Hudek Zagreb d.o.o.

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 23697, cutting height (max.): 120 mm, total width: 1,500 mm, total length: 2,200 mm, total height: 1,900 mm, overall weight: 2,000 kg, saw blade diameter: 360 mm, cutting width (max.): 230 mm, chain width: 250 mm, working height: 1,000 mm, type of input current: three-phase, input voltage: 380 V, height adjustment type: mechanical, power: 36.77 kW (49.99 HP), Equipment: documentation/manual, The Raimann K23D multi-blade saw is still in operation and will be dismantled at the end of 2025. - Inspection possible at any time Nedpfexyv U Iox Ah Dsdd - 2 saw bushings included - Operating manual and circuit diagram are available

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Double-shaft multirip saw Rema DMJB-200 Year of production: 2004 The machine is in very good condition, little used, complete with a chip extractor mounted from above. DTR documentation included. Technical data: - saw blade diameter: 350 mm - cutting height of wood: 25–200 mm - minimum thickness of finished slats: 8 mm - maximum spacing of outer saws: 280 mm - minimum length of material: 800 mm - main motor power: 2 × 45 kW - spindle speed: 3300 rpm - conveyor width: 300 mm - feed drive motor power: 3 kW Nedpfx Ahjxyq Nas Dodd - pressure roller drive motor power: 2 × 0.75 kW - extraction nozzle diameter: 2 × 200 mm - required extraction air volume: 2 × 3400 m³/h - table height: 850 mm - machine weight: 5500 kg

Condition: good (used), Year of construction: 2020, Still in very good condition multi-blade saw with 1 movable saw blade. 22 kW motor. Nsdpfxsxyirte Ah Dsdd

Condition: used, Edger saw with output conveyor Manufacturer: Larmet Year: 2014 Edge banding machine: Length: 193 cm Nodpfxsxyh U He Ah Dsdd Width: 85 cm Height: 220 cm Motor power: 18.5 kW Board separating conveyor: Length: 615 cm Width: 68 cm Height: 190 cm Roll length: 40 cm Motor power: 1.5 kW

Condition: used, Multisaw Length: 270 cm Width: 150 cm Height: 160 cm Nsdpfxoxygbrs Ah Dedd Motor power: 22 kW

Condition: good (used), Year of construction: 2016, I sell the multirip saw of slovenian production MEBOR VR900. Cutting height under the blade 160mm / possibility of adjustment Width of cut on the feed wheel max. 900mm. Njdpfxjxxgy So Ah Djdd 1 pc. moving head with laser adjustment. Diameter of main saw blade 300 - 500mm. Motor 55 KW. Total weight approx. 4000kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 04A62, cutting height (max.): 150 mm, saw blade diameter: 450 mm, cutting width (max.): 690 mm, spindle speed (max.): 3,600 rpm, TECHNICAL DETAILS Max. saw blade diameter: 450 mm Max. distance between saw blades: 550 mm Ndedoxw R Nbjpfx Ah Dod Max. cutting width: 690 mm Max. cutting height: 150 mm Min. workpiece length: 2,000 mm Min. feed speed: 20 m/min Max. feed speed: 120 m/min Max. spindle speed: 3,600 rpm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 2,200 x 2,150 x 2,080 mm Weight: 3,500 kg Main motor power: 30.0 kW

Condition: excellent (used), Catalogue number 7806 TECHNICAL DATA - Track width: 300mm - Shaft width: 200mm - Max cutting height: 100mm - Max saw blade diameter: 300mm - Saw blade bore diameter: 60mm – Upper section - 2 rows of pawls/kickers - Smooth pressure shaft, slip type - Shaft with saw blades - Smooth pressure shaft, slip type – Lower section Nedpfoxvcbgex Ah Dodd - Guide rail - Pawls - Track - 2 types of feed speed + stepless adjustment - Main motor: 22.37kW - Central lubrication - Table (length/width): 1430x700mm - Extraction nozzle diameter: 150mm - Dimensions (L/W/H): 2100x1450x1400mm - Weight: 1311kg ADVANTAGES – Italian manufacture – Very good condition – Used multi-blade saw Net price: 29,900 PLN Net price: 7,120 EUR based on exchange rate 4.2 PLN/EUR (Prices may vary with larger rate fluctuations)

