Concrete Surgeons جراحين الخرسانة

Condition: used, This listing is for a Applied Biosystems API 2000 MDS SCIEX LC/MS/MS This system was previosly paired with the Shimadzu SIL-HIT HPLC system. It has been removed from the lab while in good working condition, it was well serviced and is still in very good condition. Equipment can be serviced/renovated/refurbished on request at extra cost. Ndodpsxzhpmjfx Ah Nod

Condition: excellent (used), Year of construction: 2019, Equipment: motor brake,

Condition: used, This listing is for a Shimadzu SIL-HT HPLC System Shimadzu SIL-HT Auto Sampler Shimadzu LC-10AD VP Shimadzu LC-10AD VP DGU-14A Degasser SPD-10AVP UV-VIS Detector This unit was previosuly being used with the CTO-20AC Column oven and the Applied Biosystems API 2000 It has been removed from the lab while in good working condition, it was well serviced and is still in very good condition. Njdpfx Aexzhn Aeh Nedd Equipment can be serviced/renovated/refurbished on request at extra cost. THIS IS ITEM DOES NOT COME WITH THE SHIMADZU CTO-20AC COLUMN OVEN

Condition: used, This listing is for a Dionex HPLC System Dionex AS3500 Dionex GP50 Gradient Pump Dionex ED50 Electrochemical Detector Dionex AD250 Absorbance Detector Dionex LC25 Cromatograph Oven Bottle trays This system has been removed from the lab while in good working condition, it was well serviced and is still in very good condition. Equipment can be serviced/renovated/refurbished on request at extra cost. Nedpfxsxzhm Ss Ah Nedd

Condition: used, Year of construction: 1990, TWO SIDE TABLES WITH AIR 2 SPARE KNIVES Ndodpsxzhmxsfx Ah Njd

Condition: used, This listing is for a Promega Maxwell 16 MX3030 Magnetic Particle Processor Automated DNA Extraction from up to 50mg Tissue Purifies up to 16 samples at a time Integrated grinding replaces Proteinase K treatment and manual grinding Purified DNA is ready for downstream amplifications Nedpfx Aexzhmrjh Njdd

Condition: used, This listing is for a Siemens Immulite 1000 Automated Immunoassay System Ndsdpfxoxzhmfo Ah Nod

Condition: used, This listing is for a Hook and Tucker Rotamixer vortex mixer Nsdpfx Asxzhk Roh Nodd

Condition: used, This listing is for a BioRad Model 200 / 2.0 Power Supply Ndjdpfx Ahoxzhkwo Nod

Condition: used, This listing is for a Qiagen Rotor-Disk Heat Sealer The Rotor-Disc Heat Sealer is used to seal Rotor-Discs for the Rotor-Gene Q. Rotor-Discs do not use caps. Instead, Rotor-Disc Heat Sealing Film is applied and sealed using the Rotor-Disc Heat Sealer. The film prevents contamination by providing a strong, durable, and tamper-proof seal. Ndsdpfx Ahoxzhkqs Nsd

Condition: used, Year of construction: 2024, functionality: fully functional, machine/vehicle number: TEG051P3-20 - 2200413903, cooling capacity: 10.5 kW (14.28 HP), type of input current: three-phase, type of cooling: water, overall weight: 336 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -20 °C, input voltage: 400 V, pressure: 6 bar, temperature: 7 °C, volume flow: 1.77 m³/h, pump pressure: 2.87 bar, total width: 660 mm, total length: 1,315 mm, total height: 1,420 mm, warranty duration: 3 months, Equipment: type plate available,

Condition: used, This listing is for a Zebra TLP 3844-Z Printer Ndodpoxzhiysfx Ah Nod

Condition: used, This listing is for a BioRad ID-Incubator 37 S I Ndodpsxzhimefx Ah Njd

Condition: used, This listing is for a VWR Mini Star Silverline Centrifuge Ndjdpfx Ahoxzhiae Nsd

Condition: used, This listing is for a Leica HM-LUX Microscope Objectives Nodpfoxzhh Nsx Ah Nedd 10/0.25 40/0.65

Condition: used, This listing is for a Abbott 75003530 Centrifuge Ndedpfxsxzhh As Ah Nsd

Condition: used, This listing is for a Thermo Electron Corporation CR 4i Refrigerated Centrifuge Ndodpfx Ajxzhhish Nod Specifications Capacity: Swing-out rotor: (4 x 750 mL) 3000 mL Fixed angle rotor: (8 x100 mL) 800 mL Maximum load: 3.6 kg Speed range: 500 to 7800 rpm RCF range: 20 to 9900 x g Temperature range: -9°C to 40°C Dimensions (H x W x D): 45 x 85 x 66 cm (16.5″ x 33.5″ x 26″) Weight: 106 kg (233 lbs) Electrical: 120V, 60 Hz

