1A Maschinen GmbH

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 2,185 mm, total width: 670 mm, total height: 2,150 mm, overall weight: 1,090 kg, input voltage: 400 V, workpiece height (max.): 100 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 200 mm, input current: 16 A, This machine is as good as new, has only been on display in the showroom, and was used as a demo model. Hfedpfx Ahox U D Dpoujb The F200 XL is a 3-station machine and comes standard with the brush height tracking system developed by Q-Fin. Combined with its simple button interface, this ensures that setting up and operating the F200 is intuitive, resulting in the most user-friendly machine available on the market. The machine is equipped as standard with steplessly adjustable speed settings for both the conveyor and the brush(es) and/or grinding head(s), allowing for all possible machining processes and finishes to be achieved. You can determine your desired finish yourself. The F200 XL can be fitted with either a vacuum system (for non-ferrous metals, such as stainless steel and aluminum) or a magnet system (for ferrous metals), depending on your application. These systems ensure effective fixation of the workpieces on the conveyor table, allowing even smaller workpieces (from 10 x 10 mm with the magnet system) to be processed safely, easily, and quickly. At Q-Fin, we truly believe in a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines.

Condition: used, Year of construction: 2023, functionality: fully functional, total length: 1,850 mm, total width: 670 mm, total height: 2,145 mm, overall weight: 1,090 kg, input voltage: 400 V, workpiece height (max.): 100 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 200 mm, input current: 16 A, This machine has been used for several years. The machine has been inspected, tested, and operates 100% as intended. The F200 XL is a 3-station machine suitable for deburring, grinding, and/or edge rounding of small sheet metal parts. As its first processing station, this deburring machine features a grinding unit, followed by two combination brushes. The grinding belt removes burrs or provides the product with a fine linear finish. The brushes deliver the desired edge rounding and create a uniform finish on the surface. Hfodpfxex U Dx He Ahuob The F200 XL can be optionally equipped with a vacuum system (for non-ferrous metals, such as stainless steel and aluminium) or a magnetic system (for ferrous metals). These systems ensure effective fixation of the workpieces on the conveyor table, making it possible to safely, efficiently, and quickly process even the smallest workpieces (from 10 x 10 mm with the magnetic system). At Q-Fin, we are firmly convinced of the advantages of a compact machine for small workpieces. In many cases, the throughput speed of this machine is up to five times higher than comparable machines.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total length: 2,150 mm, total width: 1,805 mm, total height: 2,320 mm, overall weight: 2,850 kg, input voltage: 400 V, input frequency: 50 Hz, power: 16 kW (21.75 HP), input current: 32 A, This machine is as good as new, has only been displayed in the showroom, and has served as a demonstration model. F800 – All-round Finishing Machine Discover the advanced F800 finishing machine, equipped with an intuitive HMI touchscreen for effortless operation. This screen enables operators to easily switch between various finishing programs, ensuring high reproducibility of product quality and minimizing operational errors. Depending on the materials to be processed, you can choose a system with either vacuum or magnetic support. At the infeed side, burrs and irregularities are removed by a grinding unit, resulting in a smooth, burr-free surface. This is followed by four oscillating combination brushes that apply light pressure. The brushes deliver uniform edge rounding on all edges and holes, both around and within the ground product, resulting in optimal finishing quality. Hfjdjx Uz Iljpfx Ahuob The F800 features automatic brush calibration to guarantee consistent precision, as well as full ERP control, ensuring seamless integration into automated production environments. In short, this is a finishing machine fully prepared for the future!

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 1,795 mm, total width: 2,210 mm, total height: 1,085 mm, overall weight: 1,400 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 8 kW (10.88 HP), workpiece width (max.): 1,200 mm, input current: 16 A, This machine has been in use for several years. The machine has been inspected, tested, and operates 100% as intended. Hedsx Ux Rwopfx Ahuofb Slag removal is a labor-intensive task, often still performed using a hammer and chisel. Alternatively, an electrically powered hand tool is used. Due to the heavy workload during operation, both for the operator and the hand tools, these hand tools require frequent replacement. This results in high costs, additional waste streams, and potential health issues for the operator. Manual slag removal is time-consuming and burdensome for both the operator and the equipment, leading to increased costs and wear. The DS600 and DS1200, specially developed by Q-Fin, automatically remove slag after plasma or oxy-fuel cutting. These machines can be easily integrated into any production line, ensuring slag is removed before the product reaches the deburring machine for edge rounding. The removed residual material is collected in a bin and can be disposed of as scrap. By carrying out slag removal separately, contamination in the deburring machine is prevented. Both models are ergonomically designed and feature touchscreen controls for ease of use. Slag is effectively removed by two counter-rotating slag hammer rollers, which strike the product twice per revolution. The result is a flat product ready for further finishing.

