U. Wolter Maschinen + Anlagen

Year of construction: 2020, operating hours: 160 h, condition: used, functionality: fully functional, empty load weight: 28,500 kg, fuel type: electric, total length: 5,850 mm, lifting height: 11,600 mm, mast type: simplex, construction height: 2,200 mm, drive type: Elektro, load capacity: 25,000 kg, construction width: 2,150 mm, Other Mast type: Standard Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Pgedpfjzf Sd Njx Ap Esn Description: Chassis with 6 wheels, non-marking front axle, drive with counter-rotating movement, 3-part proportionally extendable hydraulic boom (main boom + 2 hydraulic extensions) - boom angle +60° / -7° - mechanical operator cab, 3 removable counterweights with automatic adjustment of lifting capacity, cabin, battery 96 V - 1,125 Ah with water filling system, integrated battery charger on board, radio remote control for all crane and boom movements (2 batteries available and charged via power grid and crane), warning light, strobe, acoustic warning system for the machine in motion, fire extinguisher, LMI (Load Moment Indicator) and overload protection system according to EC directives with light warning (green/yellow/red), declarations of conformity/CE marking, radio remote control, hose reel, camera, mechanical jib 15t@1.2, also usable with winch, forks 12T@0.8m.

Year of construction: 2019, operating hours: 210 h, condition: used, functionality: fully functional, empty load weight: 20,200 kg, fuel type: electric, total length: 5,400 mm, lifting height: 13,000 mm, mast type: simplex, construction height: 2,000 mm, drive type: Elektro, load capacity: 16,000 kg, construction width: 2,070 mm, Other Mast type: Standard Podpfx Apezf Sd As Esgn Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: Hydraulically adjustable boom + 60°/-9°, Non-marking tires with tread, Charger internally installed, Battery with water filling system, Mobile head (new mobile head), Radio remote control for all crane movements, 2 cameras (front right and rear center), Distributed counterweights (removable with pallet truck), Aluminum protective boom tip 11 t, Aluminum boom extensions 7 t, Operator cabin with door, Warning light, Fire extinguisher

Year of construction: 2015, condition: ready for operation (used), A MEP saw with a Kenning automation system is available. Mitering range min./max.: -45°/60°, saw blade diameter: 350mm, saw blade bore: 32mm, thickness: 2.5mm, speed: 90rpm, max. vise opening: 190mm, max. cutting capacity: 115mm. Machine dimensions X/Y/Z: approx. 2050mm/1050mm/1150mm, weight: approx. 450kg, control system: PC. Documentation available. An on-site inspection is possible. Pjdpfx Apjzf Ncps Esgn

Year of construction: 1987, condition: ready for operation (used), Offered is a Thomas miter circular saw for metal profiles, pipes and bar stock. Saw blade diameter: 315mm, saw blade dimensions: 315/2.5/32mm, saw blade bore: 32mm, saw blade speeds: 41/82rpm, miter range left/right: 45°/45°, machine dimensions X/Y/Z: 500mm/850mm/1440mm, weight: approx. 128kg. Inspection possible by appointment. Podpfx Apszfp Hne Eogn

Year of construction: 2009, condition: ready for operation (used), overall weight: 2,500 kg, total width: 2,210 mm, total height: 2,400 mm, product length (max.): 3,110 mm, Metal Band Saw manufactured in 2009. This BAUER SA 430 ZA features a cutting capacity of 430 mm and includes a hydraulic material clamping system for efficient operation. It is equipped with a touchscreen control for preselection of cutting pressure and force, ensuring precision in cutting tasks. If you are looking to get high-quality cutting capabilities, consider the BAUER SA 430 ZA machine we have for sale. Contact us for further details. • CE Marked • Voltage: 400 V • Control Voltage: 24 V • Frequency: 50 Hz • Motor Power: 4 kW • Rated Current: 11.5 A • Fuse Protection: 13 A • Coolant Pump • Hydraulic Pump • Cutting Capacity: 430 mm • Saw Blade Dimensions: 5200 x 43 x 1.3 mm • Infinitely Variable Cutting Speed • Saw Blade Guidance: Guide Rollers and Carbide Guides • Hydraulic Material Clamping • Hydraulic Saw Frame Feed with Cutting Pressure Control • Manual Material Feed • Hydraulic Vice Feed System • Touchscreen Control for Preselection of Cutting Pressure and Cutting Force • Rapid Downfeed • Parts Collection Tray • More Than 5 Saw Blades Included • Saw Blade Type: SIGMA • Saw Blade Length: 5200 mm • Saw Blade Width: 43 mm • Saw Blade Thickness: 1.3 mm Pjdpfx Apszcwgrs Eegn • Ready for Immediate Operation • Roller Conveyor optional, not included • Chip Conveyor optional, not included

