Used Wilo pump for sale (24)

Condition: used, Year of construction: 1983, Additional title: Well pump Flow: 25 l/s Total head: 128 m3/h at 7,5 bar Power: 36,0 kW Current: 75 A Voltage: 380-660 V Bdvymu7x Features: Motor: U851-2/69; Connection: DN150; Check valve: RV DN150 PN16; Cable/length: 115m 3+4x25 round

Condition: as good as new (ex-display), Hello, We offer here a Wilo glanded block pump. The pump comes from a compartment disassembly of a cooling system and was fully functional until disassembly. A total of 2 pieces are available. Wilo glanded block pump BL80/210-30/2, DN100/DN80, 30kW Single-stage dry-running centrifugal pump in close-coupled design for foundation installation. Low-vibration and low-noise close-coupled design with lantern and rigidly connected standard motor. With forced-rotation bellows mechanical seal (from 37 kW/4-pole and 45 kW/2-pole optional with a cartridge mechanical seal in back-pull out system for mechanical seal replacement without dismantling the motor) and cavitation-reducing impeller. Flanges with pressure measuring connections R 1/8. Pump casing and lantern are cataphoresis coated. Standard motors in IE3 technology. Pumps with motors greater than 5.5 kW have PTC thermistors as standard motor protection. Chcpwibtrr Operating data Rated current: 52.2 A Power factor: 0.9 Motor efficiency: 93,1 Motor efficiency: 93.6 Motor efficiency: 93.3 Insulation class: F Protection class: IP55 Materials pump casing: 5.1301, KTL-coated Impeller: EN-GJL-200 Maximum operating pressure: 16 bar Shaft: 1.4122 Shaft seal: AQ1EGG Lantern: EN-GJL-250 Installation dimensions Suction side pipe connection: DN 100 Pressure side pipe connection: DN 80 Ordering information Make: Wilo Product designation: CronoBloc-BL 80/210-30/2 Minimum efficiency index (MEI): 0.4 Net weight approx.: 345 kg Item number: 2121182 Motor data Motor efficiency class: IE3 Mains connection: 3x400 V!, 50 Hz Voltage tolerance: +-10 Motor rated power: 30000 W Rated speed: 2900 rpm

Condition: as good as new (ex-display), Immediately available Water pump Make Wilo type IPL 65/175 -7,5 kw / 2-K3-S1 Art.No. 2092698 14w20 7,5 kw 2900 n1/min. 400/690 volt pn10 DN 65 mm unused from stock Cuhrkoqalr transport dimension : length 410 mm width 800 mm height 570 mm weight ca.80 kg

Condition: used, Circulation pump measuring case C0lleq9 -Transfer in current condition as seen -different flanges and connections -Mess-Wilo circulation pump -Suitcase -Weight: 19 kg

