Used Sany Crawler Crane for sale (27)

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), axle configuration: 4x4, gearing type: automatic, Year of construction: 2008, GVW: 1 kg Please contact Emal Jaweed for more information Nwedpfx Aozgth Eegrol

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), axle configuration: 4x4, gearing type: automatic, Year of construction: 2008, GVW: 1 kg Nsdpfxjzgthxe Agrswl Please contact Emal Jaweed for more information

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,521 h, load capacity: 45,000 kg, lifting height: 15,100 mm, fuel type: diesel, mast type: telescopic, construction height: 4,770 mm, empty load weight: 72,500 kg, total length: 11,320 mm, drive type: Diesel, construction width: 4,188 mm, Full container reach stacker Mast type: Telescopic Transmission: DANA TE30 Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 18.00-25 Rear tire type: Pneumatic Rear tire size: 18.00-25 Description: In addition to this SANY model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing options at favorable terms are always possible for us. We also gladly purchase your used vehicles outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this SRSC45G5-P. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom fabrication for forklifts from 8 tons upwards. We will also gladly offer your vehicle for sale on consignment in our showroom. Nodoz D Ni Repfx Agrjwl ELME piggyback spreader 20 / 40' type: 857-19251 Heater, full cab

Condition: good (used), functionality: fully functional, fuel type: diesel, overall weight: 28,000 kg, empty load weight: 28,000 kg, operation weight: 28,000 kg, drive condition: 70 %, chain condition: 70 %, Year of construction: 2018, operating hours: 1,800 h, Equipment: air conditioning, steel tracks, EQUIPMENT: Cummins engine, Stage IV, approx. 194 hp, 809 Nm, 6,700 cc Load sensing hydraulics, max. 2 x 246 l/min 1st proportional auxiliary control circuit for grabber/hammer on joystick 1 2nd non-proportional auxiliary control circuit for attachments on joystick 2 Safety check valves for boom and dipper with overload indicator Quick coupler hydraulic circuit, double-acting Swing brake Nodpoz Ef Ncjfx Agrswl 2 travel speeds Bucket breakout force ISO 187 kN Dipper tear force ISO 130 kN ROPS cab Boom 5,900 mm, dipper 2,950 mm with wear strips already included in the standard equipment! (L x H x W) 10,290 x 3,225 x 2,990 mm Steel tracks 600 mm Battery main switch Driving alarm and rotating beacon Engine emergency stop switch LED spotlights 3x on the roof (2x front, 1x rear) LED spotlight 1x on the boom LED spotlight 1x on the toolbox 12V socket Document compartment Radio with speakers AUTOMATIC CLIMATE CONTROL Foldable windshield 8x auxiliary circuit flow settings via on-board computer with multi-function monitor Floor mat Cup holder Air-suspended seat with fabric upholstery and seat heating Fueling pump

Condition: used, Year of construction: 2022, Mini Excavator Sany SY26U Cabin    • Operating hours: 304    • Operating weight: 2,760 kg    • Undercarriage width: 1,550 mm    • Tracks: 300 mm    • Work lights    • 2x auxiliary hydraulic function    • Water-cooled 3-cylinder Yanmar diesel engine    • 1x variable axial piston pump with load-sensing control    • GP hydraulic quick coupler    • Complete with bucket set Njdpoy Riqmsfx Agrswl    • In like-new condition!!    • 3 units available Condition: Used Year of construction: 2022

Condition: ready for operation (used), functionality: fully functional, power: 202.26 kW (275.00 HP), fuel type: diesel, next inspection (TÜV): 08/2027, shovel volume: 1.6 m³, digging bucket width: 1,560 mm, Year of construction: 2018, operating hours: 1,727 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mast type: Mono Bucket volume: 1.6 m³ Bucket width: 1,560 mm Arm reach: 3,200 mm Maximum digging depth: 7,570 mm MACHINE DETAILS Power: 202.26 kW (275 hp) Fuel type: Diesel Fuel tank volume: 450 l Drive condition: 100% Next inspection (TÜV): 08/2027 Overall width: 3,200 mm Total weight: 37,000 kg Operating hours: 1,727 h EQUIPMENT CE certificate Additional headlights Air conditioning Grabber hydraulics Hydraulics Low noise Nwodpfx Agszygabjrjl On-board computer Auxiliary heater Standard bucket

