DZ Basic Technology SRL

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 630 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, total height: 3,200 mm, total width: 3,400 mm, overall weight: 9,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 38,000 W, number of slots in tool magazine: 40, product length (max.): 6,250 mm, number of axes: 4, This 4-axis HELLER MCI 16 vertical machining centre was manufactured in 2005. It features a robust X, Y, and Z-axis travel of 630 mm, with a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 40 pockets. The machine has a total connected load of approximately 69 kVA and weighs 9,000 kg. If you are looking to get high-quality machining capabilities, consider the HELLER MCI 16 vertical machining centre we have for sale. Contact us for further details. - Voltage: 400 V- Frequency: 50 Hz- Nominal Current: 99 A- Total Connected Load: approx. 69 kVA- Feed Rates (X, Y, Z): 1 - 60,000 mm/min- Rapid Traverse (X, Y, Z): 60,000 mm/min- Acceleration (X, Y, Z): 10.0 m/s²- Rotary Table Indexing Precision: 360 x 1°, precision 6"- Rotary Table Max Clamping Weight: 500 daN- Rotary Table Max Tangential Torque: 10,000 Nm- Rotary Table Max Tilting Moment: 8,000 Nm- B-Axis Speed: 40 rpm- Pallet Changer Size: 400 x 500 mm, 61 x M12 mounting thread- Tool Chain Magazine Capacity: 40 tool pockets- Max Tool Diameter: 72 mm (all pockets occupied) / 150 mm (with free adjacent pockets)- Max Tool Length: 320 mm- Max Tool Weight: 12 daN- Spindle Max Power (S6-40%): 38 kW (from 1500 rpm)- Spindle Max Torque (S6-40%): 240 Nm (up to 1500 rpm)- Max Spindle Speed: 10,000 rpm- Measuring System: Direct with linear scales- Positioning Tolerance: 0.007 mm- Coolant Capacity: approx. 1,500 L- Optional Equipment / Features: Central cooling unit for spindle and cabinet, hydraulic workpiece clamping, run-out inspection device RLE1, mechanical drill breakage control, coolant lubricant system with chip conveyor, Renishaw probe, manual rotatable workpiece setup station (4x90°)- Included Components: 2x hydraulic clamping devices, 2x machine pallets Technical Specification Taper Size SK 40 Ijdpfx Aoz Dhdaokzobb

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, Machine type: CNC vertical machining center Travel in X-axis: 1,040 mm Travel in Y-axis: 600 mm Travel in Z-axis: 500 mm Table size: 1,250 × 600 mm Max. table load: 600–800 kg Tool holder: SK 40 Tool changer: 30 positions Max. tool diameter: 100 mm / 140 mm with available adjacent positions Max. tool length: 300 mm Max. tool weight: 7 kg Feed rate: up to 40 m/min Rapid traverse: up to 70 m/min Ibedpoz Dd Sajfx Akzob Machine weight: approx. 8,900 kg Linear drive / Linear technology

Condition: used, Year of construction: 2011, EMCO Concept Mill CM 450 - 3-Axis CNC Milling Machine - Interchangeable WinNC control: Sinumerik 810/840 D / Heidenhain TNC 426/30 - Automatic tool changer - 20-position tool magazine with directional logic - Tool taper air blow-out device - Coolant system - Central lubrication system - Machine light - Operating manual - Operating time: approx. 24,660 hours Ibjdpfx Akjz Da Haozob - Year of manufacture: 2011 Technical data - Machine type: 3-axis CNC milling machine - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm - Distance spindle nose–table: 100–600 mm - Table size: 700 × 520 mm - T-slots: 5 × 18 mm, spacing 100 mm - Max. table load: 500 kg - Main spindle: 11 kW (S6–40 %) - Speed range: 50 – 12000 rpm - Max. torque: 83 Nm (S6–40 %) - Tool holder: SK40 / DIN 69871 - Tool magazine: 20 tools - Max. tool diameter: 80 mm with adjacent tool / 125 mm without - Max. tool length: 250 mm - Max. tool weight: 8 kg - Rapid traverse X/Y/Z: 24 m/min - Coolant pump: 2 bar / 40 l/min - Coolant tank: 160 l - Compressed air: min. 6 bar / approx. 150 l/min - Connected load: 16 kVA - Mains connection: 3 × 400 V / 35 A - Footprint (W x H x D): approx. 2040 × 2920 x 2445 mm - Weight: approx. 4000 kg