Condition: excellent (used), Catalogue number 7804 TECHNICAL DATA - Track width: 350mm - Shaft width: 330mm - Mounted blade: 300mm - Max blade diameter: 400mm - Blade bore diameter: 70mm - Max cutting height with 400mm blade: 150mm - Table dimensions: 2240x770mm – From above: - kickback/retractors - slip roller - retractors - smooth slip roller - shaft with saw blades Ndedpfsxvb S Rjx Ah Dod - 2 slip and pressure shafts – From below: - roller in front of the table - guide - pawls - track - central track lubrication - electric raising of saw blade shaft 0.75kW - electric raising of machine body 0.75kW - variable feed speed adjustment - Extraction nozzle diameter: 320mm - Main motor: 45kW - Overall dimensions (L/W/H): 2280x1820x2040mm - Weight: 2850kg ADVANTAGES – Czech production – Used multi saw machine – Technical documentation (DTR) – Very good condition Net price: 62,900 PLN Net price: 14,970 EUR depending on EUR rate 4.2 (Prices may change with significant fluctuations)

Condition: excellent (used), Catalog number 7805 TECHNICAL DATA - Track width: 340 mm - Roller width: 340 mm - Disc arbor diameter: 80 mm - Installed discs on upper shaft: 350 mm - Installed discs on lower shaft: 300 mm - Max cutting height: 200 mm - Min length of processed material: 700 mm – From above - 2 rows of kickback fingers - Smooth, slip, pressure shaft - Kickback fingers - 2 smooth, slip, pressure shafts - Saw shaft - 3 smooth pressure rollers – From below - Track conveyor - Saw shaft - Track conveyor - Infinitely variable feed speed adjustment - Main motors: 2 x approx. 55 kW - Feed motor: 3 kW - Electric up/down elevation of the main body - Manual adjustment of saw shafts - Central lubrication - Extraction port diameter: 2 x 200 mm - Dimensions (L/W/H): 2700 x 1800 x 2150 mm - Weight: approx. 5,000 kg Nsdpfx Ahoxvb Sds Djdd ADVANTAGES – German-made – Double-shaft design – 2 x 55 kW motors – Used multi-blade saw, in very good condition Net price: 178,900 PLN Net price: 42,590 EUR (at 4.2 EUR exchange rate) (Prices subject to change with significant rate fluctuations)

Condition: excellent (used), Catalogue number 7807 TECHNICAL SPECIFICATIONS - Track width: 350mm - Cutting width: 350mm - Blade diameter: from 355 to 505mm - Cutting height: 10-170mm - Spindle diameter: 80mm - Table dimensions: 1900x790mm - Height from base to table: 830mm From above: - 2 rows of pawls/kickers - 2 smooth, metal glide rollers - Shaft with saw blades - 2 pressure glide rollers From below: Ndjdpexvb Hzefx Ah Dsd - Guide bar - Pawls/kickers - Track - Electric height adjustment of the body - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 4kW - Main motor: 75kW - Extractor spigot diameter: 2x150mm - Overall dimensions (L/W/H): 2050x1800x1800mm - Weight approx.: 3500kg FEATURES - German-made - DTR technical documentation - Used multi-blade saw - Very good condition Net price: 58,900 PLN Net price: 14,000 EUR depending on exchange rate 4.2 EUR (Prices may change due to stronger exchange rate fluctuations)

Condition: used, Year of construction: 1999, with spiked chains feed gearbox newly mounted in 2025 incl. approx. 15 carbide-tipped blades 5 pressure rollers used, in good condition Manufacturer: Raimann Type: KS 310 Year of manufacture: 1999 Machine no.: 26085 CE type-certified GS wood dust tested Ndedpfoxuv Rlex Ah Djd Motor: 30 kW Chain width: 340 mm Max. cutting width: approx. 650 mm Cutting height: approx. 120 / 105 mm with roller Kerf: approx. 650 mm Feed speed max.: 8 - 35 m/min / 1.5 kW Electrically adjustable Saw blade diameter min. 250 mm - max. 360 mm / 80 mm bore Shaft diameter: 65 mm, 3900 rpm Min. workpiece length: 450 mm with roller Spiked chains Extraction port: D 180 mm Space requirement approx. 2100 mm x 1400 mm x 1600 mm Weight approx. 2200 kg Nominal current 50/41 A max Located at 97447 Gerolzhofen, free loaded, unpacked Sold as is, as inspected without warranty or guarantee

Condition: used, Year of construction: 1980, used, in top condition Make: Raimann Model: K 23 Year of manufacture: 1980 Chain width: 250 mm Cutting width: approx. 230 mm Cutting height: approx. 120 mm without pressure bar / with pressure bar 110 mm Feed speed max. 8 - 35 m/min steplessly adjustable Saw blade diameter: 360 mm x 80 – bushing Shaft diameter: 65 mm Minimum workpiece length: 290/750 mm Extraction connection D 200 mm Space requirement: approx. 2400 mm x 1500 mm x 1600 mm Weight: approx. 2100 kg Total connected load: approx. 75 A Ndedpfx Aoxuv Nujh Dod Location: 97447 Gerolzhofen, free loaded, unpacked Handed over in as-is condition, as inspected No guarantee or warranty

