Semix Industry Pazarlama Diş Ti̇c. A.ş.

Condition: used, Year of construction: 2021, total length: 3,050 mm, load capacity: 790 kg, - Standardbereifung 23x8.50-12”grass/TR - Kraftübertragung Hydrostatischer Fahrantrieb - Schubkraft 700 kp - Fahrgeschwindigkeit 12 km/h - Hydrauliköltank, Füllmenge 26 l Dodpfx Aexg Tgbocwecn - Hydraulikölspezifikation ISO VG 46 - Zusatzhydraulik 34 l/min 185 bar - Wenderadius innen/außen 880 / 1970 mm - Hand-Arm-Vibration, Total < 2,5 m/s² - Ganzkörpervibration, max. < 0,5 m/s²

Condition: used, Year of construction: 2019, total length: 9,465 mm, Construction machinery Dcodpfx Aexd Hycscwsn Volvo ECR235EL Drive No Drive Year built 2019

Condition: new, Year of construction: 2021, total length: 3,050 mm, load capacity: 790 kg, - Standardbereifung 23x8.50-12”grass/TR Djdpexd Hw Usfx Acwocn - Kraftübertragung Hydrostatischer Fahrantrieb - Schubkraft 700 kp - Fahrgeschwindigkeit 12 km/h - Hydrauliköltank, Füllmenge 26 l - Hydraulikölspezifikation ISO VG 46 - Zusatzhydraulik 34 l/min 185 bar - Wenderadius innen/außen 880 / 1970 mm - Hand-Arm-Vibration, Total < 2,5 m/s² - Ganzkörpervibration, max. < 0,5 m/s²

Condition: used, Year of construction: 2021, total length: 2,660 mm, · Fahrwerk hydraulisch verstellbar auf eine Breite 98 cm eingefahren und bis auf 136 cm ausgefahren. · Der E17 besitzt einen reduzierten Heckschwenkradius · Betriebsgewicht 1711 kg · Grabtiefe 2.2 m · Motorleistung 10.2 kW · Ausbrechkraft beim Graben 9108 N · Heckschwenktyp CTS · Löffelkippwinkel 196.00 ° · Maximale Reichweite mit Löffel 3919.00 mm · Maximale Reichweite auf Bodenhöhe 3871.00 mm · Maximaler Radius des Löffels bei maximal angehobenem Ausleger und voll angezogenem Löffelstiel 1526.00 mm · Maximale Planierschildhöhe 220.00 mm · Maximale Planierschildtiefe 204.00 mm · Maximale Höhe des Löffels mit angezogenem Löffelstiel 2405.00 mm · Löffelhöhe, ausgekippt 3371.00 mm · Löffelhöhe, angekippt 2370.00 mm · Maximale senkrechte Grabtiefe 1810.00 mm · Maximale Grabtiefe 2249.00 mm Dcsdsxd E Sqspfx Acwon · Pumpentyp Dreifach-Zahnradpumpe · Förderleistung 32.50 L/min · Zusatzhydraulik 32.50 L/min · Zusatzhydraulikablass 227.0 bar · Reißkraft (ISO 6015)9108.00 N · Losbrechkraft (ISO 6015) 16177.00 N · Deichsel-Zugkraft 14334.0

Condition: new, Year of construction: 2023, total length: 3,458 mm, load capacity: 3,150 kg, Construction machinery Manitou MLA 3-25H Drive Diesel Year built 2023 Lifting weight (kg) 3,150 Djdexd E I Ejpfx Acwocn

Condition: used, Year of construction: 2020, total length: 4,760 mm, Construction machinery Volvo L 30G Drive Diesel Year built 2020 Dcedsxd E Ixepfx Acwsn

Condition: new, Year of construction: 2023, total length: 2,928 mm, load capacity: 2,500 kg, Construction machinery Manitou MLA 2-25H Drive Diesel Year built 2023 Lifting weight (kg) 2,500 Dedpfx Asxd Euljcwocn

