Serdar Topbaş Maki̇neki̇mya Ltd Şti̇

Condition: excellent (used), Year of construction: 2005, Capacity: 1,000 liters Heating power: 52 kW Cooling capacity: 9.9 kW Ultrasonic device rated power: 3 kW basket sizes: 520 x 350 x 200mm (L x W x H) 520 x 720 x 180 mm (W x L x H) Fodsxg Hf Dopfx Afpjgh Detergent: Per Equipment: various charge baskets

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 07/018, overall weight: 2,900 kg, inner diameter: 2,500 mm, temperature: 65 °C, heating capacity: 4 kW (5.44 HP), load capacity: 1,500 kg, Equipment: documentation/manual, Cleaning System Type W 250 Used, low operating hours Available immediately. Useful dimensions: • Basket diameter: 2,500 mm • Usable internal height: 1,200 mm • Basket load capacity: 1,500 kg With the following features: • Washing • Rinsing • Hot air drying 2 x 10 kW • Plate phase separator for oil removal • Automatic filling device • Chip filter with lye cover plate • Indirect bath heating stainless steel/ceramic • Vapor extraction • Rinse water extraction • Automatic pumping system with floor flushing • PLC with operator panel • Pull-out washing basket with transport trolley Current new price: approx. €160,000.00 Fedpsxgcx Tjfx Afpogh Offer price: €70,000.00 Unpacked, ex works Bad Salzuflen. Payment: Due immediately, net.

Condition: good (used), Year of construction: 2011, Cleaning System Mafac KEA TECHNICAL DATA Manufacturer: Mafac Model: KEA Year of manufacture: 2011 Medium tank capacity: 320 l Load capacity: 100 kg Heating power: 18 kW Maximum temperature: 75 °C Connection: 400 V / 50 Hz / 21 kVA Fsdpfx Afoxflp Espjgh Main fuse: 35 A Spray pressure pump power: 2.2 kW Spray pressure pump flow rate: approx. 200 l/min Spray pressure pump pressure: approx. 2.0 bar Reinforced pump power: 3.0 kW Reinforced pump flow rate: approx. 210 l/min Reinforced pump pressure: approx. 4.2 bar Medium heating time 20–60 °C: approx. 1.5 h Warm air impulse blow-off system temperature: < 45 °C Warm air impulse blow-off system flow rate: approx. 3000 l/min Hot air drying heater: 8 kW Hot air drying flow rate: 160 m³/h Hot air drying outlet temperature: max. 80 °C Main stream fine filtration: 0.16 m² / 100 µm Basket filter: 0.125 m² / 150 µm Usable chamber size: 400 x 600 x 288 mm External dimensions: 950 x 1200 x 1990 mm Weight: approx. 480 kg SCOPE OF DELIVERY Includes (not limited to): - Mafac KEA cleaning system - Baskets - Operating documentation Exact scope of delivery according to photo gallery The Mafac KEA is a high-performance cleaning and drying system for industrial applications. With a tank capacity of 320 liters and a load capacity of 100 kilograms, it is ideally suited for cleaning workpieces of various sizes. The machine operates with 18 kW of heating power and achieves a maximum temperature of 75 °C, which ensures reliable removal of even demanding contaminants. Thanks to spray pressure pumps with up to 4.2 bar pressure and integrated warm and hot air drying systems, it delivers excellent cleaning results and ensures rapid drying. Its compact design, with a usable chamber size of 400 x 600 x 288 mm and external dimensions of 950 x 1200 x 1990 mm, allows efficient integration into production environments where space is at a premium. With robust construction and practical features, the Mafac KEA offers a durable and efficient solution for workpiece cleaning. No guarantee is given for the accuracy, completeness, or up-to-dateness of the information provided.

Condition: used, TECHNICAL DETAILS - Supply voltage : 400 [V] - Rated current : 49 A - Frequency : 50 Hz - Power : 27 [kW] - Max. Temperature : 80 [°] - Capacity : 650 [l] - Number of tanks : 2 - Inside dimensions : 500x650x300 [mm] - Machine floor space : 1600 x 1900 [mm] Fsdexb Enaspfx Afpegh - Machine height : 2000 [mm] - Machine weight : 870 [kg] EQUIPMENT - CNC : Siemens

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: A00.5392, total length: 10,600 mm, total width: 2,680 mm, total height: 3,190 mm, input voltage: 230 V, power: 45 kW (61.18 HP), Markert continuous washing system for washing and drying parts (e.g., metal cleaning) - Fully functional - Year of manufacture: 2000 - Designed for washing parts in baskets - Suitable for use with alkaline or neutral cleaning agents - Drying via circulating air at 20°C - Exhaust air managed by steam condenser, 4500 m³/h Scope of delivery includes: 3 folders with technical documentation, operating manuals, drawings, etc. (all original from Markert) Please submit a purchase price offer for the machine. Fgedpfxjxb Dcvo Afpoh

