Stolberger Maschinenfabrik GmbH

Condition: used, Length: 12,000 mm. Blsdpfx Amjzilxbobji

Condition: used, machine/vehicle number: 22011 SLS, Year of construction: 2023, Laser Data Marking Laser Manufacturer: Keyence Model: MD-X2520A Laser type: YVO₄ laser Laser class: 4 Wavelength: 1063 nm Output power: 25 W Laser Position Detection Bjdpfxezilv Hs Ambjli Laser type: Semiconductor laser Laser class: 3R Wavelength: 683 nm Output power: 5.0 mW Guide Laser / Distance Indicator Laser type: Semiconductor laser Laser class: 2 Wavelength: 655 nm Output power: 1.0 mW Electrical Data Nominal voltage: 400 VAC Frequency: 50 Hz Control voltage: 24 VDC Nominal current: 23 A Power: 15 kW Back-up fuse: 50 A Diversity factor: 0.9 Power supply: 3 × 400 V + PE

Condition: not inspected (used), Data Tabletop dimensions: approx. 730 x 730 mm Bljdpfezilrhsx Ambji Suitable for the Fanuc M900iB/280L robot Overall dimensions: approx. 940 x 810 x 660 mm

Condition: not inspected (used), Industrial enclosure Previously used as a measuring room Completely enclosed industrial enclosure Dimensions Roller shutter door approx. 3500 × 2960 × 2960 mm Complete enclosure approx. 22,000 × 15,000 × 9,000 mm Lifting equipment ABUS overhead crane Load capacity: 1 ton Ventilation and air conditioning system 2 outdoor units from Mitsubishi Electric Mitsubishi Unit 1 Type: PUZ-M125VKA2 Year of manufacture: 2022 Bodpszilmxjfx Amboli Mitsubishi Unit 2 Type: PUZ-M125VKA2 Year of manufacture: 2022

Year of construction: 2024, condition: not inspected (used), machine/vehicle number: 266136, Technical specifications Model FP 211 Air technology Free air volume flow: max. 2000 m³/h Blodpozilk Defx Amboi Effective air volume flow: 300–1500 m³/h Max. static pressure: 5500 Pa Dimensions and weight Weight: approx. 240 kg Dimensions of the standard filter configuration (H × W × D): 1900 × 700 × 777 mm Dimensions with 1 expansion module (H × W × D): 2145 × 700 × 777 mm Dimensions with 2 expansion modules (H × W × D): 2380 × 700 × 777 mm

Year of construction: 2024, condition: not inspected (used), machine/vehicle number: 11089, Machine data Generator type FG5005S Technical data Input voltage: 3~/360–510 V/PE/50–60 Hz Rated current (operating current): 12 A Fuse rating: 32 A Total power: 5 kVA Power control: electronic Output frequency: 19–23 kHz Short-circuit current withstand capability according to CE: Icw = 0.64 kA E-file no. according to UL 508: E468235 Short-circuit withstand capability according to UL: SCCR = 5.0 kA Options Setpoint can also be switched via the customer interface Customer interface Input connection for a 2-channel emergency stop device 2-channel limit switch or safety switch for external emergency stop Generator ON/OFF Electronic release functions Error acknowledgment Status messages (generator on; plasma ready) Error and warning messages when configured limit values are reached Communication interface (optional) Profibus Profinet EtherCAT Ethernet Environmental conditions Permissible ambient temperature: 0 °C to 40 °C Connectable plasma nozzles (example) max. 4 pieces RD2005 RD1010 max. 8 pieces PFW10 Blodpfx Aozilimembei PFW20 RD1004 RD2004 Technical data Control cabinet Dimensions Standard: W 559 × H 1602 × D 567 mm With rollers: W 559 × H 1602 × D 567 mm With base transformer: W 559 × H 1750 × D 567 mm Weight Standard: approx. 147 kg With rollers: approx. 148 kg

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 3734, Equipment: CE marking, DANTHERM Filtration dust extraction and welding fume extraction system. This vacuum extraction system is ideal for welding processes, plasma cutting, laser cutting, sandblasting, shot peening, plastic processing, and the removal of all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. The set includes a complete set of automation equipment, an electrical distribution panel, connecting elements, and a silencer. Additionally, we can provide individual workstation extraction units. Fan power: 15 kW – smooth, frequency inverter-controlled operation. Capacity: up to 9500 m3/h. Bsdpfx Ajzh T S Tsmbjli Vacuum: up to 4000 Pa.