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, CNC Vertical Machining Center “DECKEL MAHO M 1” With Siemens 828 D Shop Mill control Year of manufacture: 2022, Commissioning: 9/2023 Travel ranges: X 550, Y 550, Z 510 Spindle speed range: 20 – 12,000 rpm, stepless With the following accessories: Fixed angular table, 850 mm x 650 mm clamping surface Vertical tool changer with 24 magazine positions (SK 40) IKZ 20 bar Electronic handwheel 3D measuring probe Renishaw PP 40 Tool length measurement Renishaw TS27R Full protection enclosure with sliding doors and interior lighting Coolant system Chip conveyor Oil mist extraction Coolant spray gun 3 adjustable machine feet Operating manuals Iodpfx Asz A D Dmekzsbb THE MACHINE IS IN EXCELLENT CONDITION!

Condition: ready for operation (used), Year of construction: 2020, operating hours: 11,395 h, travel distance X-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, overall weight: 13,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis POSmill H 500 U was manufactured in 2020. It features a Heidenhain TNC 640 control system and includes additional equipment such as a chip conveyor and an external cooling unit. With a nominal power of 60 kVA and extensive operational hours, this machine is well-equipped for high-quality machining tasks. If you are looking to get high-quality machining capabilities, consider the POSmill H 500 U vertical machining centre we have for sale. Contact us for further details. Iodpfx Aoz Aykljkzebb - Control Type: Heidenhain TNC 640 (NC Software: 340590 09 SP2)- Nominal Power: 60 kVA- Full Load Current: 80 A- Max. Load Current: 115 A- Short Circuit Resistance: 25 kA- Voltage: 400 V, 50 Hz (3-Phase)- Control On Hours: 24,470:15:33- Machine On Hours: 22,600:24:22- Program Run Hours: 14,169:52:59- Hydraulic Hours: 22,633:39:41- Axis Hours: 11,234:28:24- Spindle S1 Hours: 11,395:56:49- Additional Equipment: Chip conveyor, external cooling/chiller unit, handheld pendant control unit