Condition: used, functionality: fully functional, Year of construction: 2018, 1 piece Atlas Copco LP 9-20 Hydraulic Power Pack Model: LP 9-20 Engine: 9 HP Honda Petrol Engine Weight incl. oil: 76 kg Dimensions (LxWxH): 605 x 505 x 620 mm Oil flow: 20 l/min Max. Pressure: 150 bar Fuel tank capacity: 6 l Hose included: Yes Power on Demand (POD): Yes Oil regulation: Engine oil: Yes Electric start: No Guaranteed sound power level Lw: 101 dB(A) Sound pressure level Lp (at 1m): 87 dB(A) 1 piece Atlas Copco LS 14 Hydraulic Cut-off Saw 355 mm Model: LS 14 Weight with hoses: 12 kg Oil flow: 20 - 30 l/min Max. Pressure: 172 bar Speed: 2500 - 4000 rpm Cutting speed: 46 - 75 m/s Blade size: 355 mm Arbor size: 25.4 mm Cutting depth: 133 mm Vibration level (3 axes): 4.9 m/s² Guaranteed sound power level Lw: 108 dB(A) Sound pressure level Lp (at 1m): 94 dB(A) EHTMA Class: C/D 1 piece Atlas Copco LPP 10 Hydraulic Pile Puller Model: LPP 10 HD Weight: 60 kg Oil flow: 20 - 40 l/min Max. operating pressure: 172 bar Max. return pressure: 30 bar Stroke per cycle: 12 – 2000 mm Pulling force: 6000 kg Max. pulling force: 10000 kg EHTMA Class: C/D/E 1 piece Atlas Copco LCD 1500 Hydraulic Core Drill Model: LCD 1500 Weight without hoses: 9 kg Oil flow: 20 - 30 l/min Length (without drill): 406 mm Operating pressure: 60 - 120 bar Speed: 1500 - 2250 rpm Drilling diameter: 12 – 75 mm Internal thread (drive): 0.5" BSP Vibration level (3 axes): 2.7 m/s² Sound pressure level Lp: < 70 dB(A) EHTMA Class: C/D 1 piece Atlas Copco LPD-RV Hydraulic Pile Driver Model: LPD-HD-RV Activation: Via remote valve Hydraulic system: Open or closed center Weight with hoses: 40 kg Drive force: 70 – 150 mm Operating pressure: 105 – 125 bar Oil flow: 28 – 40 l/min Blow frequency at 30 l/min: 1320 bpm Hydraulic connections: 1/2" BSP Vibration level (3 axes): - Guaranteed sound power level Lw: 118 dB(A) Sound pressure level Lp (at 1m): 105 dB(A) EHTMA Class: D/E 1 piece Atlas Copco LH 190 E Hydraulic Breaker Model: LH 190 E Weight: 25 kg Length: 650 mm Oil flow: 20 l/min Operating pressure: 95 – 110 bar Dodpfx Acjxc Ewkewocn Max. return pressure: 10 bar Blow frequency: 1400 bpm Vibration level (3 axes): 5 m/s² Guaranteed sound power level Lw: 106 dB(A) Sound pressure level Lp (at 1m): 93 dB(A) EHTMA Class: C

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, Mini dumper Schäfer C6.60 with self-loading shovel Payload: 500 kg Year of manufacture: 2020 Dsdpfexb Ammex Acwocn Operating hours: 290 h Engine: Yanmar diesel Electric start Transport hook Immediately available and ready for use.

Condition: new, functionality: fully functional, power: 1.7 kW (2.31 HP), fuel type: gasoline, color: yellow, overall weight: 24 kg, Year of construction: 2025, Equipment: UVV, Wacker Neuson Petrol Breaker BH 65* - NEW -! Weight: 24 kg, 2-stroke petrol engine WM 80c with 1.7 kW power, percussion rate 1,250 bpm. Other sizes available! Machine location: Warehouse D-46514 Schermbeck. *Transport trolley and chisels are shown for illustration purposes only and are not included in the scope of delivery. _____ Wacker Neuson BH 65 for sale | 2-Stroke Petrol Breaker | Wacker BH65 Demolition Hammer | Road Construction Petrol Breaker | Cordless Demolition Hammer | Handheld Petrol Breaker | Concrete Hammer for Constructions Sites | Wacker Hammer new | Buy Petrol Demolition Hammer | Cordless Site Hammer — Highlights & Advantages: ✔️ Autonomous demolition hammer – ideal for jobsites without electrical power supply ✔️ Compact & portable – only 24 kg weight ✔️ High impact rate with 1,250 blows/min ✔️ Low-maintenance WM 80 engine – designed for tough construction site conditions ✔️ Ready for use without compressor or electricity ✔️ Ergonomic & vibration-damped – operator-friendly ✔️ Made by Wacker Neuson – professional quality — Typical applications: -Road construction / pavement repairs -Concrete and asphalt demolition -Civil engineering & pipeline construction -Fiber optic installation -Fence foundations, breakthroughs, minor demolition work -Landscaping & horticulture Dcodpfxsw T U Tdo Acwjn -Municipalities, construction yards, equipment rental companies

