Used Bosch Drilling for sale (498)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, 1 used feedwater tank ----- Thermal feedwater degassing system insulated, cylindrical, with degassing dome, sludge collection tank with base frame and platform Type: FT 1.5 Manufacturer: BOSCH Operating pressure max.: 0.5 bar Hedpfx Aqozz I N Hsgofn Test pressure: 2.0 bar Temperature max.: 110°C Water content when full: 1,500 l Year of manufacture: 12/2016

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: Hodpfezp Rmqjx Aqgjfn - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: good (used), Bosch DMA 140D 3301-D, 1070077623-208, 670V-705V, 140A *NP: €13554,- Item condition: Used, in perfect condition. R10B2_EK (BOR) You can find more operator panels – new and used – in our shop! International shipping costs available upon request! Hfjdpeyffq Refx Aqgjn

Condition: ready for operation (used), functionality: fully functional, For sale is a special-purpose machine—a complete production line for manufacturing heating elements. The production line was designed and built by Bosch itself. The heating elements are suitable for use in instantaneous water heaters. You can see an image of these elements in the second picture of the gallery. The production line also includes a testing station. According to our checks, all required documentation is available. Transport and loading can be organized throughout Europe for an additional charge upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team looks forward to assisting you. Hedezvfiyjpfx Aqgefn Machinery Buying / Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, ETC. Are you looking for a high-quality yet cost-effective machine for your production? Or are you looking to sell your equipment? For more information or contact options, please reach us via the contact form.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 13459-01, input voltage: 400 V, input frequency: 50 Hz, The Bosch TFA 242 is a fully automatic thermoforming, filling, and sealing machine (FFS) designed for aseptic applications. The system is primarily designed for filling and packaging coffee creamer into single-serving cups. Technical data and performance characteristics: Capacity: The production output is 30,000 to 33,000 units per hour. Hsdezzfdujpfx Aqgofn Dosing: Set to a nominal volume of 10 ml (due to the design, a filling range of 6 to 12 grams is possible). Dimensions: The forming area (V) is 160 mm with a material width of 234 mm. Connection values: 400 V / 50 Hz / 3 phases. Materials: All parts in contact with the product are made of stainless steel. Process flow and scope of delivery: The aseptic filling process takes place under germ-free conditions via an integrated sterilization station. The scope of delivery for the system includes the central control panel, the sterilization and thermoforming unit, the connecting conveyor belts, and a downstream tube packaging machine (flow wrapper) for final packaging. Further information on aseptic processing: Continuous H₂O₂ disinfection of the upper and lower film directly before processing to prevent re-contamination. Sterile air forming process: Deep drawing in the encapsulated sterile tunnel using microfiltered compressed air. Overpressure encapsulation: Constant laminar flow overpressure in the filling and sealing area prevents the ingress of unsterile ambient air. Hermetic sealing: Thermal welding of the lid film takes place completely within the sterile zone before ejection. The Bosch can be refurbished or otherwise adapted by the manufacturer. Please contact us for further information.

Condition: ready for operation (used), Year of construction: 2007, A vertical high-performance flow wrapping machine Robert Bosch is available. Format range: 360mm, packaging capacity: 80bags/min. An on-site inspection is possible. Expected to be available June 2026. Hfodpfjyxratox Aqgsn

Condition: used, functionality: unexamined, Bosch turbo SCARA SR8 Hsdszl T U Nopfx Aqgsfn - without control cabinet - small crack in the housing, see photo - shipping possible for an additional charge

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following application: Diffusion welding machine for manufacturing the connection between the armature lead and the commutator for starter armatures by means of diffusion welding. Diffusion welding machine (also known as polymer diffusion welding machine, diffusion welding, copper soft-soldering machine, copper band welding machine), consisting of a main machine and control system, "PLC control, touchscreen operation". Process description: The workpiece carrier enters the station and is lifted. The alignment gripper takes the armature from the workpiece carrier and aligns it to the welding position. The loading gripper takes over the armature and inserts it into the welding chuck. The welding chuck moves with the armature to the welding position. The contact and welding cylinder move together, and the first welding process takes place. This process is repeated until the armature is completely welded. The welding chuck moves with the armature to the transfer position, and the unloading gripper takes over the armature and places it on the lifted workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with I0 armatures continue on the conveyor system; I0 armatures are conveyed to the removal conveyor. Technical data: Manufacturer: Gatek Designation: Diffusion Welding Machine Energy data: Frequency: 50 Hz Rated power: approx. 11 kW Operating voltage: 400 V / 3P Control voltage: 24 V Rated current: 20 A Fuse rating: 35 A Water: Inlet 4 bar, 15-23 °C, approx. 25 l/min Hsdpfx Aqeg Icfpjgefn Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine dimensions without control cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of manufacture: 2016 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Hydraulic power unit, Bosch Rexroth complete industrial hydraulic power pack with 15 kW Siemens motor, HYDAC oil cooler and WOERNER control system, Used Machine MAIN MOTOR AND PUMPS: Main drive motor: SIEMENS 15 kW (3~ Mot. 1LA7166-4AA61, 400/690 V, 1460 rpm, IP55, 99 kg) Rexroth main pump: A10VSO 28 DFLR/31R-PPA12N00 (250 bar, Vg = 28 cm³/rev) Rexroth 2nd pump: PGH5-21/080RE11VE4 (80 cm³/rev, internal gear pump) Rexroth 3rd pump: PGH2-22/006RR07VU2 COOLING AND FILTRATION: Oil cooler unit: HYDAC SA Cooling Systems (SCA 3L/40/2.0/M/A/1, max. 6 bar) Cooling circuit pump: HYDAC SYSTEM KFZP-3+4/3.0/P/90/40 (G 1 1/4") Cooling fan motor: A.O. SMITH 5.5 kW (400 V, IP55) Filter housing: REXROTH pressure filter housing (25 bar, 16.7 litres) CONTROL SYSTEM AND TANK: Temperature controller and display: WOERNER KTR-B/3/V300/T5/T5/TA (IP65) Hfedpezxfnzsfx Aqgen Hydraulic tank: Robust steel hydraulic oil tank with oil level indicator and inspection/cleaning opening. OVERALL DIMENSIONS: Width: 1700 mm Depth: 1300 mm Height: 1650 mm