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, ITALIAN — DOOSAN DVF-5000 Brand: DOOSAN Model: DVF-5000 Machine Type: 5-axis CNC machining center Year of manufacture: 2018 CNC control: Heidenhain TNC-640 X-axis travel: 625 mm Y-axis travel: 450 mm Z-axis travel: 400 mm B-axis travel: −30° / +110° C-axis travel: 360° continuous Rapid traverse rate X / Y / Z axes: 40,000 mm/min Working feed rate X / Y / Z axes: 20,000 mm/min Rapid traverse rate B / C axes: 20 rpm Spindle taper: ISO-40 Tool holder and pull stud: DIN 69871 A40 – DIN 69872 A40 Maximum spindle speed: 12,000 rpm Maximum spindle power: 18.5 kW Maximum spindle torque: 118 Nm Tilting rotary table: Ø 500 × 450 mm Maximum workpiece size: Ø 550 × H 450 mm Maximum workpiece weight: 400 kg Tool magazine: 40 positions Maximum tool diameter with adjacent positions occupied / free: Ø 75 / 125 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Machine dimensions: 2,700 × 2,205 × H 2,890 mm Machine weight: 7,500 kg Chip conveyor: Included Coolant tank: Complete with washing pumps Through-spindle coolant (CTS): 20 bar with cartridge filter Measuring systems: Heidenhain linear scales on X / Y / Z axes Cooling unit: For spindle Tool presetter: Renishaw Workpiece probe: Renishaw Fume extractor: Included Magnetic table: Included Zero-point clamping system: Included Tooling: Set of collets/pull studs and various tools Documentation: Manuals, electrical diagrams and CE Declaration ENGLISH — DOOSAN DVF-5000 Brand: DOOSAN Model: DVF-5000 Machine Type: 5-axis CNC machining center Year of manufacture: 2018 Iedpfxjz Atvno Akzobb CNC control: Heidenhain TNC-640 X-axis travel: 625 mm Y-axis travel: 450 mm Z-axis travel: 400 mm B-axis travel: −30° / +110° C-axis travel: 360° continuous Rapid traverse rate X / Y / Z axes: 40,000 mm/min Working feed rate X / Y / Z axes: 20,000 mm/min Rapid traverse rate B / C axes: 20 rpm Spindle taper: ISO-40 Tool holder and pull stud: DIN 69871 A40 – DIN 69872 A40 Maximum spindle speed: 12,000 rpm Maximum spindle power: 18.5 kW Maximum spindle torque: 118 Nm Tilting rotary table: Ø 500 × 450 mm Maximum workpiece size: Ø 550 × H 450 mm Maximum workpiece weight: 400 kg Tool magazine: 40 positions Maximum tool diameter with adjacent positions occupied / free: Ø 75 / 125 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Machine dimensions: 2,700 × 2,205 × H 2,890 mm Machine weight: 7,500 kg Chip conveyor: Included Coolant tank: Complete with washing pumps Through-spindle coolant (CTS): 20 bar with cartridge filter Linear scales: Heidenhain scales on X / Y / Z axes Cooling unit: For spindle Tool presetter: Renishaw Workpiece probe: Renishaw Fume extractor: Included Magnetic table: Included Zero-point clamping system: Included Tooling: Set of collets/pull studs and various tools Documentation: Manuals, electrical diagrams and CE Declaration

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, overall weight: 10,700 kg, Control unit defective, can be used as a source of spare parts. Ibsdoz Atpnepfx Akzeb For self-collection only. Details see the attachment and available upon request.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Ijdpfez Aplxex Akzsbb Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: used, Year of construction: 2015, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm control: Mitsubishi M70 table-size: 2 × 700 × 400 mm mm table load capacity: 2 × 250 kg kg tool taper: SK40 / ISO40 Revolution per minute: 12.000 U/min. tool changer with: 24 Plätze (+1 Werkzeugwechselposition) total power requirement: 25 kW Weight approx.: 6,6 t dimension machine approx.LxWxH: 3,7 × 2,60 × 2,78 m The Müga S6040 is a modern vertical CNC machining center designed for the precise complete machining of workpieces in single-part, small-batch, and series production. The machine is equipped with a high-performance main spindle with speeds of up to 12,000 rpm, a Mitsubishi M70 CNC control system, and an integrated twin pallet changer (worktable changer) for highly efficient and productive machining. Its rigid machine structure and precision linear guideways make the Müga S6040 ideally suited for demanding milling, drilling, tapping, and machining operations in toolmaking, mechanical engineering, mold making, and general metalworking. 4-axis CNC machining center with pallet changing system – 2 workstations (A/B), each equipped with its own CNC-controlled 4th axis and chuck. * Ijdozzyg Dopfx Akzsbb

