VITAP Costruzioni Meccaniche S.p.A.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, School machine Working area X: 3150 mm Crjdszbruuspfx Aipoc Working area Y: 1180 mm 8 kW electro-spindle, ISO30 tool holder 14 vertical drilling heads 4 horizontal drilling heads (X-axis) 2 horizontal drilling heads (Y-axis) Blade for grooving in the X direction Circular tool changer with 12 positions Worktable with 6 stops Software: Master Cabinet Control panel Becker Picchio 2200 vacuum pump, 90 m3/h Safety guards Approximate weight: 2800 kg Only 4398 operating hours Includes 1 unit with 2 outlets, suction cups, 10 clamps (8 vertical and 2 horizontal) MasterCabinet USB drive Available July 2026

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Krüsi Krüsimatic G2 – Factory-reconditioned cutting machine with new control system and 12-month warranty The Krüsi Krüsimatic G2 has been completely overhauled and technically modernized by Krüsi Maschinenbau AG. As part of the overhaul, the machine receives a new control system, new controllers, new servo motors, and a completely renewed wiring harness. In addition, the mechanics are inspected and repaired. Technical advantages New control system with current software architecture New servo drives for precise and dynamic axis movements Complete new wiring harness to increase operational safety BTL interface for direct connection to modern CAD/CAM systems Extensive processing options on two independent frames High flexibility for cutting operations Factory warranty of 12 months on mechanics and newly installed components Crjdpezbqw Uefx Aipec Long-term service and spare parts support from the manufacturer Technical data Workpiece cross-section: max. 200 × 320 mm Infeed length: 10,000 mm Outfeed length: 10,000 mm Supply voltage: 3 × 400 V / 50 Hz Fuse rating: 3 × 63 A Pneumatic pressure: ≥ 8 bar Air consumption: 10–15 m³/h Control system: IST software / Abb3D Interface: BTL-compatible Processing units Frame 1 5-axis sawing unit (angle-limited) 4-axis milling unit with 5-position spindle head (horizontal) and marking device 4-axis notching unit with 2-position spindle head (vertical) Drilling unit with two horizontal tool holders Chain slotting unit Frame 2 Two vertical chalet milling motors Two horizontal chalet milling motors Two horizontal drilling units Grooving milling unit, horizontal and vertical Accessories Extensive tool equipment included Two compressed air tanks to reduce the weight load on the frames