Condition: excellent (used), functionality: fully functional, Timesavers 22 Series 1100-WBB 1st Station: Abrasive belt for pre-grinding, ideal for removing burrs, laser scale, etc. Optionally, the abrasive belt can be switched to a Scotch-Brite/non-woven belt to achieve a surface finish on the parts. Easy belt change in under a minute thanks to quick-change system. The belt speed is continuously adjustable. 2nd & 3rd Station: Disc brushes for edge rounding, two stations in sequence with both left and right rotation for optimal results. Eccentric mechanism enables lateral oscillation of the disc brush stations (can be switched on or off). Easy brush change using the quick-change system. Disc brush speed is continuously adjustable. Conveyor belt speed is steplessly adjustable. Hsdpfx Ahox Uwlasujfb Working width: 1100 mm Maximum part thickness: 100 mm The machine is fully operational and can be inspected and tested under power on site.

Condition: used, Year of construction: 2026, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Length: mm Width: mm Hfjdpjx S Dxbjfx Ahujb Height: mm Machine weight: kg Standard configuration Extended machine accessories

Condition: used, Year of construction: 2026, max. working width: 1330 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Hfjdex S Dwqepfx Ahueb Sandbelt line speed: 18 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. machine thickness servo adjustment precision: 0,01 mm Length: 4200 mm Width: 2300 mm Height: 2400 mm Machine weight: 6500 kg Electrical connected load: 68 kW Standard configuration Machine configuration:2 or 3 station variants possible:1st station: Sanding belt2nd station: Brush elementsOptional 3rd station: Sanding belt or polishing station Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Total connected load:Sanding belt motor: 15 kWBrush motor: 11 kWInfeed belt motor: 4 kWVacuum suction motor: 15 kWFrequency converter for rotating brushes: 15 kW Machine with wet vacuum cleaner Extended machine accessories

Condition: used, Year of construction: 2023, functionality: fully functional, working width: 1,500 mm, sheet thickness (max.): 120 mm, overall weight: 4,200 kg, power: 49.8 kW (67.71 HP), 12 months warranty Hfjdpfx Asx Svwvshujb

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, working width: 900 mm, feed length X-axis: 1,000 mm, sheet thickness steel (max.): 40 mm, Machine ready to work . Hjdjx R Tn Ajpfx Ahusfb New conveyor belt and ESA touchpanel . Comes with full documentation .

Condition: used, Year of construction: 2018, operating hours: 3,550 h, functionality: fully functional, Used machine Year of manufacture: 2018 Technical Specifications Max. working width: 1100 mm Abrasive belt dimensions (W x L): 1130 x 1900 mm Brush diameter: 300 mm Table opening: 0–100 mm Speeds 1st unit, frequency-controlled: 5–15 m/sec 2nd unit, frequency-controlled: 6–17 m/sec Feed speed, frequency-controlled: 0.2–8 m/min Electrical Main motor 1st unit – W: 7.5 kW Main motor 2nd unit – RB: 1.0 kW Main motor brushes: 2 x 1.5 kW (3 kW) Main motor 3rd unit – W: 7.5 kW Hedpfx Ahsx I Ed Rsuefb Feed motor: 1.5 kW Vacuum pump: 4 kW Electrical connection: 400 Volt Frequency: 50 Hz Control voltage: 24 V Required air pressure: 6 bar Air consumption: 45 l/min Dust extraction per unit Required capacity with 100 mm connection: 6,100 m³/h Machine weight: 3,750 kg Accessories / Special features Extension table: approx. 400 mm with 2 rollers Feed belt cleaning brush Including used wet extraction unit Ulmatec NAS 6200-3 7.5 kW Year of manufacture: 2018 - Incl. H14 filter - Incl. EX version for aluminum - Incl. sludge container

