Fashion Supply LTD

Condition: like new (used), Year of construction: 1989, functionality: fully functional, T. Giusti & Son Ltd s/s double jacketed mixing tank with steam boiler, serial number: J10717, capacity: 500 liter, dimensions tank: Ø 1100 mm x 2600 mm, dimensions steam boiler: 800 mm x 620 mm x 1800 mm, with switch cabinet, Nodexrnuwspfx Ac Dsdd

Year of construction: 2011, condition: excellent (used), 2011 Pollogen Maximus RF body contouring unit Nodexac Unspfx Ac Dedd Good working condition. Please check out our other listings as well.

Year of construction: 2020, operating hours: 1,800 h, condition: good (used), functionality: fully functional, machine/vehicle number: 50850283/P.0000893.03.05, The assembly line is a production system consisting of three separate units, interconnected by conveyor belts. In the first section, consumable materials are fed in via rollers, folded, the nose clip is integrated, welded, and then cut to the correct length. The finished mask blanks are transported via an indexing conveyor and additional transport belts to the next units, which are arranged in parallel. Each of these stations feeds and welds the ear loops to the mask body. The line is suitable for the manufacture of surgical and general medical face masks, made from single- or three-layer PP (polypropylene) nonwoven fabric. System configuration Each production cell is based on an aluminum profile frame with swing doors made from Makrolon. For the required process stability, the stations are mounted on a solid aluminum table plate. The control cabinets are integrated into the frame. The equipment includes, among others, 3 ultrasonic welding units, Siemens PLC control, and various pneumatic systems from Festo. Performance requirements Output (gross): ≥ 80 units/minute Technical availability: ≥ 90% (VDI 3423) Required floor space for the complete system: approx. 6,000 x 5,000 mm Connection values Electrical connection: Operating voltage: 3P/N/PE 400 V AC 50Hz Mains fluctuation: ± 5% Short-circuit design: < 10kA Network type: TN-S Pneumatic connection: Compressed air: 6 bar ± 1 bar Ndodpsw Dn Uwefx Ac Djd Ambient conditions Temperature range: 10°–35°C Max. humidity: 75% (non-condensing) Emissions Sound pressure level during operation: ≤ 78 dB(A) according to EN ISO 11204:2010 The machine is currently out of use and was regularly serviced during its operational period. At present, the machine is dismantled, with individual components stored under dust protection. Upon request, we can also sell our remaining raw material stocks for production.

Condition: like new (used), Year of construction: 2009, operating hours: 104 h, RIX 2V3B-4.1V-HP-P1C oxygen compressor Technical data: Engine power: 10 HP Inlet pressure: 40–50 PSI Outlet pressure: 3000 PSI Voltage: 400 V / 50 Hz Year: 2009 Number of operating hours: 104 Nedpfewwic Njx Ac Dsdd

Condition: new, Cytiva UNIPLATE V Bottom Microplate, 96-well, 250 µL, white polystyrene with V bottom (25 pcs) 7701-3250 1 box 50 pcs, 45 pcs unopened, 5 pcs opened Nodovxu Tkspfx Ac Dodd

Condition: used, functionality: fully functional, Year of construction: 2023, In this offer you purchase a used automatic edger ‘Nidek Lexce Trend/DB Patternless Edger’ Object of sale: 1 x Nidek Lexce Trend /DB EAN: 2008783216791 with the following equipment: incl. built-in tracer EAN: 2008783216838 Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: Nsdpevtbczefx Ac Dsdd You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: good (used), functionality: fully functional, Good working condition. Please check out our other listings as well. Ndsdpfx Asvpha Sjc Dod