Condition: used, Year of construction: 2016, power: 7 kW (9.52 HP), workpiece length (max.): 3,000 mm, workpiece width (max.): 920 mm, workpiece height (max.): 50 mm, total height: 1,950 mm, total length: 2,100 mm, total width: 1,605 mm, overall weight: 850 kg, Equipment: CE marking, No. 3275 CNC machining center Format4 c-express 920 classic Used, year of construction 2016 CNC machining center / CNC drilling center for drilling, sawing, and milling operations from below Max. workpiece dimensions: X 3000 mm / Y 920 mm / Z 50 mm Min. workpiece dimensions: X 280 (270) mm / Y 180 (70) mm / Z 10 mm Incl. collet clamping system for CNC through-feed technology Laser “0” double reference Drilling head DH15 6H1S (9 vertical and 6 horizontal drilling spindles / 1 grooving saw in X direction) Very simple operation via graphical user interface 1 machine software licence 1 machine workstation with CAD function 19" LCD colour display, mouse and keyboard Additional roller inserts to reduce the minimum workpiece width to 70 mm 1 milling spindle 3.3 kW (S1) / manual ER32 collet / max. speed 24000 rpm 1 additional vertical clamp 1 roller table extension at the front and rear 1 DP shank cutter D12/NL23.5/Z2+2+Q/GL80/S20 RL, diamond-tipped version 1 collet 20 mm ER 32 DIN 6499 2 carbide dowel drills HW/D5/NL43/S10x20/GL70/RL 3 carbide dowel drills HW/D5/NL43/S10x20/GL70/LL 1 carbide through-hole drill HW/D5/NL44/S10x20/GL70/LL 3 carbide dowel drills for blind holes with back guide, right-hand cutting, D=8 mm, BT=30 mm, GL=57.5 mm, shank 10x20 mm 3 carbide dowel drills for blind holes with back guide, left-hand cutting, D=8 mm, BT=30 mm, GL=57.5 mm, shank 10x20 mm 1 carbide dowel drill HW/D8/NL43/S10x20/GL70/LL 1 carbide hinge boring bit HW/D15/S10x26/GL70/Z2+2/RL 1 carbide hinge boring bit HW/D35/S10x26/GL70/Z2+2/RL 1 carbide circular saw blade: 100x5/3.6x20 Z24/FZ, without pinholes X-axis speed 25 m/min Y-axis speed 25 m/min Z-axis speed 15 m/min Electrical connection 7.0 kW Motor power drilling head 1.5 kW Drilling head speed 3600 rpm Circular saw unit speed 9000 rpm Max. number of horizontal spindles 2+2, 1+1 / distance between horizontal spindles 32 mm / max. diameter of horizontal spindles 15 mm Max. number of vertical spindles 9 / distance between vertical spindles 32 mm / max. diameter of vertical spindles 8x 15 mm, 1x 35 mm Max. circular saw blade diameter 100 mm Max. horizontal drilling depth 30 mm Max. vertical drilling depth 55 mm Min. workpiece length 270 mm Compressed air connection: operating pressure 6 - 8 bar / nominal compressed air consumption 60 NL/min / air consumption 1650 m3/h Extraction: extraction hose diameter 140 mm / min. air velocity 26 m/s / min. nominal negative pressure 1000 Pa / min. volume flow 1440 (1050) m3/h Safety equipment according to CE conformity Incl. operating manual Transport dimensions approx. 2100 x 1605 x 1950 mm LWH Weight approx. 850 kg Sale on behalf of customer, ex location near 65929 Frankfurt am Main, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Codpfx Aozbcrdjiporc Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment

Condition: good (used), total length: 24,000 mm, overall weight: 11,000 kg, HUNDEGGER P10 – CNC AUTOMATED TIMBER PROCESSING CENTER For sale: a Hundegger P10 machine designed for processing timber components. The machine is in good working order and is currently in production. Until July 15th, there is an opportunity to view the machine in operation and check all its functions before purchase. Key information: * Machine in continuous operation * Demonstration of operation possible * CNC control * Processing of roof truss elements, frame structures, and other carpentry components * High accuracy in performing joints * Design known for its durability and ease of maintenance Unlike many machines offered after disassembly, here the buyer can verify the technical condition during normal operation of the facility. The machine is available for inspection by appointment. Credpfxjza T Sxs Aipec More information, photos, and videos of the machine in operation will be provided to interested parties.

Condition: used, Year of construction: 2015, total height: 1,850 mm, total length: 2,300 mm, total width: 1,950 mm, Colour: White Empty weight: 1.240 kg - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Main motor power [kW]: 2.2 - Number of controlled axes [pcs]: 12 - Working range X [mm]: 3050 - Working range Y [mm]: 800 - Working range Z [mm]: 60 - X-axis max stroke [mm]: 1040 - Y-axis max stroke [mm]: 1030 - Z-axis max stroke [mm]: 100 Crjdjzavvgepfx Aipjc - Number of milling spindles [pcs]: 8 - Spindle diameter [mm]: 10 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 18 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 8 - Max. drilling depth [mm]: 30 - Saw unit present: Yes - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 59978, functionality: fully functional, BIESSE SKIPPER 100 CNC Drilling and Machining Center For sale: BIESSE SKIPPER 100 high-performance CNC through-feed machining center designed for drilling, routing and grooving operations in furniture production and panel processing. The machine offers excellent productivity, high machining accuracy and compact industrial construction. Technical Specifications Manufacturer: BIESSE Model: SKIPPER 100 Axes X-axis travel: 3,000 mm Y-axis travel: 1,000 mm Z-axis travel: 60 mm Crsdjzatrrspfx Aipoc Workpiece Dimensions Length: 90 – 3,000 mm Width: 70 – 1,000 mm Thickness: 8 – 60 mm Spindle Unit HSK electrospindle Spindle speed: 6,000 – 18,000 rpm Spindle power: 3.5 kW Total installed power: approx. 20 kW Drilling Units Per operating unit: 29 vertical drilling spindles 8 horizontal drilling spindles along X-axis 2 horizontal drilling spindles along Y-axis Total: 78 independent spindles Upper and lower machining units Equipment Automatic panel size detection Electronic thickness control Central automatic lubrication BiesseWorks software Roller loading table Unloading conveyor Dust extraction connections Safety enclosure Machine Dimensions Overall length: 7,290 mm Overall width: 4,400 mm Height: approx. 2,000 mm Weight: approx. 2,700 kg The machine is in good working condition and can be inspected under power by appointment. Photos, videos and additional technical information available upon request.