Condition: ready for operation (used), Year of construction: 1975, A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Hjdpfx Aqeztrbwegofn

Condition: good (used), BOSCH Type 1 PCPNL 486 A Panel 1070080135-105 Control Panel AC 230V/115V/0.4A/0.8A Item condition: Used Hfjdpfxspufqhs Aqgen _RD You can find more control panels – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2017, 1 used steam boiler Manufacturer: Bosch Type: U-MB 2020 Capacity: 2,000 kg/h Permissible operating pressure: 13.0 bar Increased test pressure: 24.1 bar Maximum temperature: 195°C Total volume: 2,065 l Year of manufacture: 01/2017 Hedszltalopfx Aqgefn CE marking: CE 0036 Equipped with a Weishaupt gas burner, type WM-G20/3-A, 300-2,000 kW, ZM-LN design, 15-500 mbar, gas control system, separate control cabinet, Loos Boiler Control LBC boiler control system, feed water pump, Eco Type 1, capacity 89 kW, volume 41 liters, temperature 238°C, permissible operating pressure 31 bar, test overpressure 56 bar, and the existing coarse and fine fittings.

Year of construction: 2021, condition: used, empty load weight: 5 kg, Year of manufacture: 2021. Weight: 4.7 kg. Condition: good. 230 volts including case, drilling and chiseling. Multiple units in stock. Price: € 200,- excl. VAT Hjdpfx Ajzxvh Ejqgjfn

Year of construction: 1996, condition: ready for operation (used), A Bosch candy forming machine is offered. Max. rope speed: approx. 125m/min, min./max. output: approx. 1000/4000candies/min, hourly output range: approx. 400kg/h-1200kg/h, rope diameter range: approx. 15mm/49mm, max. filling percentage: approx. 32%, control system: Siemens SIMATIC S5-95U. Weight: approx. 2400kg. Machine dimensions X/Y/Z: approx. 3900mm/1650mm/1750mm. Documentation available. An on-site inspection is possible. Hfjdpfx Aozpyytjqgjn

Condition: good (used), Bosch DMA 140D 301-D, 1070077623-216 Technical data: 670V-705V, 140A max. Version: V.0.019 *New price: €13,554 Item condition: Used, in perfect condition Hfjdpfx Aoid Ii Toqgon More plug-in cards – new and used – can be found in our shop! International shipping costs available upon request! Buy plug-in cards and other products at low prices – Here you buy products from professionals for professionals – In our SHOP you will find more attractive offers.

Condition: good (used), Bosch VMA70CR001-D, 1070070783-507 Hfodpsivdiujfx Aqgjn 70A 380V-460V + VMA/000/0.42-D plug-in card Item condition: Used, in perfect condition R10B2_EK (BOR) You can find more plug-in cards – both new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Bosch VMA70CR001-D, 1070070783-508 plus VMA/000/0.42-D Plug-in Card 70A 380V-460V Item condition: Used, in perfect condition Hfsdpfx Ajid Iiljqgen More plug-in cards – new and used – can be found in our shop! International shipping costs available upon request! Buy plug-in cards and other products at low prices – Here you buy goods from professionals for professionals – In our SHOP you will find more attractive offers.

Condition: good (used), Bosch Starter Durability Test The machine is a Bosch in-house product. It is used to test the service life or durability of starters (also known as starting motors) for engines. Manufacturer: Bosch Type: Machine for durability testing of starters Condition: used Complete factory closure, large selection of storage platforms, pallet racking, shelving systems, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and power tools. Hjdpfxeg Ith Ro Aqgsfn You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), Bosch DM 4K 9301-D 1070083676-111 Technical data: Version: V0.00.4 670V-705V DC *New price: €6,850.00 Item condition: Used, in perfect condition Hfodpfoivdrnjx Aqgen There may be slight variations in appearance and revision status, as several units are available. You can find more power tools – new and used – in our shop! International shipping costs available upon request! Buy power tools and other products at affordable prices – here you buy products from professionals for professionals – in our SHOP you will find more attractive offers.