Year of construction: 2022, condition: like new (used), SencorpWhite CeraTek TA12-P/2 heat sealer Make: SencorpWhite Type: CeraTek TA12-P/2 Function: Heat sealer / For sealing medical pouches / Pouch sealing machine Year of manufacture: 2022 Condition: As good as new (hardly used) Product Description Ndodpfx Aevdp N Djc Dod The CeraTek P/2 Series Precision Rotary Sealer is a versatile precision benchtop sealer designed for sealing medical pouches and other precision sealing applications The TA12-P/2 is a 12″ model - Maximum seal width 11.5" (approx. 30 cm) Standard features Top heat PLC with touch screen HMI Temperature control with closed loop control Short cycle alarm Electronic pressure control High/low temperature alarm High/low pressure alarm Resettable cycle counter External output connections CE and ISO 11607 compliant Cat. 3 safety reset 115 Volt +/- 10% Scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 2020, Fully-automatic assembly line for MA disposable face masks Manufacturer: PIA Automation Model: PIA-M200101 Year of manufacture: 2020 Mask types: - 1-ply nonwoven masks Ndodpfx Aceu T Rydo Ded - 3-ply nonwoven masks Mask size: 17.5 × 9.5 cm (adult) Output: 80 units/min Ultrasonic frequency: 20 kHz Machine dimensions: 6000 x 5000 x 2800 mm Voltage: 400V – 50 Hz Compressed air: 5-7 bar Power supply: 12 kW Cycle time: 80 units/min High output: 100,000 pieces per day Easy and safe operation Automatic alarm system Integrated intelligent control system Single-operator operation The manufacturing process includes automatic feeding of filter material, folding and pressing, feeding of nose bridge clips, mask forming, mask cutting, ear loop welding, stacking for packaging, and other auxiliary processes Particularly suited for the production of three-layer disposable masks. Additionally, a UV unit has been installed to enhance hygiene standards, as well as a stacking device for preparing items for further packaging.

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. Ndsdpfx Acou D Aris Dod The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: excellent (used), Mesdan Lab Knitter 294E Single-Cylinder Laboratory Knitting Machine High-precision single-cylinder laboratory knitting machine For the production of tubular knitted fabrics Mechanism for regulating fabric count Automatic oiling system Ergonomic control panel Electronic yarn length meter Variable speed control via potentiometer LED displays for monitoring machine functions Technical details: Dimensions: (LxWxH) approx. 850 x 450 x 1,750 mm Number of needles: 112 pcs Needle gauge: 0.24 mm Counting range for filaments: 400 ... 2,000 dtex Counting range for spun yarn: 8 ... 12 nne Supply voltage: 230 V Rated current: 1100 W Frequency: 50 Hz Weight: approx. 130 kg Njdpouuh Hxsfx Ac Dedd Product video More Find items – new and used – in our shop! International shipping costs upon request!

Condition: excellent (used), For sale: complete German-made measurement kit for diagnostics and machine setup, ideal for service, production, and inspection applications. The kit includes: • ROTUX Pocket Strobe™ stroboscopic lamp • Operating range: 30 – 12,500 FPM (flashes per minute) • Built-in display and adjustment dial • Battery powered (ANSMANN charger included) • Original case with foam insert Additionally: • HOLEX dial indicator 0–10 mm, accuracy 0.01 mm Ndedpfjupuk Hox Ac Ded • NOGA magnetic base with adjustable arm • Set of adapters and holders • Mounting elements and cables • All components in excellent technical condition, from a working workshop Manufactured in: Germany Condition: very good, complete set, not worn out ⸻ Ideal for service technicians, precision mechanics, or for monitoring rotational movement, shaft alignment, vibration, or synchronization in drive systems. The ROTUX lamp is a professional tool, not a Chinese replica.

Condition: used, functionality: fully functional, Air Liquide Arpege 55 Liquid Nitrogen Container With Storage Racks. Main characteristics include: - Aluminum vessel for both the long holding time and large capacity line: - Long holding time - Large capacity - Light weight and resistant - High quality polyurethane paint - On wheels Good working condition. Please check out our other listings as well. Ndedpfx Acjupttge Dsd

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 538518/1, Dear interested party, You will find all the data on the plant in the photos and in the PDF files. The plant can be viewed by appointment. We will be happy to answer any further questions you may have. Ndsdpfx Acoumv Ale Dod

Year of construction: 2020, condition: new, T-Shape 3-in-1 Multi-System // Built in 2020 T-Shape combines three powerful technologies that work simultaneously to promote collagen production and significantly reduce localized fat volume and skin elasticity. It provides a deep and immediate increase in blood circulation and lymphatic drainage, which in turn improves physical fitness. - Skin tightening - Cellulite reduction Ndsdpferxri Sjx Ac Dod - Fat deposit reduction - Circumference reduction - Post-liposuction treatment - Facelift and skin tightening RF (Radio Frequency) T-Shape generates a bipolar, quadripolar, and hexapolar radiofrequency signal. Heat is generated by the contact of RF (radiofrequency) energy with tissue impedance. When properly heated, the collagen-rich dermis is immediately denatured, the fibrils contract and thicken. In response to the initial heat, new collagen is produced, and the skin appears firmer, more compact, and younger. Vacuum Suction T-Shape features vacuum treatment technology with variable pulse modes. The vacuum lifts, folds, and compresses the skin to increase local blood circulation and stimulate lymphatic drainage. It promotes fibroblast activity and favors vasodilation. LLLT Laser Because the LLLT laser irradiates adipose tissue, it contributes to the formation of temporary micropores in fat cells and accelerates the fragmentation of triglycerides into glycerol and fatty acids, allowing them to escape from the cell, which in turn has a smaller volume. The released lipids are excreted through normal metabolic processes. LLLT effectively reduces body circumference through targeted application to the treated areas and has also been shown to reduce edema. Technical Specifications Supply voltage: 220/230 Vac 50/60 Hz Power consumption: 1300 W Weight: 45 kg Dimensions: 348 x 513 x 1008 mm Low-power laser wavelength: 760 nm Laser class: 3 R Laser density: 8 MW/cm² Bipolar radio frequency signal frequency: 1500 kHz (1.5 MHz) Maximum RF power: Less than 25 W Stimulated suction pressure: Less than 80 kPa (0.8 bar) Item condition: Used, good condition Find more items - new and used - in our shop! International shipping costs upon request!