Condition: new, functionality: fully functional, Year of construction: 2025, Handheld petrol post driver by CHRISTIE, professional-grade pile driver. Premium brand. Made in Australia. The CHRISTIE handheld petrol post driver, manufactured in Australia, is designed for driving posts and piles, suitable for all types of square or round profiles from 84 mm to even 150 mm in diameter. Please always specify which adapter you need; we will provide the appropriate one. This post driver is used for installing posts for PV panel installations, road barriers, pipes, profiles, road signs, fencing, etc.—ideal for intensive professional applications. Super lightweight yet extremely durable and ergonomic. Years of experience from Australian engineers in pile driving are applied in this best-in-class handheld post driver. Advantages of the CHPD78 model: - Portable: no need for hoses or generators, only 14.5 kg with interchangeable guide parts up to 16 kg. - Ideal for steep or hard-to-access terrain. - Significantly reduced physical effort compared to conventional methods. - Can be used all day without causing excessive operator fatigue. - Drives up to 500 posts on a single litre of petrol. - Supplied in a compact plastic case. - Shock-absorbing handles. Please provide information about the profiles, posts, and materials to be driven so we can select the suitable sleeves for you. Technical Specifications: Weight: 14.5 kg Impact energy: 26 Joules Blows per minute: 1720 Power: 1.1 kW (1.3 HP) at 7000 rpm Engine: 4-stroke, overhead camshaft, HONDA GX35, 4T Petrol Accelerator trigger on handle Fuel consumption: 0.71 l/hour Starting system: recoil starter Noise level (hearing protection required): > 100 dB Retail price list – reference drawing for price list positions. All prices are net. Petrol post driver, CHRISTIE CHPD78 model, basic model supplied with Ø 84 mm guide sleeve: 3,300 EUR net Djdpfxjw Rvvhj Acwscn 1. Extended handles (60 cm) for gripping the driver: 400 EUR net 2. Aluminium adapter, choice of Ø 100/107 or 150 mm: 190 EUR net Aluminium square adapter 90 mm x 90 mm: 190 EUR net 3. Aluminium reducer for standard Ø 84 mm guide, adapter for posts Ø 10–50 mm: 110 EUR net 4. Teflon reducer for aluminium guide for posts Ø 50–107 mm: 140 EUR net 5. Set of aluminium adapters for aluminium guide for posts Ø 107 mm, plus reducers for Ø 95, 85, and 75 mm: 400 EUR net 6. Wooden transport case with handles: 220 EUR net 7. Service kit with gaskets, spare spark plug: 90 EUR net Items 8, 9, 10 for soil sampling attachments—price on request.

Year of construction: 2023, condition: used, Top condition – with warranty (without suction plates) Price: On request The all-rounder enables effortless, precise, and cost-effective handling of concrete and natural stone elements weighing up to 140 kg thanks to the integrated vacuum hose lifting technology. Suitable for kerbstones, concrete slabs, natural stone slabs, concrete paving stones, channel plates, wall stones, and more. A general product description (including photos/application videos) and technical data can be found on our Optimas website. The images are exemplary representations and not pictures of the actual products for sale. If interested, please feel free to contact us by phone or email at any time. Dcjdow Hyt Dopfx Acwsn

Year of construction: 2023, condition: used, Optimas joint-filling device for paving stones (for wheel loader attachment) Year of manufacture: 2023 USED* Good condition. Price ex works: On request. The Optimas joint filling device for wheel loaders is ideal for sweeping in joint material into paving joints on medium and large paving surfaces. The photos are for illustrative purposes only and do not show the products offered for sale. Dcodpsw Hyprefx Acwjn A general product description (including photos/application videos) and technical data can be found on our website. If interested, please feel free to contact us by phone or email at any time.

