Jenkinson Machinery

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Gbsdpfx Aoxld R Iofpou Type CX 1000 30 Capacity 30 ton Unloading 1000mm Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool

Condition: used, total length: 1,900 mm, total width: 950 mm, total height: 1,800 mm, Empty weight: 2.150 kg Price: On request - Maximum capacity (⌀ x thickness): 28 mm x 20 mm - Strokes per minute (at 20 mm stroke): 38 - Working height: 890 mm - Largest hole (optional): 38 mm - Max. bar bending: 250 x 12 mm - Max. sheet bending: 500 x 3 mm - Max. angle cutting (90°): 130 x 13 mm - Max. angle cutting (45°): 70 x 10 mm - Notching (material thickness): 10 mm - Documentation available: No - CE marking present: Yes - Control: Teach-in - Motor power: 7.5kW - Table width: 350mm - Throat depth: 355mm - Table length: 600mm - Ram length: 40mm Gbedpfx Afsxhcfpepsu - Model: Hydraulic - Max. stroke: 55mm - Power: 80.0ton - Transport dimensions: 1900mm x 950mm x 1800mm (l x w x h) - Transport weight [kg]: 2150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Gjdpfx Ajxf Utasfpebu Weight with tool: 370 kg Good condition

Condition: used, TÜNKERS Pneumatic Punching Unit Pneumatic punching yoke, punching press, punching unit Year of manufacture: 2019 Model No.: 141-1040F Yoke No.: B-13-26/100 Pressing force: 4 tons (40 kN at 8 bar) Air connection: max. 8 bar Throat depth: 100 mm Yoke width: 60 mm Hole diameter: Ø 2-13 mm Hole diameter (installed punch): Ø 4 mm Gsdpfx Afjxf Uqxspsbu Die diameter (outer): Ø 22 mm - Stripper via Vulkollan polyurethane elastomer Dimensions (L x W x H): 280 x 110 x 480 mm Weight: 36 kg Very good condition

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 1,000 h, machine/vehicle number: GRM80E, control type: CNC control, degree of automation: automatic, actuation type: mechanical, controller manufacturer: Otto Bihler, controller model: Otto Bihler, punching force: 30 t, stroke rate (min.): 99 1/min, stroke rate (max.): 120 1/min, sheet thickness (max.): 5 mm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, overall weight: 1,500 kg, Equipment: centralized greasing system, emergency stop, We Sanjit Moulds Private Limited have a Bihler Machine GRM80E. Its a wonderful machine with Multiple Slides. We have maintained the machine properly. The price mentioned is CIF Hamburg. This machine is located in India in Nashik which is very 180 Kms from Mumbai. Godexc Txcjpfx Afpjbu

Condition: used, Punching force: 300 kN For example, punch a 20 mm hole in 12 mm steel Stroke triggering via foot switch Gjdoxcndyopfx Afpsbu Assortment of tools is included in the price

Condition: used, Punching force: 350 kN For example, punch a 23 mm hole in 12 mm steel Gbodjxcnccepfx Afpsu Stroke triggering via foot switch Support table with folding cams Assortment of tools is included in the price

Condition: used, Punching Bracket, Punching Unit SUPRA-CLAP Type C12.300 Throat Depth: 300 mm Punching Capacity: 0.3 to 2 mm material thickness, depending on cutting clearance Hole Diameter: Ø 2 to Ø 12 mm Distance between lower die and punch holder: 8.5 mm Distance between upper and lower bracket: 13 mm Gbedpfxexbh Rde Afpeu Punch Shank Diameter: Ø 12 mm Cutting Plate Outer Diameter: Ø 30 mm Cutting Plate Thickness: 12 mm Drop-through Opening in Punching Bracket: 14.5 mm Installation Height: approx. 145 mm - Standard punch length 70 mm with 60° head (Punch per DIN 9861 Form C) - Punch holder with spring stripper and return spring - Mounting slot 50 x 13.5 mm and 8 mm locating pin Punching Bracket Dimensions (L x W x H): 390 x 36 x 145 mm Weight: 4 kg Good condition 9 units available, price per unit 3 units with tool inserts (punch + die) 6 units without tool inserts (without punch + without die)

