MJ motors

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100.06238, functionality: fully functional, hydraulic forging hammer (H2) Manufacturer: LASCO Type: HO - U 630 SO Year of manufacture: 2008 Impact energy: 63 kJ Impact frequency: approx. 85/min Ram speed: up to 5 m/s Ram stroke: 520 to 760 mm Ram depth: 750 mm Bwodpsziw Nljfx Ai Hep Ram weight: 4,300 kg Central lubrication with hydraulic oil Filter circuit with cooling

Condition: used, Year of construction: 2002, operating hours: 50,000 h, functionality: limited functionality, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 840 mm, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machine = Mazak VTC 300 C / Year of manufacture 2002 / Control system: Fushion 640 M Operating hours = 47,961 hours Travel distances = X = 1740 mm / Y = 760 mm / Z = 840 mm Spindle = SK40 / 12,000 rpm / 30 tool positions Tool magazine Bwsdpfxjziw I Ij Ai Hjp Includes Renishaw probe, and a set of tool holders can be included. One power component is defective due to severe weather. Otherwise, everything is ready for operation. The machine is being sold due to a lack of orders.

Condition: new, functionality: fully functional, mileage: 100 km, Year of construction: 2026, Equipment: air conditioning, Mixing drum: • Nominal capacity: 10 m3 • Geometric volume: 17.26 m3 • Water line volume: 10.79 m3 • Filling level: 62.6% • Inclination: 11.2° Drum and mixing blades made of high-wear-resistant 4-5 mm Strenx 700 steel. Mixing blades with additional edge protection. Hydraulic motor: Bosch Rexroth Hydraulic pump: Bosch Rexroth (standard equipment) Mixer gearbox: ZF, type 5300 Bjdpfxjziw Izo Ai Howp MERCEDES BENZ 3746B AROCS Axle load: 7.5 t - 7.5 t – 13.0 t – 13.0 t Wheelbase: 4.25 m

Condition: new, functionality: fully functional, mileage: 100 km, axle configuration: 10x4, emission class: euro6, Zoomlion 50X-6RZ concrete pump truck: for sale / lease purchase / rental Bwsdpfxoziw Iuo Ai Hjp Distributor boom: Outreach m 50 Boom type / articulation type 6-section RZ boom Gross reach 44.3 m Depth reach 35.30 m Unfolding height 13.80 m Delivery lines type DN 125, max 85 bar Length of end hose 3 m Swivel range 365 degrees Pumping unit: Max. output 170 m3/h Pressure at ground level 85 bar Delivery cylinder 260 mm Stroke 2100 mm Strokes per minute 25 Outrigger system: Full outriggers front and rear m 9.31 and 10.50 OSS m 5.90 and 6.12 FS m 2.18 - 9.31 m; 2.18 - 10.50 m Overall length 12.36 m Height 3.939 m Configurations: Diesel tank in outrigger 1,000 liters Water tank 550 liters Water pump liters/bar 70/15 with hose reel High-pressure pump liters/bar 15/200 with hose reel Delivery cylinder - hard-chromed Hopper with vibrator and covered with aluminum cover Wear plate, carbide S pipe Wear-resistant Double-walled pipeline End hose clamp Storage option: Hoses or pipes, aluminum trays on both sides on the rear outriggers Outrigger aids 8X square timbers with storage option on the rear outriggers, remote control 2X HBC Safety: Fully flexible outrigger monitoring Warning light in the danger area 360 degree camera system Emergency pump control Boom package with vibration damping (EBC) Raising and lowering with one joystick, boom control with one joystick Various pump system controls Chassis Daimler Benz Type 4851 Axle ratio 10x4 Wheelbase mm 4850

Condition: used, mileage: 15,000 km, Year of construction: 2023, Betonstar BST51.20-5RZ, year of manufacture 2022 German registration First owner Bwsdpoziw Ihjfx Ai Hop As new 200 m³/hour 10x4