Condition: used, The MG TLG single-head up-cut saw is equipped with a Ø 350 mm blade and a rotating table for cuts at 45°, 90°, and intermediate angles. The machine offers a maximum cutting height of 125 mm. Technical Specifications Blade diameter: 350 mm Table rotation: 45° – 0° – 90° Pneumatic clamps Three-phase motor 220/380 V or single-phase 220 V Motor power: 2 HP (three-phase) / 1.5 HP (single-phase) Cutting speed: 42 m/s Built-in automatic lubrication system Maximum cutting height: 125 mm Movable support turret Dimensions Length: 800 mm Width: 700 mm Height: 1,225 mm Weight: 150 kg Pgedpfxszcfdxo Ap Esn

Year of construction: 2002, condition: ready for operation (used), Offered is an aluminum miter circular saw. Saw blade diameter: 550mm, power: 4000W, speed: 2800rpm, control: manual with digital display for cutting angle. Equipped with extraction hose, noise protection enclosure. Weight: approx. 750kg, overall dimensions X/Y/Z: approx. 1400mm/1500mm/1900mm. Inspection possible by arrangement. Podpfx Apjy Uyfpj Esgn

Year of construction: 2023, condition: ready for operation (used), Offered is a semi-automatic metal circular saw. Saw blade diameter: 350mm, vise opening max.: 170mm, control: semi-automatic. Equipped with hydraulic vise, integrated coolant system, control panel. Weight: approx. 480kg, overall dimensions X/Y/Z: approx. 1000mm/1200mm/2000mm. Inspection possible by arrangement. Pjdpfsy Uyfcex Ap Eogn

Condition: used, Single Head Cutting Saw – FOM Spring 45 A - Available with loading and unloading roller conveyors. Professional single head up-cut saw designed for high-precision cutting of aluminium profiles and light alloys. The FOM Industrie SPRING 45 A is equipped with pneumatic head tilting and hydro-pneumatic blade feed. Main features - Ø 450 mm tungsten carbide blade - Pneumatic head tilting around the horizontal axis - Cutting positions: 20° right 45° right 90° 45° left 20° left - Mechanical stops for intermediate positions with cushioned support, manually adjustable on a wide graduated scale - Hydro-pneumatic blade feed - Direct motor/blade transmission Pgodsy Ukr Topfx Ap Esn - Full cutting area guarding with automatic closing system Equipment Horizontal clamps Vertical clamps 2.2 kW blade motor Integrated safety system Robust structure for continuous professional use Applications Ideal for: window and door manufacturers aluminium processing industrial profile cutting light metal fabrication production of frames and curtain walls

Year of construction: 2011, condition: ready for operation (used), A fully automatic band saw is offered. Band length: 4240mm, saw band dimensions X/Y/Z: 4240mm/34mm/1.1mm, cutting capacity: approx. 320mm, square cutting capacity X/Y: 320mm/320mm, cutting speed: 15m/min - 100m/min. Equipped with CNC control, fully automatic material feed, hydraulic saw band tensioning, integrated coolant system, chip conveyor, bundle clamping device. Machine weight: approx. 1650kg, machine dimensions X/Y/Z: approx. 2250mm/2100mm/1500mm. Inspection possible by arrangement. Pjdpfjy Taunjx Ap Esgn

Condition: good (used), Year of construction: 1979, machine/vehicle number: 3297, functionality: fully functional, CIRCULAR SAWING MACHINE WITH MULTI-STAGE GEARBOX TYPE: 1631 MACHINE NO.: 3297 YEAR OF MANUFACTURE: 1979 Technical Data: Table size: 675 x 500 mm Minimum distance from saw mandrel to top edge of table: 60 mm Height adjustment: 50 mm Maximum saw blade diameter: 300 mm Minimum saw blade diameter: 160 mm Saw blade arbor holes: 32 mm and 40 mm Maximum table travel: 200 mm Maximum cutting height: 87 mm Maximum cutting width to the side of the saw blade: 300 mm Standard motor power: 1.5 hp Height from top edge to table: 885 mm Space requirement: 700 x 900 mm Weight: approx. 197 kg Pgjdpfxoy S Sxco Ap Eon Condition: good, functional