Condition: like new (used), Year of construction: 2020, operating hours: 9,000 h, functionality: fully functional, MG MORI DMC 1150 V Year of manufacture: 2020 Machine type: CNC vertical machining center Travel distances X-axis: 1,150 mm Y-axis: 700 mm Z-axis: 550 mm Rapid traverse: 42 m/min Direct linear scales in X / Y / Z Work table Table size: 1,460 × 750 mm CNC control HEIDENHAIN TNC 640 3D control DMG MORI ERGOline Control 19" screen Main spindle DMG MORI speedMASTER Tool interface: HSK-A63 Speed range: 20–20,000 rpm Spindle power: 35 kW / 25 kW Torque: 130 Nm / 86 Nm Values specified at 40 % / 100 % duty cycle Active spindle cooling Tool magazine 60 tool positions HSK-A63 Chain magazine Carousel Dual gripper Direct manual tool loading into the magazine Coolant / MQL Internal coolant supply Coolant through the spindle MQL 40 bar Paper band filter Tank capacity: 600 liters Chip conveyor Machine bed flushing Extended machine bed flushing Additional flushing bar on the right side wall Flushing volume manually adjustable Flushing gun for chip removal Enclosure roof Workpiece measurement technology Infrared measuring probe HEIDENHAIN TS 460 Automation DMG MORI PH 150 Pallet loading and unloading system Handling system with pallet magazine Round magazine 2 servo axes: X-axis Magazine table Z-axis pneumatic Gripping arm / fork IPC with touch panel DMG Automation Jobmanager OMRON package Graphically supported operator guidance PROFIBUS interface Automatic loading door on the right side of the machine PROFIBUS communication during the loading cycle 2-channel safety circuits Electrical automation interface version 4.0 4-color signal light Pallet system PH 150 basic round magazine: 10-position System expanded to pallet size: 500 × 500 mm In this configuration: max. 4 pallet storage locations Handling weight expanded to max. 250 kg per pallet incl. load EROWA zero-point clamping system EROWA UPC pneumatic zero-point clamping system Connection coupling on the table 2 active pneumatic lines Pneumatic release via 6 bar system pressure Pressure increase to 7.5 bar EROWA MTS clamping system Zero-point clamping station EROWA MTS Adapter plate: 410 × 410 mm 4 clamping elements Pitch: 250 × 250 mm Pallets 4 × EROWA MTS pallets Pallet size: 498 × 498 mm Pitch: 250 mm Incl. clamping studs and coupling Surface smooth Material: Aluminum Iedpfszzm Dpex Akzebb The complete photo gallery is provided exclusively upon request. A sale to dealers is currently not possible. The complete order confirmation via DMG MORI will also be sent to you upon request.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 420 mm Travel range Z-axis: 450 mm Distance spindle nose – table: 120–570 mm Speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/air Tool holder: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Ibedezzlh Hjpfx Akzeb Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Heidenhain iTNC 620 CNC control system Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with double gripper Central lubrication Large access door to the work area Loading possible from above using an overhead crane Two waterproof work area lights CE certification The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No liability is assumed for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction. Iedpfxszzlhao Akzebb

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, feed rate Y-axis: 18 m/min, feed rate Z-axis: 16 m/min, workpiece weight (max.): 300 kg, total height: 1,683 mm, total length: 2,180 mm, total width: 1,723 mm, table width: 320 mm, table length: 800 mm, overall weight: 2,600 kg, spindle speed (min.): 8,000 rpm, number of slots in tool magazine: 16, Equipment: documentation/manual, Equipped with a BT40 spindle CTB servo spindle motor, 3.7 kW Spindle speed: 8,000 rpm Siemens 808D control system Advanced control (expandable with a 4th axis) 3-axis Siemens servo motors and drives 3-axis ball screw and linear guide Automatic tool changer with 16 positions Work table: 800 x 320 mm Cooling system LED work light Central lubrication system Electronic handwheel with emergency stop button Spiral chip conveyor Electrical control cabinet with air conditioning Automatic spindle air blow-out function Machine housing with 2 sliding doors at the front CE safety glass Safety interlock Air gun for compressed air Hand sprayer for coolant Iedpozzc Nbsfx Akzebb Telescopic guard in the X, Y, and Z axes 3-color warning light Tools and toolbox

Condition: ready for operation (used), Year of construction: 2003, operating hours: 14,085 h, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DECKEL MAHO DMC 65 V was manufactured in 2003. It features a spindle speed of 18,000 rpm and a tool changer capacity of 30 positions, enhancing its operational efficiency. The machine is equipped with a Heidenhain TNC 426 control system and optional equipment such as tool measurement and an automatic 3D probe. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 65 V vertical machining centre we have for sale. Contact us for further details. Ibsdpozza Eaofx Akzjb - Optional Equipment: Tool measurement, Automatic 3D probe, Chip conveyor, External cooling system- Operating Hours (Power-on / Program Run): 52,067 h / 14,085 h- Electrical Connection: 230V / 1A (Auxiliary)- Known Defects: Sensor for control cabinet ventilation does not always turn on; spindle collet seizes after ~3 weeks of inactivity (loosens after ~200 cycles of clamping/releasing, works flawlessly in continuous operation)

