou Dobrý den, prodame olepovačku Format4 Tempora F600 PUR + Eva. Stroj z roku 2023, nalepeno cca 60km hran. Vybaven glue boxem pro lepení pur technologií. Dále 2x vanicka pro rychlou výměnu barvy lepidla Pur/eva. Bližší info v odkaze zde:

Condition: used, machine/vehicle number: 008627, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Rodpfxezakdfs Amgju Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: good (used), Year of construction: 1999, 0,4-5 mm Workingpiece thickness from to 6-45 mm Total length 4130 mm Feed speed 11 m/min. Weight 1250 kg Rjdpfx Amozafppogju

Condition: excellent (used), EXCELLENT CONDITION Hebrock edge banding machine Model: Top 2000 Rjdpszadx Aofx Amgju Machine description Features - Heating strip for chipboard - Glue container - Pressure roller - Front and rear saws - Top and bottom milling station, radius and straight milling - Machine length: 3100 mm - Weight: 600 kg

Condition: used, Year of construction: 2008, Connected load: 11.5 kW Feed rate: 11 m/min Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Dust extraction diameter: 1x 120 / 2x 100 mm Working height: 950 mm Dimensions: 5860 x 1560 x 2300 mm Rodpfx Aezab Riomgju Weight: approx. 2600 kg Location: Customer

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - Control unit with 15" touch screen - Jointing milling unit with 2 milling heads - Edge feed - GluJet 301 glue application system: 2.3 kW, automatic glue height adjustment, sensor nozzle - Pressure unit: pneumatic - End trimming unit: pneumatic - Diamond cutters left/right with CM technology - Corner copying unit with diamond cutters - Surface scraper - Polishing unit - Extendable workpiece support - Motorized pressure bridge adjustment with NC axis via program control - Extraction hoods for end trimming unit - Multifunction milling unit: MOT 4 - Vertical tracing rollers: pneumatic - Pneumatic tilting device for milling unit MOT 4 - Scraper unit MOT 2 with chip collection box Rsdpfx Amey U R Izegsu - Spray unit for infeed and outfeed area - Minimum workpiece length: 160 mm - Workpiece thickness: 6-60 mm - Edge thickness: 0.4-6 mm - Feed speed: 10 m/min - Total length: 4930 mm - Weight: 1420 kg Availability: short-term Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Edge band thickness: 3 mm Release agent application device Grinding unit Gluing system Edge pressing unit Rsdpfoy U I Eqex Amgeu Edge trimming unit Radius milling unit Rounding unit Edge scraper unit Glue scraper unit Cleaning device Brush unit Approximate weight: 1304 kg Only 21,681 meters of edge banding have been processed Available June 2026

Condition: good (used), Year of construction: 2020, - Used machine - Year of manufacture: 2020 - Edge thickness for rolls: 0.4 - 6 mm - Edge thickness for strips: 0.4 - 6 mm - Edge height max. 60 mm - Workpiece length min. 160 mm - Workpiece width min. 60 mm - Feed rate 10 m/min - Edge trimming unit FG201 with 2 diamond cutters - Edge feeder 1903 - Glue application system Glue-Jet GJ301 Rjdpfjy U E Tljx Amgju - Pressing unit 1912-3, pneumatic - Trimming unit 1918, pneumatic - Milling unit FR 201 with 2 diamond cutters - Corner copying unit 1832 with diamond cutter - Pull-blade unit 1929 - Surface pull blade 1964 - Scraping unit 1940 - Spraying system 1856, infeed and outfeed area - Ex works, free loading

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: AH/005553, functionality: fully functional, SCM Stefani Solution HD Edgebander Heavy-duty industrial edgebanding machine for high-capacity production. Main Specifications: • Panel thickness: max 60 mm • Edge thickness: 0.4 - 3 mm (Solid wood up to [25] mm) • Feed speed: up to 25 m/min • Glue system: [EVA / PUR] • Working Units (Configuration): • Pre-milling unit • Gluing unit with pressure rollers • End-trimming unit • Top/Bottom trimming unit (rough & fine) Rodpfx Amoy Uxxhogeu • Corner rounding unit • Radius edge scraper • Glue scraper • Buffing unit Machine Condition: • Excellent working condition. • Regularly maintained. • Available for inspection and testing under power.

