Escaliers-Charpente

Condition: used, Sawblade tiltable 0 - 45 ° Length of the rolling table 3.200 mm cutting width 1.100 mm Fgedpjxmk A Tjfx Afpoh Motor output 7,5 kW Cutting height 155 mm Cutting height at 45° 110 mm Saw blade diameter 450 mm Speed 3.000/3.600/4.200 U/min. Dust suction hood 1x120 , 1x80 mm

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20-11-14-007, cutting length (max.): 3,430 mm, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, table length: 1,200 mm, Factory-refurbished Altendorf F45 with ElmoDrive control and parallelogram cross-slide! Fjdpsxc Uhfefx Afpjgh TECHNICAL DETAILS Maximum cutting length: 3,430 mm Maximum cutting width: 1,300 mm Saw blade diameter: 500 mm Table length: 1,200 mm Saw blade projection 90° with single-sided tilting: 179 mm 90° with double-sided tilting: 179 mm +45° with single-sided tilting: 123 mm +45° with double-sided tilting: 123 mm -45° with double-sided tilting: 96 mm MACHINE DETAILS Dust extraction connections Extraction at the top: Ø = 80 mm Extraction at the bottom: Ø = 120 mm Vacuum pressure: 1,200 Pa at total suction port, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Reinforced TPL support 1,200 mm On/off switch on DRW Extendable cross-slide extension Front support roller Laser - kerf indicator

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, cutting length (max.): 3,400 mm, cutting width at rip fence: 1,300 mm, table length: 1,200 mm, main saw diameter: 500 mm, power: 5.5 kW (7.48 HP), Equipment: lighting, rotational speed infinitely variable, scorer, Used machine GM010.0369 Year of manufacture: 2021 F45 ElmoDrive Machine height: 910 mm Operation at eye level Template holder directly at the control panel Max. saw blade diameter: 500 mm Motor 5.5 kW (7.5 HP) VARIO 3-axis scorer incl. parking position LED lighting TPL 1200 mm reinforced Fgsdpfxew Inwlo Afpjh Double roller carriage with carriage length 3400 mm Angle-mitre fence DIGIT LD CNC parallel fence 1300 mm Front support roller Laser cut line display

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, cutting length (max.): 3,400 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 500 mm, table length: 1,200 mm, power: 5.5 kW (7.48 HP), Equipment: lighting, rotational speed infinitely variable, scorer, Used machine GM010.0308 Year of manufacture: 2021 F45 ElmoDrive Machine height: 910 mm Eye-level controls Template holder Max. blade diameter: 500 mm Motor 5.5 kW (7.5 HP) VARIO 2-axis scoring unit with tilting LED lighting TPL 1200 mm reinforced Double roller carriage, carriage length 3400 mm On/off switch on double roller carriage WGA Digit L, 3200 mm Fsdpjw Inatjfx Afpegh CNC parallel fence 1300 mm Front support roller

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, cutting length (max.): 3,400 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, table length: 840 mm, power: 5 kW (6.80 HP), Equipment: lighting, rotational speed infinitely variable, scorer, Used machine GM010.0303 Year of manufacture: 2020 F45 ElmoDrive Machine height: 910 mm Eye-level operation Dual-sided tilting (+/- 46°) Max. blade diameter: 450 mm Motor 5.0 kW (7.5 HP) VARIO 2-axis scoring unit incl. park position LED lighting Table extension 840 mm Fjdpfew Im I Asx Afpjgh Double roller carriage with carriage length 3400 mm DIGIT L angle-mitre fence CNC parallel fence 1300 mm Laser-cut kerf indicator

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, cutting length (max.): 3,400 mm, cutting width at rip fence: 1,300 mm, table length: 1,200 mm, power: 5.5 kW (7.48 HP), Equipment: lighting, rotational speed infinitely variable, scorer, Used machine GM010.0277 Year of manufacture: 2021 F45 ElmoDrive Machine height 910 mm Eye-level control Max. saw blade diameter 500 mm 5.5 kW (7.5 HP) VARIO motor 3-axis scorer incl. park position LED lighting Fgodpfx Afew Imxzopjh Table extension 1200 mm Double roller carriage with 3400 mm carriage length PQS-LD central position CNC parallel fence 1300 mm Front support roller