Year of construction: 2023, condition: good (used), Top condition – with warranty Special equipment available on request. Price: On request The ideal attachment for wheel loaders to evenly distribute material such as concrete, asphalt, bulk goods (sand, grit, gravel, topsoil, salt, etc.) via a conveyor belt. Possible areas of application include road construction, pipeline and sports field construction, as well as municipal use. Dedjw Hycrepfx Acwscn Cost-effective alternative to a berm paving machine. General description (including photos and application videos) and technical data for the product can be found on our Optimas website. The photos are for illustrative purposes and do not show the actual products for sale. If you are interested, please feel free to contact us at any time by phone or email.

Year of construction: 2024, condition: as good as new (ex-display), Paver Clamp Multi6 M for various carrier Year of manufacture: 2024 Good condition. Dodpsw Hyaqefx Acwocn Feature: 3K control system Price: On request Optimas offers you a cost-effective start. Flexible for mounting on all common construction machines. The photos are exemplary images and not pictures of the products for sale. products for sale. For further information (photos, videos and technical datas) visit our website. Please contact us for more details at any time by phone or email.

Year of construction: 2023, operating hours: 440 h, condition: used, functionality: fully functional, -Used machine- The machine and gripper have been technically and visually refurbished – with warranty. Including equipment package “Basic + Comfort” Price: On request Djdpfxew Hx T No Acwecn The photos are sample images and do not show the actual products for sale. If you are interested, please feel free to contact us by phone or email at any time.

Condition: like new (used), Year of construction: 2017, Vágóerő:4 kW.Légkompresszor:4 kW Méret (mm):12300*1300*2300.Súly 2600kg Dcjdjw Abp Sjpfx Acwsn R6-os típusú is van eladó 9000 euró. Műszaki adatok: 1 db köracél:4-12 betonacél 4-12, 2 db(dupla)köracél 4-10 betonacél 4-10, Maximális hajlítási szög:180°, Kengyel oldalhossz (mm):min: 60 max 1200, Etető szervo: 20 kW. Hajlító szervo:7,5 kW, Vágóerő:4 kW. Légkompresszor:4 kW, Méret (mm):1268*1050*2100. Súly 2122 kg