Condition: used, Bimatic edge banding machine Pre-milling cutters Roller glue application Pneumatic pre-trimming cutter Pressure rollers Final trimming cutters R1-R2 top-bottom milling unit Max. part height 50mm Rodpfoy Uxv Hox Amgju Max. edge band thickness in roll 3mm Feed rate 9m/min Power consumption 9kW Machine length 295cm Machine inspected, ready for testing

Condition: ready for operation (used), Year of construction: 2005, Edgebander manufactured in 2005. This IMA Advantage 600 features jointing cutters, a gluing unit for thin and thick edges, and a pressing zone. It includes two trimming units, flush trimming, and profile and surface scrapers for enhanced finishing. If you are looking to get high-quality edge banding capabilities, consider the IMA Advantage 600 machine we have for sale. Contact us for further details. • Equipment/units included: • Jointing cutters • Gluing unit for thin and thick edges • Pressing zone • 2x trimming units • Flush trimming • MFA • Profile scraper • Surface scraper • Buffing Rsdpfey Uxfbsx Amgju • Return mechanism on top pressure

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: AB00007338, functionality: fully functional, power: 3.5 kW (4.76 HP), input current: 8 A, input frequency: 50 Hz, workpiece height (max.): 84 mm, overall weight: 177 kg, SCM Minimax E10 manual edge banding machine manufactured by SCM Group (Italy). The machine is designed for edge banding straight and curved panels using ABS, PVC, and melamine edge banding. Ideal for custom furniture production, reception desks, counters, curved components, and interior fit-out applications. The machine is in very good condition, fully functional, and ready for immediate operation. Specifications: Manufacturer: SCM Group Model: Minimax E10 Rodpfx Amjy Uwq Njgsu Year: 2018 Power supply: 400V / 3 phase Foot pedal control Heated glue pot system Glue application roller Suitable for straight and curved panels Mobile edge tape support arm Compact industrial construction Easy operation and setup Technical data: Edge thickness: 0.4 – 3 mm Edge height: 10 – 84 mm Panel thickness: 8 – 80 mm Minimum inner radius: approx. 25 mm Feed speed: 4 / 8 m/min Installed power: approx. 3.5 kW The machine can be inspected and tested while powered on.

Condition: used, total height: 1,600 mm, total length: 1,500 mm, total width: 800 mm, overall weight: 440 kg, No minimum price – guaranteed sale to the highest bidder! Rodpfx Ajy Uwq Aomgou TECHNICAL DETAILS Trimming unit: yes Panel support guides: yes Number of edge processing units: 1 Processing unit: rough trimming on top and bottom Number of finishing motors: 1 MACHINE DETAILS Model: UF 362 / 2713 Type: Manual sanding machine EQUIPMENT Trimming unit Panel support guides

Condition: excellent (used), CATALOGUE NUMBER 8010 TECHNICAL DATA Equipment: - table - pre-milling - belt feeder - 2 glue tanks: for granules and cartridges - currently, the machine uses hot melt adhesive (granules) Redpfjy Uvmvex Amgeu - guillotine – for pre-cutting veneer - 3 pressure rollers - 2 trimming units with saws for final trimming - 2 milling units for edge shaping (radius cutters) - corner rounding unit - sanding units – for removing excess glue - polishing units - stepless feed rate adjustment 8-18mm - workpiece thickness 6-45mm - minimum workpiece length 180mm - minimum workpiece width 600mm - maximum veneer thickness fed from a roll 3mm - air consumption 6-8 bar - dust extraction nozzle diameter 7x80mm, 1x130mm - dimensions L/W/H 6650x1260x1700mm - weight 1850kg ADVANTAGES – Made in Germany – Spray system – Pre-milling and corner rounding – 2 glue tanks – Includes 4 additional milling cutters – Unpainted – Original technical documentation and CE marking – Very good condition – Used veneer edging machine Net price: 49900 PLN Net price: 11880 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), pre-milling unit glue station for edge banding guillotine pressure rollers unit for precisely trimming the edge unit for milling the excess edge material from the top and bottom of the workpiece corner rounding unit radius edger polishers machine length 450 cm year of manufacture 2016 11 kW Redpfx Aey Uvg Asmgeu 400V