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, cutting length (max.): 3,800 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, table length: 840 mm, power: 6.5 kW (8.84 HP), Equipment: scorer, Used machine GM010.0256 Year of manufacture: 2020 F45 ElmoDrive Machine height: 910 mm Fsdpfxow Imvms Afpogh Eye-level control panel Dual-sided tilting ( + /- 46°) Maximum blade diameter: 450 mm 6.5 kW (8.8 HP) motor 3-axis scoring unit with dual-sided tilt Table extension: 840 mm Double roller carriage, carriage length 3800 mm On/Off switch on double roller carriage Angle and miter stop CNC parallel fence: 1300 mm Laser cut line indicator Spraying device

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, cutting length (max.): 3,400 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, table length: 840 mm, power: 6.5 kW (8.84 HP), Used machine GM010.0217 Year of manufacture: 2020 F45 ElmoDrive Machine height: 910 mm Eye-level operation Dual-sided tilting (+ / - 46°) Max. blade diameter: 450 mm 6.5 kW (8.8 HP) motor Table extension: 840 mm Double roller carriage with 3400 mm carriage length Fodpfx Afow Imrbjpjgh Miter angle stop CNC parallel fence 1300 mm Front support roller STEG, second support on the double roller carriage

Condition: excellent (used), Year of construction: 2018, Panel saw with 3 saw blades, motor power 5 kW, maximum length 300 cm Fedpfx Afowxt R Tjpegh

Condition: used, Year of construction: 2007, ALTENDORF panel saw F45 Equipment package III Year of manufacture: 2007 Fgjdpewq Acpofx Afpeh Equipment - Electromotive height and tilt adjustment 0 - 46° for the main saw blade - F45 screen control - Control panel at eye level with template holder - Double roller carriage 3400 mm - Parallel stop, electromotive adjustment, cutting width 1000 mm - Angle-mitre stop, manual adjustment, with length compensation, cross cuts up to 3200 mm - Drive power 5.5 kW (7.5 HP) VARIO/stepless speed control 2000 – 6000 rpm - Tool clamping system for the main saw blade - Max. cutting height 200 mm, max. saw blade diameter 550 mm - Table extension 840 mm, anodised aluminium - Laser cutting line indicator (laser not working!) - STEG/second support on the double roller carriage - Additional on/off switch on the double roller carriage - Provision for retrofitting a scoring unit - Machine from first owner - Carefully maintained

Condition: used, Year of construction: 1990, with hydraulic height and swivel adjustment Used, good to excellent condition Manufacturer: Panhans Model: 690 Year of manufacture: 1990 Machine no.: 705 GS-tested Upgraded motor 5.5 kW Cutting width approx. 1250 mm Cutting length approx. 2700 mm Max. cutting height 145 mm Swivel up to 45° Fedjwkvwtspfx Afpogh Parallelogram guard Table extension approx. 1000 mm Hydraulic height adjustment Hydraulic swivel adjustment Extraction connection D 120/80 mm Required space approx. 3200 mm x 3500 mm x 1400 mm Weight approx. 1000 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without guarantee or warranty.

Condition: new, - 5.5 kW (7.5 HP), 3 speeds - Motorized height and tilt adjustment - Large protective hood - Double sliding table 3,200 mm - Scoring unit with LED lighting - CNC parallel stop, cutting width 1,000 mm - Angle miter stop 3,450 mm, without length compensation - Table top extension/widening: Proven CDF surface Fodpfowh Unfex Afpegh Further options available upon request!