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), fuel type: hybrid, color: yellow, overall weight: 55,000 kg, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-75 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrated grizzly feeder, 1070x760 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 150-300 tph Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: -Model: FTJ 11-75 -Production Capacity: 150 – 300 tons per hour -Maximum Feeding: 700 mm -Crusher Type: Jaw Crusher -SIZE: 1070x760 mm -Generator: 300 kva -CSS Setting: 45 – 160 mm -Weight: 55000 tons Dcsdpfx Aewx Hdaecwen -Dimensions: 2900x3500x14.500mm – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2025, condition: new, functionality: fully functional, For over 30 years, we have been manufacturing concrete power trowels, now available in 11 different types. We offer both 230V mains-powered and battery-operated models (battery and charger included), with single or dual speed settings. Dcjdpfowvhu Usx Acwon Lightweight Power Trowel for Resin and Concrete based on American NAC drive system. Two-speed drive + smooth electronic adjustment. First gear: 180–400 rpm. Second gear: 300–700 rpm. Power: 1800W. Works with discs up to 48 cm, a 50 cm spider with blades, and a convex disc for concrete finishing in Heide parks (we manufacture such discs), bush-hammering, polishing, and brush cleaning attachments. Wide handle adjustment, LED lamp, indicator lights, safety switch, small disc included. Extremely convenient for smoothing concrete in hard-to-reach areas, balconies, small rooms, and on vibration tables. Net Prices: Lightweight battery-powered trowel (Vander), two speeds + electronic speed adjustment (Vander) – 3,350.00 PLN (EUR 798) Lightweight single-speed battery-powered trowel with smooth speed control – 2,900.00 PLN (EUR 690) Handheld dual-speed battery-powered trowel (Vander) + electronic speed regulation – 1,450.00 PLN (EUR 345) Handheld single-speed battery-powered trowel with smooth speed control, complete set – 920.00 PLN (EUR 219) NAC lightweight trowel, two speeds + electronic shifting, with small disc included – 3,350.00 PLN (EUR 798) Hikoki handheld trowel, 2 speeds (150–650 rpm) + electronic speed adjustment, 1200W, with small disc – 1,100 PLN (EUR 262) Hikoki handheld trowel, 2 speeds (150–650 rpm) + electronic speed adjustment, 1600W, with small disc – 1,250 PLN (EUR 298) NAC (USA) handheld trowel, 2 speeds (180–400; 300–700 rpm) + electronic speed adjustment, 1800W, with small disc – 1,250 PLN (EUR 298) Handheld single-speed trowel with small disc – 790.00 PLN (EUR 188) Handheld single-speed trowel with small disc, 0–970 rpm, 2800W – 830.00 PLN (EUR 198) Handheld trowel for concrete and plaster. VIBRATING. Vibrating plate 20x28 cm. Power 370W/2840 oscillations – 750 PLN (EUR 179) FINISHING DISCS – convex 38–42 cm, for Heide Parks – 200 PLN (EUR 48) 400/2.5 mm stainless steel disc – 230 PLN (EUR 55) 400/3 mm disc with rounded edge – 220 PLN (EUR 53) 47 cm/3 mm disc with rounded edge – 230.00 PLN (EUR 55) 47 cm/3 mm disc, stainless steel – 260 PLN (EUR 42) 60 cm disc, stainless chrome steel (2.5 mm) – 310.00 PLN (EUR 74) 60 cm disc, 3 mm steel (no edge) – 250.00 PLN (EUR 60) '600' disc with Velcro (for attaching sandpaper or polishing pads) – 350.00 PLN (EUR 83) 40–50 cm disc, without edge – 150.00 PLN (EUR 36) MOUNTING HEAD, 160 mm diameter, stainless, for attaching diamonds, brushes, bush-hammering tools. Can be mounted to angle grinders, lightweight and handheld – 350.00 PLN (EUR 83) Mounting head, 215 mm diameter, stainless, for attaching 6 diamonds, brushes, bush-hammering tools. Can be mounted to angle grinders, lightweight and handheld – 400.00 PLN (EUR 95) SPIDER (CROSS) with 6 arms, 3 mounting holes (50 cm) – 360.00 PLN (EUR 86) BLADES or plastic pads with 3 holes, 0.5 mm steel – 26.00 PLN (EUR 6) Blades or plastic pads with 3 holes, 1.0 or 1.5 mm steel – 28.00 PLN (EUR 7) BUSH-HAMMER TOOL – complete double-row stainless steel bush-hammer attachment – 160 PLN (EUR 38) Feel free to contact us by email. We operate 24/7.

Year of construction: 2025, condition: new, The manual trowel for finishing concrete floors is a practical tool for smoothing concrete in hard-to-reach areas. We manufacture in two versions – single-speed and two-speed. Available in 230V electric and battery-powered versions. Also perfectly suited for grinding terrazzo on stairs. We have been manufacturing trowels for over 25 years. Currently, we produce trowels in 11 types, both 230V electric and battery-powered. In the past, we have completed thousands of square meters of flooring and we understand what flooring contractors need and what can make their demanding work easier. We value user feedback and implement changes promptly. Our production process follows the Kaizen method. Kaizen, meaning "change for the better" (in Japanese, "kai" means change and "zen" better), is a philosophy and management method that emphasizes continuous improvement of processes and company operations. It involves systematically introducing small but regular changes that lead to gradual and lasting improvements. As a result, our products are durable and convenient to use. Our trowels can be used to finish concrete with a disc, smooth with a spider fitted with metal or plastic blades, grind with diamonds or corundum, bush-hammer, clean old concrete with brushes, or even refurbish surfaces to look newly installed; they are also suitable for terrazzo stairs and floor grinding. Dedpfswt Ix Isx Acwecn We also produce special universal plates for mounting various tools manufactured by us. Goods are shipped by cash on delivery, prepayment, or can be picked up in Poznań. Our finishing discs are made exclusively from certified 3 mm black or stainless steel sheet. Net prices: Two-speed battery-powered manual trowel (Vander) with electronic speed control – 1450.00 PLN Battery-powered manual trowel with stepless speed regulation, complete set – 920.00 PLN NAC trowel, lightweight, two speeds + electronic speed change, small disc included – 3350.00 PLN Hikoki manual trowel, 2 speeds (150-650 rpm) + electronic speed control, 1200W, includes small disc – 1100 PLN Hikoki manual trowel, 2 speeds (150-650 rpm) + electronic speed control, 1600W, includes small disc – 1250 PLN NAC (USA) manual trowel, 2 speeds (180-400; 300-700 rpm) + electronic speed control, 1800W, includes small disc – 1250 PLN Single-speed manual trowel with small disc – 790.00 PLN Single-speed manual trowel with small disc, 0–970 rpm, 2800W – 830.00 PLN Manual concrete and plaster trowel. VIBRATING. Vibrating plate 20x28 cm. Power 370W/2840 vibrations – 750 PLN Lightweight battery-powered trowel (Vander), two speeds + electronic speed adjustment (Vander) – 3350.00 PLN Lightweight battery-powered single-speed trowel with stepless speed adjustment – 2900.00 PLN

