Paoletti Energy Srl

Condition: used, functionality: fully functional, Maximum planing width: 230 mm Maximum planing height: 120 mm Number of spindles: 6 Maximum spindle speed: 6,000 rpm Hfsdpjzdk Dfofx Ac Nsh Feed table length approx. 2,000 mm Spindle diameter: 40 mm Motorized adjustment of planing width and height Maximum feed rate: 24 m/min Emergency stop Dimensions approx. (LxWxH): 4,100 x 1,500 x 1,600 mm Weight approx.: 2,800 kg

Condition: excellent (used), Catalogue number 7988 TECHNICAL DATA - spindle width: 510mm - 4-knife planing shaft - max thickness of workpiece in thicknesser: 200mm - max thickness of workpiece on side heads, 3-sided: 100mm From above: - pawls - toothed infeed pulling roller - planing shaft - pressure beam - smooth outfeed pulling roller From below: - 2 adjustable rollers in lower table - guide rail From rear: - 2 side spindles + pressure beams - spindle height: 100mm - max spindle spacing: 510mm - spindle diameter: 30mm - manual left/right spindle adjustment - motor approx. 2x3kW - main motor: 7.5kW - exhaust port: 2x120mm - overall dimensions (L/W/H): 1700x1200x1000mm - weight: 1060kg ADVANTAGES Hfsdpfx Aezc Nk Noc Noh – made in Poland – 4-knife shaft – DTR documentation – very good condition – used planer Net price: 12,900 PLN Net price: 3,070 EUR at 4.2 EUR rate (Prices may change with larger fluctuations)

Condition: used, Year of construction: 2004, Speed 60 m/min Capacity 260/150 mm Tool holder diameter 50 mm Composition: Lower spindle sander 15kW Planer straight 11 kW Gauche planer 11 kW Hodpfxozc Nb Is Ac Nsfh Top planer 15 kW Planer straight 11 kW Gluing left? Wait: 'Raboteuse gauche 11 kW' in French means 'Left planer 11 kW'. Planer for top finishing 15kW Planer bottom finishing 11kw Drive power 11 kW 8 workstations Digital positioning Chrome table Counterplayers Lubrication 400 V

Condition: good (used), Year of construction: 2003, functionality: fully functional, 1.High-Speed Planer/Moulder WACO MAXI 8 spindles for horizontal splitting, feed speed 20-150 m/min Working width planing: 30-300 mm Working height planing: 10-150 mm Cutting circle- 180-260 mm Operating voltage: - 400 Volts, 50 Cycles Main feed motor - 37 kW Frequency concerter - 45 kW 1.Bottom head - 24,5 kW 2.Top head - 30 kW 3.Right side head - 18,5 kW 4.Left side head - 30 kW Hsdszc I Dbjpfx Ac Nofh 5.Right side head -18,5 kW 6.Left side head - 24,5 kW Horizontal splitting: 7.Right side head - 53 kW 8.Left side head - 53 kW Max working width 200 mm Max working height 63 mm Max saw blade diameter 300 - 400 mm Spindle diameter 50 mm Vertical adjustability 10 mm Spindle speed 5.500 v/min Exhaust connection 2 x Æ 160 mm Unit lenght 1300 mm 2. High-Speed Planer/Moulder WACO MAXI 3 spindles for finishing, feed speed 30-300 m/min Main feed motor - 37 kW Frequency converter - 45 kW Feed speed, variable: 30-300 m/min 1.Beading head: 24,5 kW 2.Top head 24,5 kW 3.Rotaplan head 30 kW

Condition: used, Year of construction: 2003, functionality: fully functional, Ledinek Hfedjzc H T Uepfx Ac Noh High speed double side calibrate planer 150 m/min Rotoles 300 2V-KS 150 214 KW

Condition: like new (used), WEINIG SPARE PARTS FOR HYDROMAT POWERMAT UNIMAT USED AND NEW PARTS SPINDLES GEARBOXES CASTINGS MOTORS VARIATORS BED PLATES OUTBOARD BEARINGS JOINTERS PCS LOGOCOM ETC BRIVE BELTS POSITION INDICATORS PRESSURE SHOES CHIP BREAKERS HOODS PENDULUMS SHORT BOARD FEEDING PARTS Hedpfx Acozc H Iro Nofh TOOLING ETC

