Asian micronics Deutschland GmbH

Condition: used, Year of construction: 2021, operating hours: 7,600 h, turning length: 210 mm, spindle speed (max.): 12,000 rpm, overall weight: 3,700 kg, total width: 1,400 mm, total length: 2,300 mm, total height: 2,000 mm, bar diameter (max.): 20 mm, Equipment: documentation/manual, Technical details: - Used WECO S206E-II - Operating hours: 7,600 - Control: Fanuc - Bar capacity: Ø 3 mm up to max. Ø 20 mm - Maximum machining length: 210 mm - Main spindle / sub-spindle drive power: 3.7 kW / 2.2 kW Fpodpfx Afexmigkspon - Spindle speed: 12,000 rpm Further details can be found in the PDF data sheet. The machine is sold with the following equipment: - IEMCA Smart 320 bar feeder - Chip conveyor - Fire extinguishing system Kraft & Bauer - Thread whirling unit The machine is in very good condition and can be inspected under power by appointment.

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr230381, used CNC Tsugami HS2075AX with B-axis, year of manufacture 2012 Operating hours: 7,200 Control: Fanuc 31i-A Maximum machining length: 250 mm Number of controlled axes: 7 (up to 5-axis simultaneous machining) B-axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Fpjdpfxsxl U Epj Afpsn Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: available on both main and counter spindle Number of linear tool carriers: 2 Total number of tools: 35 Dimensions (LxWxH): 2,110 x 1,200 x 1,885 mm Weight: 3,300 kg Convertible between long and short turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear turret with Y-axis Cross-drilling on rear side Chip conveyor Fire suppression system FMB Minimag 20 bar feeder, year 2012 The machine can be inspected under power by prior arrangement. Technical data and information are subject to change and error; prior sale reserved.

Condition: used, Year of construction: 2001, machine/vehicle number: IntNr230983, CNC sliding headstock lathe Citizen L520, year 2001 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazine Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! CNC sliding headstock lathe Citizen L520, year 2001 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, FMB Turbo 3-26 loading magazine Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight : 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight : 850 [kg] Fpedpfx Afjxl U A Uspen The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 1997, machine/vehicle number: IntNr230982, used CNC long lathe Citizen L520, year of manufacture 1997 Control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar diameter max. 20 mm, Turning length max. 205 mm, Main spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Counter spindle, speed max. 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), Parts conveyor belt, Loading magazine FMB Turbo 3-26 Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight: 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight: 850 [kg] The machine can be inspected by appointment. Subject to changes and errors in the technical data and information and prior sale! CNC sliding headstock lathe Citizen L520, year 1997 control, Cincom Mitsubishi Meldas, 7 axes (X1/Z1/Y1/C1/X2/Z2/C2, Bar Ø max. 20 mm, turning length max. 205 mm, Main spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Counter spindle, max. speed 10,000 rpm, C-axis 0.001 degrees, Tool holder for a total of 18 tools (linear tool holder, front attachment, rear machining), parts conveyor belt, Fsdjxl U A Ispfx Afpjpn FMB Turbo 3-26 loading magazines Machine dimensions (LxWxH): 2540x1450x1850 [mm] Machine weight: 1750 [kg] Loading magazine dimensions (LxWxH): 3900x900x1450 [mm] Machine weight: 850 [kg] The machine can be inspected by appointment. Subject to changes and errors in the technical data and information as well as before sale!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: K00447, Citizen K16 VIP – Swiss-Type CNC Sliding Headstock Lathe General Information: • Year of manufacture: 11/2006 • Serial number: K00447 • Manufacturer: Citizen Machinery Co., Ltd. (Miyota Nagano, Japan) • Machine weight: 1,950 kg Overall Dimensions: • Width: 1,610 mm • Depth: 1,850 mm • Height: 1,050 mm Technical Specifications: • Max. bar diameter: 16 mm • Max. turning length: 200 mm • Main spindle speed: 15,000 rpm (2.2 / 3.7 kW) • Sub-spindle speed: 10,000 rpm (0.55 / 1.1 kW) • Control: Fanuc Series 31i • Number of axes: X1, Y1, Z1, Z2, C1, C2 • Full C-axis on both spindles • 20 bar high-pressure pump, dual channel Tooling Configuration: Front Tool Post: • T1–T5 – stationary tools • T11–T14 – driven tools (radial or axial) Tool Holder Block: • T21–T24 – stationary tools for main spindle operations • T31–T34 – stationary tools for sub-spindle operations Equipment Included: • IEMCA Genius 118 Type 37 LL bar feeder (year 2007, serial no. 020704BA02) • Set of guide bushings for machine and bar feeder • Turning tool holders and driven tool holders • Automatic fire extinguisher (fire protection system with activation sensor) Fpjdpfoxl Tl Iox Afpjn • 20 bar high-pressure pump / 2 channels Technical Condition: The machine is in very good technical condition, fully operational and ready for immediate use. Regularly serviced and used in precision manufacturing. Additional Information: • Nameplate: model K16 VIP, serial no. K00447, year of manufacture 11/2006, weight 1,950 kg. • Machine can be demonstrated under power.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: K00446, General data: • Year of manufacture: 11/2006 • Serial number: K00446 • Manufacturer: Citizen Machinery Co., Ltd. (Miyota Nagano, Japan) • Machine weight: 1,950 kg Overall dimensions: • Width: 1,610 mm • Depth: 1,850 mm • Height: 1,050 mm Technical specifications: • Max. bar diameter: 16 mm • Max. turning length: 200 mm • Main spindle speed: 15,000 rpm (2.2 / 3.7 kW) • Sub-spindle speed: 10,000 rpm (0.55 / 1.1 kW) • Control: Fanuc Series 31i • Number of axes: X1, Y1, Z1, Z2, C1, C2 • Full C axis on both spindles • High-pressure pump 20 bar, 2-channel Tool configuration: Front tool post: • T1–T5 – fixed tools • T11–T14 – driven tools (radial or axial) Tool holder: • T21–T24 – fixed tools for main spindle • T31–T34 – fixed tools for sub-spindle Fsdpfx Afsxl Tkqopspn Equipment: • IEMCA Genius 118 Type 37 LL bar feeder (year of manufacture 2007, serial no. 020704BA04) • Guide bushings (complete set) • Fixed and driven tooling • High-pressure pump 20 bar / 2 channels Technical condition: The machine is in very good technical condition, fully functional and ready for operation. Regularly serviced and used in precision production. Additional information: • Nameplate: type K16 VIP, serial no. K00446, production date 11/2006, weight 1,950 kg. • Possibility of machine demonstration under power.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Fanuc control, turret with Y-axis and AGW, FMB bar feeder, chip conveyor, tool holders, including driven ones. Fedpfjxl Tkkex Afpepn