Condition: used, Year of construction: 2006, machine/vehicle number: BM0000029, controller model: WINDOWS XP, number of spindles: 42, plate height: 60 mm, plate length: 2,800 mm, plate width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Vertical CNC machining center for drilling, milling, and dowel insertion with an additional robotic arm for loading! The machine must be picked up between June 10, 2026, and June 30, 2026! The machining center consists of two machines as follows: 1. BIESSE BREMA VEKTOR 15-18 R Working area X-axis: 2,800 mm Working area Y-axis: 1,300 mm Number of controlled axes: 3 axes Total number of drilling spindles: 42 Total number of tool changer positions: 10 Maximum panel thickness: 60 mm Automatic panel loading system Automatic panel stacking system Drilling units Drilling unit 1: Horizontal drilling spindles in X Number of horizontal drilling spindles in X: 9 Credoy Uvnaspfx Aipsc Drilling unit 2: Horizontal drilling spindles in Y Number of horizontal drilling spindles in Y: 9 Drilling unit 3: Vertical drilling spindles Number of vertical drilling spindles: 24 Milling spindle Number of milling spindles: 1 Number of controlled axes milling spindle: 3 Automatic tool changer: Yes Number of tool magazine slots: 10 Control and safety Control system: WINDOWS XP Machine programming software: BKEEPER Safety standard: EC marking Safety system: Safety light curtains 2. KUKA KR 180 L100-2 K 2000 Maximum panel width: 1,300 mm Maximum panel length: 2,800 mm Maximum payload: 100 kg Number of controlled axes: 6 Arm reach: 3,700 mm Number of panel stacking stations: 3 Control system: KR C 2 EQUIPMENT Automatic panel loading system Automatic panel stacking system Barcode scanner HONEYWELL Protective netting on the machine The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8530

Condition: like new (used), 1 milling unit Crsdpfx Aisy Ukzzjpsc 8 vertical drills 6 side drills 1 saw 12 kW Year of manufacture: 2011

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 305.04.029.21, functionality: fully functional, operating hours: 5,820 h, input voltage: 400 V, type of input current: three-phase, table length: 3,090 mm, table width: 2,095 mm, Equipment: documentation/manual, Felder Format A4 milling plotter. The machine is fully functional and has been used. - Machine equipped with two Becker 500m3/h pumps. - Automatic tool length measurement. - Handheld terminal for axis control. - HSK63 tool holder with magazine. Csdpfx Aoy Tuw Roiperc - 2 rows of limit stops (6 in total, 3 on the left and 3 on the right side of the machine). - Foot pedal for vacuum activation. - Automatic lubrication. - The machine’s production program is TPA CAD. - Yaskawa servo drives, Festo pneumatics. - HSD main spindle.

Condition: used, Year of construction: 2014, Working dimensions: X = 3425 mm, Y = 1287 mm, Z = 325 mm. Max. workpiece height: 180 mm. Max. clearance under the hood: Y = 1450 mm / Bumper version = 1370 mm. Includes CabinetControl Base, 1 machine license, and 1 office license. Milling head 7830, 1-stage, power 6.5 kW, air-cooled, n(max.) 1000 - 18000 min-1, infinitely adjustable. Max. power at 12000 min-1 to 18000 min-1 with HSK-F 63 tool holder, with collet chuck with HSK shank. Drilling unit 7884, 14 spindles, 10 vertical spindles individually accessible, arranged in an L-shape, 6 in the X direction and 4 in the Y direction. Drive power 3 kW, 32 mm pitch. Sawing unit: Integrated sawing unit for sawing/grooving in the X direction, n(max.) 1000 - 5650 min-1, infinitely adjustable. Tool holder: A = max. DM = 125 mm. Location: Supplier. Csdpfxoy Tpz Rs Aipjrc

