Otomat Makina İth. İhr. San. Tic. Ltd. Şti.

Condition: as good as new (ex-display), Year of construction: 2024, New and unused, 340mm turning diameter, 570mm turning length, Y axis +/- 41mm, Redsziavhjpfx Anpow 400mm swing, 65mm bar capacity, spindle speed 4,500rpm, 15 station turret, 11/15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, FANUC-i control, tailstock, coolant, tool setter, swarf conveyor, parts catcher, 3 jaw chuck, tooling,

Condition: ready for operation (used), Year of construction: 1997, turning length: 410 mm, turning diameter: 516 mm, spindle speed (max.): 4,500 rpm, bar diameter (max.): 51 mm, CNC MSC 803 10-position turret Maximum spindle speed: 4500 RPM Spindle bore: 51 mm Maximum diameter swing: 516 mm Rsdjzh Uu Aepfx Anpew Set of collets and chuck

Condition: used, Year of construction: 2005, functionality: fully functional, Puma MX2500ST turning center. Rjdpozh Rhfjfx Anpsw

Condition: excellent (used), Mazak Quickturn Nexus 300 CNC Lathe Capacity Maximum bar size diameter - 77mm Maximum cutting dia - 420mm Maximum swing - 680mm Spindle Main spindle speed : Max 4,000rpm / Min 35rpm Main spindle workpiece weight ( including chuck) 450kg Spindle bore - 88mm Spindle centre line - 1080mm Spinel nose - A2-8 Axis Travel X axis 225mm Z axis 680mm Cutting feedrates (x axis max) 8m/min (z axis max ) 8m/min Rapid traverse Redpfx Anozh Ndxopsw X axis (max) 30m/min Z axis (max) 25m/min Turret Toolsize turning tool shank - 25 x 25 Turret indexing time 1/2 full turn 0.8 secs single step 0.2 secs No of stations on drum turret 12 Tailstock (not chucker) Body movement motor driven Body stroke 645mm Mounting taper No5 Standard centre supplied No5 Chucking systems Chuck cylinder S2078-15Y Chuck Type B210A815X Jaw stroke on diameter 8.8mm Main chuck diameter 10" Mazatrol PC Fusion CNC 640T Nexus CNC Control

Condition: used, Machine Type Multi-Tasking CNC Turning & Milling Center Chuck Size 15" Main / 15" Sub Swing Over Bed 1,000 mm Swing Over Saddle 700 mm Maximum Turning Diameter Ø760 mm Maximum Turning Length 1,540 mm Maximum Bar Capacity Ø102 mm Main Spindle Speed 3,000 rpm Sub Spindle Speed 3,000 rpm Main Spindle Motor 30 kW Rodpfx Anszh H H Ropow Sub Spindle Motor 30 kW Milling Spindle Speed 12,000 rpm Milling Spindle Motor 22 kW Milling Spindle Taper Capto C6 B-Axis Rotation ±120° Y-Axis Travel ±150 mm (300 mm Total) X1-Axis Travel 695 mm Z1-Axis Travel 1,585 mm X2-Axis Travel 235 mm Z2-Axis Travel 1,540 mm Tool Magazine Capacity 40 Tools C-Axis Main & Sub Spindle Rapid Traverse 48 m/min CNC Control FANUC 31i Key Features ✔️ High-Performance Multi-Tasking CNC Turning & Milling Center ✔️ Simultaneous Turning, Milling, Drilling and Tapping in a Single Setup ✔️ Powerful 12,000 rpm Integrated Milling Spindle ✔️ High-Rigidity B-Axis Milling Head (±120°) ✔️ Main & Sub Spindles with Full C-Axis Control ✔️ Large Y-Axis Travel (±150 mm) ✔️ 40-Tool Automatic Tool Changer (ATC) ✔️ Capto C6 Tooling System ✔️ Heavy-Duty Box Guideway Design ✔️ Excellent Surface Finish and High Machining Accuracy ✔️ Reduced Setup Time and Increased Productivity ✔️ Ideal for Complex Parts Requiring Complete Machining