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Costa trimming saw, type Leopard, 2 x 55 kW Nedpexupphjfx Ah Djdd Cutting height: 200 mm Max. clamping width: 350 mm Feed speed: 4 - 24 m/min Weight approx. 4500 kg

Condition: used, WD Edger: - Motor power 55 kW - Two movable sleeves - Sleeve length 60 mm - Max saw blade diameter 400 mm - Hydraulic saw blade spacing - Four lower feed rollers - Two upper feed rollers Centering roller table: Nodpoxuipbjfx Ah Dsdd - Total length 7000 mm - Total width 160 mm - Five lower feed rollers - Roller diameter 160 mm - Length 1000 mm - Four upper hydraulic hold-downs - Six centering material clamps - Hydraulic feed

Condition: good (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 23440, TECHNICAL DATA : Chain Working width : 340 mm Ndodpfx Aoxt Upkeh Djd Number of spindles/shafts : 2 Engine size : 2 x 75 Kw Max Cutting height 200 mm Material width max. 800 mm Feed speed regulated on the inverter Feed chain with spikes ( Very good condition ) Sawblade diameter upper shaft max. 400 mm / lower shaft 350 mm Spindle diameter 65 mm Sleeve diameter 80 mm Four rows of pawls four upper pressure rollers Electric height adjustment Ability to work independently with each spindle Central lubrication 2 x Emergency stop Lots of extra rings in all sizes( see pictures ) 2 x saw boxes with sawblades 1 x 250 mm tool with 4 knives Dimensions : L 2700 x W 2600 x H 2000 mm, weight : 5500 Kg

Condition: excellent (used), functionality: fully functional, Heavy-duty Raimann multi-blade saw. Chain bed width 500 mm. Usable clamping length of saw sleeves 570 mm Ndedsxtwv Hopfx Ah Dod Cutting height 120 mm. Powered top rollers. Electric pressure beam adjustment. Spiked chain. Counter bearing. Stepless hydraulic feed from 0 - 50 m/min. Drive motor 75 kW with pneumatic tensioning station. 2 saw sleeves. Safety devices. Electrical control cabinet. Etc. Some new parts installed.

Condition: excellent (used), functionality: fully functional, Heavy-duty Raimann multi-blade saw. Chain bed width 500 mm. Usable clamping length of saw sleeves 570 mm Cutting height 120 mm. Powered top rollers. Ndsdpfx Aoxtwvtoh Dod Electric pressure beam adjustment. Spiked chain. Counter bearing. Stepless hydraulic feed from 0 - 50 m/min. Drive motor 75 kW with pneumatic tensioning station. 2 saw sleeves. Safety devices. Electrical control cabinet. Etc. Some new parts installed.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008 / 576, cutting height (max.): 250 mm, cutting width (max.): 150 mm, saw drive: 15,000 W, power: 15 kW (20.39 HP), warranty duration: 6 months, NEVA warranty includes plug & play equipment: Ndsdpfx Ahjxtm Raj Djd - material guiding per choice: channels, center guide, side guide - 2 frames, 2 sets of saw blades and 2 sets of spacers - assembly frame and accessories - torque wrench, set of tools, etc. - complete revison of machine before leaves our factory The ORBIT Plus Thin Cutting Frame Saw was developed for cutting solid wood blocks into gluable slats with a minimum of saw kerf waste. Thin Cutting Frame Saw ORBIT utilizes a unique up/down method of movement for cutting veneer slats. Unlike conventional frame saws that move up and down in a lineal motion, the ORBIT Thin Cutting Frame Saw uses a patented swing-out motion at the bottom of the saw stroke. Applications of use: Parquet and engineered flooring, doors, windows, stairs, furniture, musical instruments, pencils, sport equipment (ski, snowboards, hokey sticks), wooden-covers for fruit and vegetables, etc. This unique movement of Thin Cutting Frame Saw ORBIT has several distinct advantages over the frame movements on older, conventional frame saws. With a conventional frame saw, a great deal of heat is generated by sawdust that is captured/packed into and around the saw blade teeth. This occurs because the sawdust and wood chips are unable to clear out from the blade during the upstroke. This fact is especially true when cutting high, as some of the teeth in the center of the saw blades never clear out of the cut. Because the ORBIT saw frame moves out of the cut during the upstroke, wood chips and sawdust fall clear from the saw blades. The result is less heat build up on the saw blade, longer saw blade life, dust free slats, the ability to use a thinner kerf saw blade and first of all increased production capacity of the ORBIT frame saw.