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, Four-sided planer/moulder – FUTURA KRONO S 220×160 year of manufacture 1994 machine does not comply with CE standards bed length 2000 mm working width from 25 to 220 mm working height (increased) from 8 to 160 mm no. 4 spindles, 40 mm diameter (complete with cutters) spindle rotation speed 6000 rpm lower spindle motor power 4 kW (5.5 hp) right spindle motor power 4 kW (5.5 hp) left spindle motor power 5.5 kW (7.5 hp) upper spindle motor power 5.5 kW (7.5 hp) cardan drive with variable speed motor – feed speed variable from 6 to 28 m/min electric roller lift operating manual + electrical diagram operation verified (video available upon request via WhatsApp) transport dimensions 3400x1700x1800h mm Hfodpfjzc E Anjx Ac Neh weight 1500 kg

Condition: excellent (used), functionality: fully functional, 5-spindles automatic planer with grooved table WEINIG PROFIMAT P 23 E with grooved plane ( removable ) second hand machine n.5 spindles working condition : Excellent CE mark : Yes volt. 380/50 grooved plane ( removable ) with tools : Yes , as in photos Composed by 5 spindles , 4 motors : 1° spindle : planer . motor power Hp 5,5 ( Kw 4 ) 2° and 3° spindles : right and left vertical . motor power Hp 10 ( Kw 7,5 ) 4° spindle : thickness planer . motor power Hp 7,5 ( Kw 5,5 ) 5° spindle : planer . motor power Hp 5,5 ( Kw 4 ) grooved plane ( removable ) Technical details : forward motor power Hp 4 ( Kw 3 ) spindle rotation speed rpm 6000 feed speed : from 5 to 24 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2000 lubrication system Hfjdpfx Acozcx A Is Neh electric height adjustment set of service keys / documentation

Condition: excellent (used), Year of construction: 2009, LEADERMAC SPEEDMAC 923SP SPINDLES: 9 X 50MM X 6000 RPM BOTTOM (11 KW) - OUTBOARD BEARING RIGHT (11 KW) - LEFT (11 KW) - RIGHT (11 KW) - PROFILE JOINTER LEFT (11 KW) - PROFILE JOINTER TOP (15 KW) - OUTBOARD BEARING BOTTOM (22 KW), TOP (15 KW) - OUTBOARD BEARING + STRAIGHT JOINTER BOTTOM (15 KW) - OUTBOARD BEARING + STRAIGHT JOINTER WORKING WIDTH: 230 MM, HEIGHT: 160 MM. MAX FEED SPEED 60M/MIN (POSSIBLE TO INCREASE IF NEEDED) Hedpezcu R Iefx Ac Nsfh STRAIGHT JOINTERS. PROFILE JOINTERS. CNC POSITIONING ON SPINDLES 3, 5, 6, 8 CONNECTION: 380 V / / 50 HZ 400 AMPS. FULL DOCUMENTATION INCLUDED.