Condition: good (used), Year of construction: 2015, Ref. -No.: 10652 Manufacturer: DMG MORI Type: NT 4300 DCG 1000 S Year of construction: 2015 Type of control: CNC Control: Fanuc F31iA5 Storage location: Halberstadt Country of origin: Japan Machine-No.: NT430XXXX Turning Length: 983 mm Spindle power: 18,5 / 11 kW Travel -X Axis: 750 mm Travel -Y Axis: +-210 mm Travel -Z Axis: 1220 mm Max. machining diameter: 660 mm Number of tool stations: 100 pc Tool configuration: CAPTO C6 Tool holder: 70 pc Further information: - Control and Measurement Systems - Control computer: Fanuc F31iA5 - Tool measurement system: included - Included equipment - Internal tool cooling system + high-pressure pump - Conveyor belt - Controller - Foot switches for main and sub-spindles - Tool measurement arm - Machine manuals Rodozh Hl Tspfx Anpow The machine can be inspected while powered on by prior arrangement.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, Vertical Milling Machine Condition: very good, operational Ready for immediate delivery Rodpfszh Hi Sox Anpow Machinery runs without any problems. The machine is operational, fully functional, in excellent condition.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,326 h, travel distance X-axis: 580 mm, travel distance Z-axis: 905 mm, controller manufacturer: OKUMA, controller model: OSP-P300S, swivel angle B-axis (min.): -29 °, swivel angle B-axis (max.): 210 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis Okuma Multus B250II MW was manufactured in 2022. It features a maximum turning diameter of 400 mm and an extensive optional tool package, making it suitable for high-precision single-part, small-batch, and series production. The machine is designed for complete machining of complex workpieces in a single setup. If you are looking to get high-quality turning and milling capabilities, consider the Okuma Multus B250II MW turn-mill centre we have for sale. Contact us for further details. • Tool Interface: HSK-A63 • HSK-A63 Milling Spindle • Automatic Tool Changer: Yes • Driven Tools: Yes • Bar Feeder: SAMSYS Multi 3000 • Chucks: 2 × Hainbuch TOPlus 65 • Additional Chucks: 2 × Three-Jaw Chucks • Tool Package: Extensive (Optional) • X-Axis Travel: 580 mm • Y-Axis Travel: ±100 mm • Z-Axis Travel: 905 mm • B-Axis: -30° to +210° • C-Axis: 360° • Maximum Turning Diameter: 400 mm • Voltage: 400 V • Phase: 3 • Frequency: 50 Hz • Maximum Power Consumption: 39 kVA Redpfxozh Ebgj Anpew • Total Current Consumption: 56.3 A • Maximum Motor Current: 95 A • Short-Circuit Rating: 2.5 kA • Spindle Running Time: 2,326 h • Condition: Very Good • Designed for complete machining of complex workpieces in a single setup • Suitable for high-precision single-part, small-batch and series production • Ready for immediate production after installation Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2001, VICTOR V TURN 36 HYD 3 JAW CHUCK TAILSTOCK 2 AXIS 750 CENTRES SWARF CONVEYOR YEAR 2001 Rodpfx Anezhwufopow

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, Vertical machining center Manufacturer: DMG Type: DMU 160 P duoBLOCK Year of manufacture: 2007 Control system: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travel distances X: 1600 mm Y: 1250 mm Z: 1000 mm Tool changer: 60 tool positions Spindle speed: 18,000 rpm Rsdpezhufhjfx Anpow - HSK 63 - Measuring probe - Blum laser tool measurement system - Coolant tank, 980 liters - Internal coolant system, 40 bar - Chip conveyor - Electronic handwheel - Operating mode 4 - Preparation for 3D Quickset (software) - Universal milling head with controlled A-axis Machine from a space technology institute. Excellent condition. Subject to errors and prior sale.

Condition: used, Year of construction: 2010, greates pass round over bed 700 mm swing diameter over slide rest 380 mm max. turning diameter 410 mm control HEIDENHAIN - 4290 max. Spindle speed 5.000 U/min. centre distance 975 mm travel -x axis 300 mm travel -y axis 120 (+/- 60) mm travel -z axis 850 mm numbers of positions in the tool changer 12 tool taper VDI40 CNC Turning- and Milling Center | DMG - CTX 800 Beta equipped with a turret for driven tools, SCHUNK lathe chuck (Ø 315 mm) as well as tailstock and chip conveyor. Rodpszhpagofx Anpew An extensive tool package is in the Scope of delivery includes. The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX800beta | CTX800 beta | CTX-800

Condition: ready for operation (used), Year of construction: 2003, spindle speed (max.): 12,000 rpm, travel distance X-axis: 505 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: OKUMA, controller model: OSP-U100L, number of slots in tool magazine: 44, number of axes: 6, This 6-axis Okuma MacTurn350-W was manufactured in 2003. It features a Z-axis travel of 2000 mm and a spindle speed of 12,000 RPM. The machine is equipped with an automatic tool changer that holds 44 tools and is ready for robotic integration. If you are looking to get high-quality turning and milling capabilities, consider the Okuma MacTurn350-W turn-mill centre we have for sale. Contact us for further details. • Y-axis: yes • Through-spindle coolant (water) • Lower turret: no live tooling • Simultaneous machining: not available • Auto door • Robot interface: ready Additional equipment • SMW chucks: 10" and 8" to be supplied • Note: chucks currently installed on the machine are not included Technical Specification Counter Spindle Yes Driven Tools No Taper Size HSK 63 Rodpjzhnb Aefx Anpew Through-spindle Coolant Yes