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: P10243, Citizen CINCOM M12 – Swiss-Type Sliding Headstock Lathe Year of manufacture (machine): 2000 Year of manufacture (bar feeder): 2009 Technical Data: • Max. bar diameter: 12 mm • Max. turning length: 200 mm • Main spindle speed: 12,000 rpm • Spindle power: 2.2 kW • Number of axes: X1, Y1, Z1, X2, Z2, X3, Z3, C1, C2 Fedjxl Tigepfx Afpjpn • Control: CNC Cincom / Mitsubishi M6 • Full C-axis on both spindles Tool Configuration: Gang tool post: • T1–T5 – fixed tools • T6–T8 – driven tools (holders included) Turret: • T20–T29 – fixed or driven tools, multiple tools per station possible • No driven tool holders currently installed on the turret Backspindle tool post: • T41–T43 – fixed tools, no possibility of mounting driven tools Equipment: • LNS Express 332 bar feeder (year 2009) • Guide bushes • Set of static and driven tool holders Technical Condition: The machine is in very good technical condition, recently serviced, fully operational, and ready for commissioning. Additional Information: • Nameplate: Citizen Watch Co., Ltd., type M-12, no. M212/0257, weight 2,580 kg, S/N P10243. • Complete technical documentation and the possibility to demonstrate the machine under power.