Condition: excellent (used), functionality: fully functional, saw blade diameter: 350 mm, chain width: 300 mm, extraction nozzle diameter: 150 mm, working height: 110 mm, type of input current: three-phase, height adjustment type: mechanical, saw blade bore: 70 mm, spindle diameter: 48 mm, OGAM PO-280 Track Multirip Saw Ndjdpfextc Iujx Ah Djd Specification: • Condition – used, after complete overhaul • Manufacturer – OGAM • Model – PO-280 • Track width: 300 mm • Max working height – 110 mm • Main motor power: 25 HP (~18 kW) • Maximum blade diameter: 350 mm • Spindle Ø48 mm, sleeves Ø70 mm • Track feed speed adjustment range: 5–40 m/min • Track in very good condition, no wear • Extraction nozzle Ø150 mm • Weight – approx. 2000 kg • Overall dimensions – 190 x 150 x 165 cm (W x L x H) Additional information: • The machine is in very good technical condition, ready for immediate use • The photos shown represent the actual condition of the item for sale • Test running and inspection of the machine on site are possible.

Condition: good (used), Year of construction: 2006, max. thickness of cut prism: 150 mm max. width of cut prism: 400 mm spindle diameter: 70 mm spindle working length: 330 mm circular saw blade diameter: 250–425 mm Ndsdpfsxtaghsx Ah Dod spindle keys (x2): 20x5 mm capacity (8h): 18 m³ main spindle motor power: 30 kW spindle drive motor speed: 2900 rpm feed drive motor power: 2.2 kW feed drive motor speed: 1425 rpm feed speed (stepless adjustment): 0–13 m/min network voltage (50 Hz): 3x400V dimensions (L/W/H): 3050/1410/1400 mm weight: 1000 kg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, CML - DEP FLEXIBLE LINE FOR WINDOWS ELEEMNTS PRODUCTION AS PER LAYOUT LY-09-087-05 DATED 27/01/2010 01 BELT CONVEYOR 1=4500 mm 02 "L" TRANSFER WITH PVC COATED ROLLERS AND BUFFER Njdpfxextacis Ah Dodd 03 DOUBLE END TENONER CML MOD. STDA 336 04 FULL SYSTEM FOR MACHINE CONTROL SEE TECHNICAL FEATURES ATTACHED PDF-FILE

Condition: used, Year of construction: 1998, functionality: fully functional, cutting height (max.): 160 mm, saw blade diameter: 450 mm, cutting width (max.): 450 mm, chain width: 450 mm, type of input current: three-phase, track width: 450 mm, working width: 870 mm, disc diameter: 450 mm, – very good condition – manufactured in the Czech Republic – year of manufacture: 1998 TECHNICAL SPECIFICATIONS: – track width: 450 mm – cutting height: 160 mm – max. blade diameter: 450 mm – main motor power: 45 kW – min. cutting length: 800 mm – max. input material width: 870 mm – shaft diameter: 65 mm Nodpfxextabxe Ah Dodd – sleeve diameter: 80 mm – feed adjustable via frequency inverter – feed speed range: 4-40 m/min – three rows of anti-kickback pawls – connection spigot diameter: 300 mm – dimensions (L/W/H): 240 x 210 x 200 cm – weight: 3300 kg

Condition: used, Raimann KBUBM multi-blade saw for the precise and economical ripping and/or edging of solid wood, glued laminated timber, or panel materials into multiple strips. Its robust construction and powerful drive ensure high cutting accuracy and continuous operation in industrial applications. Ideal for sawmills, wood processors, and furniture manufacturing. chain width: 210 mm cutting height: about 70 mm engine power: 22 kW Nsdpfoxryl Iox Ah Dsdd

Condition: used, Year of construction: 2006, functionality: fully functional, cutting height (max.): 170 mm, saw blade diameter: 450 mm, cutting width (max.): 450 mm, – Year of manufacture: 2006 – Original paint TECHNICAL SPECIFICATIONS: – Main motor: 30 kW – Feed motor: 1.5 kW – Cutting height: 170 mm – Cutting width: 450 mm – Max. blade diameter: 450 mm – Two upper pressure rollers – Two lower feed rollers – Spindle diameter: 70 mm – Feed speed adjustable via gear motor – Three rollers before and after the saw – Roller length: 64 cm – Dimensions (L/W/H): 280 x 140 x 160 cm – Weight: 1100 kg Ndodpfx Ahoxqlu Eo Ded