Condition: used, Year of construction: 2004, Mazak Integrex E-650H x 2000 CNC Multi-Tasking CNC Lathe. S/No. 168658 (2004) with Mazatrol Fusion 640MT Pro Control, Max Swing 920mm, Spindle Motor 45kW, Rotary Spindle Motor 37 kW, Max Spindle Speed 1600rpm, Spindle Bore 260mm Dia, X/Y/Z Travels 1025/650/2106mm, B-Axis -30deg/+210deg, C-Axis 360deg, Rapids X/Y/Z 40/40/40m/min, Max Rotary Tool Spindle Speed 10,000rpm, Tailstock Travel 1858mm, Tailstock Quill Stroke 160mm, Tailstock Centre MT6, Automatic 80 Position Toolchanger, Spindle Taper Capto C8, Cromar Swarf Conveyor. Country of Origin: Japan Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Rodpfx Anszhmt Djpew Location: This lots is located in Birmingham, UK. Please see individual lot for loading information and charges. All/Any tooling is being offered as specifically described.

Condition: excellent (used), With C-axis Redpfx Anszhmnbepsw With driven tools FANUC 21i TB Manual Guide control Turning diameter max 355 mm Turning length -1330 mm Spindle speeds -2'800 rpm Top turret tool holders 12 driven positions Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), With sub-spindle With C-axis With Y-axis FANUC 18i TB Manual Guide control Turning diameter max 280 mm Turning length -400 mm Spindle speeds -6'000 rpm each C-axis dividing 0.001 ° Spindle taper ASA A2-5 Top turret tool holders 12 driven positions Barloader Piece catcher attachement Chip conveyor Misc. accessories MARCELS MASCHINEN CH Rjdpfxszhmi Se Anpsw

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: M134377I2WA, turning diameter: 300 mm, spindle speed (max.): 5,000 rpm, rotational speed (max.): 2,500 rpm, workpiece weight (max.): 30 kg, total height: 3,300 mm, total length: 2,200 mm, total width: 3,400 mm, overall weight: 9,600 kg, Equipment: documentation/manual, rotational speed infinitely variable, Fully automated Hwacheon Hi-TECH CNC lathe with WEKAL portal system including robot Base: Hwacheon Hi-TECH 450BL YSMC (Siemens) Year of manufacture 2024 | Like new | Manufacturer's warranty until 03/26/2027 | Immediately available Highlights ✓ Year of manufacture 2024 ✓ Automatic door drive ✓ Like new condition ✓ Robot interface ✓ Fully functional ✓ Travel monitoring ✓ Manufacturer's warranty until 03/26/2027 ✓ High-pressure coolant system ✓ Siemens SINUMERIK with ShopTurn ✓ Oil/emulsion mist filter ✓ DXF reader integrated ✓ Fully automatic WEKAL portal system ✓ Y-axis ±60 mm ✓ WEKAL WRB roller conveyor ✓ Counter spindle 4,000 rpm ✓ Robot gripper module ✓ Driven tools up to 5,000 rpm ✓ Complete documentation ✓ Torque upgrade ✓ Ongoing maintenance with records Complete automated production cell The system is designed for the automated machining of round stock. Workpiece range: • Diameter 50–300 mm • Workpiece weight up to 30 kg The WEKAL automation system handles the loading and unloading of workpieces and enables economical operation with minimal manual intervention. WEKAL WPA portal system • 2-axis portal system • X-beam 7,000 mm • X-travel approx. 5,500 mm • Z-travel approx. 1,800 mm • Conveyor length WRB roller conveyor 10,000 mm • 20 workpiece carriers • Robot gripper module with quick-change system Machine equipment • Siemens ShopTurn • ProfiNet • Touchscreen • DXF reader • Network drive management • Geared spindle 22/18.5 kW • 2,500 rpm • Y-axis ±60 mm • Counter spindle • Driven tools 5,000 rpm Redpfx Anjzhltcjpow • Torque upgrade • High-pressure cooling • Oil mist extraction • Chuck flushing • Chuck blow-out • Travel monitoring • Automatic door drive • Robot interface Documentation and condition The system is in like-new and fully functional condition. • Complete documentation available • Ongoing maintenance including records • Manufacturer's warranty until 03/26/2027 • Available in the short term The system can be inspected while powered on. Training and instruction are possible. Programming and setup of your components are possible. Sale ex works. Buyer organizes disassembly, loading, and transport.

Condition: good (used), Year of construction: 1998, functionality: unexamined, Angelini DG 13 Year of manufacture: 1998 Rjdszhikropfx Anpsw Control system: Fanuc Chip conveyor Tool turret: 12 positions Documentation and export are available for an additional charge. Inspection under power is possible. We would be happy to send you further details or arrange an on-site inspection.

