GH-Maschinenhandel GmbH

Condition: excellent (used), Grinding Machine LOROCH type: AK very good condition loaded on a truck fixed price Iisdpsxn Uitofx Afpeh

Condition: excellent (used), for grinding saw blade diameters from 30 up to max. 300 mm Grinding wheel diameter 150 mm, lots of accessories Iiodjxmuxrepfx Afpoh good, well-maintained condition Operating manual is available

Condition: good (used), Year of construction: 1995, operating hours: 10,500 h, functionality: fully functional, machine/vehicle number: 2048, Sharpening machine for circular saw blades on the front (face) side. Condition GOOD. Ijdoxlu Azspfx Afpsih

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Ijdpexliguefx Afpoih Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm Iisdpfxsxlfwps Afpoh With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: used, Year of construction: 2009, Suitable for automatic grinding of carbide circular saw blades on the face and back in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be grinded automatically and in a single pass. Accessories: Total enclosure, ND 230 loader (3-pallet loader), 4 loading carriages including 30 mm mandrels, measuring probe, grinding device with oil cooling, additional coolant cleaning system, automatic fire extinguishing system, automatic central lubrication system, extraction for oil and emulsion mist, alphanumeric keyboard, machine light, DES 300 data entry station for recording technical data of the circular saw blades including keyboard, monitor, and mouse, oil drip tray with floor grid, 2 grinding wheel holders, 1 saw blade magnet holder. Circular saw blade diameter without robot: 80-840 mm Circular saw blade diameter with robot: 100 - 630 mm Circular saw bore diameter: with robot from 10 -180 mm Sheet thickness without robot: up to 14 mm Sheet thickness with robot: up to 5 mm Tooth pitch: 6 - 120 mm rake angle: -35° to +40° Bevel grinding on the tooth back: up to 45 ° clearance angle: 5° - 45° Bevel grinding on the negative tooth face: up to 30° Working speed for breast and back grinding: up to 12 teeth/min., Machine dimensions L x W x H =: 2316 x 1860 x 2058 mm weight machine: 3000 kg Loader weight: 1400 kg Ijdpfxsxfg Dwo Afpeih Grinding path and grinding speed per machining surface on the tooth: infinitely adjustable Dimensions loader L x W x H =: 3840 x 2020 x 2000 mm Connected load approx.: 4.4 kW (400 V / 50 Hz) colour: telegrey RAL 7045/7047

Condition: excellent (used), Godina proizvodnje : 2006 Iiedoxdwizopfx Afpjh

Condition: excellent (used), Year of construction: 2014, Manufacturer: Henrik WINTER HOLZTECHNIK GmbH (Leipzig, Germany) Model / type: SAWMAX 600 Iijdpfx Afow R E Sljpeh Year of manufacture: 2014 Serial number: 130705-28 Power supply: 3×400 V, 50 Hz Maximum power: 1.69 kW Weight: 650 kg Certificate: CE

Condition: used, Year of construction: 2004, Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels. Accessories: Total enclosure, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511, Device for automatic chamfering of sawblades from Ø 145 mm, Automatic threading of the grinding wheel, Automatic fire extinguishing system, Automatic central lubrication, Coolant system 400 L with coolant tank with filter system, Iiedpfxjw I Sk Ns Afpeh Machine lamp, Oil collecting tray, 3 sawblade mandrels (loader). Saw diameter: 40-710mm Tooth pitch: 1 - 55mm Number of teeth: 2 - 998 Saw blade thickness: max. 8 mm Grinding wheel diameter: 200x32mm Connected load: 10kW (400V / 50Hz) mass: about 3200 kg Dimensions: L x W x H = 1198 x 1750 x 2015 mm colour: blue/grey RAL 7047 / blue RAL 250-50-20.

Condition: used, Year of construction: 2016, Suitable for automatically grinding chip breaker grooves in HSS and segmented circular saws. Accessories: Control system for automatic offset of grinding spindle, Iedew I Ezuepfx Afpjih coolant system, stepless adjustable working rate, machine light. 1 sawblade mount. Circular saw blade diameter: 165 - 630 mm Tooth pitch: 3 - 50 mm Saw blade thickness: 2 - 6 mm Working speed: continuously adjustable from 24 - 50 z/min. Grinding wheel diameter: 25 and 30 mm Grinding wheel width: 0.3/0.4 and 0.5 mm Connected load approx.: 0.4 kW (400 V / 50 Hz) Weight approx.: 210 kg Dimensions W x D x H approx.: 1020 x 900 x 1620 mm colour: light grey RAL 7047

