Subishi Antminer Company Ltd (Thailand) (Bkk)

Condition: used, pressure 25 t total power requirement 4 kW Ndodpfx Ahjxzk S Dj Dsd 200 mm inward space

Condition: used, Year of construction: 2023, x-travel 1.620 mm y-travel 700 mm z-travel 640 mm Control Heidenhain table dimensions 1.700 x 620 mm spindle tunring speed 8.000 U/min tool taper SK 40 distance spindle /table 65 - 705 mm number of tool places 30 Pos. tool changing time 2,5 sec max. tool diameter 76 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse ( x / y / z ) 30.000 mm/min T-slots (number x width x distance) 5 x 18 125 mm table load 1.300 kg auto power on hours ca. 4.900 h spindle hours ca. 1.250 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Ndsdoxzk Sqspfx Ah Dod Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 600 mm y-travel 420 mm z-travel 450 mm Control Heidenhain distance spindle /table 120 - 570 mm table dimensions 750 x 420 mm spindle tunring speed 60 - 12.000 U/min torque 70 Nm power capacity 16 kW tool taper SK 40 number of tool places 30 Pos. tool changing time 1,5 sec max. tool weight 6 kg max. tool diameter 76 mm max. tool length 250 mm rapid traverse 32 m/min feed 1 - 12.000 mm/min T-slots (number x width x distance) 5 x 14 x 65 mm weight of the machine ca. ca. 4.500 kg auto power on hours ca. 4.683 h spindle hours ca. 2.466 h Ndsdpfsxzk Skox Ah Djd In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2017, x-travel 1.000 mm y-travel 800 mm z-travel 700 mm Control Siemens 840D sl Operate spindle tunring speed 14.000 U/min torque 160 Nm power capacity 29 kW swivelling range 0 - 180 ° tool taper SK 40 rotary table adjustment 360 ° Rotary table dimensions 1.000 x 800 mm number of tool places 54 Pos. Nedpfxoxzk Sde Ah Dedd In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - 40 bar internal coolant supply - Swivel milling head - Integrated rotary table - Workpiece touch probe with wireless transmission, Heidenhain TS 460 - Coolant and compressed air gun - Chip conveyor - Coolant system - Electronic handwheel - Work area light - Siemens Sinumerik 840D sl Operate control with MDynamics - 5-axis machining package Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2005, control Heidenhain x-travel 900 mm y-travel 900 mm Ndjdpfx Aoxzk R Teh Ded z-travel 500 mm a-axis -30/+110 ° c-axis 360 ° table diameter 800 mm table load 1.000 kg spindle tunring speed 18.000 U/min spindle drive 40 kW torque 137/100 Nm tool taper HSK-63 A number of tool places 30 Pos. max. tool diameter 90 mm max. tool length 300 mm max. tool weight 10 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2004, weight of the machine ca. 5500 kg Ndjdoxzk R Hspfx Ah Ded

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 560 mm z-travel 560 mm Nsdpfx Aoxzk Ryjh Dodd weight of the machine ca. 8500 kg

Condition: used, Year of construction: 2010, turning diameter 370 mm Ndjdpfx Ahjxzk Rte Dsd turning length 424 mm control Fanuc

Condition: used, Year of construction: 2005, control Traub TX8i weight of the machine ca. 4000 kg Nedpoxzk Rmefx Ah Djdd

Condition: used, Year of construction: 1998, x-travel 840 mm y-travel 860 mm z-travel 840 mm control Fanuc MCS-516 Ndsdpfx Ahjxzk Rgs Djd

Condition: used, Year of construction: 2003, x-travel 3000 mm Nedpfx Ahjxzk Rao Dedd y-travel 800 mm z-travel 800 mm weight of the machine ca. 16000 kg

Condition: used, Year of construction: 1999, x-travel 505 mm Ndodpfsxzk N Nsx Ah Djd y-travel 355 mm z-travel 610 mm control Heidenhain TNC 430 weight of the machine ca. 4000 kg

Condition: used, Year of construction: 2017, x-travel 550 mm y-travel 400 mm z-travel 400 mm Nedpfx Aexzk N Aoh Dodd weight of the machine ca. 9000 kg

Condition: used, x-travel 1050 mm y-travel 600 mm Nsdpfjxzk Nvsx Ah Dedd z-travel 600 mm weight of the machine ca. 7200 kg