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 80 h, load capacity: 16,000 kg, lifting height: 4,000 mm, fuel type: electric, mast type: duplex, construction height: 3,754 mm, empty load weight: 21,662 kg, drive type: Elektro, Heavy-duty forklift – Electric Load center: 1200 Mast type: Duplex Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 12.00-20 18PR Front tire condition: New Rear tire type: Pneumatic Rear tire size: 12.00-20 18PR Rear tire condition: New Battery manufacturer: Catl Njdpfjzywl Uox Agrewl Battery condition: New Side shifter, fork positioner

Condition: as good as new (ex-display), functionality: fully functional, power: 195 kW (265.13 HP), fuel type: diesel, color: yellow, operation weight: 18,500 kg, Year of construction: 2023, machine/vehicle number: SW4055CD00288, Equipment: air conditioning, cabin, cruise control, standard shovel, This SANY SW405 demo machine, with its powerful Deutz common rail diesel engine and robust, heavy-duty frame design, is the ideal choice wherever power and reliability are required. Its distinctive features include high breakout forces and large tipping loads. Moreover, this powerhouse, with its many equipment options, is a multi-functional machine that can easily handle a wide range of wheel loader tasks. Nodpfozxdcqjx Agrswl

Condition: new, SANY SY500 Heavy-Duty Ripper Attachment Galen Group manufactures heavy-duty ripper attachments for the SANY SY500 excavator and other large excavator models. Designed for demanding excavation and ground-breaking applications, the ripper helps penetrate hard, compacted and rocky materials before loading or removal. Its reinforced construction is suitable for intensive use in mining, quarrying, construction, roadwork and earthmoving projects. Key Features: • Manufactured for the SANY SY500 excavator • Heavy-duty reinforced construction • Designed for hard soil, compacted ground and rocky material • High penetration performance • Machine-specific connection dimensions • Replaceable wear components • Custom designs available according to the application • Manufactured in Turkey by Galen Group The attachment connection, geometry and reinforcement structure are manufactured according to the excavator specifications and the customer’s working conditions. We manufacture excavator rippers, rock buckets, heavy-duty buckets, mining buckets, long-reach boom-arm sets and other custom excavator attachments. Please contact us for pricing, production time and technical details. Nodpfsz Dpdhox Agrewl SEO Keywords: SANY SY500 ripper, SANY excavator ripper, excavator ripper attachment, heavy-duty ripper, rock ripper, single-shank ripper, mining excavator attachment, quarry excavator attachment, ground-breaking attachment, SANY SY500 attachment, excavator attachments manufacturer, ripper manufacturer, Galen Group, excavator attachments Turkey

Condition: used, functionality: fully functional, power: 78.5 kW (106.73 HP), fuel type: diesel, operation weight: 16,000 kg, chain condition: 85 %, emission class: euro5, Year of construction: 2021, operating hours: 1,977 h, machine/vehicle number: SY015DCB25968, Equipment: additional headlights, air conditioning, cabin, gripper hydraulics, hydraulics, steel tracks, Steelwrist X20 DF/CW30 - XControl Ditch box 1600mm Backhoe bucket 800mm Banana container 600mm Nwedpfev Uxgmsx Agrel Kit iDig Touch 2D Sorting grab Vematec VSSG903-CW30

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, fuel tank capacity: 540 l, operation weight: 23,700 kg, Sany SY235C: Reliable. Efficient. Simple. Working range: Max. horizontal reach at ground level: 6,074 mm Max. digging depth: 6,554 mm Max. digging height: 9,500 mm Max. dumping height: 6,655 mm Max. vertical digging depth: 6,074 mm Machine height at minimum swing radius: 7,600 mm Minimum swing radius: 3,662 mm Performance: Swing speed: 11.1 rpm Digging force – bucket ISO: 175 kN Digging force – arm ISO: 122 kN Boom length: 5,700 mm Stick length: 2,900 mm Nwodpfeykrxxex Agrsl

Condition: new, The Sany SY35U zero-tail swing excavator is particularly well-suited for use in confined spaces. Its robust design and excellent performance specifications make this machine ideal for all earthmoving and road construction projects. - Adjustable operator seat - Multi-language display and radio - Air conditioning - Boom: standard 1400mm - Optional 1650 mm - 2x LED work lights on the cab Nwsdpfegi Rmcox Agrjl - 1x LED work light on the boom - Hose burst valves - Battery main switch - Engine emergency stop switch

