müga Werkzeugmaschinen GmbH & Co. KG

Condition: good (used), Year of construction: 2022, spindle speed (min.): 12,000 rpm, Machine type: CNC-BAZ vertical Model: M1 Pro with 4th axis including tailstock Manufacturer: DMGMORI Control: Siemens 828 D Year of manufacture: 2022 Location: Germany Technical data Travel range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Max. workpiece weight approx. 600 kg Max. speed approx. 12,000 rpm Spindle motor approx. 13/9 KW Number of tool positions approx. 24 Rapid traverse X / Y / Z approx. 24 m/min Holder taper approx. SK40 Ledpfoxyt S Dox Afloai Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg Equipment Main spindle 12,000 rpm 13/9 kW - Separate electronic handwheel - 24-place chain magazine - SK40 - Coolant tank - IKZ pump 20 bar - Filter for coolant - Bed flushing switchable via M function - Coolant spray gun - Spindle blowing air switchable via M function - Cabin roof - Measuring probe - 4th axis (Errors in the technical data and information excepted)

Condition: excellent (used), Year of construction: 2022, DMG MORI CMX 50 U 3+2 Lsdpfxexyi Hws Afloai Year 2022 Control: Siemens SlimLine Travels: X-500 mm Y-450 mm Z-400 mm B -5 / +110 ° C 360 ° Spindle max. 15,000 rpm Tool magazine for 60 tools BBT40 Through-spindle coolant 70 Bar Chip conveyor Filter paper High-pressure coolant pumps Workpiece probe, tool probe Quickset (rotary axis calibration) Machine in very good condition, available end of December.

Condition: used, Year of construction: 2010, x-travel 508 mm y-travel 356 mm z-travel 508 mm table dimensions 508 x 324 mm spindle tunring speed 10.000 U/min Tool cone CAT 40 spindle drive 15 kW tool magazine 24 Stationen rapid traverse 25,4 m/min feed 18,03 m/min weight 6,5 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Operating hours approx. 20,851 hours Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. Ljdpfx Afexyafwsleai subject to prior sale

Condition: good (used), Year of construction: 1996, Details X-axis travel: 400 mm Y-axis travel: 300 mm Z-axis travel: 400 mm Table clamping surface: 500 x 300 mm Max. workpiece weight: 100 kg Rapid traverse – longitudinal/cross/vertical: 30 m/min Spindle taper: ISO 40 Speeds: steplessly adjustable 50 – 8000 rpm Tool magazine with 16 positions Control: TRAUB M X 8 F Feed rates: 12 mm/min Total power requirement: 5.5 kVA Machine weight approx.: 3,000 kg Space requirement approx.: 2.5 x 2 x 2.2 m Control system: CNC Lodpfx Aexx Rz Hefleai

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 24.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30.000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY Laedpfx Aoxx Dacoflei - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2325 [mm] - Machine weight : 2200 [kg] EQUIPMENT - CNC : Fanuc 31i-Model B5 - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : LEHMANN * model : Serie 500 - Coolant tank * with high-pressure pump : 70 [bars] - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : HEXAGON - Workpiece probe : HEXAGON - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer - Chuck 3 jaws : SCHUNK

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 24.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30.000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2325 [mm] - Machine weight : 2200 [kg] EQUIPMENT - CNC : Fanuc 31i-Model B5 - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : LEHMANN Lsdpfx Afjxx A U Ssljai * model : Serie 500 - Coolant tank * with high-pressure pump : 70 [bars] - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : HEXAGON - Workpiece probe : HEXAGON - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer - Chuck 3 jaws : SCHUNK

Condition: used, Year of construction: 2005, A 2005 Built The Dah Lih MCV 720 Fanuc controlled VMC in lovely condition, super clean and well maintained…fitted with rsar exiting swarf auger & mist extractor Make: Dah Lih Model: MCV 720 Ledpfx Aoxxv E Rsfloai YOM 2005 Control Fanuc Series 0i Table Size (L x W) 950 mm x 560 mm (approx. 37.4 x 22.05 in) Axis Travel (X/Y/Z) 720 mm / 460 mm / 510 mm (approx. 28.3 / 18.1 / 20.1 in) Max. Table Load 500 kg (approx. 1100 lbs) Spindle Taper BT 40 Spindle Speed 8,000 RPM Spindle Motor Power 11 kW (15 hp) Automatic Tool Changer 24 Tool Side Mount Machine Weight Approx. 4400 kg (approx. 9680 lbs) Control: Fanuc 0iM Spec: Travel X720 Y460 Z510 mm | 8000RPM | BT40 Accessories: Mist Extractor, swarf auger