Condition: used, Year of construction: 2014, machine/vehicle number: 33041, functionality: fully functional, power: 4.5 kW (6.12 HP), travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 90 mm, Equipment: CE marking, The machine has been regularly maintained and is in excellent working condition. Linear guides and ball screws are in excellent condition without any play. Input and output tables are fully functional. The transport clamps operate powerfully and in sync. The drilling system is equipped with 82 spindles. Both the upper and lower milling units use ISO 30 tool holders. The motor bearings are in good condition and run at 24,000 rpm. The machine is operated via the BiesseWorks interface. The electrical components inside the control cabinet are clean and dust-free. Crodpfjy Sfi Iex Aipsc

Condition: good (used), Code: 0382 Brand: ALBERTI Model: BASIC PLUS CN - CE Standard CNC working centre for furniture and fittings – CE Standard Top vertical “point-to-point” drilling machine with continuous feed, with panel loading and longitudinal movement, with a monolithic structure made of electro-welded steel. Independent control of 3 axis with optimised drilling and insertion cycles Panel dimensions: Codpfx Aiey R U Abeperc Max 3000 x 1200 x 60 mm Min 300 x 110 x 15 mm (automatic loading/unloading) Min 300 x 110 x 8 mm (manual loading/unloading) Monoblock configuration with independent spindles: N° 16 independent vertical spindles with centre-to-centre distance 32 mm , along the Y-axis (Assembly) N° 3 horizontal drilling heads, with dual output in X direction pitch 32 mm and vertical presser, mounted on the side of the monoblock N° 10 independent vertical spindles with centre-to-centre 32 mm arranged along the X axis (Fitting) N° 1 horizontal drilling head with dual output in Y direction and vertical presser Workbench configuration: Loading roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Reference surface inside the machine body, consisting of ground PVC-coated idler rollers, with a usable width for panel support 1000 mm Work surface height 920 mm, adjustable +/- 30 mm Discharge roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Panel guide bar with automatic positioning movement Vertical clamps mounted on the panel guide bar, automatically adjusted to the workpiece thickness via pneumatic cylinders Vacuum pump 40 m³ Milling unit“Electric spindle” 9 Hp Tool holder HSK-63F for AUTOMATIC/MANUAL tool change system. Speed selectable via program (12.000/18.000 rpm) - Device capable of performing milling operations in X and Y directions, both linear and interpolated, within the machine’s technical limits. Rotation in both Right and Left directions. Tool Ø max 40 mm – N°1 HSK-63F right included Automatic tool changer Equipped with 4 positions for the automatic retrieval of tools with max diameter 40 mm. Includes a set of 4 shanks for taper ISO 30 . Compatible with milling unit – N° taper HSK-63 included Circular blade unit: Composed by independent motor 1,8 Hp, speed 12.000 rpm, capable of cutting grooves in X and Y directions within the machine’s technical limits. Tool mounting with flange, max bore Ø 120 mm, max thickness 8 mm Control panel and numerical control unit Mod. ALBNT (TPA): operating system Windows XP - ALBATROS TPA software Installed power 12 Kw Compressed air 6/7 bar Extraction: speed 30 m/s - Flow rate 8686 m³/h Overall dimensions: see attached sheet Weight kg 3500

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, The automatic drilling machine Jet Smart is the ideal solution for craftsmen and small and medium enterprises. Flexibility, speed and ease of use are the main features of the machine which ensures high productivity and a perfect drilling in any working condition. Fast and precise drilling! Boring from the top: a choice without compromises! Perfectly aligned joints aligned and no error thanks to automatic reading of piece dimension, that allows to correct any difference between real panel length and the one set. Crsdpsy Rl Arofx Aipjc ///Technical details Max. piece dimension - 3050x900x60 mm Min. piece dimension - 200x70x10 mm Max. speed axis X-Y - 40-40 m/min Boring head: vertical / horizontal spindle, blade X - 12 / 6, 125 mm Electrospindle (S6) - 5,5 kW (7,5 HP) - 18.000