Condition: used, Year of construction: 2015, Dimensions (L/W/H) ca. 4020 x 2460 x 2600 mm total power requirement 78 kW filling amount 1200 l carrying capacity max. 0,5 bath temperature 65 °C heating capacity 54 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Fgjdpfoxbtryox Afpeh Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, functionality: limited functionality, - Crate washing machine for sale Fgsdpsw S Hrcsfx Afpeh - Eurofins product certificate - Operating manual and spare parts catalogue available

Condition: good (used), Year of construction: 1997, Rust size: 700 x 650 x 1.100 mm (W x H x L) Fgjdpfx Afew R Swbopoh batch weight: 350 kg heating: electrical, 70 kW temperature: max. 80°C

Condition: good (used), Year of construction: 2007, Connected load: 75 kW Control system: Siemens Simatic Panel Touch Cleaning agent: aqueous cleaning agents Filling capacity: 1,070 l Loading/unloading by roller conveyor system, approx. 400 mm, roller width 600 mm Loading conveyor, discharge conveyor with cooling section, removal station, with transfer unit Removal / control station f. Oil separator Fsdpfjw R Svqsx Afpegh

Condition: good (used), Year of construction: 2003, Well-maintained perchloroethylene washing system, Washing cycles: pre-wash and main wash, Steam degreasing and conservation one additional tank, Useful dimensions: l 530 x w 320 x h 200 mm, Voltage: 400V 50 Hz Power requirement: 58.5 kW, Accessories: 1 - Air-cooled, 3rd bath as conservation bath, 2 - Adjustable turbulence-immersion washing system, 3 - Basket rotation device, basket clamping device, 4 - Acid detector for LM Per, exhaust-free with activated carbon, 5 - Automatic dual-track loading system, 6 - Batch preselection for up to 20 washing programs, 7 - Filter-in-filter for pre-wash bath, Dimensions/weight Fgodpew I Exyjfx Afpjh Washing unit: L 4.40 x W 2.20 x H 2.40 m, Weight: 6000 kg automatic loading: 3.90 x 1.40 x H 1.40 m, Weight: 700 kg, Additional tank: 2.20 x 1.20 x 1.40, weight 800 kg

Condition: used, TECHNICAL DETAILS - Total power : 16/8.8 [kW] - Total installed power : 17 [kW] - Washing tank : 535 x 320 x 200 [mm] - Solvent : A3 - Automatic loading Fgedpfjw H Dviex Afpoh - With ultrasound - Continuous distillation - Machine floor space : 2500 x 1800 [mm] - Machine height : 3500 [mm] - Machine weight : 2200 [kg]

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 206348, input voltage: 36 V, 2015 RCM Tera Industrial Floor Cleaning Machine • Model: TERA 1303 – 2WD • Cleaning width: 130 cm (3-disc brush system) • Drying width: 136 cm • Tank capacity: 280 L fresh water / 280 L dirty water • Power source: 36V battery system (525Ah, with automatic water filling) • Operating time: approx. 7 hours (on one charge) Fgjdpfx Ajw Hhw Djfpeh • Driving speed: 9 km/h (forward), 4.5 km/h (reverse) • Machine weight: approx. 1,600 kg (with battery and filled tank) • Condition: Maintained, ready for operation

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Washing System We offer a used industrial washing system KITZINGER Contino 452-22, manufactured in 2021. The device is characterized by low energy, detergent and water consumption and excellent cleaning results. It is ideal for food processing plants, ensuring effective and quick cleaning of transport crates and reusable containers. Technical specifications: Manufacturer: KITZINGER Model: Contino 452-22 Year of manufacture: 2021 Efficiency: 600-800 pcs/h Fgedpfx Afjw A I A Sjpsh Power supply: 400V AC 3~ / 50Hz Installed power: 70 kW Control voltage: 24V DC Dimensions: length: 10m, width: 1.10m, height: 2.20m Advantages of the KITZINGER Contino 452-22 washing system: High performance – ideal for continuous operation Easy to operate and clean after washing. Energy-efficient and modern technology Easy integration into the production line High hygiene standard – meets food industry standards The machine is in very good technical condition and ready for operation. An excellent choice for companies looking for reliable solutions for automatic crate washing. ADDITIONAL EQUIPMENT - Dryer - Storage for E2 boxer - Automatic transport conveyor system to washer and from washer to drying section and storage