Condition: used, This listing is for a Miltenyi Biotec AutoMACS 003 The autoMACS Separator is a benchtop instrument for high-speed automated cell sorting. Employing the MACS Technology, the autoMACS Separator is designed for positive selection as well as depletion of magnetically labelled cells. The autoMACS Separator is operated with pre-set separation programs, thus, allowing optimization of cell sorting approaches according to cell abundance and the intensity of marker expression. The separated cells are immediately ready for experiments, cell analysis, or further subset sorting. Njdpjxzhhcofx Ah Njdd

Condition: used, This listing is for a Raymond A Lamb E22 Cassette Labeller The Cassette MicroWriter System is ideal for automating the referencing of processing cassettes with relevant specimen information – providing a secure method of cassette identification. Controllable via an RS232 serial interface, it is possible to link the unit to a wide range of computer equipment and Bar Code systems. This item was removed from a life science lab as surplus to requirements. Features Should the unit run out of cassettes during the sequence, an audible alarm will sound MicroWriter has a serial interface and is controllable from any device with a RS232 communications port. MicroWriter responds to a restricted set of 127 ASCII characters. Special characters are available upon request including foreign languages and customised symbols. Technical Specifications Hopper Capacity: 75 cassette x 6 Tape: 29mm Wide Njdpfxexzhg Sj Ah Nedd

Condition: used, This listing is for a Tissue-Tek TEC 4715 Embedding centre with Cryo console Coldplate Ndjdpfjxzhg Esx Ah Nod

Condition: used, This listing is for a Thermo Electron Corporation Shandon Histocentre 3 Coldplate Nodpfx Ahexzhgxs Nedd

Condition: used, This listing is for a Raymond A Lamb E22 Slide Microwriter Ndjdpfx Ahjxzhgro Njd

Condition: used, This listing is for a DiaPath HCM6000 Automatic Coverslipper Ndodoxzhgljpfx Ah Njd

Condition: used, functionality: fully functional, mileage: 524,006 km, power: 285 kW (387.49 HP), first registration: 09/2017, overall weight: 44,000 kg, fuel type: diesel, color: white, axle configuration: 6x2, operation weight: 26,000 kg, maximum load weight: 13,953 kg, empty load weight: 11,972 kg, tire size: 315/80 R 22.5, fuel: diesel, wheelbase: 5,500 mm, brakes: retarder, driver cabin: other, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 8,400 mm, loading space height: 2,400 mm, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, retarder, spoiler, tail-lift, traction control, RENAULT D26 WIDE 380 – 6X2 – EURO 6 – SAVOYARDE BOX WITH 2-TON TAIL LIFT – RETARDER! First Registration: 04/09/2017 524,006 KM Ndjdpfx Ahjxzhgfe Nod Engine: DTI 11 – 388 HP EURO 6 Standards AdBlue GLOBAL Cab Wheelbase: 5,500 mm Rear Air Suspension Raise/Lower Valve 3rd Lift Axle ABS – EBS – ASR – Hill Start Assist – AEBS – Lane Departure Warning Optidriver 12-Speed Automatic Transmission Optibrake Engine Brake Voith Hydraulic Retarder Differential Lock Rear Towing Crossmember Without Hook Cruise Control Onboard Computer Air Conditioning Sun Visor Electric Windows & Mirrors Roof Spoiler SAVOYARDE BOX BODY: 3 Drop-Down Aluminum Side Boards per Side Sliding Curtains 2 Rear Doors Internal Dimensions: 8,400 x 2,480 x 2,400 mm Retractable DHOLLANDIA Tail Lift, Type DSHM.30, Capacity: 2,000 kg Tyres: 315/80 R 22.5 Unladen Weight: 11,972 kg GVW: 26,000 kg

Condition: used, Year of construction: 2010, operating hours: 2,635 h, 2010 | Atlas Copco Boomer XE3C with COP 1838, very good condition, one defect (EPIROC) | Used Drill | 2635 hours 📍Location: Switzerland, Weite 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 98000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Njdpfxjxzhf Io Ah Nsdd 👷‍♂️ Inspected by an independent expert 49 inspection points 46 approved ✅ 2 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Honest machine from two-tier system, three drilling arms, an additional tamping platform - no maintenance backlog, drive axle "with one blow" broken, no decomposition of the tooth flanks, rather shaft fracture suspected, no external bursting of the differential housing or the axle journals, casting in order. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39154 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.