Condition: used, Punching bracket, punching unit SUPRA-CLAP / CEWE Type PAE 50 - 400 3GN 3P1 Throat depth: 400 mm Punching capacity: max. 10 mm material thickness Hole diameter: max. Ø 50 mm Distance between upper and lower bracket: 19 mm Punch holder: Ø 78 mm Cutting plate outer diameter: Ø 78 mm Cutting plate thickness: 20 mm Drop-out opening in punching bracket: 52 mm Installation height: approx. 220 mm - Punch holder as a punch unit with punch mount and material stripper with disc springs Gedexbh N Tepfx Afpobu - Punch holder rotation-proof guided and spring-loaded - Punch length 97 mm, shank Ø 35 / 50 mm - Round hole tool: punch Ø 41 mm and die Ø 41.5 mm - Long fixing hole: 270 x 13.5 mm Dimensions of punching bracket (L x W x H): 550 x 95 x 220 mm Weight: 27.5 kg Good condition 4 units available, price per unit 3 units with Ø 41 mm punch tool 1 unit with Ø 43 mm punch tool

Condition: used, Punching bracket, punching unit SUPRA-CLAP type C7 300 Throat depth: 300 mm Punching capacity: max. 2 mm material thickness Hole diameter: Ø 2 to Ø 7 mm Distance between lower die and punch holder: 7 mm Distance between upper and lower bracket: 12 mm Punch shank: Ø 7 mm Die outer diameter: Ø 20 mm Die thickness: 12 mm Pass-through opening in punching bracket: 11 mm Installation height: 142 mm - Standard punch length 70 mm with 60° head - Equipped with a round hole punch approx. Ø3 to 4 mm - Punch holder with stripping spring and return spring Gsdpfxexbh N Ho Afpebu - Mounting slot 50 x 14 mm and 8 mm locating pin Dimensions punching bracket L x W x H: 390 x 26 x 145 mm Weight: 3.7 kg Good condition 13 pieces available, price per piece

Condition: used, pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l Gbodpfxjxaaipj Afpeu work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: new, punching pressure 28.0 t punching cross-cut in cmm 31 in 7.0 mm ST throat 250 mm Gbedow U U S Nopfx Afpsu dayligth 223 mm no. of strokes 10 - 30 Hub/min oil volume 32.0 ltr. work height max. 1033 mm total power requirement 3.0 kW weight of the machine ca. 553 kg dimensions of the machine ca. 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: used, Year of construction: 2000, pressure 16 t throat 350 mm stroke 25 mm no. of strokes 200 - 1000 /min distance table/ram, max. stroke up, adjustment up 230 mm table surface area 480 x 280 mm Table height above floor 1050 mm ram surface 200 x 110 mm ram adjustment 25 mm diameter of blanks - 1800 mm no. of flutes 16 - 460 material thickness 2,0 mm distance between mid parts spindle and mid ram 160 - 680 mm Gbjdpfx Afsw U Ekvspju power requirement 6,0 kW Weight 5,60 t dimensions of the machine (WxDxH) 1,4 x 2,9 x 2,4 m year of manufacture 1971 - new control 2000 with infinitely variable AC-drive, pneumatic clutch (Ortlinghaus), manual ram adjustment, electro-pneumatic blank clamping, automatic stripping device, intermittent control (ram lifting for idle stroke), fully automated centralized oil lubrication, two-hand operation, electrical control Siemens S 7 (yom 2000) various change wheels

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Gbedpow Trkgofx Afpou Exact details can be found in the PDF.

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Exact details can be found in the PDF. Gbodpfx Aow Tri Nefpju

Condition: used, total length: 1,800 mm, total width: 1,000 mm, total height: 2,000 mm, Empty weight: 2.000 kg Price: On request Thickness 45 mm Maximum pressure 70 tons Punch cutting machine Model: Hydraulic Manufacturer: GEKA Type: Hydracrop 70S Gjdpfxow Ryxme Afpobu Power: 70 tons Cutting round: 45mm Cutting beam: 45mm Cutting plate: 450x15mm Cutting corners: 250x6mm Incl. multiple punches Machine-afmetingen: 1800x1000x2000mm Machine weight: 2000kg - Documentation available: No - Power: 70.0ton - Transport dimensions: 1800mm x 1000mm x 2000mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: unexamined, Year of construction: 2024, machine/vehicle number: 16.41-PS0382, control type: CNC control, degree of automation: automatic, actuation type: electric, sheet thickness (max.): 8 mm, input voltage: 400 V, input current: 20 A, type of input current: three-phase, 2024 Pima Power PS 1225 Brand new Complete machine. Machine was tipped on its side during transit and was damaged. Gjdpew Nbh Hofx Afpjbu Machine is stored in Our warehouse in California USA. Contact to set up in person inspection.