Condition: repair required (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 04.184.921, total length: 1,800 mm, total width: 1,400 mm, total height: 1,850 mm, overall weight: 1,700 kg, temperature: 75 °C, heating capacity: 26 kW (35.35 HP), load capacity: 100 kg, empty load weight: 950 kg, There is a maintenance backlog amounting to €16,640.00 net, according to the offer from MAFAC (including new control system). A retrofit would have been generally considered by us, with estimated costs ranging from €45,000.00 to €55,000.00 (including all parts, assembly, and painting). The new price of a comparable machine, depending on the equipment, is between €100,000.00 and €170,000.00. However, due to technical requirements, we have decided to purchase a continuous flow washing machine. Fjdpfx Ajwx Hpvofpegh

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: A-200711, total length: 2,450 mm, total width: 780 mm, total height: 1,150 mm, input voltage: 220 V, A washing system for anilox rollers and sleeves is for sale. Further information can be found in the photos. Fgodpfxoww Tzio Afpeh

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, inner dimension length: 6,000 mm, inner dimension width: 4,500 mm, inner dimension height: 2,200 mm, input voltage: 230 V, type of input current: AC, input frequency: 50 Hz,

Condition: like new (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 9850, total length: 7,500 mm, overall weight: 900 kg, input voltage: 400 V, Equipment: documentation/manual, Sale of an LCT T 600 demonstration pass-through washing system from 2024 at a special price Zones of the pass-through washing system: Zone 1: Main washing zone: Length: approx. 2600 mm Pump: 7.5 kW, 60 cbm/h Tank capacity: approx. 400 l Water heated with 3 electric screw-in heaters each 10 kW Operating washing temperature: approx. 60° C Zone 2: Rinse zone Length: approx. 2200 mm Pump: 3 kW, 33 cbm/h at 3 bar Tank capacity: approx. 350 l Water heated with 2 electric screw-in heaters each 10 kW Operating washing temperature: approx. 60° C Fgodpfowpq Evjx Afpsh Zone 3: Hot air drying zone: This serves for all-around mechanical air blowing (from below, the sides, and above) of the water droplets located on the surface of the washed goods, which are blown off by air knives and built-in high-pressure fans. The conveyor belt is equipped with a plastic belt. The frame is made of stainless steel 1.4301, has its own drive, and is controlled via the system’s PLC control. The conveyor belt brings the washed goods out of the machine, makes a 90° curve to the left, and then conveys the goods towards the machine entrance (where the items to be washed are placed on the machine). There are 3 photoelectric sensors at different points on the conveyor belt, equipped with special holders and mutually facing reflectors on the stainless steel structure. Belt width 400 mm / height up to 400 mm (At the beginning – 1 sensor before the curve, 1 sensor at the end, and 1 sensor approx. 2 m before the end) is a buffer zone (1-2 m long). As soon as the buffer zone is filled with returning washed goods, the machine and the conveyor belt stop automatically.

Condition: used, PLC contorolled parts washer equipment with air handling unit. With solvent regeneration funcion. It can use various types of solvents. Adjustable cycle time. Multiple washing technologies (fixed, rotary basket) Work space volume: 290 ltrs Max piece weight: 150 kg Electrical power: 400 V, 50 Hz For more information call us or send a message. Fsdpfx Aswpp Icefpegh

Condition: used, Year of construction: 2021, functionality: fully functional, Cleaning device, user-friendly Adjustable pressure regulator Especially for water-soluble materials. We have several cleaning devices. Price is negotiable. Fsdpfx Aownbmzofpogh

Condition: excellent (used), PEBOCK Meat Bin Washer B42.1-MRD is a high-performance industrial bin washer designed for automatic cleaning of meat bins used in food production environments. With a powerful spray system and durable stainless steel construction, this washer ensures effective cleaning and sanitation, meeting the strict hygiene standards of the food industry. Technical Specifications: Model: B42.1-MRD Manufacturer: PEBOCK Total Power: 17.43 kW Power Supply: 3x380V / N / PE Fgedpfewmn Aaox Afpoh Current Consumption: 35 A Construction: Acid-resistant stainless steel Applications: Cleaning bins, 30 pcs/h Industries: Meat, fish, dairy, and general food processing ✅ Key Advantages: High washing efficiency – removes even stubborn contamination Robust and reliable – built for intensive, continuous operation Energy and water efficient – optimized for low operating costs User-friendly operation – intuitive control panel and easy maintenance Hygienic design Ideal for medium and large production facilities PEBOCK Meat Bin Washer B42.1-MRD offers a professional and dependable solution for automated cleaning, helping food processors improve hygiene, save time, and reduce manual labor.