Condition: used, Year of construction: 2000, functionality: limited functionality, Manufacturer: STAR Type: SR-20 Year of manufacture: 2000 with: FANUC 18i-TB control, powered tools (main side), synchron spindle, back side machining (motor defective), C-axis, Fsdpfx Afjxl Ridepopn chip conveyor, oil mist extractor, fire extinguishing system, bar loader magazine FMB

Condition: excellent (used), Year of construction: 2022, operating hours: 1,700 h, functionality: fully functional, machine/vehicle number: 13839, spindle motor power: 2,200 W, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, overall weight: 1,750 kg, Commissioning: 17.04.2023 Operating hours: approx. 1,700 h The machine is currently running in production and can be inspected under power. The machine operates with cutting oil. Almost exclusively tool steel has been processed. Fpedpfsxlzpnjx Afpon The machine is being sold including FMB turbo 3-26 bar feeder.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: P10037, Citizen CINCOM M12 – Swiss-type Sliding Headstock Automatic Lathe Machine year of manufacture: 1999 Bar feeder year of manufacture: 2009 Technical Data: • Max. bar diameter: 12 mm • Max. turning length: 200 mm • Main spindle speed: 12,000 rpm • Spindle power: 2.2 kW • Number of axes: X1, Y1, Z1, X2, Z2, X3, Z3, C1, C2 • CNC control: Cincom / Mitsubishi M6 • Full C-axis on both main and sub spindle Tool Configuration: Gang Tool Post: • T1–T5 – fixed tools • T6–T8 – driven tools (holders included) Turret: • T20–T29 – fixed or driven tools (more than one tool can be mounted per station) • No driven tool holders for the turret Backspindle Tool Post: • T41–T43 – fixed tools only, no provision for driven tools Equipment: • LNS Tryton 112 bar feeder Fedpfoxlqq Ijx Afpepn • Guide bushes • Set of fixed and driven tool holders Technical Condition: Machine in very good condition, mechanically and electrically fully functional, ready for operation. Additional Information: • Machine can be demonstrated under power. • Complete technical documentation available.

Condition: ready for operation (used), Year of construction: 2021, Main Drive Number of spindles 2 Spindle speed range 6500 Spindle bore 34 mm Number of axis 9 This 9-axis Hanwha XDI32-N was manufactured in 2021, featuring a dual spindle system with a maximum speed of 6,500 rpm and power of 2.2/5.5 kW each. It supports a maximum work diameter of 32 mm and includes a 315-liter cooling tank. Ideal for precision Swiss-type turning, this machine ensures efficient and reliable performance. If you are looking to get high-quality turning capabilities, consider the Hanwha XDI32-N machine we have for sale. Contact us for more information. Application Types Fsdpfxsxlllmj Afpopn Turning

Condition: ready for operation (used), Year of construction: 2010, bar material dia. 32 mm spindle passage 36 mm turning length 320 mm turning speeds 200-8000 U/min Back spindle: 32 mm turning length 600 mm Back spindle: 200 - 8000 UpM rapid speed x1 = 32 m/min rapid speed Y1+Z1+X2+Z2 = 45 m/min control Mitsubishi M70 Number of axles 5+2x C Achse 7 St. Number of working hours 119000 h spindle motor 7,5/5,5 kW weight of the machine ca. 3,5 + FMB t dimensions of the machine ca. 2,5 x 1,2 x 1,82 plus FMB m CNC Swiss-Type Lathe Citizen A32-VII (R) with FMB Turbo 3-36 3200 Var.C loading magazine. Sold due to restructuring. Machine with 7 axes (X1, Y1, Z1, X2, Z2, C1, C2) in the main spindle version on the right, vertical holder for 4 driven turning tools + 3 parting tools and + 4 drilling tools. Tool holder for the rear side with 5 stations - see sketch Figure 10. Counter (pick-off) spindle. Simultaneous machining. The machine was regularly serviced by Citizen Europe, and wear parts were last replaced in June 2025. The fire protection system was replaced in June 2025, and the bearings were replaced in June 2024. Equipment: Collet chuck for spindle + pick-off spindle / Synchronously driven guide bushing / Drive unit for guide bushing / Workpiece ejection device / Cross-machining drive unit including 4 spindles / Door lock / Pick-off spindle / Parts receiving basket + conveyor belt / Pneumatic unit for air sealing / Interior work light / 3-color warning lights / Parting tool breakage detection / COMBISTREAM high-pressure coolant system + chip conveyor, 8 outlets, 130 bar / Fpjdpfsxlkwuox Afpjn 4-way driven tool for back machining / "Long parts" option 600 mm with parts container, guide tube, and spindle nut / Loading magazine with various material guides (7, 12, 20, 36), adapters, telescopic tubes and inserts / CO2 fire extinguishing system with FB 703 drilling system control system including flame and thermal maximum detector Manual release. Features of the CINCOM SYSTEM M70PLC CNC control system: • Multi-axis CNC system for simultaneous or individual machining / • Cutting radius compensation / • Multiple cycle repetitions / • Deep hole drilling cycle / • Constant cutting speed / • Chamfer and radii insertion / • Constant cutting speed of the pick-up spindle / • Thread chamfering on the pick-up spindle • Main spindle C-axis • Pick-up spindle C-axis • Main and pick-up spindle synchronization / • Synchronous tapping on the main and pick-up spindles as well as with the driven tools / • Synchronous thread cutting on the main and pick-up spindles / • Geometric function / • Collision detection / • 8.4" color liquid crystal display (LCD) /