Condition: excellent (used), Catalogue No. 6747 TECHNICAL DATA - Maximum planing width: 170 mm - Maximum planing height: 130 mm 7 spindles: 1) Bottom horizontal spindle: 170 mm, 4 kW 2) Right vertical spindle: 130 mm, 5.5 kW 3) Left vertical spindle: 130 mm, 5.5 kW 4) Additional right vertical spindle: 130 mm, 5.5 kW 5) Top horizontal spindle: 170 mm, 4 kW - 5th spindle with electric height adjustment 6) Additional bottom horizontal spindle: 170 mm, 5.5 kW 7) Universal spindle: 170 mm, adjustable up to 180°, 7.5 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable vertically and horizontally - Top: 6 powered feed rollers (toothed), including 2 double rollers - Top: 4 outfeed rubber rollers - Pneumatically pressed rollers - Side pressure roller included - 2 guide rails in the table - Electrically adjustable planing thickness: 0.37 kW - Infeed table length: 2,480 mm - Stepless feed speed adjustment - Feed motor: 2.2 kW - Extraction port diameters: 1 x 135 mm, 5 x 120 mm - Dimensions (LxWxH): 5,550 x 1,900 x 1,660 mm - Weight: approx. 3,500 kg FEATURES – Made in Germany – Equipped with 7 cutterheads – Universal spindle – Used planer, in very good condition Hfodjzcu Rzjpfx Ac Noh Net price: 27,900 PLN Net price: 6,640 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: good (used), Leadermac Speedmac 923 Maximum width 230mm Maximum thickness 160mm 9x spindles 6,000 RPM 4x side heads !!! Bottom 11kW Right 7.5kW Left 11kW Top 15kW outboard bearing Right 11kW Left 11kW Top 15kW outboard bearing Bottom 15 kW outboard bearing Bottom 30 kW outboard bearing Hfodpfxezcu Els Ac Noh Possible to add jointers as needed. CNC position on spindles 3,4,6 and 7. 105 pcs of Hydro tooling included!!! 11kW feed motor. 6-70m/min (possible to increase if needed). Automatic lubrication system. Total 137.5kW Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: AA2/001942, working width: 230 mm, working height: 120 mm, Equipment: CE marking, SECOND-HAND 6 SPINDLES MOULDER SCM MOD. SUPERSET NTPL - CE RULES 1. horizontal bottom 11 kw 2. vertical right 7.5 kw Hfedpfxozcn A Ro Ac Neh 3. vertical left 7.5 kw 4. horizontal top 11 kw 5. horizontal top 7.5 kw 6. horizontal bottom 7.5 kw - Label AA2/001942 - Year 2012

Condition: excellent (used), CATALOGUE NUMBER 6946 TECHNICAL DATA - Max. working width: 210mm Hodpfozcdz Aex Ac Nofh - Max. working thickness: 120mm - Number of spindles: 2 pcs - Spindle diameter: 50mm From above: - 3 infeed feed rollers, rubber, smooth, including 2 double rollers - 2 outfeed feed rollers, rubber, including 1 double roller - Cutterheads on supports - Cutterhead up/down adjustment - Electric adjustment of top cutterhead height - Electric setting of planing thickness - Spindles equipped with brake - Main motor: 2×5.5kW - Stepless feed speed adjustment - Feed motor: 3kW - Feed via Kardana shafts - Extraction nozzle diameter: 2x160mm - Dimensions (L/W/H): 2350x1780x1950mm - Weight: 1882kg – Made in Germany – Jointers for sharpening knives on the cutterhead – 2 Hydro cutterheads included – Not repainted – Very good condition, used planer Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 6950 TECHNICAL DATA - Max. working width: 220 mm - Max. working height: 130 mm – 4 spindles: 1) Bottom horizontal 220 mm, 5.5 kW 2) Right vertical 130 mm 3) Left vertical 130 mm; (2nd and 3rd spindle) 5.5 kW 4) Top horizontal 220 mm, 5.5 kW - 4 spindles with electric up/down adjustment - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm - 4 powered, toothed feed rollers from above, including 1 double roller - 1 double rubber outfeed roller from above - Bottom rubber outfeed roller - Feed on Kardan shafts Hfedozcc Axspfx Ac Nsh - Infinitely variable feed speed: 6–22 m/min - Feed motor: 2.2 kW - Lifting motor: 0.55 kW - Electric thickness adjustment - Infeed table length: 1970 mm - Central lubrication - Extraction port diameter: 3x120 mm, 140 mm - Fully enclosed cabin - Dimensions (LxWxH): 3350 x 1400 x 1400 mm, weight: 1700 kg – German production – Not repainted – Used planer in very good condition Net price: 33,900 PLN Net price: 8,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7706 TECHNICAL DATA Hodpfszccz Isx Ac Njfh - Maximum workpiece width: 220 mm - Maximum workpiece height: 120 mm – 5 spindles: 1) Bottom horizontal: 220 mm, 4 kW 2) Right vertical: 120 mm 3) Left vertical: 120 mm (spindles 2 and 3: 7.5 kW) 4) Top horizontal: 220 mm, 5.5 kW 5) Bottom horizontal: 220 mm, 4 kW - All spindles are adjustable up/down, right/left - Spindle diameter: 40 mm - Pneumatic pressure rollers - 4 top infeed geared rollers, including 1 twin - 1 top outfeed smooth rubber roller - 1 bottom outfeed rubber roller - Feed driven by Cardan shafts - Stepless feed speed adjustment: 6–36 m/min - Feed motor: 2.2 kW - Lifting motor: 0.25 kW - Equipped with brake - Electric planing thickness adjustment - Central table lubrication - Infeed table length: 1970 mm - Extraction port diameter: 4 x 120 mm, 140 mm - Dimensions (L x W x H): 3450 x 1600 x 1450 mm - Weight: 1112 kg Net price: 39,900 PLN Net price: 9,500 EUR (based on exchange rate of 4.2 EUR) (Prices may change subject to significant fluctuations)