Condition: new, - 7.5 kW (10 HP), 3 speeds - Motorized height and tilt adjustment - Large protective hood - Double sliding table 3,200 mm - Scoring tool preparation - Parallel stop, cutting width 1,000 mm - Miter stop 3,450 mm, without length compensation - Table top extension/widening: Powder-coated surface Further options available upon request! Fgsdewh Um Uepfx Afpsh

Condition: new, - 5.5 kW (7.5 HP), 3 speeds - Motorized height and tilt adjustment - Large protective hood - Double sliding table, 3,200 mm - Scoring unit with LED lighting - DIGIT X parallel stop, cutting width 1,000 mm - 3,450 mm angle miter stop, without length compensation - Table top extension/widening: Powder-coated surface Fedpfx Ajwh Um Ijfpogh Further options available upon request!

Condition: good (used), Year of construction: 2023, functionality: fully functional, cutting length (max.): 3,700 mm, cutting width (max.): 1,250 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 155 mm, saw blade diameter: 450 mm, table length: 3,700 mm, main saw diameter: 450 mm, height adjustment type: electric, rotational speed (min.): 3,500 rpm, rotational speed (max.): 5,500 rpm, input voltage: 400 V, pivoting range: 45 °, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), sliding table length: 3,700 mm, Equipment: motor brake, scorer, Newly used Felder K945S sliding table saw with 3,700 mm roller table, well equipped and in working order! 3,700 mm X-roll roller table Remote control on/off switch Digital readout window, cutting width up to 1,250 mm PowerDrive K2 pack for height and angle adjustment Scoring unit, electric height adjustment 7.5 hp, up to 450 mm saw blade Scoring unit with its own motor, 120 mm blade diameter Fjdpfjwath Usx Afpegh Narrow and wide hood Swivels up to 45 (45.3) degrees Immediately available from stock.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6700x3350x1500 mm Weight 1000 kg Total power requirement 9 kw Fgodpfxsvz Etmj Afpoh

Condition: good (used), Robland NZ3800 format saw with a trolley Scorer on a separate engine, 380cm trolley length 0-45 tilt electrically adjustable with readout up-down saw electrically adjustable culaga on the right side motorically adjustable, i.e. we enter the dimension and it is set, max 1520mm Fedovyixwepfx Afpjgh 5.5KW main engine 3 cutting speeds A branded machine, technically fully functional, will still fulfill its functions well

Condition: used, Year of construction: 2005, functionality: fully functional, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, table length: 3,400 mm, height adjustment type: electric, power: 5.5 kW (7.48 HP), Panel saw Fgjdpfx Afovnrmyepeh Manufacturer: Altendorf Type: F45 Elmo CE Year of manufacture: 2005 Carriage length: 3,400 mm Cutting width: 1,300 mm Cutting height: approx. 171 mm Max. saw blade diameter: 500 mm Speed: 2,000 - 6,000 rpm Cutting width adjustment: Electric Motor brake: Yes

Condition: new, Year of construction: 2024, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, power: 5 kW (6.80 HP), sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive - Swivel + / - 45 ° - Cutting height 200 mm - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Template holder - On/Off switch on the double roller carriage Fgedpouh R R Ejfx Afpoh - Front support roller

Condition: used, Sawblade tiltable 0-45 ° Length of the rolling table 3.200, 3.800 mm cutting width 1.300, 1,500 mm Fgodpfx Aetg Ailofpeh Motor output 7,5 kW Cutting height 177 mm Cutting height at 45° 133 mm Saw blade diameter 500 mm Speed 3000/3600/4200 U/min. work height max. 870 mm Dust suction hood 1x120, 1x100 mm