Condition: used, Year of construction: 2003, spindle speed (max.): 10,000 rpm, overall weight: 1,750 kg, bar passage: 16 mm, total height: 2,200 mm, bar diameter (max.): 16 mm, controller manufacturer: CINCON, controller model: M6C, number of spindles: 2, space requirement length: 3,300 mm, space requirement width: 1,500 mm, CONTROLS .. CNC controls CINCON M6C BASIC FUNCTIONS .. number of spindles: 2 .. live positions: yes Fodpexlh A Uofx Afpspn WORKING RANGE TURNING .. bar diameter (max): 16 mm MAIN SPINDLE .. spindle revolutions (max): 10000 /min COUNTER SPINDLE .. spindle revolutions (max): 10000 /min X/Z SLIDE .. - rotation speeds (max): 5000 /min ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 3300 mm .. space requirements -front/back-: 1500 mm .. total height: 2200 mm .. total weight approx.: 1750 kg ATTACHMENTS (TURNING) .. bar feeder: yes .. bar magazine: yes fire extinguisher Siemens, Detector tool breakage Drill holder HSP. defect - X 2 amplifiers Sale without LNS bar feeder (optional)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: Traub TX8i-S, number of slots in tool magazine: 12, Equipment: chip conveyor, TECHNICAL DETAILS Bar capacity: 26 / 32 mm Max. main spindle speed: up to 8,000 rpm Axes: X1 / Y1 / Z1, C-axis integrated in main spindle Turret: 1 Tool stations: 12 Drive power: 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) MACHINE DETAILS Control: Traub TX8i-S Dimensions & Weight Fpsdpfoxlfk Nox Afpen Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Machine weight: approx. 4,000 - 4,200 kg EQUIPMENT Chip conveyor: hinge belt, discharge height approx. 950 mm

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 135 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 16 mm, counter spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 16, The machine is offered with an Iemca Elite 112/32 bar feeder! TECHNICAL DETAILS Machining Main spindle max. bar diameter: 16 mm Max. machining length without re-gripping: 135 mm Main spindle max. drilling diameter: 6 mm Main spindle max. thread diameter: M6 Sub spindle max. bar diameter: 16 mm Sub spindle max. drilling diameter: 5 mm Sub spindle max. thread diameter: M3 Spindles Main spindle speed: 200–8,000 rpm Sub spindle speed: 200–6,000 rpm Main spindle C-axis indexing: 1° Rapid traverse Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tools Driven tool speed: 200–4,500 rpm Max. number of tool stations: 16 Tool holder: 10 × 10 mm MACHINE DETAILS Drive capacity Fsdpfx Aexlffyjfpspn Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical connection Operating voltage: 200 V Frequency: 50 Hz Phases: 3 Main transformer input voltage: 400 V Main transformer output voltage: 200 V Connected load: 5.2 kVA Pneumatic connection Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine data Dimensions: 1,590 × 837 × 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control Control type: CNC path control Fanuc 0i-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input modes: incremental and absolute Interface: RS232 Spindle synchronization: main and sub spindle EQUIPMENT Work area lighting Ejection and unloading device Coolant tank and central lubrication Door interlock Parts catcher and workpiece container 5 turning tool holders 10 × 10 mm Coolant system with movable jet arms Power clamping system for main and pick-off spindle