Condition: good (used), functionality: fully functional, 1st station: deburring of sheet metal edges, 2nd station: deburring of notches and outer radii, with VA brushes; maximum sheet thickness: 5 mm Hfsdpfox I Abmjx Ahueb

Condition: new, Year of construction: 2025, working width 1500 mm workpiece width - max. 0,5 - 50 mm dimensions 3300 x 1500 x 1800 mm feed stepless 0-4 m/min total power requirement 20,4 kW Hfsdpfx Aex H Tvfehueb weight of the machine ca. 2800 kg The SBM-L G1S2 grinding and deburring machines were developed for double-sided deburring and edge rounding of workpieces in a single operation. LISSMAC machines are used for deburring sheet metal and processing sheet metal parts, laser parts, and stamped parts. The L series is equipped with three units on the top and bottom . Workpieces made of stainless steel, steel, aluminum or non-ferrous metal can be processed on the top, bottom or both sides. Processing sheet metal on both sides and rounding edges in a single operation saves up to 60% in time. It is also possible to easily connect automation solutions or integrate the machine into production lines. The machine design ensures ergonomic working and a pleasant working environment without dirt, dust, or noise pollution. Consisting of: - SBM-L 1500 G1S2 evo grinding machine - 4x SBM 1500 grinding belts with P60 Co web - 2x SBM-L 1500 grinding belt L=4123 W=70 P80 Co - SBM-M/L 1500 sound insulation - LIServ 4.0 package evo - Camera set MP - Dry extraction DDE 3002 - Standard piping DDE 3002 The machine is available for immediate delivery from our warehouse in Niederlangen.

Condition: used, Year of construction: 2023, machine/vehicle number: SN056444, 12 months warranty. Hfedpfxex Hua So Ahujb

Condition: ready for operation (used), Year of construction: 2000, working width: 1,300 mm, total height: 2,240 mm, overall weight: 2,300 kg, product length (max.): 2,070 mm, General Data Machine weight 2300 kg Measurements height 2240 mm Dimensions Machine Length 2070 mm Technical Specification Working Width 1300 mm This Fladder 300 Gyro was manufactured in 2000. It features a working width of 1300 mm, six brush heads, and a rotating and oscillating sanding unit. Equipped with two vacuum fans and a vacuum conveyor belt, it ensures efficient material handling. The motor power is 7.5 kW, and it offers an infinitely variable feed speed of 2 - 8 m/min. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery Hfodpfx Ajx D E Hzehuob

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 1400 mm Measurements depth 2600 mm Measurements height 1800 mm Hodpfx Aex D R Iqohusfb Machine weight 2000 kg Additional Equipment Aperture Width: 1000 mm Material Throughput: Automatic Adjustment Medium: Electrical brush block This LISSMAC SBM-M 1000 B2 deburring machine was manufactured in 2012. It features an automatic material throughput with an aperture width of 1000 mm and can handle sheet thicknesses up to 20 mm. The machine is equipped with a powerful brushing motor and offers an infinitely variable feed adjustment. Weighing 2000 kg, it's designed for robust and precise deburring operations. If you are looking to get high-quality deburring capabilities consider the LISSMAC SBM-M 1000 B2 machine we have for sale. Contact us for more information. Application Types Grinding

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 1400 Measurements depth 3100 Measurements height 1800 Machine weight 2300 Main Drive Hfjdpjx D Sbxjfx Ahuob Spindle speed range 1415 Maximum sheet thickness 20 mm This LISSMAC SBM-M 1500 B2 deburring machine was manufactured in 2014. Ideal for efficient deburring applications, it ensures consistent quality and performance. Consider the opportunity to buy this LISSMAC SBM-M 1500 B2 deburring machine. Contact us for more information. Application Types Other Sheet Metal Machinery

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 5300 kg This TIMESAVERS 41serie 900 WRD N was manufactured in 2006. It features a 900 mm working width and can handle sanding heights up to 60 mm. The table adjusts from 0 to 80 mm, supporting various material sizes. Ideal for consistent deburring applications. Contact us for more information. Hsdpex D S A Nsfx Ahuefb Application Types Other Sheet Metal Machinery