Condition: new, - Stille trillingsarme motor Nwjdpfxsgi Nqto Agrol - Efficiënt, krachtig hydraulisch lastafhankelijk systeem - Duidelijke instrumenten en groot kleurenscherm met hoge resolutie - Optimale zichtbaarheid - Laag gewicht en compacte afmetingen - Alle belangrijke onderhoudspunten zijn zeer gemakkelijk toegang toegankelijk - Sany vijf jaar garantie - ROPS/FOPS-gecertificeerd voor bedrijfsveiligheid

Condition: new, The Sany SY18C is extremely powerful and exhibits excellent stability in all situations. This machine meets all the expectations of its users thanks to its robust design and easy operation. Nwodjgi N D Repfx Agrel - Cab - Scoop handle 1130mm - Breaker line, proportional control - Dozer blade with adjustable width - Adjustable undercarriage 980 - 1350mm - 2 speeds, 2.2 - 3.8 km/h - Rubber tracks 230mm - 2x LED lighting on cabin - 1x LED lighting on boom - Battery main switch - Motor emergency stop - 5 years Sany warranty

Condition: new, The Sany SY50U excavator is particularly suitable for use in confined spaces. The robust design and excellent performance data make this machine ideal for all earthmoving and road construction projects. Nsdpjglp Nfjfx Agrewl

Condition: new, fuel tank capacity: 465 l, operation weight: 27,000 kg, breakout force: 170 kN, The SY265C is in its element under tough conditions on the construction site. Its undercarriage and solid boom provide advantageous stability even when working at full power. Njdpfx Ajgmthkogrewl

Condition: used, functionality: fully functional, power: 209 kW (284.16 HP), operation weight: 32,264 kg, Year of construction: 2022, operating hours: 4,950 h, Equipment: UVV, Year of manufacture: 2022 Engine power: 284 hp (208.8 kW) Operating weight approx. 32,265 kg Bucket breakout force ISO 204 kN Stick tear force ISO 153 kN Swing speed 9 rpm Max. travel speed 5.2 km/h Rear and side camera LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Engine: Cummins QSL9-C280 engine Water-cooled, 6-cylinder, with common rail injection and Adblue Stage V Power 209 kW / 285 hp; 2100 rpm 1,472 Nm / 1400 rpm Displacement 8,900 ccm Sensor-controlled idle automatic Cyclone pre-filter Hydraulics: State-of-the-art, optimized, demand-flow-controlled hydraulic system (positive flow controlled) Hydraulic load sensing Max. oil flow 2x 280 l/min Max. oil flow AUX1 500 l/min 1st proportional auxiliary control circuit for grab/hammer on joystick 1 2nd proportional auxiliary control circuit on joystick 2 Safety check valves for stick and boom with overload indicator Quick coupler hydraulic circuit, double-acting Adjustable oil flow rate for attachments Adjustable oil pressure for attachments Convenient switching of hammer/shear hydraulics in the display Hydraulic pre-control of the joysticks 10x additional circuit flow rate settings via on-board computer with multi-function monitor Swing brake 2 travel speeds Upper and lower carriage: Boom 6,150 mm, stick 3,200 mm, max. reach 10,870 mm Heavy-duty undercarriage and equipment with wear strips Steel tracks 600 mm Bucket breakout force ISO 204 kN Stick tear force ISO 153 kN Rear and side camera Battery main switch Fueling pump with automatic overflow protection Tool compartment Driving alarm and rotating beacon LED headlights 3x on the roof (2x front, 1x rear) LED headlights 2x on the boom LED headlight 1x on the tool box Transport dimensions: (L x H x W) 10,667 x 3,225 x 2,990 mm Operator cabin: ROPS Nwedpfx Agozaqlisrjl Engine emergency stop switch 12V socket Document compartment Radio, Bluetooth-enabled with hands-free function for smartphone with speakers Automatic climate control Heater Tilting front window Large 10" high-resolution touch display Joystick adjustment independent of seat adjustment Floor mat Cup holder Air-suspended seat with fabric cover and seat heating

Condition: used, functionality: fully functional, load capacity: 70,000 kg, fuel type: diesel, drive type: Diesel, Other equipment Njdjzn A Uwopfx Agrewl Condition (Technical): New