Condition: good (used), Year of construction: 2001, Maier ML 26-D Control: Fanuc 16i-T Year of manufacture: 2001 Serial number: 01156 Weight: approx. 3500 kg Accessories: Standard tooling package, manuals, wiring diagram, bar feeder Iemca Boss 432R/32, Müller high-pressure unit 9 axes (X1 Z1 Y1 C1 – X2 Z2 C2 – X3 Z3) Main spindle, bar capacity: 26 mm Max. machining length: 220 mm Travel: 220 mm Spindle speed: 8000 rpm Spindle drive power: 7.5 kW C-axis resolution: 0.001° Counter spindle, bar capacity: 20 mm Spindle speed: 8000 rpm Spindle drive power: 7.5 kW C-axis resolution: 0.001° Front tool station: Number of tools: 9 / driven: 6 Rear tool station: Number of tools: 4 / driven: 4 Tool holder: Number of turning tools: 5 Fodpfx Aexk Tyvofpspn

Condition: used, Year of construction: 2003, machine/vehicle number: IntNr230334, Year of manufacture: 2003 (0450) FANUC 16i-T CNC control with 9 axes 9 axes (X / C1 / Y / E / B / A / X / C2) Max. bar diameter: 13 mm Max. turning length: 205 mm Fpsdjxiwywepfx Afpsn Main spindle, max. speed: 12,000 rpm, C-axis Sub-spindle with collet chuck, max. speed: 12,000 rpm, C-axis 4-position tool holder 3 cross-drilling units Turret with 8 stations Various additional tool holders, tailstocks Kraft & Bauer fire extinguishing system Parts conveyor belt Operation/programming/electrical/spare parts manuals Machine operating tools Up to 29 turning tools and up to 19 driven tools possible Connected load: 9.0 kVA Tank capacity: 170 L Bar feeder: FMB Turbo 2-16 /3200/A / for Ø2–Ø20 mm Machine coolant: oil Machine dimensions: approx. 2700 x 1400 x 1700 mm Machine weight: approx. 1700 kg Bar feeder dimensions: approx. 4300 x 600 x 1800 mm Bar feeder weight: approx. 700 kg Peripherals & accessories dimensions: approx. 1200 x 800 x 1000 mm Peripherals & accessories weight: approx. 200 kg The machine can be inspected live under power by appointment. Technical data and information are subject to change and error. Subject to prior sale!

Condition: used, Year of construction: 2019, machine/vehicle number: IntNr231109, Technical data: first-class condition, only approx. 9000 operating hours Fpedpsxiwmkjfx Afpsn Fanuc, high-performance CNC control series 31i-B5, 3-channel control, 3 turrets, 12 CNC axes, (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3), Rapid traverse speed 30 mm/min, Bar diameter max. 38 mm, Turning length max. 350 mm, Main spindle, max. speed 7,000 rpm, C-axis 0.001 degrees, Main spindle drive power 11 kW Counter spindle speed max. 7,000 rpm, C-axis 0.001 degrees, Counter spindle drive power 7.5 kW Turret Speed max. 5,700 rpm, (with corresponding tool holder also higher) Turret drive power 4 kW Tool holder stations for a total of 30 (10 per turret) (prepared for internally cooled tools) Tool holder set, (non-driven) Guide bushing unit (pull system, JBS) Oil cooler unit High-pressure conveyor (with integrated high-pressure unit) type Müller combistream CS 3 Coolant: Oil Weight: 6.25 tons Dimensions: (LxWxH) 3477x1860x1865 mm The machine can be inspected under power by appointment. Changes and errors in the technical data and information as well as prior sale reserved! Technical data: first-class condition, only approx. 9000 operating hours Fanuc, high performance CNC control series 31i-B5, 3-channel-control, 3 turrets, 12 CNC axes, (X1/Z1/Y1/C1/X2/Y2/YA2/C2/X3/Z3/Y3), rapid traverse speed 30 mm/min, bar diameter max. 38 mm, turning length max. 350 mm, main spindle, speed max. 7,000 rpm, C-axis 0.001 deg, main spindle drive power 11 kW Counter spindle speed max. 7,000 rpm, C-axis 0.001 deg, counter spindle drive power 7.5 kW Turret speed max. 5,700 rpm, (with appropriate tool holder also higher) turret drive power 4 kW Tool holder stations for a total of 30 (10 per turret) (prepared for internally cooled tools) Tool holder set, (non-driven) Guide bushing unit (tension system, JBS) Oil cooler unit High-pressure conveyor (with integrated high-pressure unit) type Müller combistream CS 3 coolant application: oil Weight: 6,25 to Dimensions: (LxWxH) 3477x1860x1865 mm The machine can be inspected under power by appointment. Changes and errors in the technical data and information and subject to prior sale!