Condition: used, Tepla Tepla 400 SC 230 Volt, 13A, 50/60Hz Pressure: 4-6 bar Scope of delivery: (See images) We are happy to answer any further questions you may have over the phone. Bjdpfjzh Drqex Amboli Written orders can be placed via email or fax.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 Bsdpfxszhub As Ambeli - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Year of construction: 2018, operating hours: 60 h, condition: used, functionality: fully functional, machine/vehicle number: IP406, Equipment: CE marking, Furmanite IPSCO Hot tapping machine IP406 Bedpfx Aozg Uzmombsli TAPPING RANGE : 4-16 inch Great drive Travel length : 66 inch Designed for #600

Year of construction: 2014, condition: new, DC-Sputtering Power Supply ADL HX 300/1000 Year of construction: 2014 (New, never used) Power: 30 kW (see photo for more technical details) Bljdpfezg Iffsx Amboi

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, cutting angle (max.): 30 °, machine/vehicle number: M3378, For sale: large band saw for soft materials. Outreach: 1.25 m, allowing you to cut through material up to 2.5 m wide. Blsdpfjzfwfxex Ambsi Cutting height: approx. 90 cm. Cutting length: approx. 2.3 m. The upper part can be tilted electrically to the left and right up to 30 degrees, making this a special sawing machine. Well-maintained machine with few operating hours. Fecken Kirfel – German quality. Installation and adjustment can be arranged upon request.

Condition: used, Year of construction: 2024, operating hours: 4 h, functionality: fully functional, machine/vehicle number: B24AA452D3, LixelKity K1 with RTK Module – Demo Unit, Like New Condition For sale is a LixelKity K1 mobile mapping scanner, including an RTK module, offered as a demo unit in very good, like-new condition. The LixelKity K1 is a modern, high-precision 3D scanning system for the quick and efficient capture of buildings, construction sites, infrastructure projects, and terrain data. By combining LiDAR technology, high-resolution cameras, and RTK support, the system enables precise and georeferenced data acquisition in real time. Features: LixelKity K1 3D LiDAR scanner RTK module for centimeter-accurate positioning Integrated cameras for colored point clouds Mobile mapping system for indoor and outdoor use Compact and user-friendly design Original accessories included Application areas: Bsdpozfgimefx Amboli Surveying and geodesy Construction and BIM projects As-built documentation Architecture and monument preservation Infrastructure and asset management Digital twins and 3D modeling Condition: Demo unit Technically flawless Optically in very good condition Ready for immediate use Inspection and demonstration are possible by appointment. We will gladly send further information, technical data, and images upon request.

Year of construction: 2018, condition: like new (used), functionality: fully functional, machine/vehicle number: M.66999.999.92, Take advantage of this unique opportunity to acquire an immediately available, like-new machine from the world-renowned premium manufacturer FRIMO. This is a fully assembled and 100% operational special machine for thermoforming/vacuum lamination, which, due to a cancelled project, never went into series production and is therefore in like-new condition. Machines of this type are often found in the premium automotive sector worldwide. One of the special features of this machine is its large forming area of up to 1,200 x 2,200 mm and its very flexible range of applications, due to its modular design and many special functions. Detailed description: Versatile ECO single-station laboratory machine or ECO single-station in-line machine for series production. Depending on the application, whether as a laboratory machine or for series production in in-line operation, and depending on the type of frame (fixed or adjustable frame), the maximum available forming area is defined. Forming areas: (with currently available frames) In-line operation: 810 x 2,205 mm (min. 465 x 490 mm) Single-station operation: 970 x 1,970 mm (min. forming area, linear: 465 x 490) With newly manufactured frame: Single-station frame, fixed: 1,200 x 2,200 mm & single-station frame, adjustable: 1,130 x 2,200 mm Linear frame, fixed: 1,200 x 2,200 mm & linear frame, adjustable: 900 x 2,200 mm Maximum lower tool or molded part height: 470 mm Maximum tool package height for installation with upper tool: 800 mm (821 mm) Maximum upper tool height: 650 mm Number of upper platens (molds and dies): 2 Machine equipment: - Movable heater - Chain rail for automatic film feed - Clamping frame or series frame can be used Different heaters available for interchangeable use, depending on requirements: Bljdpfxozd Unbj Ambei - R5 0302 D vacuum pump (300 m3/h) - 1000 L vacuum tank - 6 cooling fans DNG 6-22.5 for accelerated cooling times (including cooling air with water cooling) - Maximum lifting capacity of lower and upper tools: 4,000 kg each 1.) IR heater (Ushio) 2.) Quartz heater (TQS) (Depending on the process and material, with its specific advantages) If you have any questions, please do not hesitate to contact us. Sincerely / Best regards i.V. Alexander Reizner Sales and Project Management Service FRIMO Innovative Technologies GmbH