Condition: excellent (used), Year of construction: 1990, 1 x Immersion Washer Franco/Walter Franke Profi 3000 Year of manufacture: approx. 1990 Crate dimensions: 520 x 330 x 210 mm (larger or smaller available) With 2 different crates. The machine can be viewed in operation. Fsdpfx Afswk Iuwopsgh

Condition: used, Year of construction: 2000, workpiece weight per basket 250 kg basket dimensions max. mm voltage pneumatisch weight of the machine ca. 400 kg Fjdswhqu Ijpfx Afpegh dimensions of the machine ca. 1,35 x 1,50 x 2,35 m

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, total length: 2,420 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 1,200 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 5 bar, compressed air connection: 6 bar, maximum load weight: 350 kg, cage diameter: 1,180 mm, We are selling a like-new Laborex dual-chamber parts cleaning system, ideal for maintenance operations but also suitable for all other cleaning tasks. Type: Loborex R-12-RVS-W/E-2T Two-chamber system with washing and rinsing functions with forced-air drying (cold air); a heating cartridge can be retrofitted. Transport trolley for easy loading and unloading. Pneumatic lid opening via button. Pneumatic switching from washing to rinsing. Siemens KTP 400 control system, see image. 2 x 2 filter pots for dirt collection integrated in the return line (wash tank and rinse tank). Machine dimensions: 2300 x 2420 x 2500 mm (width x depth x height). Basket diameter: 1180 mm. Useful height inside: 500 mm. Wash tank capacity: 560 liters. Rinse tank capacity: 130 liters. Voltage: 400 volts. Maximum power consumption: 23 kW 38 A. Compressed air: maximum 10 bar, minimum 6 bar for controlling the lid and slide valve (changing from Washing on rinsing) Water connection 1/2" maximum pressure 6 bar Drain 2 x 2" (wash tank / rinse tank) Wash pump pressure 5 bar Fgedpfx Aswglfrefpsh Rinse pump pressure 2 bar Built in 2023, only used as a demonstration unit, thus in completely new condition 2 large maintenance hatches for wash and rinse tank Steam extraction system Detergent dosing can be retrofitted upon request System can be delivered and commissioned upon request Complete operating instructions, circuit diagram, and spare parts list included

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Pure water RKA-600 reverse osmosis system RO 250/75 CP213e Fsdswar Exopfx Afpogh Newly developed glass types and sophisticated rinsing processes require a high level of process engineering expertise in water treatment. Perfectly coordinated process combinations, such as particle filtration, softening, reverse osmosis, ion exchange, ultrafiltration or electrodeionization (EDI), ensure consistently high water quality. Over and over again. Reverse osmosis - Reverse Osmosis (Reverse Osmosis System) Person with headset icon service Trade fairs & events Sheet of paper with arrow pointing down Downloads Light bulb icon Customer solutions Water treatment based on the model of nature: reverse osmosis The experts at EnviroFALK develop reverse osmosis systems, also known colloquially as reverse osmosis systems or simply RO, which are optimally adapted to the various areas of application. The desalinated water is required for industrial processes as well as for applications in hospitals, laboratories and medical technology. Graphic reverse osmosis How reverse osmosis works – RO Reverse osmosis (reverse osmosis system) is based on the effect of osmosis, which can be seen in nature, for example, in burst cherries after a summer rain. The cherry contains a concentrated solution, the cherry juice. The raindrop represents the diluted solution. The skin of the cherry now equalizes the concentrations. The solvent enters the cherry through the cherry skin, the semi-permeable membrane. The system strives to achieve a balance between the two concentrations. However, as the volume of the cherry cannot increase, the pressure rises. This pressure is the osmotic pressure. In nature, this increase in pressure causes the cherry to burst. If this effect is reversed, the result is a reverse osmosis system. Pressure is exerted on the concentrated solution in order to overcome the osmotic pressure of this solution. The solvent passes through the membrane again and all dissolved water components remain on the concentrate side. Reverse osmosis water filter (Reverse Osmosis – RO) Reverse osmosis (reverse osmosis system), also known as reverse osmosis (RO), is a membrane process that retains ions as well as particulate substances in the water. This reverses the natural process of osmosis. In reverse osmosis systems, the saline solution (e.g. softened city water) is passed under pressure through semi-permeable membranes in the form of winding elements. Only the solvent, i.e. pure water, passes through the membrane and is obtained with a very low salt content as so-called permeate. All water components are concentrated and must be discharged to the sewer with a second partial flow, the concentrate. Reverse osmosis system (RO) On a large scale, a reverse osmosis system (RO) is not operated as dead-end filtration, but as cross-flow filtration. The raw water supply is divided into a pure water – the permeate with a proportion of 75-80% and a residual salt content of approx. 2% – and a concentrate, with which all other water constituents are continuously discharged from the reverse osmosis system. Reverse osmosis is often used in ultrapure water systems for green hydrogen production. It goes without saying that EnviroFALK water treatment systems are tailored precisely to your glass washing machines, the glass to be processed and the glass throughput

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 14722, ​DÜRR Ecoclean Universal 71C is an industrial cleaning system designed for effective degreasing and cleaning of components. Fgsdpfxov U Emaj Afpoh