Condition: used, Year of construction: 2013, x-travel 650 mm Ndsdpfxjxzk Npe Ah Djd y-travel 765 mm z-travel 520 mm weight of the machine ca. 10000 kg

Condition: used, Year of construction: 2000, grinding diameter 450 mm Ndodoxzk Nispfx Ah Dod grinding length 1000 mm centre height 225 mm Photo of machine already delivered in similar scope: -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: excellent (used), Year of construction: 1996, Description follows Ndsdpfx Aexzk Nceh Dsd

Condition: excellent (used), Year of construction: 1986, plate thickness 5 mm Nedpfx Aoxzk I Seh Dsdd sheet width 40 mm

Year of construction: 2010, condition: excellent (used), Description to follow! Ndsdpfxexzk I Eo Ah Ded

Condition: excellent (used), Year of construction: 1992, Description to follow! Ndodpfx Aexzk Ixsh Djd

Condition: excellent (used), Year of construction: 1975, O F F E R We are pleased to offer you, subject to prior sale and errors excepted, the following available ex-stock: DECKEL Universal Tool Milling Machine Model: FP 2 Year of manufacture: approx. 1975 Nedpfx Ahjxzk Ire Dsdd _____ Table travel: - Longitudinal (motor/manual): 390 / 400 mm - Vertical (motor/manual): 390 / 400 mm Cross slide travel (motor/manual): 190 / 200 mm Fixed angle table: 250 x 700 mm Distance from spindle to table: 400 mm Spindle overhang: approx. 165–465 mm Spindle taper: SK 40 18 spindle speeds: 40–2,000 rpm Infinitely variable feed range: 5–400 mm/min Rapid traverse: 1,200 mm/min Spindle drive: 2.2 kW Total drive: 2.5 kW - 380 V - 50 Hz Weight: 1,000 kg Accessories / Special equipment: • DECKEL universal swivel angle table approx. 250 x 700 mm, mounted • Original DECKEL universal dividing head with tailstock and faceplates • Original DECKEL high-speed vertical milling head with independent drive • Large original DECKEL tool cabinet for storage of the above accessories and various arbors, approx. 30 collets, various milling tools, additional arbors, etc., as well as operation tools, separate electrical cabinet, coolant system Condition: Very good – demonstration ready, ideal for training workshops/apprenticeship use Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice We always have further DECKEL FP 1 / FP 2 / FP 4 milling machines in stock, as well as accessories such as spiral milling attachments, etc.

Condition: excellent (used), Year of construction: 1990, Description to follow! Nsdexzk Ilopfx Ah Djdd

Condition: used, Year of construction: 2017, turning diameter max. 356 mm turning length 705 mm control M730 UM Mapps CELOS greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 80 (91) mm C-Axis 0,001 ° Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm C-Axis 0,001 ° x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 10.000 min -1 power capacity - driven tools 5,5 / 4,2 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 4,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI - NLX 2500 SY / 700 - Subspindle - Tool-Drive Ndsdoxzk Ifopfx Ah Djd - C, Y-Axis - only 1.237h Spindle hours

Condition: used, Year of construction: 2012, turning diameter max. 366 mm turning length 705 mm control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm turning speed range - main spindle 4.000 min/-1 Ndodpfxjxzk H Uo Ah Ded power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bearing diameter 140 mm spindle bore 91 mm Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm x-travel 260 mm z-travel 795 mm Y - Axis +/-50 mm rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 41 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 4,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter MORI SEIKI - NLX 2500 SY / 700

Condition: excellent (used), mileage: 634,278 km, power: 303 kW (411.96 HP), first registration: 04/2014, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 4,920 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2014, Equipment: AdBlue, XLRTEH4300G026532 = Further Information = Technical Specifications Number of cylinders: 6 Engine displacement: 12,902 cc Maximum front axle load: 8,000 kg Maximum rear axle load: 11,500 kg Weights Unladen weight: 7,648 kg Payload: 12,852 kg Gross vehicle weight (GVW): 20,500 kg Nodpsxzk E Rsfx Ah Dodd Condition Technical condition: very good Visual condition: very good Identification Registration number: 25-BVJ-9 Additional Information Please contact Sales for more information. = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights may be derived from the information provided. Office Phone: Mobile: Dutch - English - German - French - Spanish - Italian (Available on WhatsApp and Viber.) Mobile: Dutch (Available on WhatsApp and Viber.) When paying by bank transfer, the amount must be transferred to our bank account listed below. Always verify the payment details as specified on our website. If you receive different information, please contact us immediately. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U