Lejumi un buve

Condition: used, Continuous Casting Machine Hsdpsxixkwofx Afpofn

Condition: used, Year of construction: 2000, Glass melting equipment for making glass insulation for lamp heads. Hfjdpfjxbyz Ujx Afpsn

Condition: used, Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, Capacity: 2000 kg (Fe) Hsdpfx Ajw Nh E Eefpjfn Electrical power: 205 kW

Condition: used, functionality: fully functional, Specifications: - (54) 22'' x 8'' x 3'' - 7.5 kg capacity moulds on transfer chain - Propane burner Hfsdpfx Aswtzpyofpen - CSA approved

Condition: new, Diameter 620mm Height 700mm Wall thickness 40mm Hodpjwmmq Njfx Afpefn Suitable for aluminum, among other materials

Condition: like new (used), Year of construction: 2019, functionality: fully functional, A used Rautomead RMT 200 is for sale. Inspection on site is possible. Hsdpfx Afsv Rz Ekepofn More technical details are available upon request.

Condition: used, functionality: fully functional, Metal Foundry Inventory Complete Sand Foundry Inventory Molding Plant HWS-HSP-2D / Built 2000+ 2004 Sand Preparation Approx. 40 t/h / Webac Mixer / Eirich Centrifuge / DATEC Water Dosing / Core Making Hsdpfovz Aprex Afpsfn Filter System Venti Oelde Tearing Machine / Electric Melting Shop / Heat Treatment / Thermal Analysis Ideco, Stricko Furnace Wöhr Continuous Mixer Bleach Shop The metal foundry is located in central northwestern Germany. The nearest airports are Magdeburg, Kassel, and Hanover. You are cordially invited to visit the operating foundry. Equipment and items are sold in used condition. The seller disclaims all warranties. Added with images

Condition: good (used), Year of construction: 1960, functionality: fully functional, AOD converter The argon oxygen decarburization (AOD) process is used to make stainless steel and specialty grades of steel, including tool steels, silicon steels, low-alloy steels, and low-carbon steels. - Output 8,0 t - AOD Konverter furnace reserve vessel + lifting balance - Argon - Oxygen - Nitrogen Hfedpfxsvamv Ho Afpsn - Compressed air Karhula Foundry has two molding lines and hand molding for large castings. Our melting capacity consists of 8 ton arc furnace and 8 ton, 1,5 ton and 0,5 ton induction furnaces. We have an 8 ton AOD (Argon Oxygen Decarburization) converter for metal treatment.

Condition: good (used), Year of construction: 1960, functionality: fully functional, type of input current: AC, Melting furnace, 1960 - KF Arc Furnace_AC EAF 8 ton, 4 MW Hsdovampgjpfx Afpefn - Nominal capacity 8,0 t, output during production has been 6,0 - 10,0 t - Power transformer 4 MW Karhula Foundry has two molding lines and hand molding for large castings. Our melting capacity consists of 8 ton arc furnace and 8 ton, 1,5 ton and 0,5 ton induction furnaces. We have an 8 ton AOD (Argon Oxygen Decarburization) converter for metal treatment.

Condition: good (used), Year of construction: 2013, operating hours: 100 h, functionality: fully functional, Centrifugal casting furnace, casting of nickel-based alloy or Gamma-Ti possible, melting capacity max. 10kg, for turbines and blade production, joints Please contact us for further information and documentation. Hjdpfx Asvalryefpofn

Condition: good (used), Year of construction: 2012, functionality: fully functional, - Year of manufacture / commissioning: 2012 - Technical documentation is available. - The machine can be operated from the control panel or via a remote control. - The machine's operating system is Windows 7. - Control unit Hjdeuxt I Depfx Afpefn - Sand mixer - Sand station with New sand, Reclaimed sand, - Chemical station whit ALPHASET TPA 180 and INDUSTOL ABS - If desired, the machine operator can be requested to explain the machine's operation - I.M.F. T36/50-SB 2012 1 continuous mixer Europe double-articulated style, upright, capacity 50 t/h, radius 6,5 + 2 m, height adjustable - The price includes the entire I.M.F. T36/50-SB sand mixing system - Offers are accepted

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. Hfedpfx Asuxmt Tofpjn All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: used, Machine type: Horizontal table-type boring machine Manufacturer: CORNAO Hfodpfjui H U Nex Afpon Model: BS65N S1893 Year of manufacture: 1983 Condition: Used Motor power: 6.5 kW Voltage: 400 V Required air pressure: 5 bar Weight: 1,900 kg Control system: A.I.F

Condition: new, Year of construction: 2019, For aluminum only Hfodpfx Ajtqm Irjfpsn Operating temperature: 680-800°C Max. Load: 400kg Brand new!