Condition: used, Year of construction: 1977, functionality: fully functional, Saw blade sharpening machine Schmidt ASG 500 A Iodpswwky Asfx Afpsih - Good used condition - Year of manufacture 1977

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 86731, saw blade diameter: 760 mm, tooth pitch: 25 mm, grinding wheel diameter: 200 mm, saw blade width: 8 mm, grinding wheel width: 32 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid commits you to collect the machine on time between 28.07.2025 and 31.07.2025. TECHNICAL SPECIFICATIONS Saw blade diameter: 140 – 760 mm Saw blade tooth pitch: 1 – 25 mm Ijdpfx Afjwvi S Uopjih Number of teeth: 2 – 998 Saw blade thickness: up to 8 mm Grinding wheel dimensions: 200 x 32 mm MACHINE DETAILS Overall width: 1,500 mm Overall length: 1,500 mm Overall height: 2,000 mm Total weight: 1,500 kg Voltage: 400 V Frequency: 50 Hz Rated power: 8 kVA Current consumption: 16 A

Condition: used, Year of construction: 1974, Technical details: Iisdpfx Afewqplkspoh total power requirement: 1,65 kW weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! for sale as spare part dispenser! *

Condition: used, Year of construction: 2009, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light saw diameter: 80-840 mm Bore diameter: from 10 mm Ijdpfowp Efdsx Afpoih sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Cutting length:

Condition: used, Year of construction: 2010, Suitable for automatic grinding of tooth faces, tooth backs, and bases on carbide-tipped circular saw blades in a single setup. All common tooth geometries (flat, alternate, trapezoidal, etc.) can be ground automatically and in a single pass. Accessories: Full enclosure Measuring probe Grinding device with oil cooling Automatic fire extinguishing system Grinding mist extraction system N 183 Alphanumeric keypad Oil drip tray Machine light saw diameter: 80-840 mm Bore diameter: from 10 mm sheet thickness: < 8 mm Tooth pitch: 6 - 120 mm Cutting length: Iedpfjwp Eblex Afpoih

Condition: used, Year of construction: 1997, Suitable for automatic grinding of the tooth geometry on chip and flank faces (front and back) of HM - tipped circular saw blades. All common tooth shapes can be finish-ground in one cycle (also trapezoidal flat tooth). Accessories: Total enclosure, Motorized chip and clearance angle adjustment Manual central lubrication Coolant grinding system, Iedpswnpi Djfx Afpoih 1 arbor, 2 magnetic sawblade holders, 4 centering sleeves, 1 grinding wheel holder. Circular saw blade diameter: 80-810mm Circular Saw Bore Diameter: from 10 mm blade thickness: up to 5 mm Tooth pitch: 7-100mm rake angle: - 20° to +40° clearance angle: 6° to 45° tooth height difference: any Bevel cut on the back of the tooth: up to 45 ° Working speed: up to 20 teeth / min. Bevel cut on the tooth face: up to 15° grinding path max.: 20 mm Grinding wheel bore diameter: 32 mm Grinding wheel diameter: 125 mm Connected load: 1.6kW (400V / 50Hz) Weight approx.: 650 kg Dimensions W x D x H =: 1860 x 1010 x 1970 mm colour: turquoise RAL 5018 / gray RAL 7035

Condition: used, Year of construction: 2003, Suitable for manual grinding of tooth flanks on carbide-tipped circular saw blades. Accessories: Coolant system, Iedpfxswmm N Ss Afpeih Machine light, Under cabinet. Circular saw blade diameter: 80 - 700mm Circular Saw Bore Diameter: 10-105mm Tooth pitch: from 8 mm rake angle: 0° to 30° tangential relief angle: 0 - 5° radial relief angle: 0 -3° grinding path: up to 15 mm Grinding wheel diameter: 100 mm Grinding wheel bore diameter: 32 mm Connected load approx.: 0.49kW (400V/50Hz) Weight approx.: 82 kg Dimensions W x D x H: 500 x 700 x 650 mm colour: Blue

Condition: refurbished (used), Year of construction: 2007, Technical Description Machine for producing or regrinding carbide saw blade flanks - Option to install a 3-pallet loader Diameter: 80 to 800 Iiodjwkdwuspfx Afpjh CNC: 840DI SIEMENS CNC axes: Siemens Simodrive 611 - Oil mist extraction - Automatic blade measurement and grinding wheel compensation - Variable spindle speed - Integrated measuring system - Integrated modem for remote diagnostics and user assistance - Stable, vibration-reducing cast iron construction - Highly user-friendly and easy to program thanks to a new Windows-based user interface/system SOLD WITH 3-PALLET LOADER Options: Profile editor: Allows you to quickly and easily generate any tooth flank shape The machine will be completely rebuilt upon receipt of the order. Approximately 3-4 months