Condition: excellent (used), Catalogue number: 7894 TECHNICAL DATA - Min / max working width: 20 / 165 mm - Min / max working height: 8 / 100 mm 4 spindles: 1) Lower horizontal, 165 mm, 4 kW 2) Right vertical, 100 mm, 4 kW 3) Left vertical, 100 mm, 4 kW 4) Upper horizontal, 165 mm, 5.5 kW - All heads adjustable up/down, left/right - Spindle diameter: 40 mm From above: - 6 driven, toothed infeed rollers (including 3 double rollers) - 2 driven outfeed rollers, smooth rubber From below: - Side pressure before and after the lower feed roller in the table - Lower infeed toothed, driven, swiveling roller in the table before the first spindle - 2 side pressure units - Driven outfeed roller, metal, smooth - All rollers pneumatically pressed - Length of infeed table: 1770 mm - Table height adjustment up/down - Central lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment - Feed motor: 3 kW - Feed via cardan shafts Hodpfezccqcjx Ac Nsfh - Enclosed in cabin - Extraction connection diameter: 4 x 130 mm - Dimensions (LxWxH): 3200 x 1700 x 1850 mm - Weight: 2800 kg ADVANTAGES – 4-head configuration – Ideal for wet and dry timber – Infeed toothed, driven, swiveling roller in the lower table before the first spindle – Original DTR technical documentation + CE – Used machine, excellent condition Net price: 49,900 PLN Net price: 11,880 EUR (depending on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7219 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm Number of spindles: 4: 1) Bottom horizontal: 200 mm, 5.5 kW 2) Right vertical: 150 mm, 4 kW 3) Left vertical: 150 mm, 4 kW 4) Top horizontal: 200 mm, 5.5 kW - All heads adjustable up/down, right/left - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 driven infeed, serrated rollers (including 2 double rollers) - 1 driven outfeed, rubber-coated, double roller From below: - Driven, serrated infeed roller, swiveling on lower table - 3 lateral pressure units - Driven, smooth metal outfeed roller - All rollers pneumatically pressed - Infeed table length: 2,130 mm - Table height adjustable - Centralized lubrication - Electric thickness adjustment - Lifting motor: 1.1 kW - Infinitely variable feed speed - Feed motor: 3 kW - Feed via Cardan shafts - Fully enclosed in soundproof cabin - Extraction connection diameters: 4 x 130 mm - Dimensions (LxWxH): 3,650 x 1,750 x 1,800 mm - Weight: approx. 3,000 kg ADVANTAGES – 4-head configuration – Ideal for both wet and dry wood – Full technical documentation (DTR) – Used machine, in very good condition Hodpfx Aszccn Ioc Nofh Net price: 68,900 PLN Net price: 16,400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7221 TECHNICAL SPECIFICATIONS - min / max working width: 45 / 150 mm - min / max working height: 15 / 50 mm 3 spindles: 1) lower horizontal 11 kW 2) upper horizontal 22 kW (7000 rpm) 3) lower horizontal 5.5 kW spindle diameter: 40 mm - spindles 1 and 3 adjustable manually up/down, left/right - spindle 2 adjustable manually left/right - spindle 2 adjustable electrically up/down - spindles 2 and 3 equipped with brakes Top section: - 3 infeed, driven, metal toothed rollers - 1 outfeed, double, driven, rubber roller Bottom section: - infeed pressure device - grooved table - driven, smooth metal roller - electric thickness adjustment - variable feed speed: 6-24 m/min - feed motor: 3 kW - feed via Cardan shafts - infeed table length: 1970 mm - automatic table lubrication system - extraction port diameter: 1x150 mm, 2x140 mm - dimensions (LxWxH): 3070x2000x1800 mm - weight: 2000 kg ADVANTAGES – Made in Germany – With 3 heads – For processing lamellas – Grooved table – Complete set of cutter heads included – Unpainted – Very good condition – Used planer Net price: 125,900 PLN Net price: 29,980 EUR Hfsdpfx Aezccb Uec Nsh Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), Year of construction: 2018, Weinig Powermat 700 Type: Powermat 700 Year of manufacture: 2018 Number of spindles: 6 Planing width: 230 mm Planing height: 160 mm Spindle diameter: 40 mm Infeed table length: 2,500 mm Feed rate: 0 - 40 m/min Rollers in the table: 1 piece 200 mm and 1 piece 50 mm Control system: Memory plus Hsdpszcb Efjfx Ac Nsfh Spindle arrangement: Bottom: 11 kW Right: 7.5 kW Left: 7.5 kW Top: 15 kW Top: 15 kW Bottom: 11 kW