Year of construction: 2008, condition: ready for operation (used), A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible. Pgjdpfey Nm Umjx Ap Ejn

Year of construction: 2014, condition: ready for operation (used), overall weight: 1,060 kg, cutting speed: 77,000 mm/min, Metal Band Saw manufactured in 2014. This Macc 381 AV features fully automatic operation, a hydraulic clamping vice, and a coolant system. It has a cutting capacity for round material up to 280 mm and square material up to 290 x 290 mm. The machine includes a chip conveyor and a numerical control system for enhanced efficiency. If you are looking to get high-quality cutting capabilities, consider the Macc 381 AV machine we have for sale. Contact us for further details. • Power supply: 3-phase • Main motor power: 0.9 / 1.6 kW • Main motor speed: 700 / 1420 rpm • Hydraulic oil pump motor power: 0.37 kW • Coolant pump power: 0.09 kW • Wheel diameter: 350 mm • Saw blade size: 3010 x 27 x 0.9 mm • Cutting thickness (kerf): 1.2 mm • Cutting angle: 0° • Max vice opening: 320 mm • Vice jaw height: 150 mm • Working table height: 850 mm • Coolant tank capacity: 50 litres • Cutting capacity: • Round: 280 mm • Square: 290 x 290 mm • Rectangular: 290 x 320 mm • Features: • Fully automatic operation • Hydraulic clamping vice • Hydraulic bow movement • Coolant system • Numerical control system MACC4 • Blade tensioning system • Blade cleaning brush Psdpfx Apoy Dtu As Eogn Additional equipment • Chip conveyor (auger type)

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Year: 2021 - technically efficient, ready to work – after full service - disc diameter: 600 mm - cut from below - cooling installation Pjdpsy A Htpefx Ap Eegn - vertical pneumatic clamps - work area lighting - compressed air preparation station

Condition: good (used), Year of construction: 2017, machine/vehicle number: AGUA1710068, Offer 26101 Motorized tube sawing machine – tube beveling machine Technical data: - Cutting range: 29 - 119 mm - Wall thickness up to: 5 mm - 6 cutting speeds: 95 - 230 rpm - Central tube clamping via handwheel - Manual rotary drive / cutting drive - Height-adjustable saw unit Pjdpjy A Hk Uefx Ap Esgn - Drive: 220 V / 1200 W - Space requirement: appr. W 900 x H 1000 x D 400 mm - Weight: appr. 300 kg - 2 roller conveyors: 1500 mm

Condition: used, Year of construction: 2020, machine/vehicle number: AHJA2005118, Offer 26102 Technical data: - Cutting range: 140 - 330 mm - Wall thicknesses up to: 5 mm - 6 cutting speeds: 95 - 230 rpm - Central tube clamping via handwheel - Manual rotation drive / cutting drive - Height-adjustable saw unit - Drive: 220 V / 1200 Watts - Required space (W x H x D): approx. 900 x 1000 x 400 mm Pgjdjy A Eyujpfx Ap Ejn - Weight: approx. 400 kg - 2 x roller conveyors, each 1500 mm

Condition: used, Fully automatic RATTUNDE line ACS100/2 integrating: · cutting, · brush deburring, · facing / chamfering, · 100% length control, · automatic robotic packing with double output system · and very large set of tooling. Designed for high-precision single or double cuts. One of the fastest tube cutting machine on the market. TECHNICAL DATA Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25* - 2.000 mm (*25 - 150 mm with special tooling) Performance: Up to 1.500 pieces/hour SCOPE OF SUPPLY 1. BM 8 bundle loading magazine in light construction 2. ACS 100/2 Cutting production system with piece counter 3. Brush deburring machine BDM Podpfx Apsyz Rvxs Esgn 4. Chamfering machine CFM 5. Length measuring device Pi 6. Automatic stacking robot SRT 7. Safety fence with light barrier to secure the BM bundle loading magazine 8. Step conveyor SCB for the transport of pieces 9. Conveyor for test tubes 10. Complete set of tooling 11. Switch cabinet & control system for the complete line Performance: Up to 1.500 pieces/hour Cutting diameters: 10 - 100 mm Entry length: 12.000 mm Cutting length: 25 - 2.000 mm (25 - 150 mm with special tooling) Thickness: From 0,5 mm to solid