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Bandsaw grinding machine Iodswd N Daepfx Afpoih Risstaler riv Rivo 200 GA Year of manufacture 1984 Various tooth shapes available Operating instructions included Feed rate 30 or 60 teeth per minute

Condition: new, Year of construction: 2025, functionality: fully functional, 📌 BAS 100 (STA) - Swaging machine for band and gang saws, automatically hydraulically controlled Iiedpfx Afev Tqzyepoh Saw tooth swaging is another method, alongside setting, to ensure the saw blade's free cutting action during stock removal. During the swaging process, a swaging bolt is positioned in front of the saw tooth while the tooth is held against an anvil. The rotation of the eccentric swaging bolt shifts the saw blade material toward the tooth tip. Once the swaging process is complete, the swaging bolt automatically returns to its original position.

Condition: new, Year of construction: 2026, functionality: fully functional, Automatic Sharpening Machine for Frame Saws – GAP 100 (Machine available from January 2026) Iiodpov Tl Arsfx Afpoh The automatic profile grinding machine GAP 100 has been specially developed for the precise sharpening of frame saws. Its compact and highly robust design guarantees a long service life and maximum reliability in daily operation. Equipped with advanced technology and an easy-to-use control system, the GAP 100 offers high functionality – both for standard applications and for demanding grinding tasks. An excellent price-performance ratio, minimal maintenance requirements, and intuitive operation make this machine the ideal choice for sawmills that value quality, efficiency, and cost-effectiveness. The GAP 100 consistently delivers precise grinding results, reduces your operating costs, and sustainably increases your productivity.

Condition: new, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, Automatic Grinding Machine for Band Saws – ISELI BAP110 Iiedpfxsv Tltdj Afpeh The ISELI BAP110 is a state-of-the-art, fully automatic grinding machine for band saw blades, engineered to meet the highest standards in precision, efficiency, and operator convenience. Thanks to its automated grinding process, the BAP110 ensures consistent, high-quality processing of saw teeth with minimal manpower required. 🔹 Fully automatic operation 🔹 Precisely adjustable tooth shape and pitch 🔹 Flexible use for various band saw blades 🔹 Intuitive controls with a user-friendly interface This machine is particularly suitable for sawmills and grinding workshops that value consistently high cutting quality and optimized throughput times.

Condition: used, Year of construction: 2013, Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring. Circular saw blade diameter: 200 - 840mm Circular Saw Bore Diameter: from 16 mm Tooth pitch: 6 - 180mm grinding path: up to 25 mm tangential relief angle: 0 to 10 degrees Iijdpfx Ajv Sbmqjfpoh max. grinding wheel diameter: 125 mm Grinding wheel bore diameter: 32 mm Grinding spindle variable: 1600 - 5500 rpm, Connected load approx.: 8kVA (400V / 50Hz) Dimensions W x D x H =: 2770x1900x2045mm mass: approx. 4700 kg colour: Gray

Condition: used, Year of construction: 1998, Suitable for automatic grinding of tooth face and tooth back on carbide-tipped circular saw blades in one clamping. All known tooth geometries (flat, alternating, trapezoidal, etc.) can be machined automatically and in one run be sanded. Accessories: Total enclosure Sawblade positioning device, Automatic central lubrication, Coolant system, Extractor, Halogen lamp, 1 sawblade mounting bolt including magnetic flange. Circular saw blade diameter without robot: 100-840mm Circular saw blade diameter with robot: 100 - 630mm Circular Saw Bore Diameter: 10 - 220 mm Sheet thickness without robots: up to 14 mm Sheet thickness with robot: up to 5 mm Tooth pitch: 6 - 120mm rake angle: -30° to +40° clearance angle: 5° - 45° Bevel cut on the back of the tooth: up to 45 ° Bevel cut on the negative tooth face: up to 45 ° Working speed for front and back grinding: up to 12 teeth/min., Grinding path and grinding speed per machining surface on the tooth: infinitely adjustable Dimensions loader L x W x H =: 6500 x 1900 x 2000 mm Dimensions machine L x W x H =: 2450 x 2050 x 2060 mm Weight approx.: 3000 kg Weight machine: 3000 kg weight loader: 1850 Iodpfx Ajv Sayvefpeih Connected load approx.: 5.6kW (400V / 50Hz) colour: telegrey RAL 7045 weight machine: 2000 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 29 kg Iiedpfx Ajv A Hhhsfpeh Total power requirement 0,25 kw