Condition: good (used), Year of construction: 1973, functionality: fully functional, machine/vehicle number: SN: 73.729, total height: 315 mm, total width: 130 mm, total length: 600 mm, tank capacity: 1,600 l, overall weight: 18,000 kg, Equipment: documentation/manual, DISAMATIC 2013 A SN: 73.729 Date of manufacture: ca 1973 Dimensions: 5995 x 1300 x 3150mm (lenght x width x height) Weight: ca 18t (without hydraulic oil) Mould dimensions: Height: 480mm Width: 600mm Thickness: min. 120mm / max. 330mm The thickness of moulds depends on chamber depth, pressure moulding, moulding boards, pressure of sand shooting, moulding sand properties. Pressure on mold surface: To be set up between 0 and 20kp/cm² Efficiency: 240 molds per hour (coreless/thickness of mold 200mm) Max. unit weight of casting: ca 20kg net Moulding sand consumption: max. 48m³ per hour Air consumption: max. 13m³ per min. Air pressure: min. 6kp/cm² max. 10kp/cm² Electric power system: Power demand - ca 41kW SYSTEM AMC type 2053 + SBC Dimensions: Height: the height of capping strips AMC is equal with the height of bottom side of bottom plate 1725 x 600 x 8mm *hardchromed 1 side Width: 1130mm Hjdpfortpmaox Afpofn Lenght: 12m Weight: ca 6t Air consumption: Average consumption: 0.5m³/min Max. consumption: 2.5m³/min SBC (SYNCHRONIZED BELT CONVEYOR) Lenght: 6m Total lenght (AMC + SBC): 18m ----- Lack of CSE - "QUICK CORE MASK CHANGE" Lack of QPC - "QUICK PATTERN PLATE CHANGING UNIT" ----- Moulding machine DISAMATIC 2013 A is integrated with pouring furnace BBC XCQ 27 with capacity 2,7t net. This inductive furnace is equipped with heated inductor with max. power 120kW and bottom-pour stopper. Moulding line is connected with knockout grid. We're ready to sell whole molding line, including extra facilities (separate payable). Disamatic 2013 A is in good shape, mechanically and electrically efficient. Price concerns only machine DISAMATIC 2013 + AMC/SBC conveyor; disassembly, cost of transportation, assembly at client's place - pays Buyer

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, total height: 4,200 mm, overall weight: 7,500 kg, type of input current: three-phase, clearance between the columns: 950 mm, pressure: 186 bar, input voltage: 400 V, power: 7.5 kW (10.20 HP), input frequency: 50 Hz, clamping force: 500 kN, control voltage: 24 V, Equipment: documentation/manual, Description: Hfodorn Sv Uspfx Afpen - Siemens S7 control, - Energy efficient gearbox - Rexroth axial piston pump - Central ejector - Parker control valves ​

Year of construction: 2019, condition: excellent (used), load capacity : max 360 kg Extendable : 700 mm x 1400 mm Hfodpfxopu D Dzo Afpjn Angle of rotation around longitudinal pivot : 360`

Condition: good (used), Year of construction: 1987, in 2008 was rebuilt Melting capacity: 1,300 kW Input power: 1,600kVA Capacity: 1 X 2,000kg Control: Siemens S7 Hedpfx Aslu Dvdjfpjfn Weight: approx. 20 tons

Condition: good (used), Year of construction: 1996, capacity 2 X 150 kg melting caoacity: 100kW control system Analog Hfodelu Dkljpfx Afpen weight f. transport: cca. 5 Tonnen Accessories: incl. cooling tower and pump

Condition: as good as new (ex-display), Year of construction: 2019, Four pieces UHP graphite electrodes 405x1800 mm, 442 kg each, with nipples T4, for electro arc melting furnaces. Hedpfx Aei Dn H Isfpofn

Year of construction: 1989, condition: good (used), Diameter 900 mm Hedeirndqjpfx Afpefn There are 2 pieces

Condition: good (used), Year of construction: 2002, It was completely refurbished in 2011. Hfsdpfeirnb Dox Afpon Ther is + 1 set filter bag.

Condition: good (used), Year of construction: 2000, 3 x 400V, 50Hz 200 kW Hsdsikvd Uepfx Afpofn Dimensions: 1000x1000x2000 mm Weight: 1200kg

Year of construction: 1995, condition: excellent (used), SPECIAL STEEMAKING SHOP EQUIPMENT   Vacuum Induction Melting Furnace P1000 ALD, 8 tons capacity Electro Slag Remelting, type ESFR F350/1, capacity 1,3 tons electrode AJAX, Induction Melting Furnace 6.3 ton capacity with two crucible AJAX Vibration Scrap Charging for AJAX Induction Melting Furnace Spectrometre ARL 3460 KRAUTKREMER, Ultrasonic Testing Equipment Electrical Transformer 1600 KVA 20/0.4 KV Metalographic Microscop Metalographic specimen cutting and polishing Hfedpfsif Uluox Afpen Diesel Generator Water treatment plant Cutting saw Please contact us for more technical details and photos. Thank you!

Year of construction: 2003, condition: good (used), machine/vehicle number: 956-03-13, OFFER 21072 Hodpfx Aogxmabsfpofn Technical data: - Load capacity positioning table approx. 750 kg - face plate diameter 500 mm - max. workpiece diameter 1600 mm - height of turntable in horizontal position approx. 750 mm - rotary table with clockwise + anticlockwise rotation - axis of rotation turntable endless 360 ° - Turning time per revolution 12,5 sec. - Swivelling left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot switch for turntable + swivel arm - hydr. clamping bolt for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping travel of the clamping bolt 32 mm - Clamping force pushing / pulling 80 / 48,9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manual or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - weight approx. 2500 kg - Separate control cabinet with high frequency device for - high frequency tools