Condition: used, Year of construction: 2017, functionality: fully functional, For sale: CNC drilling and milling center Morbidelli Uniflex S (SCM Group), year 2017, serial number AA2/004505. Weight 4,450 kg, power supply 400V/3-phase, 46A/50Hz. The machine is in working condition. Contact us for more information and price. Codpfx Asy N Tmpoiperc

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 920 mm, workpiece height (max.): 70 mm, number of slots in tool magazine: 6, actuation type: pneumatic, total height: 2,350 mm, total length: 3,675 mm, total width: 1,660 mm, overall weight: 2,500 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HOLZ-HER Vertikale CNC Evolution 7405 4mat, Baujahr 2014, Lieferung ab Standort Bearbeitungslänge: 3.200 mm Werkstückabmessungen: X = 200 – 3.200 mm (bei zusätzlicher Auflage auch länger möglich) Y = 70 – 920 mm Werkstückdicke: Z = 8 – 70 mm Maximale Bearbeitungslänge auf X-Achse ohne Umspannen: X = 1.500 mm Z-Achsen-Verfahrweg = 240 mm Maximal programmierbare Geschwindigkeit: Vektorgeschwindigkeit: 68 m/min Cjdpfx Aiey Ny Uyopsrc X = 25 m/min, Y = 60 m/min, Z = 20 m/min Software: CAMPUS V6 – Single Evolution 19-Zoll TFT-Flachbildschirm Höhenverstellbarer Rollentisch zur 4-seitigen Bearbeitung. Komplette Formgebung der Werkstücke durch präzises Fräsen aller vier Seiten möglich. Druckluft-Vakuumsystem Absaugung am Werkzeugkopf 2D Barcode-Scanner Bohraggregat 7883, 15 Spindeln, 1,7 kW Leistung (9 vertikal, 6 horizontal) Performance-Paket, bestehend aus: 7830 Fräsaggregat 6,5 kW (S6) HSK F-63 Werkzeugwechsler 7887 mit 6 Werkzeugplätzen (Pick-up-Typ) Manuelle Schmierung, kombinierter Schmierversorgungspunkt

Condition: good (used), Year of construction: 2013, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, workpiece width (max.): 920 mm, workpiece height (max.): 50 mm, number of axes: 3, actuation type: electric, overall weight: 820 kg, Equipment: CE marking, Drilling machine, compact CNC machining center Vitap Point 2, year 2013, machine is operational and ready for inspection. It has been with our company since new, operated on a single shift as an auxiliary machine, and has not been in use for the past 5 years. Comes with a new toothed drive belt installed, plus one spare. TECHNICAL SPECIFICATIONS Drilling and milling unit - Number of independent vertical spindles: 8 - Number of horizontal spindles on X axis: 4 - Number of horizontal spindles on Y axis: 2 - Saw unit – diameter: 100 mm - Milling head: 3.6 kW ISO 30 – 12,000/24,000 rpm - Spindle rotation speed: 3,600 rpm - Saw rotation speed: 7,000 rpm - Maximum horizontal drilling depth (X and Y axes): 30 mm - Maximum vertical drilling depth: 45 mm - Maximum horizontal tool diameter: 12 mm - Maximum vertical tool diameter: 35 mm - Number of controlled axes: 3 - Motor power: 1.5 kW Workpiece specifications - Maximum panel thickness: 50 mm - Maximum panel weight: 25 kg - Maximum panel size: X 1,100 mm, Y 50 mm - Minimum panel size: X 270 mm, Y 150 mm, Z 12 mm - Panel feed speed: 25 m/min MACHINE PARAMETERS Crsdoy Nyqhspfx Aipec Electrical data - Rated voltage: 400 V - Frequency: 50 Hz - Rated current: 21.1 A - Total power: 6.4 kW Air pressure: 7 bar Weight: approx. 715 kg

Condition: used, machine/vehicle number: 008527, X axis working area: 6000 mm Cedpfxoy Nx Ufj Aiporc Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 21 Total number of tool changer positions: 77