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: P082WG406, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel distances Ledpfx Afoxxvi Ajljai X-axis: 500 mm Y-axis: 400 mm Z-axis: 330 mm Spindle speed: max. 10,000 rpm Rapid traverse (axes): max. 54 m/min Table & Loads Permissible table load: 300 kg Maximum tool weight: max. 2 kg Maximum total tool weight: max. 23 kg Tool dimensions Overall length: 200 mm Shank length: 120 mm Tool diameter: 80 mm Maximum height: 440 mm MACHINE DETAILS Weight: 2,100 kg Mains supply: 3-phase Power rating: 11 kVA

Condition: used, Year of construction: 2004, Immediately available ex location: CNC Vertical Machining Center HAAS Type: Super Mini Mill Year of manufacture: 2004 Haas control Table size: 914 x 305 mm Table load capacity: 227 kg Travel X/Y/Z: 406/356/381 mm Rapid traverse X/Y/Z: 15 m/min Spindle speeds up to 8000 rpm 10-station tool changer Weight: 2 t Accessories Ljdpfx Afsxxu R Ssleai Offered at a price of EUR 7,000—plus VAT, ex location

Condition: like new (used), FANUC ROBODRILL α-D21SiB5, 4th axis Lajdpfjxxkzajx Afloi

Condition: ready for operation (used), Year of construction: 2014, Movement X-Axis Movement 560 mm Z-Axis Movement 450 mm Y-Axis Movement 410 mm Main Drive Number of axis 3 Spindle Speed 12000 RPM This 3-axis YCM NXV560A was manufactured in 2014. It features a direct-drive spindle with a speed of 12,000 rpm, a 28-station arm-type tool changer, and a belt-type chip conveyor. The CNC control is iTNC530 HSCI, and it has XYZ travels of 560, 410, and 450 mm respectively. Consider the opportunity to buy this YCM NXV560A vertical machining center. Contact us for more information. Application Types Lodpfoxxdquox Aflsai Milling

Condition: good (used), Year of construction: 2007, Fanuc Robodrill T 21 iF, year of manufacture 2007, Fanuc 31 i A5 control, travel X/Y/Z 500/400/300 mm, spindle speed up to 24,000 rpm, 16-position tool changer, BT - AD 30 interface, accessories, 12,500 spindle hours, spindle replaced in 2016, Renishaw contact tool probe. Lajdexwt Rzepfx Afloi

Condition: good (used), Year of construction: 2010, operating hours: 78,572 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 500,000 m/min, feed rate Y-axis: 50,000 m/min, feed rate Z-axis: 50,000 m/min, overall weight: 12,000 kg, Special Equipment of the Machine 1. Extension of the tool magazine from the standard 30 tools to 210 tools, incl. preparation for 240 1. Pallet round storage for 10 pallets, incl. setup station, Number of pallets: 10, Pallet size: D 130 mm, Pallet interface: Capto C6 Max. workpiece size: D 250 x H 250 mm Max. workpiece weight: 40 kg Pallet clamping force: 22.5 kN 1. HSC main spindle 40 – 20,000 rpm with 7.5/11 kW motor, Max. spindle torque: 70 Nm up to 1,500 rpm, Including weekly timer for starting the warm-up cycle and automatic machine shutdown 1. Spindle interface HSK 63A 1. Direct travel measuring system (Heidenhain) on X, Y, and Z axes, supplied with purge air 1. KNOLL coolant system, consisting of: - Scraper belt chip conveyor with lift pump and chip discharge to operator side - Through-spindle coolant supply with KTS25-50T coolant pump, 24 l/min at 70 bar, 5.5 kW Coolant pressure switchable in 3 stages - External cooling with coolant pump, 100 l/min at 1.4 bar - Coolant shower with coolant pump, 100 l/min at 1.4 bar - Compact filter KF200, filter capacity 200 l/min Overall unit dimensions (L x W x H): approx. 1.8 x 1.1 x 1.0 m Tank volume: approx. 1,400 liters 1. Cooling water recooler VWK 90 – D emulsion Cooling capacity: 11.5 kW Ambient temperature up to 42°C Refrigerant: R407c 1. Coolant spray gun in the working area including pump and electrical installation 2. Spiral chip conveyors 1. TEBARON mechanical air filter TEB/BV2 for extraction of emulsion, oil mist, and smoke, consisting of: - 3-stage prefilter pack - HEPA filter according to DIN EN 603335-2-69 with BIA test certificate, separation efficiency > 99.995% for particles ≥ 0.3μ. - Fulfills requirements for application categories K1/K2 (carcinogenic substances and pathogens) as well as dust class H. 1. Single support with base plate for ISI air filter TEB/BV2 1. RENISHAW OMP 60 probe for automatic zero point setting and workpiece measurement, can be changed into the spindle via tool changer: Including EASY PROBE SOFTWARE Pressure sensor for tool length measurement and tool breakage monitoring Special accessories for the control system 1. Increase in workpiece coordinate systems from 6 to 54 1. Coordinate system rotation G68/G69 Ledpfexwm Adsx Afloai 1. Chamfering and rounding corners 1. Automatic zero point tracking 1. Contour re-approach 1. Extension of macro variables from standard 100–149, 500–549 to 100–199, 500–999 1. IZ2/150NF HSC precision control for simultaneous 5-axis machining, consisting of: - Fast Data Server function - High-Speed Precision Contour Control - Nano Smoothing - Dynamic zero point tracking (up to 8 different zero points available, G54.2) - TCPC (Tool Center Point Control) for 5-axis simultaneous milling (G43.4/G49) - Swivel cycle enables machining on an inclined working plane (G68.2/G53.1/G69)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A04B-0105-B133#BBH, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 10,000 rpm, rapid traverse X-axis: 54 m/min, rapid traverse Y-axis: 54 m/min, rapid traverse Z-axis: 54 m/min, table width: 850 mm, table length: 410 mm, type of input current: three-phase, table load: 300 kg, overall weight: 2,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, We have 2x Fanuc Robodrill a-D21MiB5 plus units that we no longer use. They are too lightweight for our intended applications. We prefer to make someone else happy with the machines. Some specs below: • Year of manufacture: 2022-03 and 2022-06 • Large chip tray (non-standard) • High-pressure pump for through-spindle coolant (non-standard) • Extraction unit Ledpfx Asxwiglofloai • Low operating hours • Always serviced by Humacs Krabbendam • Dataserver in both machines (FTP accessible) (non-standard) • All toolholders as shown in the photo • Fanuc program transfer tool (software) • Manuals Note: We have moved the Renishaw probes to our other machines. The listed price is per unit.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 100 h, Movement Lajdpfx Ajxwfmhsfloi X-Axis Movement 508 mm Y-Axis Movement 305 mm Z-Axis Movement 406 mm Additional Equipment CT-style tool changer grippers / Standard program memory, 1GB / Spindle speed: 6000 rpm / Convenience Package / Early power failure detection module / Ethernet interface / HaasConnect: Remote monitoring / HaasDrop / Lifting device / User-definable macros / M-code for media playback; M130 / Run in safe mode / Standard 1-year warranty / Tool changer with 10-position carousel / Touchscreen control / Visual part programming system / Wi-Fi connection for the Haas control / Work light / Spindle orientation / Coordinate rotation and scaling / Internal high-voltage non-isolated transformer for 380-480V operation; Non-USA WIPS-R Wireless Intuitive Probe System / AAG Automatic Air Cooling System+ / AUGER Auger Chip Conveyor / AUTO LUBE Automatic Lubrication System / CPH-HF High-Flow Coolant Pump / MIN QTY LUBE Minimum Oil Lubrication System+ / P-COOL Programmable Coolant Nozzle+ / PULSEJET PulseJet System+ / RJH-TOUCH-XL Large Jog Handle with Remote Control and Touchscreen Display+ / RTAP-3 Synchronized Tapping+ / FIO Installation Field Installed Options with+ This 3-axis HAAS TM-0P was manufactured in 2022. It features a 508 mm X-axis, 305 mm Y-axis, and 406 mm Z-axis travel, ensuring versatile machining capabilities. Standard features include a 6000 rpm spindle, 10-position carousel tool changer, and touchscreen control. Additional accessories like the Wireless Intuitive Probe System and Auger Chip Conveyor enhance its functionality. If you are looking to get high-quality milling capabilities consider the HAAS TM-0P machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2001, x-travel 550 mm y-travel 500 mm z-travel 400 mm Control Siemens spindle tunring speed 12.000 U/min table surface area 1050 x 450 mm table load 500 kg weight approx. 6220 kg Laodpfxoxwdwxs Aflji In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 655050, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 500 kg, spindle speed (max.): 42,000 rpm, TECHNICAL DETAILS Travel paths Travel X-axis: 550 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Rapid traverse (X/Y/Z): 60 m/min Spindle Speed: max. 42,000 rpm Tool system Tool holder: HSK 40 E Tool positions: 32 Table Table size: 650 mm × 500 mm Table load: max. 500 kg MACHINE DETAILS Drive power: 15 / 17 kW Control: Andronic 2060 Dimensions & weight Required space (L×W×H): 2.58 m × 1.9 m × 2.26 m Machine weight: 7,200 kg Lasdpfx Afoxwc Hrolsi EQUIPMENT Measuring probe Electronic handwheel Erowa zero-point clamping system

Condition: used, Year of construction: 2005, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 560 mm, - Manufacturer: Matsuura - Fanuc 31i with Manual Guide - Model: V-plus 550 - Year of manufacture: 2005 - X-axis: 550.0 mm - Y-axis: 410.0 mm Laodsxwbqcepfx Aflsi - Z-axis: 560.0 mm - Table length: 870.0 mm - Table width: 400.0 mm - Max. workpiece weight: 400.0 kg - Tool magazine capacity: 30 positions for BT40 - Max. spindle speed: 15,000 rpm - Through-spindle coolant - Marposs laser probe - Machine documentation

Condition: good (used), High-speed machining centre Brother TC-S2A Year of manufacture: 1999 Serial No.: 111177 Spindle hours: 9,705 h Power-on hours: 36,375 h Table: 850 x 450 mm Travel X / Y / Z: 500 / 450 / 410 mm Table load capacity: 300 kg Spindle taper: BT30 Spindle speeds: 12 – 10,000 rpm Tool changer: 14 stations Lodpfx Afsxv R I Ujljai Feedrate X/Y: 1 – 10,000 mm/min Feedrate Z: 1 – 20,000 mm/min Rapid traverse X/Y: 36 m/min Rapid traverse Z: 50 m/min The zero-point clamping system is not included in the sale The machine is fully operational and ready for immediate use.

Condition: good (used), High-Speed Machining Center Brother TC-S2A Year of manufacture: 1999 Serial No.: 111177 Spindle hours: 9,201 h Power-on hours: 26,077 h Table: 850 x 450 mm Travel range X / Y / Z: 500 / 450 / 410 mm Table load: 300 kg Spindle taper: BT30 Spindle speed: 12 – 10,000 rpm Tool changer: 14 positions Feed rate X/Y: 1 – 10,000 mm/min Feed rate Z: 1 – 20,000 mm/min Rapid traverse X/Y: 36 m/min Rapid traverse Z: 50 m/min The zero-point clamping system is not included in the sale. Lajdpexv R H Defx Aflji The machine is in fully functional and immediately operational condition.

Condition: good (used), High-Speed Machining Center Brother TC-S2A Year of manufacture: 1999 Serial number: 111177 Spindle hours: 15,923 h Power-on hours: 44,781 h Table: 850 x 450 mm Travel (X / Y / Z): 500 / 450 / 410 mm Table load capacity: 300 kg Spindle taper: BT30 Spindle speeds: 12 – 10,000 rpm Tool changer: 14 positions Feed rate X/Y: 1 – 10,000 mm/min Ljdpjxv R Hkjfx Aflsai Feed rate Z: 1 – 20,000 mm/min Rapid traverse X/Y: 36 m/min Rapid traverse Z: 50 m/min The zero-point clamping system is not included in the sale. The machine is in fully functional and immediately operational condition.