Year of construction: 2020, condition: good (used), FFP2 Mask Machine – Mask Production Line Ndjdpferm R Hdox Ac Djd Manufacturer: Ruhlamat Model: MPL FFP2/016 Year of manufacture: 2020 Mask Production Line for N95/FFP2 Masks Dimensions (LxWxH): 8921 x 1494 x 1985 mm Clearance around the equipment: 1500 mm 50 Hz / 2.6 kVA Pressure: 6 bar Approx. weight: 2500 kg FFP2 masks are made of 3–6 layers of nonwoven fabric. This machine can produce masks with up to 6 layers. The machine consists of five stations: Station 1 – Unwinder Station 2 – Noseband punching and embossing roller welding Station 3.1 – Printing and welding of ear bands Station 3.2 – Folding edge alignment Station 4 – Contour welding and mask punching/cutting

Condition: like new (used), functionality: fully functional, Year of construction: 2020, automatic line for production of disposable textile rusks. Ndjdeqvl Uaopfx Ac Dod Full Automatic Mask Machine - production line for medical plastic masks capacity 90 - 100 pcs per 1 minute For more information and videos of the machine please contact us.

Year of construction: 2013, condition: good (used), BHT INNOVA E3 Professional Bronchoscope Washer INNOVA – Professional Endoscope Washer for Practices and Small Clinics The INNOVA™ E3s is the world's best-selling BHT endoscope washer. This endoscope washer is compact and offers a high capacity for endoscopes or bronchoscopes. Depending on the reprocessing, a total of 10 to 20 endoscope reprocessings are possible daily. This makes it the perfect solution for private medical practices and small clinics that value safe hygiene, efficiency, and reliability. Reliability and maximum cleanliness in every cycle: Compliant with DIN EN ISO 15883-1/-4 and the guidelines of the Robert Koch Institute (RKI), and with many additional functions, e.g., thermal self-disinfection at 90°C according to DIN EN ISO 15883-4, 4.8.1. - Flexible in combination with another INNOVA® E2 or E3 for 30 to 40 reprocessings daily. - Suitable for both glutaraldehyde and peracetic acid from a wide range of suppliers. - Suitable for commercially available endoscopes from Fuji, Olympus, Pentax, Storz, and Wolf. - Single-channel connection or patented pressure chamber available. Ndedpfoin Edwjx Ac Djd - Thermal reprocessing option, e.g., for multiple biopsy forceps, polyp loops, etc. - Thermal disinfection of the final rinse water as recommended by the Robert Koch Institute (RKI) for the DH version. - Secure documentation and traceability through batch control. User and endoscope identification via barcode scanner. - Data output via printer, data logger, or computer interface. Easy integration into existing IT systems Number of endoscopes: For 2 endoscopes or 4 ENTs Hygienic design: Hygienic workflow, single-door Channel connection system: Single-channel connection or patented pressure chamber system possible Single-channel monitoring system (CMS): No Chemistry Glutaraldehyde / Peracetic Acid: Both possible: DH version (with boiler, for glutaraldehyde) or DC (filter solution, for glutaraldehyde or peracetic acid) Documentation and integration: Yes, interface for printer/data logger as standard. Printer as standard. Optional scanner/IT interface Thermal reprocessing of instruments at 90°C: Available with additional equipment Electrical installation: 3-phase 400 V / 50 Hz AC+N+PE. Connected load: 11 kW. Fuse rating: 3 x 20 A Year of manufacture: January 19, 2013 Item condition: used Find more items - new and used - in our shop! International shipping costs on request!