Condition: used, Year of construction: 2025, machine/vehicle number: SN075105, 12 months warranty Hfjdpfx Ahex A Tpzeuob

Condition: used, Year of construction: 2024, machine/vehicle number: SN071679, 12 months warranty, 1800 operating hours Hsdpfx Ahsx A Tgmsusfb

Condition: excellent (used), Year of construction: 2018, operating hours: 1,950 h, Model: Timesavers Grindingmaster 81-Series-2100-W Year: 2018 Operating Hours: 1,950 h Configuration: High-performance wide belt grinding with fixed table and Siemens control. Hjdpfjxxznkox Ahusfb Capacity & Working Dimensions Min. Dimensions (LxWxH): 600 x 600 x 10 mm. Max. Dimensions (LxWxH): 1680 x 1830 x 30 mm. Max. Workpiece Weight: 250 kg. Machine Opening: 1 - 100 mm. Grinding Unit (Head 1) Contact Roller: Ø 280 mm, 70° Shore Ni 37 45. Main Motor: 90 kW. Belt Speed: 8 - 22 m/sec (frequency controlled). Rotation: 2 directions. Belt Dimensions: Length 2620 mm x Width 2130 mm. Oscillation: Electronic, adjustable (2130, 1600, or 1380 mm).

Condition: used, Year of construction: 2020, Opportunity to purchase this LISSMAC deburring machine (Y2020) with working width of max. 1500 mm and sheet metal thickness from 0,5 mm to 50 mm. This machine is in very good condition with 2900 working hours and it can be inspected under power upon appointment. Additional equipment: o dry vacuum unit o 2 x 2000 m conveyor belts Availability: 11/2025 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Max. thickness: 0.5 - 50.0 mm Operating voltage: 400 V 50 Hz Hodpfx Ahexxykqoujfb Max. width: 1500 mm Speed: 0-4 m/min Rated current: 82 A Rated power: 44.5 kW Operating hours: 2900 Weight: 4200 kg Machine dimensions (LxWxH): 3600 x 2100 x 2000 mm

Condition: used, Year of construction: 2023, intake manifold diameter: 250 mm, power: 4 kW (5.44 HP), Used extraction system with 4 kW power, in very good condition and inspected by the manufacturer. All filters have been replaced. Hjdpfjxw Ik Aex Ahujfb

Condition: as good as new (ex-display), Year of construction: 2025, working width: 1,100 mm, sheet thickness (max.): 100 mm, The 32 RB series offers the solution for manufacturers delivering premium-quality products. This top quality is achieved by a multi-rotating brush unit with four abrasive lamella brushes, which evenly deburr and perfectly round the edges of the metal. Multi-directional rotary brush deburring machine (RB) for consistent deburring and finishing of flat sheet metal parts. All-around processing in a single pass, providing the part's surface with a non-directional finish. Equipped with one (or more) abrasive belt units (W) for pre-deburring and final finishing. - Abrasive belt unit - Rotary brush unit (self-calibrating) Hodpfxexw Ikco Ahujfb - Abrasive belt unit

Condition: as good as new (ex-display), Year of construction: 2025, working width: 1,525 mm, sheet thickness (max.): 100 mm, overall weight: 6,400 kg, The 42 series provides the solution for manufacturers who deliver premium quality products. This top-level quality is achieved by a multi-rotating brush unit with 8 abrasive flap brushes, which perform uniform deburring and produce perfectly rounded metal edges. This is a multidirectional rotary brush machine (RB) for consistent deburring and finishing of flat metal parts. It enables all-round processing in a single pass, giving the workpiece a non-directional surface finish. Equipped with one or more abrasive belt units (W) for pre-deburring and fine grinding. Cup brush unit (TB) for deburring, edge breaking, non-directional finishing, or removal of scale. Hfedpfjxw Ih Ujx Ahuob - Abrasive belt unit (self-calibrating) - Cup brush unit (self-calibrating) - Rotary brush unit with 8 brushes (self-calibrating)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, nominal power: 11 kW (14.96 HP), Wet extraction for metallic dusts with 11kW and approx. 6000 m³/h. Demonstration machine in very good condition. Hsdpfx Ajxw Ib Iehujfb