Condition: used, Year of construction: 2001, Combined punching machine with shear and automatic loading/unloading system – FINN-POWER SG + TRS6FB _____ Brand: FINN-POWER Model: SG + TRS6FB Year of manufacture: 2001 Machine weight: 22,000 kg Punching force: 300 kN Shearing force: 250 kN Max. working pressure: 300 bar Description: CNC combination punching machine + corner shear, complete with: • automatic loading system with sheet metal storage Gbedpfx Asw Iflmefpsu • CNC rotary turret • integrated corner shear • conveyor belts for unloading • soundproof cabin and safety guards • dedicated Finn-Power CNC The machine is currently installed and can be inspected by appointment. Condition: • Immediately available 📍 Location: Italy _____

Condition: excellent (used), Year of construction: 2008, Amada EMK 3510NT electric punch, 45 Station Turret with 4 Auto indexing units 2008 Year of manufacture Country of Manufacture: Japan Bridge Type 30 tonnes (196kN) High speed AC servo direct twin drive 1270 x 2500mm 1270 x 5000mm ( ONE REPOSITION) 34.5 mm mild steel 150Kg max sheet weight mm 58 Stations Turret Gbjdpsw Dc Dyjfx Afpsu Turret Stations: 36 x A (Max. Dia. 12.7mm) 12 x B (Max. Dia. 31.7mm) 4 x C (Max. Dia. 50.8mm) 2 x D (Max. Dia. 88.9mm) Auto Indexing Stations 2 x B (Max Dia 31.7mm) 2 x E (Max. Dia. 114.3mm)

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 4203773681008, table length: 1,400 mm, table width: 600 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the machine within the specified period from 28/07/2025 to 31/07/2025. TECHNICAL DETAILS Table dimensions: 1,400 x 600 mm Motor: 11.4 kW MACHINE SPECIFICATIONS Overall width: 2,500 mm Overall length: 2,200 mm Overall height: 2,000 mm Total weight: 1,500 kg Operating voltage: 380 V Frequency: 50 Hz Rated current: 25 A Control voltage: 220 V with transformer Auxiliary voltage: 24 V Breaker rated short-circuit current: 0.165 kA Documents and Numbers Control number: 42037.301.01.00 Wiring diagram: 42037.301.01.01 Gedpfjwvi N Tjx Afpobu Serial number: 42037.736.81.008

Condition: used, Year of construction: 2017, total length: 1,500 mm, total width: 900 mm, total height: 1,700 mm, Empty weight: 1.400 kg Price: On request Steel round: 40mm Steel flat: 200x20mm / 300x15mm Notching + Punching + cutting - Year: 2017 - Documentation available: Yes - CE marking present: Yes - Serial number: 155976 - Control: Conventional - Motor power: 4.0kW - Model: Hydraulic - Power: 60.0ton - Transport dimensions: 1500mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Gbjdpfxowraaze Afpeu VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1995, Specification: Model: Indumasch Year of manufacture: 1995 For metal up to: 6 mm Other: foot pedal, interchangeable dies Godpfx Aowql S Hjfpjbu If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2011, Equipment: type plate available, CNC turret punching machine Amada type AE2510NT, Year of manufacture 2011, Control panel, Metal cabinet 200 cm, 2-door, red/black, Contents: machine accessories, Metal cabinet 120 cm, 2-door, red/black, Contents: small tools, Punching capacity 200 KN, Turret with 51 stations, Max. material size 1270x5000 mm, X-axis travel 2500 mm, Y-axis travel 1270 mm, Gbjdswpgvwopfx Afpju

Condition: good (used), NOVOPRESS - Punching Machine -incl. 3 punching tools -Separate hydraulics with foot switch including trolley -Length measuring system -Protection grid Gbsdown Tgmspfx Afpsu Dimensions: LxWxH 1.7x1.2x1.7 meters / Weight 700kg Errors and input mistakes excepted.

Condition: used, total length: 2,200 mm, total width: 1,000 mm, total height: 2,000 mm, Empty weight: 3.000 kg Price: On request Iron worker, punch press and section shear  Model: Hydraulic Manufacturer: GEKA Type: Hydracrop 70/SD Capacity: 70 ton Gbedpfxewnhi Ne Afpju Schear round: 45mm Schear beam: 45mm Schear plat: 450x15mm Notching: 250x6mm Incl. multiple punches Machine-afmetingen: 2200x1000x2000mm Machine-weight: 3000kg - Documentation available: No - Transport dimensions: 2200mm x 1000mm x 2000mm (l x w x h) - Transport weight [kg]: 3000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum