Henan Victory Machinery

Condition: ready for operation (used), Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, in portal design with two tables and two 5-axis head units for alternating operation. Year of construction: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP components. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 1,500 mm Y-axis: 2,250 mm Z-axis: 650 mm, at 120 mm tool height Nledpszhbgfefx Aa Iec A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 traveling drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the base. 2 tables with aluminum table top 1,500 x 2,250 mm with grid drilling. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 manually operated sliding doors for front loading. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters, 1 partition wall (removable) between the tables. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, portal design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Movable control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed infinitely adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the top surface. Nljdpfxezhbbpe Aa Isc 2 tables with aluminum table top 3,000 x 1,500 mm with grid hole pattern. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 manually operated sliding doors for front loading. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 2005, 5-axis CNC machining center MAKA MM 7t, in gantry design with two tables and two 5-axis head units for alternating operation. Year of manufacture: 2005 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and -Ø 60 mm X-axis: 2 x 3,000 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm tool height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Njdpfezhabzjx Aa Ijlc Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 high-speed milling spindles HSD 10 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearing, water-cooled. Tool holder HSK-F63 with tool changer. 1 moving drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the base plane. 2 tables with aluminum table top 3,000 x 1,500 mm with grid drilling. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 2 minimum quantity lubrication systems with spray nozzles. Work safety: 2 sliding doors to be operated manually, for loading from the front. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Year of construction: 2006, condition: good (used), fuel type: electric, Golf car CLUBCAR PRECEDENT, 4-seater golf cart, 2006, with charger. A video can be sent via WhatsApp. We have a continuous supply; see our website. Prices are quoted ex-Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without guarantees (see our general terms and conditions). You can make an appointment for a viewing and/or test drive without any obligation. Please call in advance, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Nlodpfjzg Iycox Aa Ioc

Condition: used, Year of construction: 2004, 5-axis CNC machining center MAKA MM 7t, portal design with two tables and two 5-axis head units for alternating operation. Nlsdpjzg Imcsfx Aa Iec Year of manufacture: 2004 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components / deep-drawn parts / GRP parts. • Equipped with automatic central lubrication and control cabinet with air conditioning unit. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cube dimensions: with tool length 130 mm and diameter 60 mm X-axis: 2 x 2,000 mm Y-axis: 2,250 mm Z-axis: 480 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 2 x universal head for 5-axis milling with 90° head, 2 high-speed milling spindles HSD 7.5 kW (S1), HSK-F63 Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearings, water-cooled. Tool holder HSK-F63 with tool changer. 1 rotating drum tool magazine per head unit, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the base plane. 2 tables with aluminum table top 2,000 x 2,250 mm with grid hole pattern. To machine larger components, the tables can be coupled. 1 pneumatic clamping system per table. 1 vacuum clamping system per table. 1 minimum quantity lubrication system with spray nozzles per milling spindle. Work safety: 2 sliding doors to be operated manually, for loading from the front. In alternating operation, the loading and unloading area is secured with two electrically driven roller shutters, 1 partition wall (removable) between the tables. With protective cabin for the machine rear area, side access door, the cabin is open at the top. Current location: Southern Thuringia / Germany, where the machine can be inspected.

Condition: ready for operation (used), Year of construction: 2008, 5-axis CNC machining center MAKA MM 7t A, portal design with two tables for alternating operation. Year of manufacture: 2008 • High-performance CNC milling center for 5-axis machining, ideal for machining aluminum components. • Equipped with automatic central lubrication and control cabinet with air conditioning. • CNC control BWO 920, memory 8 MB, in the integrated PC. • Mobile control panel stand. Technical data: Working areas / cubic dimensions: Nlsdpfjzg H A Asx Aa Ijc with tool length 130 mm and diameter 60 mm X-axis: 2 x 1,500 mm Y-axis: 1,500 mm Z-axis: 650 mm, at 120 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 60 m/min. Z-axis: 24 m/min. A/B-axis: 10,000 °/min. 1 universal head for 5-axis milling with 50° tilting head, 1 high-speed milling spindle HSD 7.5 kW (S1), HSK-F63, Speed continuously adjustable from 2,000 – 24,000 rpm, Rated power from 12,000 rpm, with ceramic bearing, water-cooled. Tool holder HSK-F63 with tool changer. 1 traveling drum tool magazine per head, for 10 tools up to Ø 60 mm and – depending on the tool diameter – 130 mm length from the reference plane. 2 tables with aluminum table top 1,500 x 1,500 mm with grid holes. The tables can be coupled for machining larger components. Several pneumatic clamping circuits per table. 1 minimum quantity lubrication system with spray nozzles. Chip conveyor designed as a scraper conveyor. Work safety: 2 automatic lifting gates for front loading. In alternating operation with 1 partition (removable) between the tables. Safety bumper on the front edge of the table. With protective cabin for the rear of the machine, side access door, the cabin is partially closed at the top. Current location: southern Thuringia / Germany, where the machine can be inspected.

Condition: good (used), Siga Type: GS-517-400 External dimensions L x W x H: 4960 x 2500 x 2400 mm. The complete system is calibrated according to DAKKS standards and is therefore approved for tests relevant to type approval. Butane loading rate - Continuously adjustable from 5 g/h to 77 g/h Fuel loading rate - Continuously adjustable from 5 g/h to 100 g/h Nedozg Ex Nepfx Aa Ijlc Fuel temperature control - Continuously adjustable from 20°C to 50°C Gasoline quantity selectable - From 0 l to 8 l Selectable breakthrough criterion - From 1 g to 10 g Temperature of purge air flow - Continuously adjustable from 25°C to 30°C Precision scales for test specimen and reference AKF - Measuring range up to 6 kg, 0.1 g resolution Purge underpressure - Continuously adjustable from 0 hPa to 30 hPa Purge air flow - Continuously adjustable from 1 l/min to 60 l/min Humid purge air flow - Continuously adjustable from 10% RH to 85% RH Number of cycles from 1 to 999 (loading/purging) Condition: used Sale from our location! Scope of supply: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), TDK-Lambda Type: GEN10-240 TDK-Lambda GEN10-240 | Power supply, DC, 1 channel, 2U, 10V/240A, 2,400W, RS232, RS485 in a 19-inch enclosure Technical data: Manufacturer: TDK-LAMBDA Power supply type: Programmable laboratory power supply Display type: LED x2 Number of channels: 1 Output voltage: 0...10V DC Output current: 0...240A Max. power: 2.4kW Mounting: Rack 19" Output voltage resolution: 1.2mV Output current resolution: 28.8mA Voltage ripple and noise (regulated): ≤8Vrms, ≤60Vpp Input connector type: Terminal block Manufacturer series: GEN Operating temperature: 0...50°C Nlsdpfxozg Exvo Aa Iec Dimensions (width x height x depth): 423x43.6x432.8mm Parameter display: 4 digits Software: LabVIEW Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Henkel UVALOC 400 Loctite 97039 Curing Chamber The UVALOC 400 curing chamber (LOCTITE 97039) is a surface irradiation curing system developed for curing light-curing adhesives using UVA radiation and visible light. It is suitable for manual curing of individual parts during the manufacturing process as well as for laboratory use. The device integrates the following: a control unit with an integrated power switch and operating hour counter a lamp housing with the burner reflector igniter. Includes a UV protection box. Features: Contains a 400 W metal halide lamp Optimized for light emission in the UVA range Nlodozg Expepfx Aa Isc Typical curing area 10 x 19 cm Expected UV lamp life up to 1000 hours The power supply can be detached from the lamp module and operated separately Adjustable lamp height for optimal irradiation With a glass filter to prevent short-wave UVB/UVC emission Technical data: Mains connection 230 V AC ± 4%, 50 Hz Power consumption approx. 460 W Mains fuse 2 x 5 A, slow-blow Glass tube fuse 5 x 20 mm Warm-up time of the UV lamp 3 minutes Lamp type 400 W high-pressure metal vapor lamp with double-ended base Lamp life approx. 1000 hours Intensity See section 5.1 Dimensions (width x height x depth): 220 mm x 472 mm x 300 mm Ambient and operating temperature +10 °C ... +30 °C Storage temperature -10 °C ... +60 °C Weight ~ 11.5 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: not inspected (used), 1. Perform block clamping using a block clamp, manufacturer: Alfra, type: Compact, with attachment, in a case, plus 1 sheet metal punch, 36 x 91 mm, in a case. Nljdpfszg D Rwox Aa Ijc

Condition: not inspected (used), 1 item: Assembly frames, metal, dimensions: 1,500 x 1,500 mm, without contents, (12 pieces) Njdpfx Aaozg D Nao Islc

Condition: not inspected (used), 1 telescopic drawer cabinet, 9 drawers, complete with a stock of dowels, cable labels, adhesive tapes, Wargo clips, and hand tools. Nsdpfxszg D Hrs Aa Ijlc

Condition: not inspected (used), 1 telescopic drawer cabinet, 10 drawers, complete with a stock of bridge connectors, cable guides, adhesive labels, and clamps. Njdpfszg D Enjx Aa Ielc

Condition: not inspected (used), 1 telescopic drawer cabinet, 9 drawers, with an assortment of cable lugs, wire testers, and connecting cables. Nlsdozg D Dwopfx Aa Ioc

Condition: not inspected (used), Year of construction: 2022, machine/vehicle number: WBA61FZ080FN38551, 1 Combination sedan, manufacturer: BMW, model: M34d xDrive, (0005/CZJ), first registration: 10/04/2022, next inspection due, 250 kW hybrid diesel/electric, mileage: 146,591 km, color: gray, Euro emission standard: 6, Nodozg Duijpfx Aa Ielc chassis number: WBA61FZ080FN38551, official license plate: OF - WL 60, equipment: air conditioning, sunroof, radio, navigation system, heated seats, automatic transmission, electric seat adjustment, identifiable damages: mixed tires, winter tires on the front, summer tires on the rear.

Condition: not inspected (used), machine/vehicle number: WVWZZZAAZDD000641, Year of construction: 2012, Hatchback, manufacturer: Volkswagen, model: UP!, (0603/BGU), first registered: 07/12/2012, next inspection due, 44 kW, gasoline, mileage: 200,704 km, color: white, emission standard: 5, vehicle identification number: WVWZZZAAZDD000641, official license plate: OF - JW 1053, vehicle is deregistered. Equipment: Radio, navigation system, visible damage: Njdpfjzg Dp Hex Aa Iolc advertising lettering, parking dents due to age.

Condition: not inspected (used), machine/vehicle number: VF77JBHY6HN520997, Year of construction: 2017, 1. Combination car, manufacturer: Citroen, model: Berlingo, (3001/AVF), first registration: 08/01/2017, next inspection: 09/26, 73 kW diesel, mileage: 299,232 km, color: white, Euro emission standard: 6, vehicle identification number: VF77JBHY6HN520997, official registration number: OF - JW 453, vehicle is deregistered. Equipment: Radio, air conditioning, trailer hitch. Visible damage: Advertising lettering, parking dents due to age. Nlodpfx Ajzg Dm Eoa Ijc

Year of construction: 2021, condition: new, functionality: fully functional, machine/vehicle number: sn: 1100056463, This is a miniature Büchi B-290 spray dryer (Mini Spray Dryer), a high-quality piece of equipment suitable for various laboratory processes. It is a reliable and efficient tool for your laboratory experiments. This device is designed to provide consistent and accurate results with each use. Thanks to its excellent features, this spray dryer is ideal for the medical sector, laboratories, healthcare equipment and devices, the dental field, and industrial applications. Nsdpfx Aaezgw Tle Ielc It is a BÜCHI brand, model B-290 Mini Spray Dryer, serial number 100056463, year 2021; this equipment is NEW. Take advantage of this opportunity to acquire this exceptional tool and benefit from its practicality and performance.

Condition: used, functionality: fully functional, 🏗️ FOR SALE: ILMAR Rapide 1250 Block and Paving Machine (Used) Excellent opportunity to expand or modernize your precast concrete production with a domestically manufactured machine (ILMAR), recognized for its robustness, reliability, and low maintenance costs. The ILMAR Rapide 1250 is a fully automatic industrial unit, ideal for high-volume production of a wide range of products with premium finishes. 📊 Technical Specifications and Capabilities Production Versatility: Produces blocks (standard and hollow), paving stones, road kerbs, and decorative pieces. Nledpfx Aszgv Iuea Ijc Adjustable Heights: Capable of producing pieces with heights ranging from 5 to 30 cm. Bi-Layer Option: Perfect for paving stones with differentiated color or texture finishes. High-Strength Structure: Designed to withstand demanding compaction and industrial vibration cycles. 🔍 Equipment Condition: Used, in the mechanical and visual condition visible in the photos. This robust equipment is ideal for those seeking high productivity with an initial investment significantly lower than that of a new machine.

Year of construction: 2024, condition: used, functionality: fully functional, ISC Recycle offers you a vertical compressed air tank in excellent condition, manufactured according to the most stringent industrial standards. Brand: X.PAUCHARD Model / Reference: RTCA5FA001 Condition: Used (Very recent) Capacity: 500 Liters Year of manufacture: 2024 Test date: 02/12/2024 Maximum operating pressure: 0 / 11 bar Test pressure (PT): 15.8 bar Operating temperature (TS): -15°C / +65°C Manufacturing standard: CODAP 2020 Nsdpfszgthrsx Aa Ielc Fluid type: Group 2 Gas (GR2) Classification: Category IV / Type H1 Do not hesitate to contact us for more information.

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, We have silver container machine 3 moulds 750ml 2 cavity , 450ml 2 cavity, and 230ml 3 cavity. 15hp compressor, silver pouches manufacturing machine with 8 sizes blades, silver foil rewinding machine, pvc wrap rewinding machine, paper plate and dhone making machine. Nsdozgr E Nepfx Aa Islc

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 100 h, Automatic machine for the production of decorative (EPS) polystyrene ceiling tiles for sale. The machine has a very high production capacity, producing one tile every 3 seconds. The raw material used is EPS 100 polystyrene. The thickness of the tiles can be adjusted, with a minimum thickness of 7 mm. The machine can be operated by a single person. The polystyrene sheets are loaded on the left side of the machine. The machine automatically feeds them, stamps the pattern, and ejects the finished tiles on the right side, where they can be packed directly into boxes. Tile dimensions: 500 × 500 × 7 mm Machine dimensions: 4 m × 0.8 m × 2 m Power supply: 220 V The investment can be recovered in a very short time – within a maximum of one year. The machine was used for approximately one month and is almost new. The price is for the machine only. Price does not include VAT. Nlsdpfxjzgf Ahs Aa Isc The 8 molds are sold separately at €1,200 each.

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, component A and component B The dispensing head has been extended with a Y-shaped slide. - Manual adjustment for the mixing system - RAMPF mixing system MS-S (static) - Pressure monitoring for component A + B - Material pressure tank 50 l for component A - Level monitoring for component A + B - Material recirculation to the dispensing pump for component A and B - Material evacuation for component A - Vacuum pump 25 m³/h - Waste container 60 l with pipe Njdpfx Aszgck Nea Ielc -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part - Work table approx. 1,400 mm x 500 mm with table top - Transfer station for lid drum, component A - Transfer station for bung hole drum, component B - Dispensing control (Siemens PLC control based on S7-300) - Precision piston dispensing pump for component A and B - Positive displacement metering pump A, component, 257 ccm - Positive displacement metering pump B, component, 64 ccm --> 1 x spare positive displacement metering pump A and positive displacement metering pump B are included. These have been reconditioned by Rampf as an exchange unit. (see picture) Note: The potting system is located at our site in Austria.

Condition: excellent (used), Knürr-Heinzinger Type: PHN 1200-4 Power Supply: Mains 1200 Volts 4 Amperes Nsdszgcbhopfx Aa Ijlc Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a used eurokraft computer cabinet. Product description: Nsdezgcbbepfx Aa Ielc Sturdy, powder-coated steel sheet construction. Overall dimensions: Height x Width x Depth 1638 x 600 x 350 mm. Enclosure for flat-screen monitor, lockable. Acrylic glass panel, HxW 420 x 450 mm. Internal dimensions HxWxD 548 x 598 x 330 mm. PC cabinet with side door, lockable. Internal dimensions HxWxD 480 x 570 x 348 mm. Panel, Width x Depth 900 x 600 mm, thickness 25 mm, melamine resin-coated. Technical data: Overall height 1638 mm Overall width 600 mm Overall depth 350 mm Internal dimensions, monitor compartment HxWxD 548 x 598 x 330 mm Max. screen size (TFT) 20 inches Body material: steel sheet, powder-coated Ventilation: passively ventilated (wall slots) Protection class: IP20 Feature: lockable Design: with work table Monitor compartment with Work surface dimensions 25 x 900 x 600 mm Weight: 44 kg Product type: computer cabinets Body color: blue-grey RAL 7031 Type: eurokraft basic computer cabinet Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.