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control system; Rjdpfxozhbwqo Anpow Thermal sensors for maximum precision; Y-axis; Subspindle with collet chuck; Spindle bore 80 mm (main spindle); All axes with box ways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders included; Robot loading by Halter available upon request! Photo attached. An automatic door can be retrofitted for this purpose. In Germany, complete commissioning upon request. All at additional cost!

Condition: excellent (used), Year of construction: 2016, operating hours: 25,187 h, functionality: fully functional, The Mazak 3D Fabri Gear 400 II is a 6-axis 3D laser cutting machine designed for cutting tubes and profiles, specifically engineered for processing large-diameter materials and structural shapes. The 2016 model is typically equipped with a 4.0 kW Panasonic CO2 laser resonator and specialized 3D heads for complex cross-sections. Key technical parameters (2016 model): Laser type: 4.0 kW (4000 W) CO2 resonator Redezg U Tpopfx Anpjw Maximum material length: 12,000 mm (12 m) Maximum tube diameter: approx. 406 mm (16") Maximum square profile: 254 mm x 254 mm (10" x 10") Axes and movement: 6-axis control (X, Y, Z, A, B, C) Control unit: Mazak FX Maximum workpiece weight: approx. 480 kg Functions and capabilities: Material types: Carbon steel, stainless steel, and structural profiles (I-beams, channels, angles). 3D head: Rotatable 3D laser head with a touch sensor (probe) and an auto-focus system. Automation: Weld seam detection and automatic material measurement. Optional equipment: Threading unit (enables cutting and threading in a single cycle) V-TYPE FEEDER Machine operating hours: 25,187 hours. Link to machine video:

Condition: good (used), Year of construction: 2008, operating hours: 5,400 h, functionality: fully functional, Gildemeister CTX410 Control system: FANUC 32i Chip conveyor Rjdpfxezg T Hnj Anpjw Coolant system Tool turret: 12 positions Documentation and export available for an additional charge. Inspection possible while the machine is powered on. We would be happy to send you further details or arrange an on-site inspection.

Condition: used, Year of construction: 2012, New mill spindle 2026 Turning diameter: 760 mm Turning length: 1540 mm Control: FANUC Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1000 mm X-axis travel: 630 x 220 mm Z-axis travel: 1585 x 1515 mm Y-axis travel: 230 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 12,000 rpm Tool changer: 40 positions Turret: 12 stations Tool holder: BMT 65 P, Capto Drive power: 26/22 kW Total power requirement: 100 kVA Machine weight: approx. 15.5 t Space required: approx. 6.1 x 2.7 x 3.0 m Options: High pressure coolant 60 bar Auto door & Safety Edge Auto tool setter Coolant blast for chuck jaw cleaning Coolant gun Dual chuck pressure Redpfx Aszg N Dionpow LNS Bar feed interface Prep. for special steady rest lower turret Thru-coolant for Main and Sub spindle Tool load monotoring function Profibus 3 color patrol lamp Renishaw RMP60 INCL. high speed SKIp Function

Condition: good (used), Year of construction: 2022, functionality: fully functional, Hurco TM 8 MI turning-milling center, year of manufacture 2022, Winmax Lathe control system, travel range X/Z 203/550 mm, 12-station turret, VDI 30, spindle speed up to 4,000 rpm, Redezg E E Aepfx Anpow C-axis, driven tools, chip conveyor, bar capacity up to 65 mm.

Condition: good (used), Year of construction: 2011, Maximum machining diameter 42mm, Rsdezg Egmjpfx Anpjw maximum machining length 175mm, spindle power 7.5/5.5Kw , spindle speed 5,000rpm, 8 station turret, milling speed 5,000rpm, Fanuc OI-TD control, 3 jaw chuck, parts catcher.

Condition: excellent (used), Year of construction: 2019, Swing 806mm, Swing over cross slide 527mm, Rjdpfx Aszg Efijnpsw maximum cutting diameter 457mm, 762mm between centres, 584mm maximum cutting length, 0.01 degree C axis, 3000rpm Milling 3.7kW, +/- 50mm Y axis, 76mm Bar capacity, 22.4kW Spindle Motor, 3400rpm spindle, 24m/minute rapid feedrate, 24 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: used, Year of construction: 1996, operating hours: 48,257 h, functionality: fully functional, machine/vehicle number: 299, Mori Seiki SL150 & Iemca short bar feeder. The machine is fully functional. Redpfezg A Saox Anpew 12-Station Turret with Tool Holders MSC-518 (Fanuc ) CNC Control 8″ Hydraulic Chuck 2 Step gear spindle for powerful torque Hydraulic Tailstock with Power Quill Chip Conveyor Coolant System. Automatic Lubrication system Parts catcher