Condition: used, Year of construction: 2015, operating hours: 26,000 h, machine/vehicle number: IntNr231348, STAR SV-38R, year 2015, IntNr231348 FANUC 31i-B5 CNC control with 11 axes C-axis on main and sub-spindle Operating hours: 26,000 Machining time: 9,000 Main spindle: Max. speed: 7,000 rpm Spindle stroke: 350 mm Motor power: 7.5 kW continuous / 11 kW (10 min / 25% duty cycle) Sub-spindle: Speed up to 7,000 rpm, with C-axis Power: 5.5 kW continuous / 7.5 kW (10 min / 40% duty cycle) Cutting tool breakage monitoring Mechanical workpiece ejector Parts ejector monitoring Blow-out device for sub-spindle Fpedjxiwfaopfx Afpsn Workpiece catcher Workpiece conveyor for discharge Extensive accessories: Hinged belt conveyor Small fire extinguishing system by Kraft und Bauer, incl. CO2 agent container Knoll high-pressure coolant system FMB Turbo 5-55 /3200 ‘A’ bar feeder The machine can be inspected under power by prior appointment. Technical data, specifications and availability subject to change and prior sale.

Condition: used, Year of construction: 2011, bar capacity 18 mm travel -x axis 120 mm travel -z axis 250 mm Fpedpexh S H Ajfx Afpsn control TRAUB SYSTEM TX 8i-s --- upper turret --- - - - turret stations 8 --- lower turret --- - - - turret stations 7 Swiss type- and fixed head lath | TRAUB - TNL 18 equipped with bar feeder, chip conveyor, fire protection system, high-pressure pump (50 bar) An extensive tool package is in the Scope of delivery includes. The machine is in a well-maintained condition and can be inspected under power at any time. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNL18 | TNL 18 | TNL-18

Condition: used, Year of construction: 2011, bar capacity 18 mm travel -x axis 120 mm travel -z axis 250 mm control TRAUB SYSTEM TX 8i-s --- upper turret --- - - - turret stations 8 --- lower turret --- - - - turret stations 7 Swiss type- and fixed head lath | TRAUB - TNL 18 equipped with bar feeder, chip conveyor, fire protection system, high-pressure pump (50 bar) The machine has approx. 28.900 H spindle hours. Fpjdpexh S Hpofx Afpjn An extensive tool package is in the Scope of delivery includes. The machine is in a well-maintained condition and can be inspected under power at any time. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNL18 | TNL 18 | TNL-18

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 1675 Measurements depth 2020 Measurements height 2020 Machine weight 3400 Fpodoxg Umiopfx Afpjn Control Unit Brand FANUC Model 32i-B CNC Main Drive Spindle speed range 8000 Number of axis 6 This 6-axis TSUGAMI HS32 swiss type turning machine was manufactured in 2011. It features a maximum bar capacity of 32 mm and is equipped with a Fanuc 32i-B CNC control system. The main and sub-spindle speeds reach up to 8,000 rpm, with live tool speed up to 5,000 rpm. Consider the opportunity to buy this TSUGAMI HS32 swiss type turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1270 mm Measurements depth 2630 mm Measurements height 1580 mm Machine weight 2500 kg Fsdpexgv U Isfx Afpjpn Control Unit Brand FANUC Model na Main Drive Spindle speed range 5000 rpm Spindle motor power 7.5 kW Number of axis 6 This 6-axis ERGOMAT TBC-42 Swiss Turning Machine was manufactured in 2012. It features a maximum material diameter of 42 mm and a spindle speed up to 5000 rpm. Equipped with a Fanuc 18i-TB Dual Path control, it offers precision and versatility with 8 tool positions and rapid feed rates up to 30 m/min. If you are looking to get high-quality turning capabilities consider the ERGOMAT TBC-42 machine we have for tact us for more information. Application Types Turning

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AC0171, Max. bar diameter: 20 mm Max. machining length: 165 mm Max. part-off length: 100 mm Spindle speed: 8,000 rpm Pjbrexb A Dfo S Tlr Ujrb Max. bar diameter, sub-spindle: 20 mm Max. sub-spindle speed: 8,000 rpm Number of available tools: 21 Turning tools, multiple tool holder: 6 Driven tools for cross machining: 3 Fsdpfjxgpunox Afpjpn Front drilling tool: 4 Rear drilling tool: 8 Driven tool speed: 8,000 rpm Bar feeder FMB turbo 3-26