Condition: used, Year of construction: 2011, Available immediately from university stock: CNC vertical 4-axis simultaneous machining center VF 1 – HE Full-fledged 4th axis and Haas rotary table HRT 160 Year of manufacture: 2011 Table size: 900 x 450 mm Travel distances: 500 x 400 mm SK 40 tool holder 20-position tool changer Spindle power: 15 kW Spindle speed: 7500 rpm Bodpfsziw E Hjx Ai Hswp Electronic multi-function handwheel on the control panel Coolant system Chip conveyor 4th axis fully functional, programmable to 0.001 degrees HRT-160: Detachable rotary table with a 160 mm clamping surface Programmable PCOOL additional coolant nozzles

Condition: used, Year of construction: 2015, functionality: fully functional, Hard Metal Carbide Grinding Lapping Machine Magnetic base Fully PLC controlled Bodpeziw Eajfx Ai Hewp Grinding Length Capacity 600 mm Grinding Motor 2.20 kW / 3 hp External Diameter of Grinding Wheel 150 mm / 6” Grinding Wheel Speed 3450 rpm Feed/Pump Gear Motor 0.25 kW / .3 hp Grinding Wheel Feed per Stroke Manual 0.05 mm Coolant Pump Capacity 20 L/min Magnetic Chuck Width 90 mm / 3.5” Carriage Feed Speed 1.0 mpm Electrics 400/3/50

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demonstration machine, few operating hours. 3.7 kW motor for high material removal rate, robust design, suitable for continuous commercial use. Steel drums with hard rubber coating for perfectly flat, smooth surfaces. Independently adjustable rear drum for controlled material removal. Two-stage feed gearbox for adaptation to different types of wood. Heavy-duty feed table made of gray cast iron, precisely guided by four spindles. Drum hood with double dust extraction connection and guide plates for efficient dust removal. Digital height indicator for quick and safe adjustment to the desired dimension. Abrasive belts with 75 mm and 100 mm width can be used. Technical data Feed motor: 0.18 kW Scope of delivery 80 grit abrasive belt mounted on the drum Bjdpfjziw Afjx Ai Hjwp 100 grit abrasive belt mounted on the drum Height crank, operating manual and spare parts list.

Condition: as good as new (ex-display), Year of construction: 2025, power: 7 kW (9.52 HP), input voltage: 400 V, cutting height (max.): 136 mm, cutting width (max.): 900 mm, saw blade diameter: 400 mm, height adjustment type: electric, overall weight: 690 kg, Equipment: saw blade guard, scorer, Exhibition machine; Art. No. 5504933 with special equipment; fence frame with CompeX device, digital display for width stop. Holzkraft minimax si 4 - 400 / 32 M A, manufacturer SCM Group, Bsdpsziwz Usfx Ai Howp Cutting length 3200 mm, cutting height 136 mm, saw blade 400 mm, 7.0 kW motor, scoring saw with its own motor, motorized height adjustment and pivoting of the saw unit. Saw blade speed adjustable in two stages, on/off switch integrated in the sliding carriage, practical saw blade pendulum guard.

Condition: used, mileage: 343,849 km, power: 353 kW (479.95 HP), first registration: 04/2021, fuel type: diesel, tire size: 315/60 R22,5, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 5,800 mm, total width: 2,500 mm, total height: 3,300 mm, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electric window regulation, power assisted steering, second fuel tank, = Additional options and accessories = - Aluminum fuel tank - Air conditioning - Air suspension - Radio/CD player - Sleeper cabin = Additional information = Bedpfsziwzzsx Ai Howp Front axle: Tire size: 315/60 R22.5; Steered; Suspension: Air suspension Rear tire size: 295/60 R22.5 Unladen weight: 7,403 kg APK (mandatory periodic vehicle inspection): valid until 02/2027 Reference number: 47