Condition: ready for operation (used), Year of construction: 2000, operating hours: 85,542 h, travel distance X-axis: 600 mm, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, spindle speed (max.): 16,000 rpm, number of axes: 5, This 5-axis HERMLE C 600 U was manufactured in 2000. It has a net weight of 6500 kg and includes a Knoll unit with internal cooling. If you are looking to get high-quality machining capabilities, consider the HERMLE C 600 U vertical machining centre we have for sale. Contact us for further details. - Spindle Operating Hours: 31,764 h- Internal Coolant Supply (IKZ) Pressure: 20 bar- Tool Taper: SK40- Operating Voltage: 400 V / 3-phase- Frequency: 50 Hz- Control Voltage: 24 V- Nominal Current: 63 A- Total Connected Load: 42 kVA- The folding roof needs replacement. Additional Equipment included: Knoll internal cooling system, approx. 200–300 pieces of various shrink-fit chucks (long & short), mandrels, collets, drill chucks Ibedpfx Aozyr Rljkzsb Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. Ibodpezyakmofx Akzjb

Condition: not inspected (used), Year of construction: 2007, operating hours: 19,028 h, machine/vehicle number: AB1007, Vertical machining center Spinner MVC 610, year of manufacture: 2007 Delivery terms: Free on board (FOB) truck Location: 74906 Bad Rappenau Collection: The machine must be collected on October 7, 2026. The exact collection time will be arranged in advance. Payment terms: Payment in advance - by bank transfer Technical data: Travel X-axis: 610 mm Travel Y-axis: 500 mm Travel Z-axis: 500 mm Rapid traverse X / Y / Z: 24 m/min Table size: 800 x 450 mm Max. workpiece weight: 500 kg T-slot size: 18 mm Max. spindle speed: 10,000 rpm Spindle taper: SK 40 Spindle drive power: 18.5 / 12.3 kW Tool changer: 24-position Max. tool diameter: 70 mm Max. tool length: 250 mm Max. tool weight: 8 kg Tool change time: 2.5 sec. Ibedpfxjzx S Rps Akzsb Control: Siemens 810D / 840D Feed motor X / Y / Z: 3.5 kW Coolant pump standard: 0.53 kW Coolant pump high pressure: 3 kW Compressed air requirement: 6 bar Scope of delivery: Available manuals as shown in the pictures Available accessories as shown in the pictures Two vices as shown in the pictures Measuring probe Two cabinets with hinged doors and contents as shown in the pictures Dimensions & weights: Installation dimensions L x W x H approx.: 3000 x 2500 x 2600 mm Weight approx.: 4000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►On request, we can offer transport to your desired location. ►The quoted price is net, plus VAT. ►The goods are sold excluding any warranty. ►Technical data subject to change. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: good (used), Year of construction: 1999, operating hours: 76,863 h, functionality: fully functional, controller manufacturer: Heidenhain, controller model: TNC 426, Equipment: chip conveyor, Title: 5-Axis Machining Center Deckel Maho DMC 125U L55, Year of Manufacture 1999, with Pallet Changer (5 Positions) Condition: good, technically and visually well-maintained, currently still in full productive use Year of Manufacture: 1999 Location: West Saxony Price: Negotiable Technical Data: Manufacturer: Deckel Maho GmbH, Pfronten Type: DMC 125U L55 Machine No.: 1110 000113 Control: Heidenhain TNC 426 5-Axis version with rotary table (B and C axes) Pallet changer with 5 pallet positions Integrated chip conveyor system Ibedpfjzxzgaox Akzjb Separate coolant/hydraulic unit Operating Hours: approx. 76,863 h Spindle Hours: 4,200 h Description: For sale is a 5-axis universal machining center Deckel Maho DMC 125U L55, year of manufacture 1999, with Heidenhain TNC 426 control. The machine features a rotary table with B and C axes for complete 5-axis machining of large workpieces, as well as a pallet changer with 5 positions for efficient, automated workpiece changes. A hall crane is also available at the location, which can be used for transporting and handling the workpieces if required. Condition is good, both technically and visually, with approximately 76,863 operating hours. The machine is currently still in full productive use and can be made available on short notice. Inspection and test run at the location in West Saxony can be arranged. Special Note: If there is sufficient interest, it is also possible to take over the entire production hall, including other machining centers, as a complete package. If you are interested in a complete takeover, please feel free to contact us. Price: Negotiable