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 125 h, load capacity: 75,000 kg, fuel type: electric, construction height: 3,200 mm, empty load weight: 10,000 kg, total length: 5,800 mm, drive type: Elektro, tractive force with load: 75,000 N, construction width: 2,550 mm, Terminal tractor Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 280/75 Front tire condition: New Rear tire type: Pneumatic Rear tire size: 280/75 Rear tire condition: New Nwodpfszh Rtzex Agrol

Condition: like new (used), functionality: fully functional, power: 298 kW (405.17 HP), Year of construction: 2022, operating hours: 118 h, Equipment: UVV, Weight: approx. 65,000 kg Max. working height: 28.15 m Extremely sensitive – incredible reach Undercarriage hydraulically extendable to 4.50 meters Engine: Cummins QSG12: water-cooled 6-cylinder engine with Common Rail injection and AdBlue Stage V, 298 kW / 405 hp (2,100 rpm) Hydraulics: Load Sensing, max. 2 x 360 l/min Nwedpfx Aezaqp Uegrol 1st proportional auxiliary control circuit for grapple/hammer on joystick 1 2nd non-proportional auxiliary control circuit for auxiliary equipment on joystick 2 Safety check valves for boom and jib with overload indicator Quick coupler hydraulic circuit, double-acting Swing brake 2 travel speeds ROPS driver cabin, adjustable Protective grille ISO for roof Protective grille ISO for windshield Boom and arm (supplied with a separate support for transport) Demolition boom and arm (28 m) with intermediate joint (supplied with a separate support for transport) Adjustable undercarriage from 3,340 to 4,500 mm Steel tracks 600 mm Battery main switch Travel alarm and rotating beacon Engine emergency stop switch LED light bar on driver cabin LED spotlights 2x on boom LED spotlight 1x on toolbox 12V socket Document compartment Radio with speakers AUTOMATIC CLIMATE CONTROL Rear view camera 8 x auxiliary circuit flow setting via on-board computer with multi-function monitor Floor mat Cup holder Angle warning for working outside the safety angle (75 degrees) Air-sprung seat with fabric cover and seat heating Fueling pump All-round view camera

Condition: excellent (used), functionality: fully functional, power: 29.42 kW (40.00 HP), fuel type: diesel, color: yellow, overall weight: 5,300 kg, empty load weight: 5,300 kg, operation weight: 5,300 kg, chain condition: 80 %, Year of construction: 2023, operating hours: 86 h, Equipment: UVV, additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, Year of manufacture: 2023 Operating hours: approx. 86 Operating weight: approx. 5,300 kg Exceptionally maneuverable. Convincingly efficient. Big performance in a small package. STANDARD EQUIPMENT: Yanmar engine, Stage V, approx. 40 HP, 145 Nm, 2,191 cc Load sensing hydraulics, max. 110 l/min 1st proportional auxiliary control circuit (GRL/hammer) on joystick 1 2nd proportional auxiliary control circuit (grab) on joystick 2 Swing brake 2 travel speeds Cylinder protection on arm Nwsdpjx Ndcbsfx Agrjl Bucket breakout force ISO 32.5 kN Arm tear-out force ISO 22.9 kN ROPS operator cab Boom 2,700 mm, dipper stick 1,500 mm (L x H x W) 5,390 x 2,630 x 1,960 mm Dozer blade 400 mm rubber tracks Main battery disconnect switch

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 276 h, machine/vehicle number: SY008HCD117108, Equipment: UVV, air conditioning, all wheel drive, cabin, rubber tracks, Year of manufacture: 2023 Engine power: 73 HP (53.7 kW) Operating hours: 276 h Operating weight approx. 8,800 kg Engine: Yanmar, Stage V, approx. 73 HP, 202 Nm, 3,319 cc Hydraulics: Load Sensing, max. 185 l/min 1st proportional auxiliary circuit (grab/hammer) on joystick 1 2nd proportional auxiliary circuit (grapple) on joystick 2 Safety lifting valves for dipper arm and boom with overload indicator Double-acting quick coupler hydraulic circuit Swing brake 2 travel speeds Cylinder protection on the arm Bucket breakout force ISO: 56 kN Dipper arm tear-out force ISO: 38 kN Operator cab: ROPS Adjustable boom, dipper arm 2,050 mm Dozer blade Rubber tracks 450 mm Battery main switch Travel alarm and rotating beacon Engine emergency stop switch 2x LED work lights on cab roof 1x LED work light on boom 12V socket Nwedpfx Agexltt Sersl Document compartment Radio with loudspeaker Including quick coupler