Condition: used, Year of construction: 2008, machine/vehicle number: 50071, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 42 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, height adjustment type: electric, feed rate X-axis: 16 m/min, actuation type: pneumatic, total height: 1,600 mm, total length: 7,200 mm, total width: 1,600 mm, overall weight: 3,700 kg, Equipment: CE marking, documentation/manual, We offer this well maintained IMA Advantage 60 edgebander, year of manufacture 2008. Machine type: Advantage 60 Serial number: 50071 Year of manufacture: 2008 Voltage: 400 V Frequency: 50 Hz Electrical supply: 3 N PE Nominal power: 18 kW Nominal current: 42 A The machine has the following groups: Premilling Blow-off nozzle for removing loose particles Heating unit Rjdjy Um Tmspfx Amgeu Gluing unit End trimming unit MFA unit for milling/corner rounding Profile scrapper Cleaning agent application unit Riepe Flat scrapper Brushes Grooving unit With two interchangeable glue pots If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2016, overall weight: 1,870 kg, Edgebander manufactured in 2016. This BIESSE Akron 1440 A features a pre-milling unit, multifunction milling units, flat trimming, and a corner rounding unit. It also includes automatic glue application, motorized adjustment of units, and a touchscreen control for ease of use. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. • Condition: Used – excellent condition, regularly serviced, fully operational • Availability: Machine can be inspected under power in production; inspection/testing by prior appointment • Configuration/Equipment (integrated): • Pre-milling unit • Multifunction milling units: R1, R2 • Flat trimming • Corner rounding unit (Rondomat) • Radius profile scrapers • Flat scrapers • Polishing brushes • Cleaning liquid application unit • Automatic glue application Rsdpoy Ukixofx Amgou • Motorized adjustment of units • Touchscreen control • IntelliSet system • FAST setting technology • ECO mode • Technical specifications: • Power: 13 kW • Power supply: 380 V, 50 Hz, 3 / N / PE • Full-load current: 24 A • Air pressure requirement: 7 bar • Minimum workpiece width: 50 mm • Note: Transport chain is not included in the sale.

Condition: used, Bimatic prima 4.2 edger Pre-milling cutters Roller-applied adhesive Pneumatic pre-trimmer Pressure rollers Scoring blades for final trimming Top and bottom milling unit R1-R2 Flat edge trimming Rsdjy Uizaspfx Amgeu Max. element height 45mm Max. veneer thickness (in roll) 3mm Feed rate 7m/min Machine length 260cm Machine inspected, ready for operation.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Release agent application device Grinding unit Rodpjy T Sy Ajfx Amgeu Gluing system Edge pressing unit Edging unit Radius milling unit Rounding unit Edge scraping unit Glue scraping unit Cleaning device Brush unit with belt press Approximate weight: 2775 kg Only 1488 operating hours Available September 2026

Condition: used, machine/vehicle number: 008517, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Rodpfoy T Hpfex Amgju Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), HOLZ-HER Auriga 1308 XL edge banding machine - used PC control with screen, touchscreen, swiveling control panel, program memory, automatic adjustment of pressure beams, feed via transport chain, extendable workpiece support, diamond trimming cutter for both forward and reverse rotation, strip magazine, standby function, Glu Jet cartridge system, cartridge system with sensing nozzle, use of PUR adhesives possible, pressure unit with driven roller, pneumatic control of the pressure unit, miter saw with 2 HF motors, miter saw pneumatically swiveling, flush/radius milling unit, motorized positioning control for milling unit, milling tools with diamond coating, air nozzle on the milling unit, Rodpfx Amjy T D N Aogou corner copying unit with diamond-coated cutter, air nozzle on the radius drawing blade, flat drawing blade, air nozzle on the flat drawing blade ----- Technical Data ----- Edge thickness, roll material: 3 mm, edge thickness, strip material: 5 mm, workpiece thickness: 60 mm, min. workpiece length: 160 mm, feed speed: 10 m/min., distance between workpiece supports: 480 mm, support plate Ø for edge material: 800 mm, saw blade for roll material up to: 3 mm, heating time: 3.5 min., power of trimming cutter: 0.8/1.2 kW, power of miter saw: 2x0.45 kW, power of milling station: 2x0.65 kW, power of corner copying: 0.3 kW, power of edging: 2x0.09 kW, suction nozzle Ø for trimming cutter unit: 2x80 mm, suction nozzle Ø for miter saw: 2x70 mm, suction nozzle Ø for milling unit: 100 mm, suction nozzle Ø for drawing blade unit: 120 mm, compressed air connection: 6 bar, overall length: 5,000 mm, dimensions (L x W x H): 5,000 x 1,250 x 1,720 mm, weight: 1,300 kg Quality Information: - all settings checked - adjusted according to manufacturer's specifications - new heater - cartridge system checked for leaks - complete basic inspection - complete basic cleaning - electrical system checked - pneumatics checked - ready for immediate use

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026! The machine has the following configuration: Grooving cutter head 1802 Motor power: 2 x 2.0 kW 1. Cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for grooving cutter head 2. Cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for grooving cutter head Edge feeder 1901 SYNCHRO (fully automatic) Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Storage compartment for 14 cartridges (1.4 kg) GluJet collection container Pressure unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Multi-function cutter head 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Profile cutter head 1833 MOT4 1. Cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2. Cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Scraping blade unit 1929 MOT4 Carbide indexable inserts for scraping blade holder R = 2 mm (2 pcs. required) Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Rodpfxey Tw Edj Amgju Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - touch probe vertical top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system