Used Elha Fm 4+X for sale (5)

Condition: used, Year of construction: 2021, x-travel 400 mm y-travel 500 mm z-travel 1.000 mm Control Sinumerik rotary table diameter 300 mm Number of boring spindles 2 x 8 St. spindle tunring speed 20.000 U/min dimension of workpiece 1.100 mm Number of working hours ca. 10.998 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor, Knoll, 600 K-3/450, year of manufacture 2021 - Cooling system, Knoll, KF 400/2300, year of manufacture 2021 Accessories, tools and clamping devices shown are only included in the scope Hnslhcsvw D Arocqmol of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2020, x-travel 400 mm y-travel 500 mm z-travel 1.000 mm Control Siemens Sinumerik rotary table diameter 300 mm Number of boring spindles 2 x 8 St. Hjlsvw Dz Ujhccqmenl spindle tunring speed 20.000 U/min dimension of workpiece 1.100 mm Number of working hours ca. 14.423 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor, Knoll, 600 K-3/450, year of manufacture 2020 - Cooling system, Knoll, KF 400/2300, year of manufacture 2020 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), – MK4 – Automatic supply – 48/900 rpm Holhcovyu E Necqmonl – Rotates clockwise and anti-clockwise – Travel 250 mm – Lighting – 380V

Condition: used, Year of construction: 1983, bore capacity in steel (diameter) 60 mm arm length 2000 mm workpiece height max. 1790 mm bore capacity in cast iron 70 mm spindle turning speed range 28 - 1250 U/min spindle taper MT 9 spindle stroke 330 mm feed range - spindle 0,1 - 1,12 mm/U horiz. adjustment of drilling head 1540 mm base plate 1840 x 1000 mm Hnslhotv Immsccqmol spindle drive 7,5 kW stroke drive 3 kW voltage 500 V / 50 Hz total power requirement 11,2 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 3,3 x 1,1 x 3,1 m electr./hydraulic column clamping, cube table 500 x 600 x 500 mm, coolant device

Condition: used, Year of construction: 1988, Item 1.0 Precision turntable make EIMELDINGEN with aerostatic axial bearing Table diameter 3,400 mm Total height approx. 1,230 mm Centering bore Ø 250H7X 25 mm Permissible transport load 20,000 kg Holding torque of the table clamp 2,400 daNm Table speed 0.002 - 2 min Dead weight approx. 22,000 kg Operating voltage 380 V, 50 Hz. Control voltage 24V Positioning accuracy (without controller error) ± 1" Plan accuracy 0.02 mm Axial run-out accuracy 0.01 mm Concentricity deviation of the centering bore 0.01 mm Resolution of the position measuring systems 0.0001° Item 2.0 3-axis cross-bed boring mill Technical data Column stroke transverse "X" 500 mm Horizontal slide stroke "Z" 650 mm Vertical headstock "Y" 800 mm Rapid traverse speed Y + Z 8,000 mm/min Feed speed (infinitely variable) 0-1000 mm/min Spindle drive power 15 kW Spindle diameter in front bearing 100 mm Speed range 0-4000 rpm Tool holder ISO 50 Position tolerance Tp (1000) 0.012 mm Position spread Ps 0.008 mm Position deviation PA 0.008 mm Measurements carried out at room temperature + 20°C. Item 3.0 Grinding device for clamping fixture Hnjlhju R Nm Hsccqmel Item 4.0 Coolant system/chip disposal Total coolant volume 1,200 l High-pressure pump for unit 1 60 l/min 10 bar Low-pressure pump for units 2+3 40 l/min 2 bar Flushing pump 200 l/min 0.2 bar The pressure of the high-pressure pump is monitored. A rinsing hose for cleaning the workpiece and clamping device is available. General: Data of the complete system Base area of the entire system approx. 8,800 x 10,800 mm Base area of the actual machine approx. 8,000 x 6,200 mm Max. Machine height without workpiece approx. 3,700 mm Max. Machine height with workpiece approx. 5,500 mm Operating voltage 380 V. 50Hz. Control voltage 220 V./24 V Total installed power approx. 55 kW Max. Power consumption in normal operation approx. 28 kw