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 12,666 h, power: 12 kW (16.32 HP), MACHINING CAPACITIES: - X-axis (U) vertical milling travel: 3875 mm, 3170 mm between stops - Y-axis (V) milling travel: 1390 mm between stops, for drilling: 1201 mm - Z-axis (W) milling travel: 290 mm Maximum workpiece height (thickness), effective travel: 110 mm For further details, see aggregate travel schematic - Maximum traverse speeds: X-axis (U): 60 m/min Y-axis (V): 50 m/min Z-axis (W): 20 m/min MACHINE CONFIGURATION: - Worktable with 6 mobile support beams, equipped with several vacuum pods and pneumatic clamps 2 pneumatic connections per beam for clamps, usable capacity ranging from 44 to 78 mm 6 rear stops Csdpfsy Nb Tkjx Aiperc 6 intermediate stops 3 right lateral stops 3 left lateral stops 4 lifting blades (for loading/unloading assistance) Table divided into 2 working zones - Becker VTLF vacuum pump 250 m3/h, 5.5 kW with air filter - Pfannenberg cooling unit 1.7 kW - Chip conveyor belt - X-axis movement by rack and pinion, Y & Z axes by ball screw and bearing block (high-precision linear guides with automatic lubrication) - Aggregates on swan-neck, composed as follows: • 12 kW HSD milling/routing unit - Toolholder type: HSK 63 F - Variable spindle speed 6000 - 24000 rpm - Inverter-controlled - Surround extraction hood - Onboard tool magazine with 10 stations + additional 12-station magazine • 11-spindle drilling unit, 1.7 kW - Center distance between spindles: 32 mm - Spindle speed: 4000 rpm - 11 vertical spindles (8 along X, 3 along Y) - 2+2 horizontal spindles on X - 1+1 horizontal spindles on Y • Control panel - Windows PC - Network card and Ethernet connection - Software: Masterworks and user manual - DXF conversion and direct execution of ISO, TLF, DXF - Pre-programmable zones - Remote control OTHER FEATURES: - Overall electrical supply: 400V, 3Phases+N+E, 50Hz Nominal current: 58.6A, 46.6 KVA - Pneumatic supply: 7/8 Bar - Average consumption: 100Nl/min - Extraction Lower port Ø120 mm, upper port Ø250 mm Recommended flow rate: 6500 m3/h at 20 m/s - CE certified, safety zones and protective grille Lockable isolator, emergency stops Operating footprint: see schematic Transport dimensions: to be specified during equipment preparation Estimated total weight: 2400+350+350 kg Please contact us for supply of consumables, accessories and/or extraction systems. Original documentation, manual, spare parts list, electrical and pneumatic diagrams, service keys, software and license keys included.

Condition: used, Year of construction: 2019, functionality: fully functional, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 80 mm, workpiece length (max.): 99,999 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 50 mm, workpiece weight (max.): 40 kg, number of axes: 3, number of slots in tool magazine: 4, controller manufacturer: TPA, actuation type: electric, total height: 2,140 mm, total length: 3,080 mm, total width: 1,610 mm, overall weight: 1,515 kg, year of last overhaul: 2025, feed rate X-axis: 25 m/min, milling spindle speed (max.): 3,600 rpm, saw blade speed: 7,000 rpm, Equipment: CE marking, documentation/manual, Technical Data - Number of independent vertical spindles: 12 - Number of independent horizontal spindles on X-axis: (2+2) Crsdpfx Aijy Id Rispsc - Number of horizontal drilling spindles on Y-axis: (2+2) - 1 saw blade (Ø 100 mm) - 5 kW electrospindle with ISO30 taper (12,000-24,000 rpm) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited / Y 1,250 mm / Z 50 mm - Min. workpiece dimensions: X 270 mm / Y 150 mm (70 op) / Z 3 mm - Feed speed: 25 m/min - Spindle speed: 3,600 rpm - Saw blade speed: 7,000 rpm - Max. horizontal tool Ø: 12 mm - Max. horizontal drilling depth on X and Y axes: 35 mm - Max. vertical drilling depth: 43 mm - Max. vertical tool Ø: 35 mm - Motor: 1.7 kW - Adjustable zero point for four-sided sizing - CE compliant The DDT Feed System: Double Dynamic Transport Two clamps ensure continuous workpiece transport. The operator feeds the workpiece up to the stop. Both clamps grip the workpiece and position it precisely. During machining, the clamps communicate with each other so that clamp #2 holds the workpiece before clamp #1 releases it. This ensures a constant feed rate even during linear milling operations. - Laser measurement for detection of workpiece start and end. - Measured values can be incorporated into and used to adapt the respective program. - Side stops with rollers, consisting of a fixed and a movable part, equipped with a mechanical digital indicator for automatic alignment to the zero stop, allowing a material removal of 1 mm up to 3 mm along the zero line. - Constant lateral pressure device for precise positioning at the zero line. - Automatic four-position tool changer - Adjustable zero point - No limitation on workpiece length Peripherals and additional features - LCD-TFT monitor - Industrial PC - User interface WSC with list mode, parametric tooling, and parameterizable setup - USB port - Storage of all files - Macro programming - Import of DXF files possible