Year of construction: 2025, condition: new, The lightweight battery-powered power trowel (11 kg) is a practical, convenient machine for smoothing small concrete surfaces, even in hard-to-reach areas. It can also be used for grinding, cleaning, polishing, or smoothing concrete on vibrating tables. We manufacture both single-speed and two-speed versions. We have been manufacturing power trowels for over 25 years. Currently, we produce power trowels in 11 different types: electric 230V and battery-powered. Having installed thousands of square meters of flooring in the past, we know what flooring companies need and what can help make the challenging work of floor specialists easier. We value user feedback and implement changes quickly. We employ the Kaizen method in our production. Kaizen, which means “change for the better” (in Japanese, “kai” means change and “zen” means better), is a philosophy and management method focusing on the continuous improvement of company processes and operations. It involves systematically introducing small, regular changes that lead to gradual, yet lasting improvements. Thanks to this approach, our products are durable and user-friendly. Our trowels can be used for disc troweling concrete, smoothing with a cross-arm fitted with metal or plastic blades, diamond or corundum grinding, bush hammering, cleaning old concrete with brushes, even refurbishing it to look as good as new, or grinding terrazzo stairs and floors. Additionally, we produce special universal discs compatible with many of our tools. Goods are shipped by cash on delivery, pre-payment, or can be collected in Poznań. We manufacture the finishing discs exclusively from 3 mm quality black or stainless sheet steel. Net prices LIGHTWEIGHT battery-powered TROWEL (Vander), two speeds + electronic speed control (Vander) - 3350.00 PLN Lightweight battery-powered single-speed trowel with smooth speed adjustment - 2900.00 PLN Handheld two-speed battery trowel (Vander) + electronic speed adjustment - 1450.00 PLN Handheld battery trowel with smooth speed adjustment, complete set - 920.00 PLN "400" disc included We operate 24/7 Please feel free to contact us by email We ship cash on delivery, prepayment, or personal collection from Poznań. Djdswt Iq Dopfx Acwecn

Condition: new, We manufacture expansion joints from high-grade steel sheet, thickness 3 mm. Preferred sections of two metres. Minimum order quantity: 20 linear metres. The profile is designed to ensure strong anchoring in concrete. At the same time, it can serve as a formwork between successive concrete pours. We produce to order and adapt to the floor thickness. Surfaces not in contact with concrete are coated with waterproof paint. OPTION FOR STAINLESS STEEL PRODUCTION We can also deliver a partially or fully hot-dip galvanized version. The price depends on the height of the ordered expansion joint, adapted to the floor thickness. At the bottom of the expansion joint, we can add a geotextile skirt to prevent concrete from getting behind the formwork. Prices are quoted net. A prepayment of 70% of the gross order value is required upon ordering. After payment, we issue a VAT invoice. Production time is progressive, for smaller quantities up to three weeks. Dcodpswt Ihcjfx Acwen Example net price for expansion joint of 40 cm height – PLN 295.00/linear m Example net price for expansion joint of 25 cm height – PLN 235.00/linear m Prices may change. We also manufacture pneumatic dispensers for dispersed concrete reinforcement, expansion joint cord inserters, expansion cut cleaning machines, several types of chamfering machines for expansion cuts, power trowels, and concrete discs.