Condition: good (used), Bosch Turbo Scara SR6 Swivel Arm Robot + Rexroth MA4/200-7301-M + RH04.0S Controller The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and load capacity (up to 8 kg), the robot is ideally suited for assembly tasks and fast pick & place movements. The TurboScara SR6 and SR8 are swivel arm robots (Scara robots) with four axes and the following advantages: • Minimal cycle time with the highest precision • Large working area and various stroke lengths • Defined mechanical interfaces • PC control with a wide range of communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is quick to learn and allows the creation of clear and understandable programs; new with BAPSplus: graphical programming interface • Expandable via compact and flexible input/output modules: B~IO modules or decentralized CAN I/O modules • Expandable via the VTS02 solenoid valve system with CAN connection for time-saving installation Technical data: Nominal load: 2 kg Maximum load: 8 kg Nominal moment of inertia: (Axis 4) 500 kgcm² Max. moment of inertia: (Axis 4) 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque: (Axis 4) continuous/max. 5/10 Nm Weight: 48.5 kg Maximum speeds SR6 Axis 1+2: 5.9 m/s Hfsdpfx Aeiuzqtjqgon Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Cycle time (cycle 25-300-25): < 450 ms incl. controller Controller consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / Technical data see image Since the item is available multiple times and the robots have different working tools, these are only sample images and may differ. Item condition: used (Changes and errors in the technical data are subject to change!) In addition to approximately 50 paternoster lifts, numerous other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools and forklifts are available in abundance. A total of 24,000 m² of production space is being dismantled and sold. Please also note our other offers. After purchase, the amount is due within 7 working days. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Bosch DMA 45A 7101-D, 1070079655-208 Technical data: 670V-705V, 45A max. Version: V0.016 *New price: €8,770.00 Hfjdeivdqfepfx Aqgjn Item condition: Used, in perfect condition Find more DMA units – new and used – in our shop! International shipping costs available upon request! Buy DMA and other products at low prices – Here you buy products from professionals for professionals – In our SHOP you will find more attractive offers.

Condition: good (used), Bosch Turbo Scara SR 800EC robot with IQ 150 controller and PHG 2000 handheld device Manufacturer: Bosch Order No. 3842506428 Serial No. 764840020 Maximum load at the gripper flange: 100 N Stroke of the 3rd axis: 320 mm Pneumatic pressure: 4-8 bar Hodshbmvpopfx Aqgefn Weight: 100 kg Swiveling range: see diagram Item condition: used In addition to approximately 50 paternoster lifts, numerous other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, tool carts, tools, forklifts, and shelves are plentiful. In total, 24,000 m² of production space will be dismantled and sold. Please also note our other offers. After purchase, the amount is due within 7 business days. You can find more items – new and used – in our shop! International shipping costs on request!

Condition: ready for operation (used), Bosch QUVF 100U / 4P-11 / 408 / 3703597-2 servo motor SN: 1070916017, professionally completely overhauled and tested with a 12 month warranty, 100% functional, scope of delivery as per photos, The agreed sales discounts do not apply to this article. Please enquire about price separately! ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hedpfx Aqougyytsgsfn

Condition: excellent (used), Bosch Turbo Scara SR6 Articulated Arm Robot The SR6/SR8 robot system consists of robust robot mechanics with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), the robot is ideally suited for assembly tasks and fast pick-and-place movements. The TurboScara SR6 and SR8 are articulated arm robots (Scara robots) with four axes and the following advantages: • Minimal cycle time with maximum precision • Large working area and various stroke lengths • Defined mechanical interfaces • PC control with a wide range of communication options • Complies with international standards • Brushless drive technology reduces repairs • Integrated user installation, optional: gripper for connecting a tool connector • Integration of safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is quick to learn and enables the creation of clear and understandable programs; new with BAPSplus: graphical programming interface • Expandable via compact and flexible input/output modules: B~IO modules or decentralized CAN I/O modules • Expandable via the VTS02 valve block system with CAN connection for time-saving installation Technical data: Rated load: 2 kg Maximum load: 8 kg Nominal moment of inertia: (Axis 4) 500 kgcm² Maximum moment of inertia: (Axis 4) 1000 kgcm² Horizontal force: continuous/max. 60/150 N Vertical force: continuous/max. 200/300 N Torque: (Axis 4) continuous/max 5/10 Nm Weight: 48.5 kg Maximum speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Cycle time (cycle 25-300-25): < 450 ms Hfjdpfshtrdcsx Aqgen Control system consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S You can find more items - new and used - in our shop! International shipping costs on request!

Condition: reconditioned (used), WOERNER or BOSCH lubricating oil pumps with 8 to 14 pump elements and oscillating drive, oil delivery rate individually adjustable for each pump element Hfjdpfxsxl Aauo Aqgsn