Condition: used, Number of boring spindles 7 St. Working width 160 mm Working height 120 mm Length of the planing table 2.000 mm Hfedpfx Acjzb Rffj Nsh Feed motor 2,2 kW Weinig PFA 17 N (Unimat) automatic planing and chamfering machine for four-sided planing and profiling of wood, equipped with a universal spindle. Spindle 1: Bottom / 35 mm / 4 kW Spindle 2: Right / 35 mm / 3 kW Spindle 3: Left / 35 mm / 5.5 kW Spindle 4: Right / 35 mm / 7.5 kW Spindle 5: Top / 35 mm / 5.5 kW Spindle 6: Bottom / 35 mm / 4 kW Spindle 7: Universal / 35 mm / 4 kW

Condition: excellent (used), Year of construction: 2015, WEINIG HYDROMAT 2000 FEED MOTOR 5.5 KW FEEDRATE MAX 36 M/MIN SPECIAL WIDE FEEDING SYSTEM WITH AIR BED 1ST SPINDLE BOTTOM 11 KW, COUNTER BEARING 2ND SPINDLE RIGHT 7.5 KW 3RD SPINDLE LEFT 7.5 KW 4TH SPINDLE BOTTOM 7.5 KW, COUNTER BEARING 5TH SPINDLE TOP 15 KW, COUNTER BEARING WORKING WIDTH 250 MM PLANING HEIGHT 160 MM Hjdpfx Aozb Ifvec Nefh NUMBER OF SPINDLES 5 BOTTOM SPINDLES 2 RIGHT SPINDLES 1 SPINDLES LEFT 1 SPINDLES TOP 1 SPINDLE CONFIGURATION B-R-L-B-T SPINDLE ROTATION SPEED MAX 1/MIN 7.200 RPM SPINDLE DIAMETER 40 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 5,5 KW MAIN MOTOR POWER 15 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT PIECE PACKAGE REDUCED ROLLER GAP PNEUMATIC TOP PRESSURE FIRST INFEED ROLLER CONTROLLED TYPE OF FEED ROLLER DRIVE CARDANIC MANUAL CENTRAL LUBRICATION CONTROL WEINIG POWERCOM PLUS CONFORMITY MARKING CE MARK TOTAL CONNECTION 55 KW