Year of construction: 2025, condition: new, 1. Electric Power trowel 1.1 kW/230V (220V), non-extendable handle, LED lamp, safety switch, „600” disc included, free wheels – 3899 PLN =EUR 917,40 2 – elestric power trowel ZDJ60E 1.1 kW, galvanized, disc with extended and removable handle included, rectangular guard – PLN 4012 =EUR 944 3 – electric power trowel ZDJ60E 1.1 kW with round cover, non-foldable handle, galvanized, disc included – PLN 4125 (additionally powder coated, PLN 136 more expensive) =EUR 970,59 4 – elestric power trowel ZDJ60E 1.1 kW with round sliding cover, removable handle – PLN 4125 =EUR 770,59 5 – electric power trowel ZDJ60E 1.5 kW, disc included (33 kg without disc) – PLN 4238 (additional, second LED lamp on the engine + PLN 113) =EUR 977,18 6 – electric power trowel ZDJ60E 1.5 kW, with round cover, disc included – PLN 4351 (additionally powder coated, PLN 136 more expensive) =EUR 1023,77 7 – 1.1 kW power trowel for prefabricated elements (27 kg/31 kg) with disc – PLN 4238 =EUR 997,18 8 – Concrete trowel for prefabricated elements with disc, weight 35 kg – PLN 4,159 =EUR 978.59 9 – NAC trowel, lightweight, two speeds + electronic speed change, small disc included – PLN 3786 =EUR 890,82 10 – Hikoki hand power trowel, 2 speeds (150-650 rpm) + electronic speed change, 1200 W, with small disc – PLN 1243 =EUR 292,47 11 – Hikoki hand power trowel, 2 speeds (150-650 rpm) + electronic speed change, 1600 W, with small disc – PLN 1413 =EUR 332,47 12 – NAC hand power trowel (USA), 2 speeds (180-400; 300-700 rpm) + electronic speed change, 1800 W, with small disc – PLN 1413 = EUR 332,47 13 – Single-speed hand power trowel with small disc – PLN 893 =EUR 210,12 14 – Single-speed hand power trowel with small disc, 0-970 rpm, 2800 W – PLN 938 =EUR 220,71 15 – Hand trowel for concrete and plaster. VIBRATORY. Vibrating plate 20X28 cm. Power 370 W/vibr. 2840 – 848 PLN =EUR 199,53 SMOOTHING DISCS – convex 38-42 cm, for HeideParks – PLN 226 =EUR 53.43 smoothing disc 47 cm/3 mm with rounded edge – PLN 260 =EUR 61,15 smoothing disc 47 cm/3 mm, stainless steel – PLN 294 =EUR 69,13 smoothing disc 60 cm made of stainless steel chrome (2.5 mm) – PLN 350 =EUR 82,42 60 cm smoothing disc made of 3 mm sheet metal (and without a rim) – PLN 283 =EUR 66,47 „600” disc with Velcro (for attaching sandpaper or polishing discs) – PLN 396 =EUR 93,06 Smoothing disc 40 – 50 cm, without rim or with rim – PLN 170 =EUR 39,88 65 cm/3 mm smoothing disc as above (flat, rounded edge) – PLN 328 =EUR 77,11 70/3 disc (with or without crown) hooks or screws) – PLN 316 =EUR 74,45 Smoothing disc 75 cm with hooks or screws – PLN 339 =EUR 79,76 80 cm floating disc with hooks or screws – PLN 373 =EUR 87,74 90 cm floating disc universal (right/left) – PLN 429 =EUR 101,04 as above but white (from chrome sheet) – PLN 746 =EUR 175,48 As above, but single-sided – PLN 215 =EUR 50,52 As above, but double-sided made of stainless steel (for single) – PLN 260 =EUR 61,15 As above, but double-sided for „900” self-propelled – PLN 283 =EUR 66,47 UNIVERSAL DISC for fastening segments – 400×5 made of stainless steel – PLN 542 =EUR 127,72 universal disc for fastening segments – 500×5 made of stainless steel – PLN 520 universal disc „600” made of carpet (for polishing) – PLN 25, thicker – PLN 40.00 Djdpfxjwt H Tdo Acwocn That is why we provide a 5-year warranty for all our concrete trowels type ZDJ60E from 1.08.2017