Condition: as good as new (ex-display), For sale is a WILO TOP-STG 50/10. Has lain in stock as a replacement, New original packaging. Wilo glandless standard pump TOP-STG 50/10,DN50,3x400V/230 V,880W Art.no.: 2131680 Applicable for primary circuits in solar and geothermal systems. Maintenance-free glandless circulation pump with screwed or flanged connection, preselectable speed levels for power adjustment. Equipment and function Manual power adjustment with 3 speed levels Pumps with 1~ motor: P2 up to 90W: Internal protection against impermissibly high winding temperatures. P2 = 180W: Full motor protection by winding protection contacts in connection with tripping device Pumps with 3~ motor: P2 up to 90W: Internal protection against impermissibly high winding temperatures. P2 ≥ 180W: Full motor protection with integrated tripping electronics Mains connection 3~230V with optional changeover plug Pump housing KTL coated for optimum corrosion protection Combination flange PN 6/PN 10 (for DN 40 to DN 65) Additional functions through retrofittable Protect Module C Fault signal SSM as floating NC contact Operating signal SBM as potential-free normally open contact Control input "Priority Off" by external potential-free contact (normally closed contact) Blockage detection Full motor protection with integrated trip Fault acknowledgement Dual pump management (two single pumps installed in parallel): Main/standby operation (automatic fault switchover/time-dependent pump replacement). Materials: Pump housing: Cast iron (EN-GJL-250) impeller: plastic (PP - 50% GF) Pump shaft: Stainless steel (X46Cr13) Bearing: Carbon, metal impregnated Permissible pumped media (other media on request) Flow rate max.: 32.0 m3/h Delivery head max.: 10.0 m Pipe connections Nominal width flange: DN 50 Flange: combination flange PN6/10 (flange PN 16 according to EN 1092-2) overall length: 280mm Motor/Electronics Interference emission: EN 61000-6-3 Noise immunity: EN 61000-6-2 Protection class: IP X4D Insulation class: H Mains connection: 3~400/230 V, 50 Hz Mains frequency: 50Hz Motor rated power: 450W speed: 2000 / 2300 / 27001/min Power consumption 3~400V: 500 / 680 / 880 current at 3~400V: 0,89 / 1,20 / 1,73A Motor protection: integrated cable gland: 2x13,5 8skcuvy3sq weight: approx. 17,8kg shipping possible + shipping costs

Condition: new, Wilo Glanded pump IPN50/180-7,5/2 AT, DN50 PN 16, Art. 307833 /2120882 Wilo Glanded pump IPN50/180-7,5/2 AT, DN50 PN 16, 7,5kW max 140 degrees 2900 rpm art. 307833 /2120882 below mentioned data are identical in construction with our predecessor Ordering information Make: Wilo Product designation: CronoLine-IL 50/180-7,5/2 net weight approx. m: 106 kg Order number: 2120882 Operating data: Pumped liquid: Water Medium temperature T: -20 °C Ambient temperature T: -15 °C Maximum operating pressure PN: 16 bar Design pressure: 16 bar up to 120°C, 13 bar up to 140°C Minimum efficiency index (MEI): 0.4 Hydraulic data: Minimum efficiency index (MEI): 0.4 Max. Working pressure p: 16 bar Max. operating pressure PN: 16 bar Min. media temperature Tmin: -20 °C Max. media temperature Media temperature Tmax: 140 °C Max. Ambient temperature Tmax: 40 °C Design information: 16 bar up to 120°C, 13 bar up to 140°C Motor data: Mains connection : 3~400 V, 50 Hz Voltage tolerance : ±10 Motor efficiency class : IE3 Motor rated power P2: 7,50 kW Rated current IN: 13,30 A Rated speed n: 2900 1/min Power factor cos φ: 0.90 Motor efficiency ηM 50%: 88.9 percentage Motor efficiency ηM 75%: 90.3 percentage Motor efficiency ηM 100%: 90.1 percentage Motor winding up to 3 kW: - Motor winding from 4 kW: - Insulation class: F Motor protection class: IP55 motor protection: no Materials: Ch2opws9r2 Pump housing: 5.1301/EN-GJL-250 KTL-coated Impeller: EN-GJL-200 (GG-20) cast iron Shaft: stainless steel Mechanical seal: AQ1EGG Lantern: 5.1301/EN-GJL-250 KTL-coated Condition: "New". Pumps from stock. Partly without original carton. May have dirt or storage marks/cl. dents. Unused they look at the holes. There are no fastening traces See pictures Shipping with special/package/shipping P4 More items - new and used - you will find in our store! International shipping costs on request!