Condition: new, IPETRONIK Interior Simulation Box Here we offer an IPETRONIK interior simulation box. Technical data and description of the system: IPETRONIK Interior Simulation Box (new and unused) The interior simulation box is designed to simulate the passenger compartment for tests in recirculation mode. It has a variable interior volume of 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is regulated and directed into the interior. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulated housing is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overheating via a safety thermostat (ESTI). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The system is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the insulated chamber: Dimensions: External: Width 1,860 mm, Depth 2,360 mm, Height 1,360 mm Internal: Width 1,700 mm, Depth 2,200 mm, Height 1,200 mm Insulation: 80 mm rigid polyurethane foam, CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102 Technical data and description of the system: Connection: Tongue-and-groove system with foam-injected eccentric locking latches. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, polished, grit 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM rhombus pattern, non-slip, Floor with a 90° upturned edge around the perimeter (approx. 15 mm), floor sheet flush with wall sheet, Pressure distribution plate made of laminated wood, can withstand a load of 1,500 N / rubber wheel (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded stainless steel pipe as a floor drain, led downwards through the floor Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.L., DIN left, heated door frame (230 V), Heating tapes are silicone-free, 4-sided sealing profile made of EPDM, Latch closure, lockable, emergency release, Heated viewing window, 500 x 500 mm, triple-glazed, Surface heating (230 V), frame heating (230 V), heating controlled by the customer, Silicone-free edge trim Sliding wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, polished, grit 320, with protective film, closed on the other side with sheet metal (The rear wall is manually adjustable in stepless increments to change the volume) Recirculation system: A heat exchanger (Systemair) for indirect temperature control is installed in the recirculation circuit for temperature control. The air is circulated by a radial duct fan (Cosmo), and heating is provided by an electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by means of temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is carried out via a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo). Installed electrical heating power 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Power supply from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Blodozd Ukpepfx Ambji Rated current: 33A Fuse: 35A Control voltage: 24V DC / 24V AC / 230V AC PLC system: S7 300 Type: IPETRONIK Interior Simulation Box Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions

Condition: excellent (used), pure engineering Type: pureGMC18 Blodpfx Amszd Ukijboi System for manual weighing processes Climate chamber for highly sensitive weighing processes with ultra-microbalances. The weighing chamber is specifically designed for the gravimetric determination of particulate emissions in exhaust gas analysis and complies with the regulatory requirements of environmental authorities. All required climate control components are integrated. In combination with the particulate filter, a contamination-free and precisely conditioned weighing and storage area for the filters is ensured. Features: Precise temperature and humidity control Weather station (p, t, h) for buoyancy correction Dew point mirror (optional) Vibration-damped granite for vibration-free installation of an ultra-microbalance Ionization device against static charge Flow protection to shield the weighing cell Touch panel for intuitive operation Ethernet interface for process data exchange Interior with sockets, grounding bolts Advantages: Complies with regulatory requirements for particle weighing according to: ECE-R83 (light duty), ECE-R49 (heavy duty), EPA1065 (U.S. Environmental Protection Agency) Tested, ready-to-connect design Designation pureGMC18 Temperature 22°C ± 1 K Humidity 45% RH ± 3% Dimensions W/D/H 1,800/800/1,980 mm Cleanroom class 5 (ISO14644-1) Voltage supply 400V, 15A 50/60 Hz Weight: 650 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, from a well-known manufacturing plant in Bulgaria. Bodpfxszd Rygs Ambeli

Condition: excellent (used), IPG Ytterbium Fiber Laser Here we offer you an IPG Ytterbium fiber laser. IPG Ytterbium Fiber Laser Bodpjzd Rmasfx Ambjli 90-240 VAC Type/Model Name: YLP-HP-2-1500-50-100 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have over the phone.

Year of construction: 2005, condition: good (used), machine/vehicle number: 8382, 2-head welding machine for PVC profiles Bjdpezdq Ttofx Ambjli

Year of construction: 2006, condition: used, functionality: fully functional, machine/vehicle number: 12/06, We are offering this used METAL WORKING CZ, s.r.o. SPS2000 CNC hot plate welding machine, manufactured in 2006. Bjdpfszdfc Dox Ambsli If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: good (used), functionality: fully functional, Year of construction: 1996, PVC PROFILE HAUL-OFF UNIT, CONTACT LENGTH 3000X280MM, EQUIPPED WITH 2 NEW AC MOTORS CONTROLLED BY AN INVERTER, AND PNEUMATIC UPPER BELT CLAMPING SYSTEM. Bedpfx Ajzbq Utembsli

