Sia Firetex

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: WL-01990-21, Industrial heater for oil & gas, 19,000 m3 per hour. Guedpfx Ajzyubyjdteg Consumption: 302 kW. The burner is a Riello burner, and the gas valve unit is from DUNGS. In new condition.

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Guedpfx Aozxqd Iodtog Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 3,547 mm, total height: 2,163 mm, total width: 260 mm, conveyor belt width: 260 mm, delivery head: 1,700 mm, ejection height: 1,700 mm, conveying length: 3,567 mm, transport height: 1,700 mm, Magnetic scraper conveyors with a conveying capacity of up to 60 kg/h, drive motor 0.4 kW. Both conveyors were only used for a short period, less than 100 operating hours. Gjdpfxezwpnve Adtsug They can be delivered individually or as a package with a suitable chip centrifuge, which was also only used for a short period.

Condition: good (used), Year of construction: 1997, functionality: fully functional, We are offering a boiler from the renowned company Urbas. The boiler has a heating output of 500 kW. Type: UR-RR-500. The boiler burns biomass (bark, wood chips, logs, and sawdust). Year of manufacture: 1997 Wiring, complete valve and pump set included. Gsdpfx Adezvxv Tetoug Multicyclone. Excellent technical condition. Optionally, for an additional fee, the boiler is available with a movable floor and chimney.

Condition: like new (used), functionality: fully functional, type of input current: DC, input voltage: 230 V, input frequency: 50 Hz, Equipment: documentation/manual, type plate available, Industrial Gas Infrared Heaters Lersen COMPACT TOP COUT08 – 2 Units For sale: 2 industrial gas-fired infrared radiant heaters, Lersen CZ COMPACT TOP, model COUT08. Suitable for heating production halls, warehouses, workshops, and other large industrial spaces. Technical specifications: Manufacturer: Lersen CZ s.r.o. Type: COMPACT TOP Model: COUT08 Quantity: 2 units Guodozvainopfx Adtsg Fuel: G20 natural gas Rated input: 37–48 kW Rated heating output: 33–43 kW Gas consumption: 3.5–4.6 m³/h Electrical connection: 230 V / 50 Hz Electrical consumption: 70 W CE marked Made in the Czech Republic Both units are being sold together. The condition can be seen in the photos. Price for both units: €1,250 Location: Ivanka pri Nitre, Slovakia For further information or additional photos, please contact me via message.

Condition: ready for operation (used), Year of construction: 2009, A Nolting moving grate wood-fired boiler system is offered. Max. boiler output: 1125kW, nominal heat output: 900kW/1125kW, max. fuel moisture: W50/M30, optimum efficiency range: >90%, flue gas connection: DN250. Machine weight: approx. 4800kg. Inspection possible by arrangement. Gusdpfxszt Sk Ej Adteg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 21/A186898, power: 141.7 kW (192.66 HP), overall weight: 628 kg, total width: 1,020 mm, total height: 2,385 mm, type of input current: AC, input voltage: 230 V, nominal heat output: 141.7 kW (192.66 HP), temperature: 90 °C, fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, Equipment: documentation/manual, hot water, type plate available, Professional ACV HeatMaster 200 N Boiler – 141.7 kW – Year 2021 For sale: used ACV HeatMaster 200 N boiler, manufactured in 2021. High-capacity boiler with integrated domestic hot water production, suitable for commercial buildings, public institutions, hotels, farms, workshops, and installations requiring significant heating and hot water needs. Key features: Brand: ACV Model: HeatMaster 200 N Year: 2021 Maximum useful power: 141.7 kW Maximum input power: 154 kW Fuel used: propane (LPG) Domestic hot water tank: 400 liters Primary circuit capacity: 241 liters Maximum temperature: 90 °C Maximum heating pressure: 3 bar Maximum domestic hot water pressure: 8.6 bar Electrical supply: 230 V / 50 Hz Dry weight: approximately 628 kg Boiler currently disassembled. It was in operation before disassembly. Propane burner included. Some or all of the peripheral equipment from the previous installation may also be available: tank(s), circulators, valves, and piping components. To be discussed with the buyer based on their needs. Guedpfx Adsztz H Aotog Nameplate available. Additional photos available upon request. Heavy equipment: transportation is the responsibility of the buyer. Possibility to discuss loading arrangements. Price: €7,500 excluding VAT, negotiable.