Condition: used, Year of construction: 1995, machine/vehicle number: 14165 / 14166 / 14167, Capacity: 6 m³/h Pressure: 16 bar Pressure head: 34 m Speed: 2.750 rpm Connection: 1.530 W max. temperature: 25° C Description: Pump system consisting of three identical pumps; Pressure tank for nitrogen 8 litres, 16 bar, up to 70° C Qauyo2jf condition: very good weight: Dimensions: 800 x 400 x 600 mm

Condition: excellent (used), Year of construction: 2010, Hello, The pump comes from a compartment disassembly of a cooling system and was fully functional until disassembly. In total there are 2 pieces available. Hydraulic data Minimum efficiency index (MEI) 0.4 Min. media temperature Tmin -20 °C Max. media temperature Media temperature Tmax 140 °C Max. Ambient temperature Tmax 40 °C Max. operating pressure PN 16 bar Design note 16 bar up to 120 °C, 13 bar up to 140 °C Motor data Mains connection 3~400 V, 50 Hz Voltage tolerance ±10 Motor efficiency class IE3 Motor rated power P2 15 kW Chcpy73gf0 Rated current IN 26.8 A Rated speed n 2900 1/min Power factor cos φ 0.88 Motor efficiency ηM 50% 90.4 % Motor efficiency ηM 75% 92.1 % Motor efficiency ηM 100% 91,6 % Motor winding up to 3 kW - Motor winding from 4 kW - Insulation class F Protection class motor IP55 Motor protection KLF integrated Materials Pump housing 5.1301/EN-GJL-250 KTL-coated Impeller cast iron EN-GJL-200 Shaft stainless steel Mechanical seal AQ1EGG Lantern 5.1301/EN-GJL-250 KTL-coated Installation dimensions Suction side pipe connection DNs DN 100 Pressure side pipe connection DNd DN 100 Overall length l0 500 mm

Condition: good (used), Year of construction: 2021, water pump Wilo Crono Twin DL40/170 5,5/2 85 m³/h 42 m 5,5 KW Cke3aw2tjs price: 4.250 Euro contact: Mr. Rainer Eckerle

Condition: used, Centrifugal pump, water pump, multistage vertical centrifugal pump -Max. Delivery rate: 5.0 m³/h -Pressure: max. 25 bar -Motor power: 3 kW -Speed: 2840 rpm -Housing and impeller made of: stainless steel -Weight: 45 kg C2p0vzuq

Condition: ready for operation (used), There are three identical pumps available, min. medium temperature: -20°C, min. ambient temperature: -15°C, max. operational pressure: 16bar, nominal rotational speed: 2900/min, nominal motor power: 11,000W, weight: 158kg. Ehhky0n

Condition: new, Wilo IP-E50/115-0,75/2-E1-S1 Art. No. 2115924/1102, 400V, 2910min, 110 C, 1,1kW Wilo glanded pump, Wilo IP-E50/115-0,75/2-E1-S1 part no. 2115924 400V, 2910 rpm Ddyzz7o Condition: "Pump was installed in test rig. Little to no running time". Pumps from stock. Partly without original box. May have dirt or storage marks/cl. dents. Unused they look at the holes. There are no fixing traces See pictures Shipping with special/package/shipping P7 Item number 23196 Please specify with inquiries

Condition: excellent (used), Year of construction: 2008, many pumps available, from 5m³/h to 500m³/h Bekghauvzv

Condition: excellent (used), Year of construction: 2010, Hello, The pump comes from a compartment disassembly of a cooling system and was in use until disassembly. Cgopmf03 Design Single-stage low-pressure centrifugal pump with axial suction, according to EN 733, mounted on base plate. Application Pumping of heating water (according to VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. ƒ Applications in irrigation, building services, general industry, power plants, etc Type code Chdgtmodon Example NL50/250-18,5-2 NL Standard pump with axial suction 50 DN for discharge flange 250 Nominal impeller diameter [mm] 18.5 Nominal motor power P2 [kW] 2 Number of poles

Condition: excellent (used), Wilo IPN100/224-4/4 DN100 PN16 Cooling water pump Mcouxj8x Art. no. 120912894 4 kW 120/140 degrees 16/13 bar Glanded pump Condition: used Pumps from stock. Partly without original box. May have dirt or storage marks/ dents. Unused they look at the bores. There are no fixing traces. See pictures Shipping with special/parcel/shipping P11 More items - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2010, Hello, Chdgwciwcw The pump comes from a compartment disassembly of a cooling system and was in use until the disassembly. Design Single-stage low-pressure centrifugal pump with axial suction, according to EN 733, mounted on base plate. Application Pumping of heating water (according to VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. ƒ Applications in irrigation, building services, general industry, power plants, etc Type code Example NL 80/250-30-2 NL Standard pump with axial suction 80 DN for discharge flange 250 Nominal impeller diameter [mm] 30 Nominal motor power P2 [kW] 2 Number of poles

Condition: excellent (used), Wilo IL80/130-5, 5/2-G1 Art. Nee: oud 2045853 nieuw 2120912 5,5kW 2900 rpm Verwarmingspomp/circulatiepomp Wilo droogloper-standaard ééntrapspomp IL 80/130-5, 5/2, DN80, 3x400V, 5,5kW Eéntraps droogloper-centrifugaalpomp in inline-bouwtype voor installatie in buizen of funderingen. Trillings- en geluidsarme kortgekoppelde constructie met lantaarn en stijf verbonden standaard flensmotor (standaard motor). Met geforceerde, van de draairichting onafhankelijke, mechanische balgafdichting en cavitatieverminderende waaier. Flenzen met drukmeetaansluitingen R 1/8. Pomphuis en lantaarn zijn kataforese gecoat. Bedrijfsgegevens Nominale stroom: 9,9 A Vermogensfactor: 0,9 Motorrendement: 86,7 Motorrendement: 88,9 Motorrendement: 89,2 Isolatieklasse: F Beschermingsklasse: IP55 Materialen Pomphuis: 5.1301, KTL-coating Waaier: EN-GJL-200 Maximale bedrijfsdruk: 16 bar Schacht: 1.4122 Asafdichting: AQ1EGG Lantaarn: 5.1301, KTL-coated Inbouwmaten Aansluiting zuigleiding: DN 80 Aansluiting drukleiding: DN 80 Lengte: 400 mm Bestelinformatie Merk: Wilo Productbenaming: CronoLine-IL Minimale efficiëntie-index (MEI): 0,4 80/130-5,5/2 Nettogewicht ca.: 95 kg Artikelnummer: 2120912 Motorgegevens Efficiëntieklasse motor: IE3 Netaansluiting: 3x400 V!, 50 Hz Spanningstolerantie: +-10 Nominaal motorvermogen: 5500 W Nominale snelheid: 2900 rpm Staat: Nieuw Pompen uit voorraad. Gedeeltelijk zonder originele doos. Kan vuil of opslagsporen / deuken hebben. Ongebruikt kijken ze naar de gaten. Er zijn geen bevestigingssporen Zie foto's Verzending met speciale/verpakking/verzending P9 Gxmbxg Meer artikelen - nieuw en gebruikt - vindt u in onze shop! Internationale verzendkosten op aanvraag!

Condition: excellent (used), Year of construction: 2009, Hello, We offer here a Wilo glanded pump. The pump comes from a compartment disassembly of a cooling system and was fully functional until last. Single-stage dry-running centrifugal pump in block design for foundation installation. Low-vibration and low-noise block design with lantern and rigidly connected standard motor. With forced-rotation bellows mechanical seal (from 37 kW/4-pole and 45 kW/2-pole optional with a cartridge mechanical seal in back-pull out system for mechanical seal replacement without dismantling the motor) and cavitation-reducing impeller. Flanges with pressure measuring connections R 1/8. Pump casing and lantern are cataphoresis coated. Standard motors in IE3 technology. Pumps with motors greater than 5.5 kW have PTC thermistors as standard motor protection. Operating data Rated current: 20.5 A Power factor: 0,85 Motor efficiency: 89,4 Motor efficiency: 91 Hn7obpjao Motor efficiency: 91.2 Insulation class: F Protection class: IP55 Materials pump casing: 5.1301, KTL-coated Impeller: EN-GJL-200 Maximum operating pressure: 16 bar Shaft: 1.4122 Shaft seal: AQ1EGG Lantern: EN-GJL-250 Installation dimensions Suction side pipe connection: DN 100 Pressure side pipe connection: DN 80 Ordering information Make: Wilo Product designation: CronoBloc-BL 80/150-15/2 Minimum efficiency index (MEI): 0.4 Net weight approx.: 177 kg Item number: 2121176 Motor data Motor efficiency class: IE3 Mains connection: 3x400 V!, 50 Hz Voltage tolerance: +-10 Motor rated power: 15000 W Rated speed: 2900 rpm

Condition: excellent (used), Year of construction: 2010, Hello, The pump comes from a compartment disassembly of a cooling system and was in use until the disassembly. Design Chdgtmodon Single-stage low-pressure centrifugal pump with axial suction, according to EN 733, mounted on base plate. Application Pumping of heating water (according to VDI 2035), cold water and water-glycol mixtures without abrasive substances in heating, cold water and cooling systems. ƒ Applications in irrigation, building services, general industry, power plants, etc Type code Example NL 65/125-7.5-2 NL Standard pump with axial suction 65 DN for discharge flange 125 Nominal impeller diameter [mm] 7.5 Nominal motor power P2 [kW] 2 Number of poles

Condition: excellent (used), Lot of electric well pumps manufactured by Lowara and Wild, with control units, residual current circuit breakers, various models, partly unused, (10 pieces). versions, partly unused, (10 pieces) Ccnkqufz

Condition: used, machine/vehicle number: 2090447/08w46, Connection: DN 40 Guarantee in months: 12 Length: 180 mm Traces of use: Slight Power: 9 - 85 W Case: Small storage marks Manufacturer: Wilo Voltage: 230 V AC Frequency: 50 / 60 Hz Temperature: max. 110 °C Product condition: Used from old Stock Dzbfa3 Protection Class (IP): 44 Current: 0,13 - 0,78 A Item No.: 2090447/08w46

Condition: excellent (used), Active cooling system Here we offer you an active cooling system. Active cooling system Gw8e8la Type: EOL EMP 242 Condition: used / used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, Wilo IL50/270-4/4-S1 glanded single pump 4000W pump 2060085/0810, 4kW, IL50 270-4/4-S1, centrifugal pump, 3~400/690 V, 50 Hz, DN50 PN16 Condition: unused item, but shows slight signs of storage (see pictures) EAN: 4016322797777 Manufacturer's technical data:Hydraulic dataMinimum efficiency index (MEI)0,4Minimum. Fluid temperature T min-20 °CMax. Fluid temperature T max140 °CMax. Ambient temperature T max40 °CMax. operating pressure PN16 barNote on dimensioning16 bar to 120 °C, 13 bar to 140 °C Motor dataMains connection3~400 V, 50 HzVoltage tolerance±10 %Motor efficiency classIE3Nominal power P 24 kWRating current I N8.2 ANominal speed n1450 1/minPower factor cos φ0.79Motor efficiency η M 50 %85.8 %Motor efficiency η M 75 %87, 6 %Motor efficiency η M 100 %88 %Motor winding up to 3 kW-Motor winding from 4 kW-Isolation classFShield type motorIP55Motor protectionNEINYou can find more pumps (Wilo and other manufacturers) and other products for industrial needs in our stores. PSH3R6Cright approx. 100 kg Beis02yzhxi

Condition: used, Motor protection relay, relay, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor -3: 400VAC 10A max. 3 kW -1: 230VAC 10A max. 1 kW 3aoi7uq9 -3: 230VAC 10A max. 1.5 kW -Price: per piece -Number: 1x available -Weight: 0.5 kg