Condition: good (used), Year of construction: 2010, Matsuura MAM72-35V PC32 5 Axis Multi Pallet Loading Vertical Machining Centre With G-Tech 30i Control Lodpfx Afoxvz Tbelsai Maximum Component Dimension Ø350 x 240mm High. Maximum Pallet Load 60kg. Maximum Workpiece Dimension Ø350mm x 300mm High. Axis Travel 'X'=550mm, 'Y'=440mm, 'Z'=580mm, 'B'= +65/-125°, 'C'=360°. Rapid Traverse 'X,Y,Z'=60m/min, 'B'=50rpm, 'C'=100rpm. Maximum Maxia Spindle Speed 20,000rpm (11/15kW Motor). Spindle Taper BT40. 240 Position ATC. Maximum Tool Ø80mm (Ø150mm Non Adjacent Tool). Maximum Tool Length 260mm. Maximum Tool Weight 8kg. Tool Changing Time Tool to Tool 1.7sec. S/No. 18082 (2010). With Renishaw NC4 Laser Tool Measure and Breakage Detection Probe, Renishaw Spindle Inspection Probe interfaces, Auger To FSE Chip Conveyor, Filtermist FX4000 Mist Extraction Unit, SMC IDF8E Air Dryer, Daikin AKZ567 Oil Cooler, FSE Through Coolant System, Axis Scale Feedback, Visiport Spin Window, Signal Tower, Oil Skimmer, Wash Gun & Manuals. Note: Tooling Not Included. Note: Spindle Drive Needs Attention, Spindle Seems Free Running, Possibly Motor Needs Inspection.

Condition: good (used), High-speed machining center Brother TC-22A Year of manufacture: 2008 Serial number: 122085 Lasdpfx Asxvy Nzsflei Spindle run time: 4,694 h Operating hours: 16,191 h Table: 850 x 450 mm Travel X / Y / Z: 500 / 450 / 410 mm Table load capacity: 300 kg Spindle taper: HSK 40 Spindle speeds: 12 – 10,000 rpm Tool changer: 24 positions Feed X/Y: 1 – 10,000 mm/min. Feed Z: 1 – 20,000 mm/min. Rapid traverse X/Y: 36 m/min. Rapid traverse Z: 50 m/min. 4th axis by Lehmann The machine is in fully functional and immediately operational condition.

Condition: used, Year of construction: 2019, functionality: fully functional, OPTIMUM - OPTImill F 105 CNC Offer Details Stock number: 1039-8705 Machine type: Machining center - Vertical Manufacturer: OPTIMUM Ljdpjxvx Snofx Aflsai Model: OPTImill F 105 CNC Year of manufacture: 2019 Control: Sinumerik 808D adv. Siemens Location: D-59302 Oelde, Germany Country of origin: - Availability: immediately Delivery terms: ex works Additional information: CNC vertical machining center OPTIMUM - OPTImill F 105 CNC - DEMONSTRATION MACHINE Technical Details Travel X-axis: 550 mm Travel Y-axis: 305 mm Travel Z-axis: 460 mm Control: Sinumerik 808D adv. Siemens Main spindle: Speed range - main spindle: 10 – 10,000 rpm Drive power - main spindle: 11 / 7.5 kW Max. torque: 70 / 48 Nm Tool holder: BT 40 Worktable: Clamping area: 800 x 320 mm Max. table load: 300 kg T-slots: 3x 14 x 100 mm Distance spindle / table: 100 – 600 mm Tool changer: Number of tool stations: 12 positions Tool holder: BT 40 Max. tool diameter: 70 mm Max. tool weight: 6.0 kg Tool-to-tool change time: 7.0 sec Feedrates: Rapid traverse (X / Y / Z): 10 m/min Feed speed: up to 10,000 mm/min Repeatability: +/- 0.008 mm Positioning accuracy: +/- 0.01 mm Total power requirement: 15 kVA Machine weight approx.: 2.9 t Space requirements approx.: 3.5 x 2.5 x 2.4 m Included Accessories Documentation Chip conveyor system Coolant system Tool changer Probe: RENISHAW - Primo

Condition: ready for operation (used), Year of construction: 2003, General Data Measurements height 2540 mm Machine weight 2800 kg Control Unit Brand HEIDENHAIN Model TNC 310 Main Drive Spindle speed range 4500 Tool taper SK 40 Lasdjxuw Dmepfx Aflsi Number of axis 3 Movement X-Axis Movement 500 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm Table Table load 200 kg This 3-axis DECKEL MAHO DMU 50 M was manufactured in 2003. It features a Heidenhain TNC 310 control, electronic handwheel HR 150, and a main drive speed of 4,500 min-1. The machine offers a rapid traverse of 5 m/min and a working range of 500 x 400 x 400 mm. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMU 50 M machine we have for sale. Contact us for more information. Application Types Milling