Condition: excellent (used), Year of construction: 2023, I sell the throughfeed CNC drilling machine HOMAG Weeke Drillteq V-200 (BHX 055), Year 2023. Configuration: 1pc. milling head with tool change 4 positions HSK63 13 + 4 + 2 pcs. drilling units 1pc. grooving saw Crsdpfjy Hfp Rox Aipoc Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. With full documentation and CE. Very good condition. Available immediately.

Condition: good (used), Year of construction: 2018, machine/vehicle number: AB00004121, functionality: fully functional, operating hours: 5,581 h, power: 8 kW (10.88 HP), input voltage: 400 V, input current: 65 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 1,900 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 95 mm, workpiece weight (max.): 50 kg, number of axes: 6, number of slots in tool magazine: 6, controller manufacturer: NUM, actuation type: pneumatic, total height: 2,450 mm, total length: 4,680 mm, total width: 2,225 mm, overall weight: 2,343 kg, table length: 1,350 mm, Equipment: CE marking, documentation/manual, We are offering this well-maintained Morbidelli CX200 vertical woodworking centre, year of manufacture 2018. Manufacturer: Morbidelli Model: CX200 Year of manufacture: 2018 Condition: good Crodpfx Aisy E N E Hspjc Category ID: 2502 Type ID: 4257 Machine type: Vertical woodworking centre If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-250-11-2614, functionality: fully functional, Processing support bottom Processing support top Workpiece length: min. 250 – max. 3000 mm Workpiece width: min. 70 – max. 1000 mm Workpiece thickness: min. 8 mm – max. 80 mm Workpiece stacking: max. 2 pieces Csdoy Ezgispfx Aiperc Equipment: DOWEL INSERTION STATIONS x 2 VERTICAL DRILLING UNIT 2V38 HIGH SPEED 7500 HORIZONTAL DRILLING UNIT 2H8X/2Y GROOVE SAW UNIT N2 X-Y 90 MILLING UNIT F2-ETP-6 kW CONTROL SYSTEM: POWERCONTROL WITH POWERTOUCH BARCODE READING SYSTEM ENERGY SAVING FUNCTION

Condition: used, machine/vehicle number: 008495, X axis working area: 3050 mm Y axis working area: 1400 mm Cedpfx Asy Edqqoiporc Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Maximum edge height: 45 mm Total number of drilling spindles: 21 Total number of tool changer positions: 12

Condition: used, Year of construction: 2011, X-Y working area: 4,422 x 1,753 mm X-Y travel: 4,955 x 1,918 mm Z-axis travel: Z = 400 mm 5-axis MORBIDELLI milling spindle C-axis rotation: 650° B-axis tilt: 290° (-10°) Power: 11 kW at 20,000 rpm, adjustable via inverter Liquid cooling HSK 63F interface Chip conveyor Automatic CNC central lubrication RAPID 24 tool changer (24 tool positions) Drill head extension with 30 + 6 spindles 8 positioning aids 2 cross lasers Vacuum pump 250 m³/h PC control with Windows Office Weight approx. 5,000 kg Storage location: Customer Cedoy D Rv Dopfx Aiperc

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Crsdpfxjy Dta So Aipoc