Gmt

Condition: used, Machine type: Tube pointing hammer machine (cold pointing) Kdjdpfx Ajxydwqsg Isw Tooling: 4 hammer jaws, hydraulically or pneumatically driven, acting simultaneously on the tube end. Application: Preparation of steel, stainless steel, or non-ferrous tubes for cold drawing.

Year of construction: 2008, condition: ready for operation (used), Control Unit Kdsdpoxx D Aksfx Ag Isw Brand SIEMENS Model SIMATIC HMI Main Drive Number of axis 3 Additional Equipment Includes tube and mandrel rod support. Bending mandrel is hydraulically extendable with a programmable pre-release. Bending mandrel has automatic minimal quantity lubrication. Oil cooler equipped. This 3-axis TRACTO-TECHNIK Tubotron 30 CNC was manufactured in 2008. It features a programmable sequence control, Simatic Panel PC 677 for menu navigation, and manual or automatic operation modes. The machine includes a free-standing bending head, hydraulic pipe clamping, and a hydraulic long-neck chuck for precise positioning. Ideal for high-quality bending operations. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Year of construction: 1996, condition: ready for operation (used), A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible. Kdedpfx Agexxzize Iow

Year of construction: 1986, condition: ready for operation (used), A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible. Kedpfxjxxzius Ag Iodw

Year of construction: 2007, condition: ready for operation (used), Punching force: 165kN, max. sheet thickness: 6mm, max. sheet weight: 150kg, max. punching diameter: 76mm, strokes punching/marking: 600/1300 strokes/min, simultaneous speed: 100m/min, working dimensions X/Y: 2000mm/1250mm, tool stations: 15. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/2200mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible. Kedpfxjxxzhws Ag Isdw

Year of construction: 2010, condition: ready for operation (used), For sale is a bending machine. Working length: 2500mm, maximum sheet thickness (at 400N/mm²): 3.0mm, weight: 3500kg. A viewing can be arranged by appointment. Kjdpfx Ajxxl Nrog Isdw

Year of construction: 2002, condition: ready for operation (used), Media Power consumption 4 to 10 kW Kdjdpfx Agsxxdrrj Iow This TWIN SEAM KA 2000-3000 roll bending machine was manufactured in 2002. It handles coils up to 2000 mm wide and 7 tons in weight, producing channels from 140 x 140 mm to 2500 x 2500 mm. Efficient with a power consumption of only 4-10 kW, it offers high capacity production up to 10 tons per 8 hours. Contact us for more information about this machine. Application Types Bending

Year of construction: 1994, condition: ready for operation (used), A hydraulic plate shear BBM is available. Working width: 4000mm, max. material thickness: 4mm. An on site inspection is possible. Kdjdpfx Aoxxa Tfsg Ijw

Year of construction: 1989, condition: ready for operation (used), An old folding machine Schröder is available. Working width: 2500mm, max. material thickness: 2.5mm, upper beam stroke: 80mm, adjustment: 160mm, speed: 120°/s, working height: 850mm, weight: approx. 3500kg. A visit on site is possible. Kdjdpfx Asxxa U Njg Iow

Year of construction: 2018, condition: ready for operation (used), A hydraulic long folding machine/swivel bending machine Sperr & Lechner is available. Working width: 8000mm, max. sheet thickness steel/aluminium/stainless steel: 3mm/4mm/2mm, max. bending angle: 145°, throat depth: 1130mm, opening width: 180mm, back gauge: 1000mm. Machine dimensions X/Y/Z: approx. 10000mm/2100mm/2100mm, weight: approx. 7500kg. Documentation available. An inspection on site is possible. Kdedsxxa Tlspfx Ag Isw

Year of construction: 2013, condition: ready for operation (used), General Data Kdodpfx Agjxwzx Tj Isw Machine weight 6500 kg Main Drive Punching force 300 Kn This Euromac MTX Flex 6 Hybrid was manufactured in 2013. It features a maximum punching force of 300 kN and can handle sheet weights up to 200 kg. Equipped with a hydraulic system controlled by a servomotor, it ensures precision and efficiency. The machine supports automatic repositioning up to 10000 mm and has a maximum punching diameter of 85 mm. Ideal for high-quality punching capabilities. Contact us for more information about this machine. Application Types Punching