Condition: used, mileage: 403,997 km, power: 353 kW (479.95 HP), first registration: 04/2021, fuel type: diesel, tire size: 315/60 R22,5, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 5,800 mm, total width: 2,500 mm, total height: 3,300 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, power assisted steering, second fuel tank, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Roof spoiler - Radio/CD player - Sleeper cabin - Immobilizer = Further Information = Front axle: Tire size: 315/60 R22.5; Steerable; Suspension: Parabolic spring suspension Rear axle: Tire size: 295/60 R22.5; Suspension: Air suspension Unladen weight: 7,403 kg APK (Technical Inspection): valid until 02/2027 Bodpfx Aieziwzuj Hswp

Condition: good (used), 2 pcs. AMF grid panel, 415 mm x 740 mm, height 50 mm. Bjdoziwzhepfx Ai Howp Grid: 40 x 40 mm, with 16 H7 pilot holes and M12 threads. With cast support under the panel, height 100 mm.

Condition: ready for operation (used), Year of construction: 1991, Turning lathe, VOEST-ALPINE-STEINEL, Type: DA 180, Year of manufacture: 1991, with 2-axis digital display ELESTA. Center height: 180 mm Bwjdpfx Aoziwy Roi Hsp Distance between centers: 1000 mm Spindle bore: 52 mm Spindle speeds: 44-2000 rpm Chuck diameter: 200 mm, Tool holder: MULTIFIX - B. In ready-to-use condition.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 1,450 h, load capacity: 200 kg, empty load weight: 5,450 kg, fuel type: electric, JLG Toucan 1210. Year of manufacture: 2013. Bwjdpfxjziwy Ds Ai Hep Working height: 12 meters. Lateral reach: 5.2 meters. Platform capacity: 200 kg. Weight: 5450 kg. 24-volt batteries with built-in 230-volt charger. In good working order. Video also available on WhatsApp. Price: net + 21% VAT or net for export.

Condition: used, Year of construction: 2002, Rico Unpacking System Varia with S7 control The machine is dusty but in good condition. Bjdpfjziwyqex Ai Hswp

Condition: used, Dimensions: 6.0 x 2.48 x 2.50 [m] Bedpfxsziwyks Ai Hjwp

Condition: excellent (used), For sale: a glue roller from Karl Tränklein, a renowned German manufacturer of bookbinding machines. This device is designed for the precise and uniform application of glue to paper, cardboard, corrugated board, veneer, and other flat materials. The machine is equipped with an electric drive, a metal working roller, and adjustable glue application settings, allowing the operating parameters to be adapted to the type of material being processed. Its robust, heavy-duty construction ensures stability and long-term durability. Technical specifications: Manufacturer: Karl Tränklein Country of origin: Germany Type: glue roller / applicator Drive: electric Power supply: 400 V Adjustable glue application Bwsdpeziwx Tofx Ai Hop Metal working roller Work table with guides Drip tray for excess glue Heavy-duty, robust construction Applications: bookbinding, printing, packaging production, gluing paper, cardboard, and corrugated board, applying glue to veneer and other flat materials. Condition: used, fully functional. It shows normal signs of wear and tear from use. The visual condition and completeness are consistent with the photos.

Condition: excellent (used), Year of construction: 2019, Pack-Tec inline palletizer, year of manufacture 2019 Bodpfx Aijziwx Ho Hewp Handles 6, 12, and 20 crates. Requires minimal floor space.