Year of construction: 2011, condition: ready for operation (used), Miter range: 90°/30°, saw band inclination: 2°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: 3350mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 2000mm/1650mm/1850mm, weight: approx. 650kg. An on-site inspection is possible. Pedpfxoyttvwo Ap Eogn

Year of construction: 2022, condition: new, functionality: fully functional, Completely new machine, packed. Did not suit our room since it is not installable two ways. Bought from KATOMSK AS Pjdpjyrb Swjfx Ap Eegn

Condition: ready for operation (used), A fully automatic hydraulic horizontal band saw Amada in scissor design is available. Round cutting capacity: 254mm, rectangular cutting capacity: 254mm/279mm, saw band dimensions X/Y/Z: 3505mm/27mm/0.9mm, speed: 80m/min, feed: 390mm/stroke, max. cutting length: 3500mm, max. table load: 1000kg. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/1500mm, weight: approx. 1250kg. An on-site inspection is possible. Psdpfxoym Dggj Ap Eegn

Year of construction: 2009, condition: used, machine/vehicle number: 0301-260004, Kaltenbach KBS 1010 DG - KDX-S 1015 PROFILSTAHL SÄGE-BOHRMASCHINE The Kaltenbach KBS 1010 DG - KDX-S 1015 saw-drill line combination consists of a CNC-controlled Kaltenbach KBS 1010 DG band saw and a Kaltenbach KDX-S 1015 drill line. This drilling saw line is ideally suited for economical sawing, drilling, center punching, marking (scribing) and thread cutting of profiles and flat steel bars in steel construction and the steel trade. The Kaltenbach KDX-S drilling machine is equipped with 3 drilling units, each with 26 kW drive power and 5 tool changers. The Kaltenbach M150 length measuring device (measuring carriage) together with the T13 transport system is designed for profile lengths of up to 18 m. The comprehensive transport system for the material transport of sectional steel also has cross tractors at the infeed and outfeed for the cross transport of the sections. The CNC control together with the Kaltenbach Profiline III software enables data processing in DSTV and DXF format. The entire system has an ergonomic working height of 640 mm from the material level to the top edge of the floor, giving the operator a good overview. A gripper downstream of the saw is used to remove and eject the first cut or transport the profile to the outfeed area. The Kaltenbach KBS 1010 DG - KDX-S 1015 saw drill line combination consists of: Kaltenbach KDX-S 1015 PROFILE DRILLING SYSTEM CUTTING BAND SAW MACHINE Kaltenbach KBS 1010 DG MACHINE CONTROL Kaltenbach Profiline III LENGTH MEASURING DEVICE Kaltenbach M 150 Pedeymy Imjpfx Ap Ejgn TRANSPORT SYSTEM Kaltenbach T13

Condition: used, Behringer HBP 650/800 Line is fitted with full automatic and unloading tables. Band dimensions: 10.000 x 67 x 1,6 mm Single cut: - Round: 800 mm - Rectangular: 800 x 780 mm - Flat: 1000 x 750 mm Minimal: - Round: 50 mm - Rectangular: 50 x 20 mm Band dimension: 10.000 x 67 x 1,6 mm Single cut : Round: 800 mm Single cut : Rectangular: 800 x 780 mm Single cut : Flat: 1.000 x 750 mm Podpfsyma Igjx Ap Esgn Minimal : Round: 50 mm Minimal : Rectangular: 50 x 20 mm

Condition: used, Multihead cutting machine TRA2000/7/7, made by MAIR Including: 1) Loading table 2) Cutting machine with 7 cutting heads 3) Operator control panel Pgsdpeymaypofx Ap Esn 4) Unloading bin Optional to be build new upon requirement : 5) Double output craddle 6) New electrical control panel with frequency converters for cutting motors 7) Sound and safety protection cover Max. tube length: 7.500 mm Max. loading capacity: 2.000 kg Round tubes (outer ø): 12 – 50 mm Square tubes (hxw): 12×12 – 40×40 mm Rectangular tubes (hxw): 12×16 – 50×30 mm Max. thickness: 2,5 mm Length of tubes to be cut: 330 – 7.400 mm Number of cutting heads: 7

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1 SCOPE OF SUPPLY 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Single collecting cradle RA1, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine & photelectric barriers & emergency line. Note: Safety barriers were installed by owner to have the machine under “safety conformity” TECHNICAL SPECIFICATIONS Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Spain Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Pgodpfoymax Eex Ap Esn Total installed power: Aprox. 21kW – 50Amp

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Pgsdpfx Aeymaw Ujp Eon Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm