Used Trailor Smb for sale (37)

Condition: refurbished (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 410B010616004, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 410B010616004 Year of manufacture: 2006 Strapping: 5-9 mm, coil core 200 mm, width 190 mm Transport speed: 0.8 m/sec. - Transport height: 850 mm (30 packages/min. with single strapping, 15 packages/min. with parallel strapping) 12-month warranty (excluding: machine control, travelling expenses and wear and tear) Properties / Features: ⦁ Suction ⦁ Reinforced exhaust, with bundle height detection via bundle press (bundle height below 10 mm to min. approx. 3 mm - depends on product) ⦁ Strap scanning ⦁ Strap ejector ⦁ Strap infeed, automatic ⦁ Strap cutting blade ⦁ Command buttons, additionally opposite operating unit (START/STOP/NOT-OFF) ⦁ Blow gun with spiral hose ⦁ Bundle height-dependent automatic belt tensioning system ⦁ Inlet and outlet timing with complete plug connection, 16-pin (Walther) ⦁ Height adjustment of the feet ⦁ Light barrier attachment at the top ⦁ Mains cable, length 3 m ⦁ Package scanning ⦁ Parcel stops, move away from the parcel when opened ⦁ Parcel press gentle (with laser) ⦁ Plexi protective doors on the side, firmly screwed in place ⦁ Press beam, double ⦁ PLC control with jog dial control panel ⦁ Coil quick-change device ⦁ Cycle-stop interlinking ⦁ Table belt drive, infinitely variable (frequency converter) ⦁Electrics: Connection voltage 1 phase with neutral conductor or 2 phases at 198V, 208V, 218V, 220V - 240V, 390V - 410V, 450V - 500V Nslowd I Idohccqrjcr 50 Hz or 60 Hz - Here set to 400 V - 50 Hz -

Condition: ready for operation (used), Year of construction: 2009, input voltage: 230 V, input frequency: 50 Hz, workpiece weight (max.): 180 kg, 🔹 General Information Brand: Cyklop Model: 2009 SMB AMPAG SPRINT Type: Strapping Machine (Band Binding Machine) Year of Manufacture: 2009 Seller’s Stock Code: 111А030935008 🔹 Technical Specifications Strapping Method: Automatic banding/strapping Strap Type: Polypropylene (PP) strap Strap Width: 5mm – 12mm (adjustable depending on the model setup) Tension Range: 5 – 45 kg (adjustable for different packaging needs) Cycle Speed: Approx. 50 straps per minute (depending on strap size and package type) Sealing Method: Heat-seal technology Tensioning System: Electronically adjustable 🔹 Physical & Power Details Machine Dimensions (LxWxH): 60 × 95 × 150 cm Weight: 180 kg Table Height: Standard working height (approx. 810 mm) Input Voltage: 230V / 50Hz (single-phase) Power Consumption: Approx. 0.5 - 1.0 kW Protection Rating: IP 54 (dust & splash protection for industrial environments) Ncolhccjv Eczpoqrsr 🔹 Key Features ✅ Fast & Efficient: High-speed automatic strapping for fast production lines ✅ Adjustable Tension: Ensures secure bundling for various package sizes ✅ Easy to Use: User-friendly control panel for simple operation ✅ Durable & Reliable: Designed for continuous operation in industrial settings ✅ Compact Design: A Space-saving machine suitable for different work environments 🔹 Typical Applications Logistics & Warehousing: Carton bundling, securing parcels Manufacturing & Production: Strapping product batches for transport Printing Industry: Binding newspapers, magazines, and print materials Retail & Packaging: Securing goods for storage and shipping

Year of construction: 2003, Condition: excellent (used), machine/vehicle number: N3.610, Available: immediately Ncolhedybaqsccqrer

Condition: used, empty load weight: 6,500 kg, maximum load weight: 22,500 kg, operation weight: 29,000 kg, first registration: 09/2002, next inspection (TÜV): 05/2023, suspension: air/air, tire size: 385 / 65 R 22.5 / 15mm, total length: 13,500 mm, total width: 25,500 mm, total height: 12,000 mm, front tire size: 385 / 65 R 22.5 / 15mm,

Condition: good (used), Year of construction: 2006, Compact and fast strapping machine with maximum package dimensions of approximately 600 mm wide x 600 mm high from a renowned German manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward spool changing and threading system. Nslepuy Itjhccqrscr -Sealing type: Hot wedge welding. -Up to approximately 42 straps per minute. -Strap type: PP strap. -Strap width adjustable from 5-9 mm: Set to 5 mm. -Strap tension adjustable on the control panel. -Soft tensioning possible. -Standby function / power saving mode. -Sturdy foot pedal. -Low-maintenance and low-wear strap frame. -Movable and lockable via foot casters. The machine can be demonstrated with power on.

Condition: used, Year of construction: 2000, The SMB SM1-600 is a reliable strapping machine designed for efficient and secure packaging. Currently in storage and located in Germany. With a frame size of 600x600 mm and a maximum performance of 42 strappings per minute, it is well-suited for various industrial packaging needs. The machine is compatible with 5 mm PP strap (DIN 55535) and features a foot switch for convenient operation. Format: 600x600 mm Equipment: Nolsvfx Tuehccqrjcr frame size 600x600mm band width 5mm core diameter 200mm Output max. 42 strappings/min suitable for PP tape 5mm DIN 55535 floor-standing device; foot switch

Condition: refurbished (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 410B010616003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 410B010616003 Nslhswcq E Asccqrscr Year of manufacture: 2006 Strapping: 5-9 mm, coil core 200 mm, width 190 mm Transport speed: 0.8 m/sec. - Transport height: 850 mm (30 packages/min. with single strapping, 15 packages/min. with parallel strapping) 12-month warranty (excluding: machine control, travelling expenses and wear and tear) Properties / Features: ⦁ Suction ⦁ Reinforced exhaust, with bundle height detection via bundle press (bundle height below 10 mm to min. approx. 3 mm - depends on product) ⦁ Strap scanning ⦁ Strap ejector ⦁ Strap infeed, automatic ⦁ Strap cutting blade ⦁ Command buttons, additionally opposite operating unit (START/STOP/NOT-OFF) ⦁ Blow gun with spiral hose ⦁ Bundle height-dependent automatic belt tensioning system ⦁ Inlet and outlet timing with complete plug connection, 16-pin (Walther) ⦁ Height adjustment of the feet ⦁ Light barrier attachment at the top ⦁ Mains cable, length 3 m ⦁ Package scanning ⦁ Parcel stops, move away from the parcel when opened ⦁ Parcel press gentle (with laser) ⦁ Plexi protective doors on the side, firmly screwed in place ⦁ Press beam, double ⦁ PLC control with jog dial control panel ⦁ Coil quick-change device ⦁ Cycle-stop interlinking ⦁ Table belt drive, infinitely variable (frequency converter) ⦁Electrics: Connection voltage 1 phase with neutral conductor or 2 phases at 198V, 208V, 218V, 220V - 240V, 390V - 410V, 450V - 500V 50 Hz or 60 Hz - Here set to 400 V - 50 Hz -

Condition: new, Year of construction: 2023, Application combs 15 mm Application combs 20 mm finger joint profile 15 mm finger joint profile 20 mm delivery time 3 days Ncolhcsiacbpecqrsr

Year of construction: 2001, Condition: excellent (used), Available: immediately Ncolhccqodyau Isrer

Year of construction: 2004, Condition: good (used), Build in 2004 - Type of strapping: single & double - max speed for single strap: 36 bundles/min - max speed for parallel (double) strap: 19 bundles/min - min bundle dimensions (w x l): ~200 x 170 mm - max bundle dimensions (w x l): ~560 x 560 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~440 mm - max weight bundle/package: 25 kg - Infeed / outfeed (conveying) height: ~800-930 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Over all length equipment: ~736 mm - Over all width equipment: ~1360 mm - Over all height equipment: ~1915 mm - Input Power: 1,5 kVA - Voltage: 400V, 50/60 Hz, 3Ph, N - Air requirement: 330l/min freie Luft 6 bar - Weight: ~550 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Condition: cleaned & in working conditions - Machine available: upon request Nceleh Iy Rujhccqrsr Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Condition: used, - no description available - Nolhcev N Ntascqrjcr

Condition: excellent (used), Year of construction: 2007, Machine for strapping product stacks year 2007 Nslhev Sdczoccqrjcr

Condition: refurbished (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 112A011713008, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Serial number: 112A011713008 Year of construction: 2017 for parcels max. 600 mm width x 600 mm height 12-month guarantee (excluding: machine control, travel costs and wear and tear) Properties / features: - ASLF anti-strap loss function permanent strap control Njlhccswclgnjqrjcr - Automatic tape feed - Strap width 5 - 12 mm, optional - Operator terminal with soft tension button - DAT Direct-Access-Technology - Torque-controlled retensioning force, adjustable - Single item strapping - Foot switch on the operator side - Mobile machine - Table height infinitely adjustable - Table top hinged at the front and removable at the rear - Machine colour: Frame RAL 7004 / Frame RAL 7016 - Internal strapping coil - Mains connection at the top - Strapping tape 5x0.47mm, white, 7000 m/coil, polypropylene DIN EN 13 394 The machines are delivered with this strap, the remaining strap is included. - Table top front 600, hinged - Rear table top 600, screwed

Condition: used, color: other, first registration: 11/1990, Year of construction: 1990, We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Ncslsu U Nh Nohccqrsr

Year of construction: 2016, Condition: used, Haewa / SMS Fraeskopf debarker Trolley made of a heavy welded steel construction 4 pairs of main drive wheels 1 split, toothed pair of main drive wheels Log drive with 2 speeds Hydraulics for ejector Frame arm made of a heavy steel construction cutter head: working width 300mm, beater bars, beater knives and overrun ring Milling head carbide tipped Hydraulic lowering of the milling head carriage drive frequency controlled, v = 0 - 60 m/min Type H 249 / 800 Master drive wheels 800mm log diameter 0,2m - 1,0m Ncelecrp Akjhccqrjr trunk length 2,0m - 6,0m ( also longer ) Total connected load 35kW With control panel

Year of construction: 2004, Condition: good (used), Build in 2004 - Type of strapping: single & double - max speed for single strap: 36 bundles/min - max speed for parallel (double) strap: 19 bundles/min - min bundle dimensions (w x l): ~200 x 170 mm - max bundle dimensions (w x l): ~560 x 560 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~440 mm - max weight bundle/package: 25 kg - Infeed / outfeed (conveying) height: ~800-930 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Over all length equipment: ~736 mm - Over all width equipment: ~1360 mm - Over all height equipment: ~1915 mm Ncslhcceh Iy Skeqrjr - Input Power: 1,5 kVA - Voltage: 400V, 50/60 Hz, 3Ph, N - Air requirement: 330l/min freie Luft 6 bar - Weight: ~550 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Condition: refurbished (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 223A011235001, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-9 mm Year: 2012 Machine-No.: 223A011235001 Condition: Refurbished Our latest project was the refurbishment of this fully automatic strapping machine SMB CUBE 600x600c from 2012. You might be able to see from the outside and the price of just € 10,600 that this CUBE is a second-hand machine, but when you look at the list of spare parts and labour hours used, it becomes clear: this machine has been extensively refurbished to its original condition and is now as good as new; perhaps even a little better. As good as new with the CUPASO refurbishment With our reconditioned used machines, you get as-new technology at used machine prices. We make sure that we only refurbish technology that still meets today's requirements. This also applies to the SMB CUBE 600x600c offered here. We also offer you our comprehensive service for this refurbished device. In addition to our 12-month guarantee, this includes the long-term supply of consumables, spare parts and technical service. Prepared for integration into automated packaging lines Even as a stand-alone machine, this CUBE can be customised to your requirements. The machine detects incoming parcels or product stacks and straps them once or several times according to the previously defined parameters. With the help of the pneumatic package press and the package height-dependent strap tension, packages of different sizes and characteristics can be processed unsorted and individually. By adding a machine of the same design, which is also available from us, it is even possible to realise cross or multiple strapping at high speeds. This is what we promise Our guarantee commitment of a full 12 months of course also applies to our SMB CUBE 600x600c. This means you are on the safe side. If something should break during this period, we will replace the defective component and install it at our expense (excluding wear and tear and travel). And if you decide quickly, you will receive our exclusive pre-sale discount of 10%. Do you have any questions? We look forward to your call or e-mail and will be happy to show you our current projects and new equipment in our showroom. Why don't you come and visit us? Features: • Economical due to maximum availability • Robust and extremely low-maintenance design Njlhccot Uzv Teqrocr • Simplest handling • Minimal space requirement • Best cost/benefit ratio • Max. 35 parcels/min; depending on back-tensioning path and frame size, without package pressing • Mobile machine (2 fixed/ 2 steerable rollers with brake) • Table height 770 -1000mm • Driven conveyor belts • Machine colour: Frame RAL 7004 / Frame RAL 7016 Special features: • Signal exchange: 2 x counter plug with tool • Additional light sensor for mounting on leading or following machine • Signal exchange: Do not strap package • External button: Do not strap package • Package height-dependent belt tension (laser sensor) • Pneumatic package press (600x600) • Double press bar 600 • Draw-in protection on table top, infeed side

Condition: used, color: other, first registration: 11/1990, Year of construction: 1990, We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Njlhcsu U Nfnscqrscr

Year of construction: 2008, Condition: good (used), cross strapping machine with turn table single strap max bundles/min: 40 double strap max bundles/min: 20 cross strapping max bundles/min: 18 bundle width: 200-560 mm bundle length: min 200 mm bundle height: 10-440 mm bundle diagonal at cross strapping: max 560 mm Nelhccqeg Nzv Uerocr Electrical data: 200-440V, 3Ph AC, 50 Hz, 1,5 kW weight: 540 kg

Condition: refurbished (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 223A011643003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-12 mm Year: 2016 Machine-No.: 223A011643003 Condition: Refurbished Ncjlhcjukvgrecqrjr Features: ⦁ ASLF Anti-Strap-Loss-Function Permanent strap control ⦁ Automatic strap feed ⦁ Strap width 5 - 12 mm, optional ⦁ DAT Direct-Access-Technology Torque-controlled retraction force, adjustable ⦁ Adjustable transport speed ⦁ Machine mobile ⦁ Table height continuously adjustable ⦁ Package flow monitoring Special features: • Right machine (viewed in the direction of conveyance) • EMERGENCY STOP button in the Easy Control control unit • Signal exchange: 2 x mating connector with tool • Additional light barrier for attachment to the front or rear conveyor • Signal exchange: Do not strap the package. To the front-running machine • External button: Do not strap the package • Strap tension dependent on the package height (laser sensor) • Pneumatic package press (600x600) • Double press beam 600 • Feed protection on the table top, inlet side

Condition: used, color: other, We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Ncsljiiygcohccqrsr

Condition: refurbished (used), Year of construction: 2009, machine/vehicle number: 111A030921006, warranty duration: 12 months, frame height: 400 mm, frame width: 500 mm, Equipment: documentation/manual, Mature technology With the SM1 series, which was also marketed under the name AMPAG Sprint, the German manufacturer Schwede Maschinebau GmbH has created a real long-running success that is still in use thousands of times today. Whether in print stores, lettershops or in warehouses and logistics, this all-rounder enjoys great popularity in a wide range of industries thanks to its low-wear and low-maintenance technology. Our model is also equipped with a second foot pedal on the back as well as a table top sensor for automatic triggering of the strapping process. The device from 2009 was already equipped by SMB with the new and easy to understand control panel, which can still be found in the current models. On its four smooth-running heavy-duty rollers and with the 1-phase 230V power connection, this very compact device can easily be put to use at any location in your plant. Fast, thanks to compact design The compact strapping frame covers a wide range of possible applications. Package sizes up to approx. 450mm x 500mm can be strapped with either 5mm or 9mm wide strap. This design makes the device particularly fast, because the strapping band only has to cover a short distance through the strapping frame. Strapping every second is therefore no problem. As good as new due to CUPASO major overhaul With our completely overhauled used machines, you get as-new technology at used machine prices. We make sure that we only refurbish technology that still meets today's requirements. This also applies to the AMPAG Sprint offered here. In terms of handling, availability and efficiency, it does not need to hide behind current models. And with our extensive major overhaul, we have simply turned back the clock for this device by around 14 years and offer you a technically and visually almost new device at less than half the price of a comparable new one. This is what we promise Our guarantee promise of a full 12 months naturally also applies to our SMB AMPAG Sprint. So you are on the safe side. If something should break during this time, we will replace the defective component and install it at our expense (excluding wear and tear and travel). - Frame size: 500 x 400 mm - Year of manufacture: 2009 - Machine number: 111A030921006 - Condition: Overhauled - Equipment: - Foot pedal on both sides - Triggering with table top sensor - Special features: Ncolhen I Up Roccqrsr Extensively overhauled and full warranty for 12 months

Condition: used, color: other, We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Nelhjnh Nyreccqrscr

Condition: refurbished (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 223A011235002, warranty duration: 12 months, year of last overhaul: 2024, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-9 mm Year: 2012 Machine-No.: 223A011235002 Condition: Refurbished Prepared for integration into automated packaging lines Even as a stand-alone machine, this CUBE can be customised to your requirements. The machine detects incoming parcels or product stacks and straps them once or several times according to the previously defined parameters. With the help of the pneumatic package press and the package height-dependent strap tension, packages of different sizes and characteristics can be processed unsorted and individually. By adding a machine of the same design, which is also available from us, it is even possible to realise cross or multiple strapping at high speeds. This is what we promise Our guarantee commitment of a full 12 months of course also applies to our SMB CUBE 600x600c. This means you are on the safe side. If something should break during this period, we will replace the defective component and install it at our expense (excluding wear and tear and travel). Do you have any questions? We look forward to your call or e-mail and will be happy to show you our current projects and new equipment in our showroom. Why don't you come and visit us? Features: • Economical due to maximum availability • Robust and extremely low-maintenance design • Simplest handling • Minimal space requirement • Best cost/benefit ratio • Max. 35 parcels/min; depending on back-tensioning path and frame size, without package pressing • Mobile machine (2 fixed/ 2 steerable rollers with brake) • Table height 770 -1000mm • Driven conveyor belts • Machine colour: Frame RAL 7004 / Frame RAL 7016 Special features: • Signal exchange: 2 x counter plug with tool • Additional light sensor for mounting on leading or following machine • Signal exchange: Do not strap package • External button: Do not strap package • Package height-dependent belt tension (laser sensor) Ncolhccqsubuykeror • Pneumatic package press (600x600) • Double press bar 600 • Draw-in protection on table top, infeed side • Identical machine available for parallel or cross strapping at high speed

Condition: used, color: other, We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Nelhceiiyixscqrjcr