Used Doosan Compressor for sale (312)

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, Doosan 77.55 compressor – 3000 rpm – 8.6 bar – 35.5 kW – weight 750 kg – 687 operating hours – with new hoses and hammers = More information = Year of manufacture: 2022 Intended use: Construction Pjdpjxq Ak Djfx Agqsrd Contact Miguel Cubas for more information. = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 509 h, Doosan 77.55 Compressor – 3000 rpm – 8.6 bar – 35.5 kW – Weight 750 kg – 509 operating hours = Additional Information = Year of manufacture: 2022 Intended use: Construction Contact Miguel Cubas for further information. Pjdpsxcyd Eofx Agqerd = Company Details = We are located between Antwerp and Brussels along the A12 motorway, close to the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), Year of construction: 2019, Doosan Puma TT2100SYY Mfd. 2019 Tooled as pictured Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 Prsdpfxow Dvnxj Agqjd TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING 2 machines available

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available Pjdpfx Agevzln Reqord

Condition: used, Year of construction: 2013, Doosan Puma 480 Turning Centre with Fanuc Series 32i - Model A CNC Control, 600mm Diameter Powered 3 Jaw Chuck, 10 Position Tool Turret, Tailstock, LNS Swarf Conveyor, Filtermist FX6002 Oil Mist Filter Extractor, Machine Weight 10100kg. S/No. ML0144-000404 (2013) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes Psdpfxexztl He Agqerd Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2014, functionality: fully functional, turning length: 3,200 mm, turning diameter: 900 mm, spindle speed (max.): 1,500 rpm, travel distance X-axis: 470 mm, travel distance Z-axis: 3,235 mm, spindle motor power: 45 W, total height: 2,780 mm, total length: 7,360 mm, quill travel distance: 150 mm, quill diameter: 160 mm, swing diameter over cross slide: 800 mm, overall weight: 21,800 kg, swing diameter over bed slide: 1,030 mm, bar passage: 164 mm, spindle nose: A1-15, Doosan Puma 700L Large Capacity Lathe Built 2014 Prjdpfswqf Uujx Agqod Accessories include Swarf Conveyor, Tailstock with Mt #6 Taper, SMW Hydraulic Steady, 800mm 3 Jaw Chuck, FANUC 32i Control.

Year of construction: 2014, condition: ready for operation (used), General Data Machine weight 15500 kg Main Drive Number of axis 7 Spindle Speed 4000 RPM Spindle motor power 22 kW Control Unit Brand FANUC Model Series 31i-MODEL B5 Movement X-Axis Movement 630 mm Pedpfx Agexzlqzsqjrd Z-Axis Movement 1585 mm Y-Axis Movement 115 mm This 7-axis DOOSAN Puma MX2600ST was manufactured in 2014, featuring a robust horizontal turning machine design. It includes a B-axis of +/-120 degrees, extensive X, Y, Z travels, and a bar capacity of 76mm. The machine is equipped with a FANUC 31i-Model B5 control, a 40 station tool changer, and a 22kW spindle motor. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma MX2600ST machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2020, operating hours: 7,800 h, CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 21289   Specifications: Psdpexdhxaefx Agqsrd • 2020 model• 7800 hours• S70 quick coupler• Width: 349 cm• KW: 202• Weight: 29,400 kg• Rototilt R8• Grapple• Previously on a gold service contract. Now on a standard service contract• Makin 3D GPS• Includes a 1600-liter grading bucket (bucket in picture not included)• Good undercarriage (see pictures)• Includes spike guard• High and wide undercarriage• Large light package• App-controlled Webasto heater• One operator• Central lubrication on both machine and tilt• Extra hydraulics• 360 camera Description: 2020 Doosan 300LC-7 for sale on behalf of customer.The machine appears to be in very good condition and well maintained. Sold with a lot of extra equipment such as R8 Rototilt, grapple, Makin 3D GPS, high and wide undercarriage, large light package, and app-controlled Webasto heater.Ready to go straight to work for the new owner. Hours: 7800 Own weight: 29400 Total Weight: 29400 Width: 349 Kw: 202 CE: Yes Engine hours: 7608 Model: DX-300LC7 - HDHW - GPS -

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: ML0107-000373, Doosan PUMA 2600 L Swing 780mm X-Axis 260 mm Z-Axis 1350 mm Podpfxexw Ilms Agqjrd FANUC i Series Swarf conveyour Renishaw Toolsetter

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Psdpfexzq Ufsx Agqsrd

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 660mm, Swing over bed 660mm, maximum turning length 1,540mm, Traverses X Y Z 630mm, 300mm (+/-150mm), 1585mm, B axis 240degrees (+/- 120), C axis 0.001 degrees, main spindle speed 3,000rpm, milling speed 12,000rpm, bar capacity 102mm, 40 station ATC, Capto C6 taper, spindle power 26/18.5 kw, Predpfeq T Rt Dsx Agqjd Fanuc 31iB control, probe, swarf conveyor, hydraulic steady, coolant