Condition: good (used), Code: 0401 Brand: SCM Model: COMPACT 23 - CE Standard Automatic 5-spindle moulding machine for joinery, profiles, frames, wooden doors and windows, furniture, timber joinery, sawmills and various – CE Standard Heavy-duty base Technical specifications: Max working width 230 mm Min working width 23 mm Max working height 125 mm Min working height 6 mm Feed speed 6/12 mt/min Shaft rotation speed 6000 rpm Shaft diameter 40 mm Useful length of vertical shafts 140 mm Useful length of horizontal shafts 253 mm Axial adjustment of vertical shafts 0/25 mm Axial adjustment of upper horizontal spindle 0/25 mm Axial adjustment of planer spindle 0/15 mm Min/max diameter of profiling tools on vertical spindles mm 100/180 Min/max diameter of profiling tools on upper horizontal spindle mm 100/180 Min/max diameter of profiling tools on lower horizontal spindle mm 120/140 Planer spindle motor power 5,5 Hp Vertical spindle motor power 7,5 Hp Upper horizontal spindle motor power 5,5 Hp Lower horizontal spindle motor power 5,5 Hp Safety enclosure N° 4 suction inlets diameter 120 mm Flush cutter diameter 165 mm N° 4 light alloy cutter heads Feed rollers diameter 120 mm Infeed table length 2500 mm Quick adjustment of table and feed guide 10 mm Manually operated table lubrication pump Pneumatic feed rollers pressure Motorised feed unit before surface planer Feed unit Tandem front right vertical Set-Up: Simple and quick set-up system Configuration: 1° Spindle surface planer 2° Spindle right vertical spindle moulder Hfodpfszb Hqqex Ac Noh 3° Spindle left vertical spindle moulder 4° Spindle thickness planer 5° Spindle Universal : Effective spindle length 230 mm - Spindle speed 6000 rpm - Min/max tool diameter 100/180 mm - Motor 7,5 Hp - Suction inlet diameter 120 mm Overall dimensions mm 4800 x 1600 x 1500 h Weight 2200 kg

Condition: excellent (used), working width: 240 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 240 mm, working height: 160 mm, total width: 240 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 7,000 rpm, Weinig Unimat 1000 with grooved table Working width: 240 mm, working height: 160 mm, Hfjdpfx Ajzbz Ukec Noh 5 spindles Spindle diameter: 50 mm Spindle arrangement: 1-Bottom (7.5 kW) 7000 RPM 2-Right (7.5 kW) 7000 RPM 3-Left (7.5 kW) 7000 RPM 4-Top (7.5 kW) 7000 RPM 5-Bottom (5.5 kW) 7000 RPM Feed rate: 4 kW / 6-36 m/min, one driven roller in the table at the outlet.

Condition: excellent (used), functionality: unexamined, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 160 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, Weinig Profimat 23 E, working width: 260 mm, working height: 170 mm, 5 spindles, spindle diameter: 40 mm, spindle arrangement: 1 - Bottom - 5.5 kW 2 - Right + 3 - Left - 11 kW 4 - Top - 5.5 kW 5 - Bottom - 11 kW Feed rate: 6 - 24 m/min - 4 kW air cushion in the table Hfsdpfx Acszbz S Ne Njh One driven roller in the table at the outlet. Includes tooling.

Condition: excellent (used), Year of construction: 1994, Automatic 5-spindle profiling machine for the production of frames, furniture components, windows, doors, moldings, broom handles, wooden toys, and various other articles. Features: - Heavy-duty machine stand made of solid cast iron - Cardan drive without chains: precise, robust, and durable - Specially shaped feed roller teeth reduce the penetration depth into the wood - Compact feed system - Pneumatic pressure on the feed rollers Technical data: - Minimum/maximum working width: 20/230 mm - Maximum working height: 120 mm - Feed speed, stepless: 5–24 m/min - Spindle diameter: 40 mm - Spindle speed: 6000 rpm - Feed roller diameter: 140 mm - Length of pre-planing table: 2000 mm - Sound-insulated and fully enclosed - Motorized adjustment of the vertical feed - Pressure of the side roller against the first right spindle - Motorized adjustment of the upper spindle - Automatic table lubrication Hedpszblc Eofx Ac Nefh Equipment: 1. Spindle: Undercutter – min./max. diameter 125–145 mm – Motor 5.5 HP 2. Spindle: Right vertical milling spindle – min./max./max. diameter 100-200/180 mm – Axial adjustment 3. Spindle: Left vertical milling spindle – min./max./max. diameter 100-200/180 mm – Axial adjustment – Motor power for two vertical spindles 7.5 HP 4. Spindle: Top cutter – min./max. diameter 100/200 mm – Motor 5.5 HP – Axial adjustment 5. Spindle: Undercutter – min./max. diameter 100/200 mm – Motor 5.5 HP – Axial adjustment - 5 cutter heads included - Dust extraction port (5 pieces): 140 mm - Compressed air: 6–8 bar - Dimensions (LxWxH): 3400 x 1600 x 1600 mm - Weight: 3000 kg