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 1, This machine is popular and NECESSARY in many different plants. Djdpfewt Hfaex Acwjcn Thoroughly shreds and feeds dispersed reinforcement WE HAVE PRODUCED A NEW, IMPROVED VERSION The net prevents larger objects (parts of cartons, bags) from falling into the chute, and also eliminates the need to use an adhesive vibrator, although it is possible to install it. We have outboard vibrators in stock) Convenient to use and transport. It prevents the formation of „hedgehogs” in concrete. Suitable for work in concrete batching plants and on the construction site, when feeding reinforcement, fibre and plasticizers directly into the concrete truck. Easy to transport. It consists of: a blower on wheels, a 5.5 kW/400V motor and a mesh on which the reinforcement is placed, a transport pipe with a diameter of 14 cm (pipe in two parts (easier to transport), 2 90-degree elbows and an end elbow made of two rods supporting the pipe. This dispenser is made in such a way that it consists of many stable segments, easily dismantled, but guaranteeing high durability. It is easy and less expensive to replace each component in the event of damage or wear. Despite this, it is very rigid. Where possible, we have tried to make connections with identical flanges. In practice, we have only two types of flanges – one type for pipes (round), the other rectangular, for connecting individual parts of the machine.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 1, Electric Concrete Grinders Our concrete and terrazzo grinders are versatile and meet the expectations of every customer, even the most demanding ones. The terrazzo grinder is made from the highest quality materials, ensuring durability and long service life. We understand that a concrete floor grinder must be efficient and reliable. Our range of concrete grinders meets these criteria—our clients have tested them in many different situations and they have proven themselves time and again. Your satisfaction is our priority; that's why we focus solely on proven and appreciated solutions. How should you grind concrete or terrazzo? Definitely with a grinder from our store! Concrete Grinders – For Dry and Wet Operation These grinders feature a 2.2 kW (also available in 3 kW) / 230 V motor, 120 rpm, and a cylindrical gear reducer. They are designed to work with kidney-shaped grinding discs — 400 mm or 500 mm diameter discs. Some models are also equipped with a water tank, which can be used to adjust the machine’s weight, and a quick-connect fitting for easy water supply via a hose. The entire machine is galvanized, fitted with an LED lamp, and adjustable handle for maximum operating comfort. The concrete floor grinder also includes a safety switch, indicator lights, and two vacuum ports. In short, it's ideal for use with corundum blocks, diamond tools, as well as for grinding and renovating concrete floors, cleaning, restoring old concrete, and polishing terrazzo. WE MANUFACTURE: Electric concrete grinders manufactured by Dekor PUHB Poznań. Disc diameter: 405 or 500 mm. Compatible with various grinding discs, including those produced by Dekor. 2.2 kW/230V motor. Fully galvanically zinc-plated. Capable of dry or wet operation. Vacuum connection possible. Wide handle adjustment. Diameter 405 mm, 120 rpm. Discs not included in the set. We offer a wide selection of discs, which are sold separately (prices and photos available on our company website). We also have diamond segments straight from the diamond and segment manufacturer in a wide range, as well as diamond segments for bush hammering floors before resin application, and universal discs for mounting diamonds… Dcedpfxswt Dqmo Acwon Net prices: Grinder SD40 1.5 kW/230 V – price: 6,400.00 PLN Grinder SD40 2.2 kW/230 V – price: 6,900.00 PLN Grinder SD50 2.2 kW/230 V – price: 8,000.00 PLN Grinder SD50 3.0 kW/230 V (+ larger reducer), 56 kg – price: 8,900.00 PLN (long handle) - Universal disc 400/5 stainless steel – 480 PLN - Disc 500/5 stainless steel – 520 PLN Expansion joint groove cutter (4+2 wheels) – 4,100.00 PLN (cutter included) Expansion joint groove cutter (2+1 wheels) – 3,150 PLN (cutter included) - Diamond with 4 segments “16”, dia. 100 mm, mounted with M8 or M10 screw – 70.00 PLN - “16” Diamond, mounted with 3 x M6 screws, with 2 rectangular segments – 65 PLN - “16” Diamond, mounted with 3 x M6 screws, with 3 square segments – 70 PLN - “16” Diamond, mounted with HTC slides, with 2 diamonds – 70 PLN - Cup wheel dia. 100 mm, M14 thread, double-row or turbo – 62 PLN - Cup wheel dia. 125 mm, M14 thread, double-row or turbo – 72 PLN ALL diamonds are produced FOR US, to our specifications, by a company specializing in synthetic diamonds, which manufactures the grinding segments to our order.