Year of construction: 2000, condition: used, Complete Production Line for Shoe Lasts Manufacturing We offer a complete technological production line for shoe lasts manufacturing — a fully integrated and coherent industrial system designed for reliable, continuous production. The entire line is maintained in very good technical condition. All machines are characterized by: High manufacturing quality Robust industrial construction Low wear level Long-term operational reliability Stable production performance This production system enables a continuous and optimized workflow — from raw material preparation, through semi-finished components, to final machining and assembly processes. Blsdoza Ak Repfx Ambei The line represents a complete and proven industrial process, ready for immediate operation in manufacturing conditions. European Industrial Quality All equipment originates from renowned Italian manufacturers, including: ARBO Oleodinamica Donzelli Gruppo San Rocco Meber These manufacturers are recognized for: Precision engineering Durability Industrial-grade performance Proven European manufacturing standards LINE STRUCTURE 1. Raw Material Preparation Section 1.1 Granulation Machine 1.2 Material Mixer 2. Semi-Finished Production Section 2.1 Injection Molding Machine (for blanks) 2.2 Standardization Unit 3. Pre-Machining Section 3.1 Last Cutting Saw 3.2 Pre-Copy Milling Machines (2 units) 3.3 Finishing Copy Milling Machines (2 units) 4. Special Machining Section 4.1 V-Cut Milling Machine 4.2 V-Cut Saw 4.3 French Cut Saw 4.4 French Cut Milling Machine 4.5 Chain Milling Machine for Locks 4.6 Pin Insertion Machine for Locks 5. Drilling, Machining & Assembly Section 5.1 Bushing Drilling Machine 5.2 Bushing Installation Machine 5.3 Multi-Spindle Drilling Machine for Pins 5.4 Last Plate Cutting Machine 5.5 Punching Machine 5.6 Secondary Punching Machine 5.7 Steel Processing Machine 5.8 Plate Forming Machine 5.9 Automatic Trimming Machine 5.10 Last Assembly Tool 6. Finishing Section 6.1 Toe Trimming Machine 6.2 Heel Trimming Machine 6.3 Grinding Machines (2 units) 6.4 Cleaning Machines (2 units) 7. Recycling & Waste Management System 7.1 Chip Grinding Machine 7.2 Industrial Dust Extraction System 8. Tooling Section 8.1 Knife Sharpening Machine

Condition: good (used), Year of construction: 2026, functionality: fully functional, total width: 1,250 mm, total length: 2,000 mm, total height: 3,200 mm, 2 sets of 3 fans, previously used for drying thick veneer sheets. Power consumption: max. 5 kW per set of 3 fans. Blsdpfx Amszat Hcsboi

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, Cutting system for extruded products: 1. NCK-500 HAUL-OFF + CUTTING UNIT (1 pc) Min. Length (mm) Speed (m/min) 180 mm 35 m/min 300 mm 60 m/min General Features - Haul-Off System: Band type - Contact length: 500 mm (special PU coating) - Contact width: 80 mm - Haul-off motor power output: 2 pcs EMF Torque (for each band) - Working range: 5-90 mm - Operating speed: 60 m/min (Operating speed can be adjusted as desired.) - Cutter motor output: 1 kW (Siemens V90 series servomotor and Siemens servo driver) - The working range can be adjusted according to the thickness of the material being processed. - The lower and upper bands will be separately controlled by torque motors and will move synchronously thanks to this system. There will be no belt-pulley in the system to control the tractor belts; the bands will be controlled separately with torque motors. - SICK brand 1024 pulse Encoder will be used for line speed control. - The lower pallet system is fixed, the upper pallet system is movable. - The pulling bands shall be coated with Linatex rubber raw material. - The haul-off unit is controlled by a PLC controller. - The circular saw's servo motor will be PLC-controlled, 1 kW servo motor (Siemens V series). - The upper and lower covers of the water tank with knife shall be made entirely of stainless material. - Cutting tolerance +/- max. 2 mm. - Haul-off covers and cutting blade housing cover are equipped with Pilz brand safety magnetic door sensors. - Pilz brand safety relay is standard in the electrical control panel. - Electrical control panel is manufactured in accordance with Category 4 class standards. - Electricity supply is compatible with 380-400V / 50Hz. - Complies with CE/uL standards. PLC System Features ● A 7'' Weintek touch screen operator panel will be used. Thanks to this panel, the machine will be fully controlled. From the touch screen on the unit operator panel: ● Length to cut ● Pieces to be cut ● Line speed reel view ● Dancer reel position ● Cutting blade magnitude adjustment ● Reel length information ● Order list ● Breakdown information - Fault information is clearly displayed. Bledpezarn Esfx Ambei - There will be an ENG language option. - The unit keeps the number of cuts in its memory since the first operation. - Special menus which are suitable to your current system can be added on the operator panel. Buttons on the Unit - Haul-off Start/Stop - Cutter Start/Stop - Caterpillar move Up/Down - Safety reset - Man/Auto - Speed +/- - Emergency Stop Inter-Bands Distance Adjustment: The lower band system is controlled manually.

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Operating voltage: 3 x 400 V AC EQUIPMENT Movable heavy-duty base frame Robust prismatic supports Linear guides Numerous clamping and positioning points Blsdpozaqtyjfx Ambei External reference: 768