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, machine/vehicle number: 00034269-ERH, control type: NC control, actuation type: manual, working width: 2,100 mm, stroke rate (min.): 28 1/min, table height: 800 mm, back gauge: 1,000 mm, oil tank capacity: 150 l, overall weight: 4,250 kg, total length: 3,010 mm, total width: 2,410 mm, total height: 1,650 mm, number of support arms: 2, Equipment: documentation/manual, emergency stop, foot remote control, type plate available, Standard Equipment: - Upper and lower blades also suitable for stainless steel processing - Hydraulic blade gap adjustment - Upper blade with two cutting edges, special steel hardened - Lower blade with four cutting edges, special steel hardened - Blade gap adjustment device - NC-controlled backgauge with ball screw spindle - Cutting line illumination - Automatic hold-down system - CE safety features - Support arm with ruler and side stops - Support table with ball rollers - HGS-A control console - CybTouch 6 control with color touchscreen - Mobile operator pedestal with foot switch and emergency stop button - Operating manual / CE documentation TECHNICAL DATA: Cutting length: 2100 mm Cutting capacity (42 kg/mm²): 6 mm Cutting capacity (70 kg/mm²): 4 mm Blade gap min. / max.: 0.05 - 0.8 mm Strokes per minute: 28 Kedexwvptepfx Ag Ijdw Hold-downs: 11 units Hold-down pressure: 9 t Main drive motor power: 11 kW Backgauge motor power: 0.75 kW Backgauge adjustment range: 1000 mm Adjustment speed: 110 mm/s Cutting angle: 1.2° Table length: 2415 mm Support arms: 2 units Width without support arms: 2410 mm Transport width: 2100 mm Table height: 800 mm Oil tank capacity: 150 l Length: 3010 mm Width: 2410 mm Height: 1640 mm Weight: 4250 kg

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 4500 Kg This MACRI PROVAR 6-45 U-D was manufactured in 2022. It features a maximum steel bending capacity of Ø 45x4 mm and stainless steel up to Ø 40x3 mm. With a bending angle of up to 190° and speeds reaching 450 mm/sec on the X axis, this roll bending machine ensures precision and efficiency. Consider the opportunity to buy this MACRI PROVAR 6-45 U-D roll bending machine. Contact us for more information about this machine. Application Types Kdsdpoxwqv Ujfx Ag Iow Bending

Condition: ready for operation (used), Year of construction: 2000, operating hours: 39,700 h, Control Unit Brand DELEM Model DA 65 Additional Equipment CNC electro-hydraulic press brake / CNC Control Model: DELEM CNC control model DA 65 / Swivel control panel, front left / 2D graphic programming & product display / Tool & program library / CNC Controlled Axes: Y1 + Y2 / X / R / Z1 + Z2 / I axis / CNC Controlled Backgauge (X axis) / CNC-Controlled Height Adjustment of the Backgauge (R axis) / CNC-Controlled Adjustment of the Fence Fingers (Z axis) / CNC-Controlled, Pneumatic Die Adjustment (I axis) / WILA Manual Table Crowning, incl. Analog Value Display / TRUMPF Hydraulic Upper Tool Clamping / TRUMPF Manual Lower Die Clamping / 1x Free-Moving 2-Hand / Foot Control / Rear Safety Device (Sliding Door) This 4-axis TRUMPF TrumaBend V130 press brake was manufactured in 2000. It features a CNC electro-hydraulic system with DELEM CNC control, offering precise bending with a pressure of 130 tons and a folding length of 3060 mm. The machine includes multiple CNC-controlled axes for enhanced flexibility and accuracy in operation. Consider the opportunity to buy this TRUMPF TrumaBend V130 press brake. Contact us for more information about this machine. Application Types Bending Kdedpfxexwfldj Ag Isw