Condition: excellent (used), Year of construction: 2019, Containerized boiler system HOVAL MAX-3 Output: 1750 kW Year of manufacture: 2019 Gjdpfszp R Nfex Adtsug Burner: ELCO

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water Guedpfx Aezp Rmqjdtjg - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: good (used), Year of construction: 1999, Kohlbach – Hydraulic discharge system with push rods 1. System description The two-beam hydraulic discharge system is used for the uniform and continuous discharge of wood chips from a rectangular fuel silo. The discharge shovels transport the material through alternating hydraulic lifting movements to feed the heating boiler, thereby ensuring a consistent fuel supply. 2. Main dimensions Silo length: Version with 6 discharge shovels: 7.50 m Width of shovels: 900 mm Shovel depth: 250 mm Shovel height: 70 mm 3. Drive and operating principle Hydraulic drive with 2 hydraulic cylinders Automatic, alternating lifting control, synchronized with the boiler control 4. Connections Material discharge into a central collection channel Further transport by means of a screw conveyor or chain conveyor Connection to the heating boiler: DN 315 5. Installation requirements Industrial floor in MONO-FINISH quality with a levelness tolerance of ±5 mm Foundation plates, ceiling openings and cladding to be carried out on site Sufficient service access for the hydraulic unit must be ensured 6. Advantages Reliable operation with wood chips of different grain sizes and qualities Consistent fuel feed for stable 24/7 continuous operation Low maintenance effort Gedpfx Adozl Hqkotoug The system is dismantled and ready for loading onto the truck. The discharge system does not require special transport because: the discharge beams can be disassembled into 6.3 m long segments, the transport width is significantly below 4.24 m, as the beams are removed individually, the discharge shovels can be dismantled, transport with a standard semi-trailer is possible. Inspection in our warehouse in Szentendre/dismantled is possible after prior arrangement.

Condition: used, Year of construction: 2008, overall weight: 1,250 kg, total width: 1,220 mm, total length: 2,700 mm, total height: 2,245 mm, nominal heat output: 600 kW (815.77 HP), No. 10035 2 units stationary warm air heater / generator Kroll 730 S-300 Used, year of construction 2008 According to our customer / the previous owner, the machines are fully functional and can be viewed on site Heat output QN: 600 kW Rated heat input QB: 652 kW Warm air flow rate VN: 48,300 m³/h Rated pressure DN: 300 Pa Motor: 15.0 kW / 28.6 A CE-compliant Transport dimensions each approx. 2700 x 1220 x 2245 mm LWH Weight each approx. 1250 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Godpfozlr Uuox Adtsug Delivery terms: ex location

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 66422, pressure: 3.5 bar, 3 buffer tanks with a storage capacity of 2200 liters each, also available for individual sale. Guedpezllc Sofx Adtjg

Condition: excellent (used), Year of construction: 2011, Weishaupt gas burner, with Dungs gas piping DN 50 Burner type: WM-G10/3-A Godpfx Aszdku Rodtjug Design: ZM-LN Year of manufacture: 2011 Output: 125-900 kW

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, overall weight: 150 kg, Equipment: type plate available, Weishaupt WM-GL 10/3-A ZM-T, power output 110-1000 kW. 3 units available. Year of manufacture: 2010 Burner power regulation: gas – modulated Gujdszcg Hzopfx Adtog oil – 3-stage Gas path of the burner: maximum supply pressure 500 mbar (gas paths for other supply pressures available upon request) The burner is equipped with a DMV 525 gas valve, an FRS 520 stabilizer, and a 520/1 filter. Flame tube extended by 100 mm (we also have WM-GL 10/3 burners without extension). Fuel type: natural gas, LPG, light fuel oil. Burner power output in the range of 110-1000 kW. Burner control unit: WFM 54 + AGM module Electric motor 1.5 kW / 380V. CE certificate + complete burner documentation (manual + burner electrical diagram). QRA 2 photocell. The burner is in good working order and complete, having undergone a comprehensive inspection. We are a company specializing in the service of Weishaupt burners for over 30 years. We guarantee 100% functionality of the burners we sell. We also have other burners and spare parts for all Weishaupt burner models available for sale.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, overall weight: 250 kg, input voltage: 380 V, Weishaupt WM-L30/1 R oil burner, power 800-3100 kW, manufactured in 2016. Burner power control: power continuously adjustable. Fuel type: fuel oil. Burner power range: 800-3100 kW. WFM 100 controller with power regulator (LMV 51.100C2). 7.5 kW/380V electric motor. CE certificate + complete burner documentation (operating manual and burner wiring diagram). QRB 1 photocell. Gusdpfx Aezcg D Tedteg Burner is 100% complete and has been serviced. We are a company specializing in the service of Weishaupt burners for over 30 years. We guarantee the proper functioning of the burners we sell. We also have other burners and spare parts (new and used) for sale. Information available upon request.