Condition: used, Year of construction: 2008, operating hours: 7,690 h, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21905 Specifications: Model year: 2008 Hours: approx. 7,690 71 kW 14,800 kg Undercarriage (see photos) Gjerstad S60 quick coupler Engcon rotor tilt Digging bucket Grading bucket Prjdpfx Agexzyhheqjd Track width: approx. 60 cm Machine width: approx. 260 cm Blade Central lubrication Extra work lights Radio/CD Air conditioning Description:Doosan DX140LC tracked excavator with approx. 7,690 hours.Comes with Engcon tilt, digging bucket, and grading bucket.One track has been replaced and the other will be replaced before sale.Can be delivered at short notice. Hours: 7690 Own weight: 14800 Width: 260 Kw: 71 Model: DX140LC Beltegraver m/ Engcon tilt og 2 skuffer. Nye belter.

Condition: good (used), Year of construction: 2012, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, 10 station turret 45kW spindle motor, FANUC control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, Prjdpfx Aswnfzcsgqod

Condition: excellent (used), Year of construction: 2022, Swing over bed 600mm, swing over carriage 400mm, 65mm bar capacity , machining diameter 350mm, Psdpfx Agewq Inqsqjrd machining length 330mm, 12 position turret, Fanuc series I control, Spindle 4500 rpm, swarf conveyor, parts catcher, tool setter, tailstock

Condition: good (used), Year of construction: 2013, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 12 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, Pedpfx Agexv Svmjqord 3 jaw chucks, swarf conveyor, tool setter, magazine barfeed unit.

Condition: good (used), Year of construction: 2008, Table size 1600 x 750 mm, table load 1500 kgs, Predpfxjxwytco Agqed Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 24m/min, Spindle power 18.5 Kw, spindle speed 6,000rpm, 40 station ATC, spindle taper BT50, through spindle coolant, swarf conveyor, Fanuc 21i control.

Condition: good (used), Year of construction: 2009, 750mm Swing, 540mm max. machining diameter, Prjdjw Npz Iepfx Agqjd 1020mm max turning length, 5000rpm main spindle, 5000rpm Sub spindle, 65mm bar capacity, 12 station lower turret, 12000rpm milling 18.5kW, 22kW spindle motors, FANUC 3iTB control, 3 Jaw Power Chucks, tool setter, Swarf Conveyor, Coolant

Condition: good (used), Year of construction: 2007, 770mm Swing, 550mm max. machining diameter, 1100mm Distance between Centres, 2000rpm spindle, 116mm bar capacity, 10 station turret 26kW spindle motor, FANUC 21iTB control, Pedpfx Aoxv Tf Negqsrd 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, tool setter.

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pallet size 500 x 500mm, pallet load 500 kgs, 60 ATC, BT40 spindle taper, Prjdewq Iwxspfx Agqod Fanuc 31i- control. Spindle power 22Kw, B axis 0.001 Degrees, 14000 rpm spindle, swarf conveyor, Through Spindle Coolant.

Condition: good (used), Year of construction: 2014, 900mm Swing, 650mm max. machining diameter, 992 mm maximum turning length, 1000rpm spindle, Pedpfxowwtrbe Agqjrd Spindle bore 275mm, 10 station turret 45kW spindle motor, FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant,

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm Predpfoxm Sxvsx Agqod W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 540 x 535mm, Table 1200 x 540mm, Spindle speed 8000 rpm, Spindle taper BT50, Spindle Motor 20kW, FANUC I series Control, 24 Station ATC, Prodpfx Agexv Udgeqsd through spindle coolant, swarf conveyor, Low Volt light.

Condition: good (used), Year of construction: 2016, Traverses X Y Z; 1300 x 670 x 625mm, Prsdpfx Aexwytvjgqod Table size 1500 x 670mm, maximum table load 1300 kgs. min-max height spindle to table 150-775mm, spindle speed 12,000rpm, spindle taper BT40, 30 station ATC spindle power 18.5 Kw, Fanuc i series control, Through spindle coolant,4th axis Table

Condition: excellent (used), Year of construction: 2014, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, Predpfx Ajw I Tniegqed 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, 12 station lower turret, milling speed 4,000rpm, 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant

Condition: good (used), Year of construction: 2010, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, FANUC i Control, spindle motor power 15kW, 30 station ATC with side arm, Prjdpfsxzt Hwjx Agqod Through Spindle Coolant, Low Volt Light, Swarf conveyor, with 4th axis.