Condition: used, Year of construction: 2006, Equipment: documentation/manual, Control Fanuc 0M Two palletes Table dimensions – 650x420 mm Axes: X 580mm, Y 420 mm, Z 490 mm Spindle 12 000 rpm, SK40 Machine dimensions 2500 x 2100 x 2500 mm Machine weight 3900 kg Ibodpfx Aozxxv Eokzjb

Condition: used, CNC CONTROL Controller: Fanuc 32i X-axis travel mm: 635 Y-axis travel mm: 510 Z-axis travel mm: 460 Distance spindle nose - table surface mm: 120 - 580 Table dimensions mm: 790 x 560 Max. table load kg: 600 Iedpfx Aszxivvokzjbb Max. spindle speed rpm: 8.000 Spindle taper / interface: SK 40 Tool holder / taper: SK 40 Tool magazine capacity: 20 Under power hours: 6.313 Spindle working hours: 2.999

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, empty load weight: 13,000 kg, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 1,100 mm Travel range, Z-axis: 500 mm C-axis rotation: 360° Tool magazine slots: 32 pcs. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Dry weight: 13,000 kg Transport packages: 3 pcs. EQUIPMENT Documentation Ibsdpjzxckmsfx Akzjb CE marking

Condition: excellent (used), Deckel Maho DMC 835V CNC machining center Year of manufacture: 2008 Control system: Siemens 840D with Shopmill Travel range X/Y/Z: 835 mm / 510 mm / 510 mm Spindle speed: 10,000 rpm Spindle power: 14 kW Table dimensions X/Y: 1000 mm / 560 mm Table load capacity: 800 kg max. Workpiece height: 720 mm Iodpfx Aszw Auvskzobb Tool positions: 20 Tool holder: SK40 Weight: approx. 4500 kg Operating hours: 9521 h Chip conveyor Handwheel

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, HURCO VM10i VERTICAL MACHINING CENTRE Year: 2015 Axis X 660 mm Axis Y 406 mm Axis Z 508 mm Rotary table (4th axis) no Type of CNC Table length 762 mm Table width 406 mm Max. part weight 340 kg Number of tool pockets 20 Spindle taper Max. spindle speed 10000 rpm Ibodpfxozwwndj Akzsb Spindle motor power 11 kW

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 600 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, table width: 600 mm, table length: 900 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis MORI SEIKI DURA VERTICAL 5060 was manufactured in 2007. It features a travel distance of 600 mm in the X-axis, 530 mm in the Y-axis, and 510 mm in the Z-axis. The machine includes a table size of 900 x 600 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DURA VERTICAL 5060 vertical machining centre we have for sale. Contact us for further details. Ibedpfezwvkkjx Akzsb • Travel X: 600 mm • Travel Y: 530 mm • Travel Z: 510 mm • Table Length: 900 mm • Table Width: 600 mm • Table Load: 500 kg • Spindle Speed: 10,000 rpm • Spindle Taper Options: SK40 / BT40 • Tool Positions: 30 Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2002, Working travels 600 x 450 x 450 mm Table size 850 x 530 mm Spindle taper HSK 63 Spindle speeds -20'000 rpm Tool changer 30 Pos. Control HEIDENHAIN iTNC 530 3D Measuring tracer Tool measurement RENISHAW TS27R Ibjdpfezwt Hcsx Akzeb Tool breakage control device Tool lenght and diameter measuring device Misc. accessories MARCELS MASCHINEN CH