Condition: excellent (used), For sale: a Tünkers roller laminator designed for the uniform application of adhesive to paper, cardboard, corrugated board, and other flat materials. This machine is used in bookbinding facilities, printing houses, packaging production plants, and during laminating and coating processes. The machine is equipped with a Hitachi X200 frequency inverter, which allows for smooth adjustment of the roller speed and adaptation of the operating parameters to the type of material being processed. Its robust, industrial design and precise roller arrangement ensure even distribution of adhesive across the entire working width. Bwodpfx Aoziwxysi Hjp Technical data: Manufacturer: Tünkers GmbH Country of manufacture: Germany Type: roller laminator / adhesive application machine Electric drive Speed control via Hitachi X200 frequency inverter Motor with PTC thermal protection Metal work table Adjustable roller pressure Machine number: 12/201118/28 Applications The device is intended for: applying adhesive to paper and cardboard, laminating paper onto corrugated board, laminating materials, gluing veneers, packaging production, bookbinding operations, printing applications. Included in the set: Tünkers roller laminator, Hitachi X200 frequency inverter, wiring, components visible in the photos. Condition The device is used and shows normal signs of wear. It is sold in the exact condition and with the complete set of components as shown in the photos.

Condition: excellent (used), functionality: fully functional, Manufacturer Julius, type AH 41 Inner coil diameter from 250 to 300 mm Bwedsziwxtepfx Ai Hep Max. width 295 mm With brake Good condition, ready for immediate use

Condition: excellent (used), For sale: Bernardo KFM 500 M edge chamfering machine, designed for precise chamfering and deburring of parts made of steel, stainless steel, aluminum, and other metals. This machine is ideal for preparing parts for welding, removing sharp edges, and creating even chamfers. Its robust construction and adjustable chamfering angle ensure accurate and repeatable machining. The machine is sold with the operating manual and a set of cutting blades, as shown in the pictures. Technical data: Manufacturer: Bernardo Country of manufacture: Austria Model: KFM 500 M Year of manufacture: 07/2019 Machine number: PWA-190707 Type: edge chamfering machine Motor power: 0.55 kW Power supply: 400 V Frequency: 50 Hz Rated current: 1.48 A Recommended protection: C16 Weight: 33 kg Application: The device is designed for: chamfering edges, deburring parts, preparing material for welding, machining steel, stainless steel, and aluminum, creating precise chamfers for welds. Included: Bernardo KFM 500 M chamfering machine, operating manual, set of cutting blades (shown in the pictures), other items shown in the pictures. Condition: Bjdoziww Nopfx Ai Hswp The device is used and in good visual condition. Normal signs of wear and tear are visible, consistent with its use. The machine is sold exactly as it is and with all the components shown in the pictures.

Condition: excellent (used), functionality: fully functional, Like-new, guaranteed heavy-duty basic shelving unit with an electric roller shutter. It has a few minor dents and scratches. Consisting of: - 1x heavy-duty basic shelving unit with 2 column frames with 100% pull-out base, usable depth 950 mm, height: 2000 mm - 2x multi-part side panels, usable depth 950 mm, suitable for shelf height: 2000 mm - 3x shelf panels, 12 mm beech multiplex, for shelf field, usable depth: 950 mm - 1x roller shutter for basic shelving unit, usable depth 1350 mm, suitable for shelf height: 2000 mm New price: €11,019 (gross) The stated price is the gross price. Sale only with invoice and VAT shown. Inspection possible at any time by arrangement. Shipping possible with cost assumption. We can assist with loading using a forklift for self-collection. Bwodpfoziwwcsx Ai Hsp

Condition: like new (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, overall weight: 850 kg, type of input current: three-phase, Manual Lisec 2k sealing machine for Polisulfide, year 1998, will be competely overhauled prior delivery (will look and work as new). Bodpfxsziwv Es Ai Hewp The overhauled machine will be available from end of July and can be seen in our warehouse in Oroahsza/Hungary. The machine is now running on PS but can be modified to Silicone on demand as an option.

Condition: excellent (used), LINX 6900 P690 CIJ 2008 Bwodpoziwvxjfx Ai Hsp

Condition: like new (used), Year of construction: 2005, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Manual Lisec 2-k sealing machine TAL-50PS/B for Polysulfide. The machine is completely overhauled and therefore in excellent condition. As new. power: 3N/PE 400V 50Hz Load: 5,4kW The machine can be seen in our overhaul warehouse in Oroshaza/Hungary on appointment. Bodpfx Aieziwvro Hjwp