Year of construction: 2004, condition: used, controller manufacturer: SIEMENS, pipe diameter (max.): 90 mm, wall thickness: 8 mm, CONTROLS .. SIEMENS FEEDSTOCK TUBE .. external diameter min.: 10 mm .. external diameter max.: 90 mm .. wall thickness min.: 0.8 mm .. wall thickness max.: 8 mm .. length min.: 150 mm .. lenght max.: 3000 mm ntegrated pipe sawing line – standard version Ksdpfxsxvn Sdo Ag Isdw The integrated pipe sawing line is a fully automatic system for the precise machining of pipes and profiles. System components BM bundle loading magazine and separation unit Sawing module Safety equipment (protective fences, light grids, etc.) The bundle loading magazine is designed for pipe lengths of up to 9 m. The system enables damage-free separation and positioning of the pipes. Main technical data Feature Value Total length approx. 13,000 mm Width approx. 3,600 mm Height approx. 2,350 mm Floor load approx. 1,500 kg/m² Temperature range 15 °C – 40 °C Relative humidity max. 90 % Connection values Electrical: Control system: Siemens 840 D Installed power: approx. 125 kW Main fuse: 200 A Supply cable: 3 × 95 mm², 1 × 50 mm² PEN Pneumatic: Compressed air: approx. 3.5 m³/min, 6–10 bar (dry, filtered) Tube processing parameters Parameter Value Max. coil weight 5,000 kg Outer diameter 10–90 mm Wall thickness 0.8–8 mm Tube shape Round and profile tubes Tube length (starting material) 3,000–9,000 mm Cutting lengths 150–3,000 mm Materials Steel, stainless steel, Docol 800 DpAg, 26MnB5, 34MnB5 Saw blade width max. 3 mm Internal and external diameter inspection: Test mandrels with pressure force measurement (1–100 N) Repeat accuracy: ± 0.1 mm Performance data Machining speed depending on diameter, length and material Maximum workpiece weight per section: 25 kg Machining accuracy: ± 0.05 mm + sawing tolerance / max. ± 0.10 mm total Max. weight when stacking: 45 kg Positioning accuracy when stacking: 0.5 mm Corrosion protection All machine and safety equipment is coated with a high-quality primer. Machine colour: RAL 5010 Forster blue Safety devices: RAL 1003 signal yellow Carbide-compatible sawing technology

Condition: ready for operation (used), Year of construction: 2000, operating hours: 99,800 h, General Data Measurements height 2200 mm Kodpfxjxu Rwgs Ag Isdw Control Unit Model TRUMPF CNC TRUMAGRAPH CC220S Main Drive Punching force 220 kN Number of axis 2 Media Main electronic connection 17 kVA / 50 Hz This TRUMPF Trumatic 500 was manufactured in 2000. A robust CNC punch press, it offers reliable performance for your punching needs. Consider the opportunity to buy this TRUMPF Trumatic 500 CNC punch press. Contact us for more information about this machine. Application Types Punching

Year of construction: 2005, operating hours: 60,000 h, condition: ready for operation (used), Main Drive Number of axis 4 Additional Equipment Hydraulic clamping Kedpfx Aexu Rxqog Isdw Easy Form angle measuring system No tools required This 4-axis LVD PPEB 220/40 press brake was manufactured in 2005. It features hydraulic clamping and the Easy Form angle measuring system for enhanced precision. Ideal for those looking to enhance their metal forming capabilities. Contact us for more information about this machine. Application Types Bending

Year of construction: 2023, condition: ready for operation (used), Additional Equipment Laser with 8kw and chiller Open Cabin with right and left side accessible doors Safety glasses on the doors NIGHT Cut for safer cutting and piercing process SMART Cut for faster processing of thin material MAX Cut for piercing process time reduction for thick material Gas Mixer Cut Nozzle check and OPC by camera Adaptive cut ATC automatic tip changer with 20 nozzle stations This Prima Power Laser Genius + 1530 was manufactured in 2023. It features an 8kw laser with chiller, open cabins on both sides, safety glasses on doors, and a high-capacity dust collector. It includes advanced cutting technologies like NIGHT Cut, SMART Cut, and MAX Cut, plus an ATC automatic tip changer with 20 nozzle stations. Consider the opportunity to buy this Prima Power Laser Genius + 1530 fiber laser cutting machine. Contact us for more information. Kdjdsxu Rx Rspfx Ag Isw Application Types Cutting

Condition: good (used), Year of manufacture: 2000 Machine number: 080520 Control: Sinumerik 840D Combined working area: 2,585 x 1,280 mm Laser operation: 2,585 x 1,280 mm Punching operation: 2,585 x 1,370 mm Punching force: 220 kN Sheet thickness: 8 mm Speed x-axis: 90 m/min y-axis: 60 m/min simultaneous: 108 m/min Strokes per minute: 600 Linear magazine tools: 19 Max. punching diameter: 76.2 mm Laser: 90 to 1,800 W Applications: punching, slotting, shearing, bead forming, hemming, laser cutting Accessories: 4 complete cabinets - see separate email Condition: good, ready for operation Kjdpfxexu Hlgs Ag Isdw Connection: 70 kW Weight: 16 t Dimensions: 7,000 x 7,400 mm