Condition: like new (used), Year of construction: 2019, 1. WESHAUPT gas burner, with DUNGS DN65 gas line Type: WM - G20/3-A Year of manufacture: 2019 Output: 350-2600 kW Design: ZM 2. WESHAUPT gas burner, with DUNGS DN65 gas line Gsdpfjzbz Idex Adtjug Type: WM - G20/3-A Year of manufacture: 2017 Output: 350-2600 kW Design: ZM 3. WESHAUPT gas burner, with DUNGS DN65 gas line Type: WM - G20/3-A Year of manufacture: 2013 Output: 350-2600 kW Design: ZM

Condition: excellent (used), Year of construction: 2016, For sale: a functioning and very well-maintained gas burner, brand WEISHAUPT WM-G20 (2600 kW), with a DUNGS DN65 gas manifold. Gedpfx Adjzamgcstoug 1. WEISHAUPT WM - G30 (3800 kW); two units available. - Output: 400 - 3800 kW - Design: ZM-LN - Year of manufacture: 2016

Condition: like new (used), Year of construction: 2013, For sale is a functioning and very well-maintained gas burner from the Weishaupt brand, including gas piping (Dungs DN 80). 1. Burner type: WM-G30 Output: 600-5700 kW Design: ZM Year of manufacture: 2013 Gusdpfxezamd Uj Adtog Connection pressure: 15-500 mbar

Condition: excellent (used), Weishaupt RGL50 / 4900 kW / Oil & Gas / Dual-fuel burner Guodpfx Adezal Ncoteg

Condition: like new (used), Year of construction: 2015, For sale is a functional and very well-maintained gas burner, brand WEISHAUPT WM-G20 (2600 kW), with a gas manifold DUNGS DN65. WEISHAUPT WM - G20 (2600 kW) Godpfx Aezab H Dsdtjug - Output: 350 - 2600 kW - Design: ZM - Year of manufacture: 2015

Condition: excellent (used), Year of construction: 2006, For sale are functional and very well-maintained dual-fuel burners from the Weishaupt brand, model GL3-630 kW, complete with a gas line DUNGS DN 40. Guedpezaby Rsfx Adteg Weishaupt: GL3 - (630 kW) Burner type: GL3/1-E Design: Dual-fuel Output: 90 - 630 kW 16 - 53 kg/h Year of manufacture: 2006

Condition: excellent (used), Year of construction: 2007, For sale are functional and very well-maintained gas burners from the Weishaupt G50 series – 5400 kW, including MULTIFLAM gas valve, manufactured in 200/. G50/1-B MULTIFLAM Output: 450 - 3500 kW Design: 3LN Gujdpfx Adezabnnoteg Year of manufacture: 2007

Condition: excellent (used), Year of construction: 2011, 1. Gujdpfx Aozaa Uajdteg Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Year of manufacture: 2011 Output: 110 - 1250 kW. Connection pressure: 15-500 mbar. 2. Weishaupt gas burner WM-G10 / 4-A. With Dungs gas piping DN 50. Design: ZM Year of manufacture: 2005 Output: 120 - 1250 kW. Connection pressure: 15-500 mbar.

Condition: excellent (used), Year of construction: 2002, Weishaupt gas burner G7/1-D, with gas line Dungs DN 50 Design: ZMD-LN Output: 250-1550 kW Godpfx Aoy Uvt Nedtjug Connection pressure: 15-500 mbar Year of manufacture: 2002

Condition: excellent (used), Year of construction: 2001, Weishaupt gas burner G30/2-A, with gas train Dungs DN 65 Version: ZM Power: 300-2150 kW Supply pressure: 15-500 mbar Gsdpfxsy Uvkzs Adtsug Year of manufacture: 2001