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: SY008CE0693K8, Year of manufacture: 2024 Engine power: 73 hp (53.7 kW) Operating weight approx. 8,800 kg Yanmar engine, Stage V, approx. 73 hp, 202 Nm, 3,319 cc Load sensing hydraulics, max. 185 l/min 1st proportional auxiliary control circuit for GRL/hammer on joystick 1 2nd proportional auxiliary control circuit for grapple on joystick 2 Nwsdpfev Nix Aox Agrsl Safety lift valves for stick and boom with overload indicator Double-acting quick coupler hydraulic circuit Swing brake 2 travel speeds Cylinder protection on the boom Bucket breakout force ISO 56 kN Stick tear-out force ISO 38 kN ROPS cab Adjustable boom, dipper stick 2,050 mm Dozer blade Rubber tracks 450 mm Battery main switch Travel alarm and Rotating beacon Emergency engine stop switch 2 LED headlights on the roof 1 LED headlight on the boom 12V connection Document compartment Radio with speaker

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,510 h, Equipment: air conditioning, cabin, gripper hydraulics, hammer hydraulics, TECHNICAL DETAILS Power: 129 kW Power: 175.39 HP MACHINE DETAILS Total weight: 23,500 kg Operating weight: 23,500 kg Operating hours: 1,510 h EQUIPMENT Grapple hydraulics Hammer hydraulics Hydraulics Cab Air conditioning UVV safety inspection Additional work lights Demolition guards for roof and windscreen Central lubrication system Bekamax New main control valve Heater Automatic climate control Radio with speakers Adjustable armrests 12V socket USB port (music) Air-suspended driver's seat Heated seat Windscreen wiper Auxiliary circuit 1 on joystick Auxiliary circuit 2 on joystick Tiltable roof window Integrated cooler compartment 10" touch display Battery master switch Travel alarm Rotating beacon Camera (rear & right) Handrails Lockable engine covers Lockable fuel filler cap Safety valves on boom and arm Double-acting hydraulic circuit for quick coupler incl. piping Crusher & shear circuit (proportionally controlled from joystick), incl. piping Rotation circuit (proportionally controlled from joystick), incl. piping Adjustable oil flow for attachments Adjustable oil pressure for attachments LED work lights front roof LED work lights boom LED work lights platform LED work lights rear roof Steel track 600 Lashing eyes Automatic idle control Refueling pump Nodpfx Agjxmgfwsrewl SCR DPF DOC Swing brake 2 travel speeds Piping for auxiliary circuit 1 Piping for auxiliary circuit 2 Main filter Hydraulic pilot control for joysticks Refueling pump

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, breakout force: 187 kN, chain width: 600 mm, Equipment: gripper hydraulics, hammer hydraulics, TECHNICAL DETAILS Boom: 5,900 mm Arm: 2,950 mm Power: 144 kW Bucket breakout force: 187 kN Arm tear-out force: 130 kN Steel track width: 600 mm MACHINE DETAILS Fuel type: Diesel Engine: Cummins, Stage IV Engine power: approx. 194 hp Torque: 809 Nm Displacement: 6,700 ccm Dimensions & Weight Dimensions (L x H x W): 10,290 x 3,225 x 2,990 mm Operating weight: 27,500 kg Operating hours: approx. 1,600 h Nedpfexmgnlsx Agrowl EQUIPMENT Grab hydraulics Hammer hydraulics Load-sensing hydraulics ROPS cab Air conditioning UVV (accident prevention regulation compliant) Additional work lights Proportional auxiliary circuit for grab/hammer via Joystick 1 Non-proportional auxiliary circuit GRL via Joystick 2 Safety lifting valves for arm and boom with overload indicator Double-acting quick coupler hydraulic circuit Swing brake 2 travel speeds Travel alarm and beacon Emergency engine stop switch 3x LED work lights on cab roof (2x front, 1x rear) 1x LED work light on boom 1x LED work light on toolbox 12V socket Document compartment Radio with loudspeaker Automatic climate control Tilting front window 8x auxiliary flow settings via onboard computer with multifunction monitor Floor mat Cup holder Air-suspended seat with fabric cover and seat heating Refueling pump