Condition: new, Year of construction: 2023, functionality: fully functional, Equipment features: - Sliding carriage made of anodized aluminium, incl. high-precision guide made of hardened and ground steel - Sliding carriage lock in any position - Saw blade guard with swing-away device - Extension arm with adjustable angle stop with length compensation every 5° and at 22.5° - Mitre fence and eccentric clamp - Belt adjustment for speed change from above (opening in the saw table) - Indicator lights for set saw blade speed - 3-axis programming unit via TFT 15'' touchscreen on Windows basis, incl. 2,500 program slots, 2 USB ports and 1 Ethernet network connector - Scoring unit with electromotive height adjustment and motorized axial pulse adjustment, including digital display for height and width and width - Angle stop with 3 stop riders; 2 riders with digital display, 1 rider analog but coupled to a digital rider also digitally adjustable - Upper control panel incl. automatic star-delta start - Electrics and safety devices according to CE standard Technical data: Fjdpfx Afjrrw Ucspogh - Saw blade inclination: 0° to 45 - Table dimensions: 1,030 x 680 mm - Working height: 870 mm - Sliding carriage dimensions: 3,200 x 400 mm - Cutting length with scoring unit: 3,420 mm - Cutting width at rip fence: 1,300 mm - Max. Cutting height with 500 mm saw blade: 90°: 177 mm / 45°: 133 mm - 3 speeds: 3,000 / 3,600 / 4,200 rpm. - Motors: Main saw: 7.5 kW / 10 HP / 50 Hz, scoring saw: 0.55 kW / 0.75 HP - Noise level according to EN 27960: 84.4 - 2565086.3 dB(A) - Extraction nozzle 1 x 120 mm, 1 x 100 mm - Angle fence extendable to 3,400 mm

Condition: used, SECOND-HAND CIRCULAR SAW SCM MOD. SI450 N - Carriage mm. 3800 Fedpfx Afomzbm Rjpegh

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, TECHNICAL DATA - Demonstration machine from showroom Roll carriage length 3200 mm Cutting length 3400 mm Fedpfxegz Hx Do Afpegh Cutting height max. 155 mm at 90° / 105 mm at 46° Cutting width width stop 1030 mm Saw blade max. Ø 450 mm Saw blade can be lowered under table Ø 400 mm Table size cast table top 1200 x 655 mm Table extension plus 750 x 655 mm Table extension 1200 x 655 mm Table height +/- 20 mm 900 mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1051 kg TECHNICAL DESCRIPTION Solid German engineering For trimming, cutting to length, sizing, mitre cutting etc. Dimensionally stable and self-supporting machine body manufactured as a stable welded frame construction made of thick-walled steel profiles, laser-machined sheet steel parts and mechanically processed The torsion-resistant and finely planed cast table top is mounted on the machine body The robust and powerful saw unit installed in the machine frame guarantees precise saw cuts The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the entire length, guided by hardened and and ground round steel guides with remote locking at 50 mm intervals Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening Extendable up to 250 mm on the wide side Length stop on the cross slide with mm scale and telescopic extension, extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre stop on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) are can be quickly set via a fixing system Width stop with cutting width 1030 mm to the right of the saw blade with fine adjustment, easy to adjust and fix manually, dimension display via easy-to-read mm measuring scale on adjustable ruler holder Table extension 1200 x 600 mm and table extension 750 x 655 mm Operation on the machine body with 4.3" touchscreen control for cutting height, swivel adjustment and speed Electromotive height and tilt adjustment via touch button Swivel range of the saw blade from 0° - 46 APA saw blade quick clamping system Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Safety guard can be swiveled to both sides, safety hood with interchangeable wide/narrow insert for saw blades up to Ø 450 mm Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400 mm can be lowered under the table Extraction nozzle Ø 120 mm on the machine body, Ø 80 mm on the protective hood Roller carriage, length and width stop profile anodized CE-compliant GS tested

Condition: new, Dimension of sliding table- 3800x375mm Gross cut capacity- 3800mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 125 mm Height of cut (45°) - 115mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Fjdpfxsdd Dzuj Afpogh Tilting saw blade - 0-45º Main motor - 5,5 Kw Saws lifting, up and down, electrical control. Scoring saw blade diameter - 120mm Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Transport dimensions - 3800x1000x1100mm Weight - 820 Kg (EXW Jonava, Lithuania)