Year of construction: 2019, condition: ready for operation (used), General Data Measurements width 7360 Measurements depth 6750 mm Measurements height 2310 mm Machine weight 12960 kg Control Unit Brand SIEMENS Model Sinnumeric 840 Movement Kdodpfjxuw H Usx Ag Isw X-Axis Movement 2500 + R mm X-Axis Rapid Traverse 100 m/min Y-Axis Movement 1250 mm Y-Axis Rapid Traverse 75 m/min Max Material Thickness Steel 6 mm Stainless steel 3 mm This Durma TPL93 turret punch press was manufactured in 2019. It's a robust choice for precision punching operations. Consider the opportunity to buy this Durma TPL93 turret punch press. Contact us for more information. Application Types Punching

Condition: ready for operation (used), controller manufacturer: Fanuc 16P, empty load weight: 10,000 kg, total length: 4,425 mm, total width: 2,800 mm, total height: 1,950 mm, Turret revolver with 16 + 3 x Auto Index Holders Punching pressure: 20 Ton Max sheet thickness by punching + nibbling: 6,4 mm Max punching dia: 88.9 mm Working range on cross-side (X-axes): 1270 / 2540 mm Working range along (Y-axes): 1000 mm Toolchanger: Yes Kodpfx Agjxuwyns Ijdw Number of toolpositioners: 19 positions Power needed: 25 kva

Year of construction: 2013, operating hours: 23,265 h, condition: ready for operation (used), Main Drive Laser power 5 kW Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm This TRUMPF Trulaser 5030 Fiber was manufactured in 2013. It features a closed frame, torque drive, linear direct drive, and a TruDisk 3001 solid-state laser. Equipped with an automatic pallet changer, 17-inch touch screen, and integrated camera for process monitoring. Ideal for precise fiber laser cutting. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 machine we have for sale. Contact us for more information about this machine. Kdsdpfx Aoxuld Ueg Ijw Application Types Cutting

Year of construction: 2008, condition: ready for operation (used), Main Drive Number of axis 2 This Salvagnini S4X was manufactured in 2008. A robust CNC punching machine, it operates on 400V with a nominal power of 33kW and a current of 58A. Ideal for high precision and efficiency in sheet metal processing. If you are looking to get high quality punching capabilities consider the Salvagnini S4X machine we have for sale. Contact us for more information. Kdjdpfxjxulgis Ag Iow Application Types Punching

Year of construction: 2015, operating hours: 13,792 h, condition: ready for operation (used), General Data Machine weight 8000 kg Control Unit Kdodpfx Agjxulgve Ijw Brand MAZATROL Model Preview 3 Main Drive Laser power 4.0 kW Workpiece Workpiece weight 900 kg Table Outer length 3000 mm Outer width 1500 mm Table load 900 kg This Fiber Laser Cutting Machine was manufactured in 2015. It features a 4.0 kW IPG Fiber Laser and MAZATROL PREVIEW 3 CNC Control, optimized for precision in cutting mild steel up to 9.0 mm and stainless steel up to 16.0 mm. The machine supports a table size of 3000 mm x 1500 mm and a max workpiece weight of approximately 900 kg. If you are looking to get high-quality cutting capabilities, consider the Mazak OPTIPLEX 3015 FIBER II machine we have for sale. Contact us for more information. Application Types Cutting

Condition: good (used), Year of construction: 2012, Worktable: 3,000 x 1,500 mm Table height: 700 mm Load capacity: Max. 600 N/m² Ksdpfx Agsxugqve Iodw Material thickness: 0.5 – 6 mm Speed: Max. 36 m/min Control unit: Flat display, keyboard and mouse Power supply: 3x 400V, 50Hz + 1x 220V, 50Hz (approx. 10 kW) Pneumatics: 6.0 – 8.5 bar (approx. 300 l/min) Dimensions: 4,100 x 2,200 x 1,700 mm Weight: 1,400 kg The extraction unit is not included in the price. However, upon request, we can provide a suitable extraction system for the machine.