Condition: new, Year of construction: 2025, functionality: fully functional, The (fish mask shape) mask machine offered here combines efficiency and safety features with an optimized fit. These product features are, among other things, thanks to the use of ultrasonic technology, an intuitive HMI with touch screen for easy and clear operation as well as an optimized and robust unrolling unit made of steel. Process steps at a glance: Feeding of the filter fleece via a web edge control system, as well as the nose wire, uniform welding of the mask with subsequent folding and separation of the base body. The next process step deals with the attachment of the earband using ultrasonic technology. Optionally, a camera inspection, stacking unit, and a tubular bag machine can be ordered separately. Ndsdpfxeh Uuhco Ac Ded In detail: - Welded unwinding unit with a total of 4 manual tensioning shafts, magnetic powder brakes and web guide control system for feeding the filter fleece. - Nose wire is fed in by means of another unwinder. - The use of panes in combination with slim aluminum profiles allows a good insight into the production while at the same time providing full protection for the operator. - We are happy to offer you various printer systems on request to print the legally required information on your mask. - The use of ultrasonic technology and the use of durable materials such as titanium guarantee increased machine availability compared to conventional materials. - High precision through the use of servo-driven motors. - Uniform material feed and material guidance, as well as separation by means of a rotary cutter with lateral marking output. - High-resolution, user-friendly MHI's with touchscreen. - Mask body welding using ultrasonic technology with subsequent folding matrix and welding of the upper and lower surface. - Precise separation of the mask from the marking with the help of a rotary blade, with subsequent ejection of the mask and lateral ejection of the marking. - Subsequent ear band embossing by ultrasonic technology. - Optional: Camera inspection with good and bad detection - Optional: Subsequent output to a stacker. - Optional: Output to a flowpack station for individual mask sealing. Performance data & dimensions: - Power consumption: approx. 4-5 KW during operation - Power connection: 220 V/ 50 Hz - Quantities: 80 masks/min. - Compressed air: 7-10 bar - Weight: approx. 2.5 t - Dimensions: 8200x5000x1800 mm (LxWxH) - Mask dimensions closed (longest and widest point): 205 x 82 mm (+- 2mm) We would be happy to send you an individual, high-quality offer. For this we ask you to give us your company data in advance.

Year of construction: 2009, condition: used, machine/vehicle number: C10030 - 02, 2009, Ndjdpfx Acedtt Ddj Dod 70Kg, digital timers and temperatures, high shear mixer, electrically heated, on stainless mobile skid

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 140 kg, LPG Systems LPG Cellu M 6 Endermolab 1I or optionally 2I Beauty device Body and facial unit (new) Endermolift (Ergolift) Latest global patent for facial treatments Tested by a certified trainer in beauty and therapy Completely refurbished and overhauled Fresh maintenance recently carried out New hose Refurbished KM80 roller head from 2013 New KM70 roller head or therapy head TR50 New KM50 roller head New controller from previous owner Device has been freshly overhauled New valves, new seals, new hose New capacitors, new filter, etc. Original price: 39,980 EUR net Ndsdpfxecgy Hdo Ac Ded Suitable for Endermologie body and Endermologie face treatments Optional upgrade to Ergo Lift patent 2014 for an additional 2,000 EUR Lipo massage and Endermolift technology available Like new and immediately available in Germany Optional delivery and commissioning according to LPG manual guidelines Optional starter package (Bodywear, filters, clamps, flyers) A premium device in the upper class of the medical beauty segment! Not junk like ultrasound or radiofrequency from China – Ergodrive, Ergolift 12-month warranty from date of purchase valid only with a 2-day training course and completion of the final exam Start your Endermologie season now. 100% natural mechanostimulation provides a painless yet intensive treatment. Addictive results—clients come to strengthen and firm connective tissue, reduce cellulite, and men to tighten abdominal areas. My clients typically lose up to 2 dress sizes, and the treatment has been scientifically proven to boost metabolism. Drooping eyelids and double chins can be positively influenced with the Endermolift. This patented system delivers the precision of Swiss watchmaking. For the past 14 years, I have treated and traded with older LPG devices, but the results from the latest generation convinced me to support the new Integral, Endermolab sibling models, and the Alliance. We continue to support you with application questions after purchase. Facts about LPG: 39 years of experience Global market leader in the medical beauty segment European company 175 documented clinical and scientific studies 80,000 devices produced Present in 100 countries 12 million treatments performed 200,000 treatments per day Leasing available from our partner bank E.g., 399 EUR/month Images are for reference; always new devices available You matter to us after your purchase! References available nationwide Clients: Doctors, therapists, cosmeticians, etc.