GOM ATOS 3D scanner measuring system

GOM ATOS IIe Triple Scan 3D Triple Scanner

Condition: new, functionality: fully functional, Comparable to Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 220 t Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Stroke 350 mm Installation height 600 mm Throat depth 450 mm X-axis travel 750 mm X-axis speed 300 mm/s R-axis travel 250 mm R-axis speed 100 mm/s Clear gap between frames 2555 mm Machine length 3730 mm Machine width 2290 mm Overall height 3055 mm Table height 820 mm Motor power 22 kW Oil tank 300 l Machine weight 11,500 kg (technical data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Press beam double-guided, stable and precise - Robust backgauge, double-guided - Manual backgauge fingers, double-guided on linear rails - Movable front arms with height adjustment - Side and rear safety guards - Lower die adapter rail 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3 phase - LED lighting Including the following options: - Delem DA 66T CNC controller - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X-R axis with servo motors - CNC crowning for high bending accuracy - 2 additional backgauge fingers - Further bending lengths and capacities available with appropriate accessories! - Bsdjq D Dzlepfx Ah Isld

Condition: used, GOM - ATOS III Rev.02.1 - 3D Measuring Device Condition: Used, very good. Bsdpfx Ahsxr Umgs Ijld Technical specifications: Camera system: 2 x 8,000,000 Camera pixels: 2048 x 2048 pixels (approx. 4 megapixels) Measuring field sizes XYZ: 150 x 150 x 100 mm up to 2000 x 2000 x 2000 mm Measuring point distance: 0.075 mm to 1.0 mm Scan time: approx. 2 seconds Measuring volume: 700 series (incl. calibration plate) Blue light technology: Precise measurements independent of ambient lighting. Includes computer equipment and USB dongle Software version: 2023 Includes Tritop System (camera, 2x 1m reference scales, license) All in original cases With tripod, PC, rack, monitor, small tools, reference points, 1x probe Plug in and start working immediately…

Condition: used, Year of construction: 2013, functionality: fully functional, cooling capacity: 113 kW (153.64 HP), type of cooling: water, overall weight: 943 kg, total width: 2,100 mm, total length: 2,270 mm, total height: 1,330 mm, heating capacity: 117 kW (159.08 HP), Equipment: compressor, Used Carrier 30 RQS 120 air cooled chiller / heat pump on R410A. Complete with 3 Copeland ZP182KQE-TFD-604 scroll compressors, braced heat exchanger, Carrier PM 100-110mm fan - 50 Hz - 0,53/0,18 kW - 720/500 RPM, Mecasem OOPSG001171100C receiver with a volume of 23,5 liter and a control cabinet with a Carrier Pro-Dialog+ display. Specifications Brand: Carrier Type: 30 RQS 120 Product type: Water chiller / Heat pump Refrigerant: R410A Weight: 943 kg Dimensions: 2270x2100x1330 mm (LxWxH) Compressors: 3 Copeland ZP182KQE-TFD-604 Bodpfjrlk E Njx Ah Iold Display: Carrier Pro-Dialog+ Number of fans: 2 Fan specifications: 50 Hz - 0.53/0.18 kW - 720/500 RPM Year of manufacture: 2013 Quantity in stock: 1

Condition: used, Year of construction: 2015, Brand: Rhoss Model: TCAV Z810 Cooling Capacity kW/h: 800 kW/h Cooling Capacity Kcal/h: 688,000 Kcal/h Evaporator: Shell & Tube Condenser: Al Finned Copper Tube Compressor: Refcomp Compressor Model: 134-S-160-L4 Controller: Carel Bodpfx Asin N Amjh Isld Dimensions (mm): 2260 x 7680 x 2430 Weight (kg): 6490 kg

Condition: new, Year of construction: 2023, Air-cooled chiller ENR160 130KW at 7/12°C, internal P3 pump, internal 390l buffer tank. The unit is perfectly suited for process applications as it is equipped with a shell-and-tube evaporator, a buffer tank, and an internal P3 pump. Low GWP refrigerant R454B, winter package, RS485. Bledpfx Ahjgfvlzj Isd

Condition: used, functionality: fully functional, cooling capacity: 73.6 kW (100.07 HP), type of cooling: water, total width: 2,000 mm, total length: 6,050 mm, total height: 2,200 mm, Equipment: compressor, Used Copeland ZR19M3E-TWD-570 air cooled chiller on Freon. Complete with 2 Copeland ZR19M3E-TWD-570 scroll compressors, condenser with 2 Ziehl-Abegg FN100-MDS.7M.V5P1 fans - 50 Hz - 0,57/0,34 kW - 550/460 RPM - diameter 1000 mm and 2 Ziehl-Abegg FE100-NDS.6N.6 fans - 50 Hz - 0,86/0,50 kW - 420/310 RPM - diameter 1000 mm, braced heat exchanger as evaporator, water pump, expansion vessel and a control cabinet with a Carel PCO5+ electronic controller. The chiller has a capacity of 76,6 kW at the following temperatures: +0°C/+40°C. Blodpfjrlk Hfex Ah Ied

Condition: like new (used), functionality: fully functional, The Inotec IGS2 is a specialized, high-performance automatic machine designed for portioning and tying sausage-shaped products with string. It is the ideal solution for processors of specialty sausages, molded meats, or products where string closure and tying are preferred over clipping. Performance & Tying Speed High Output: Achieves a Max. output of Up to 280 portions/tyings per minute, significantly increasing throughput for tied products. Automatic Function: Automatically handles the portioning and tying process, eliminating labor-intensive manual tying and ensuring consistency. Precision Control: Equipped with the Inotec Touch iT control, 10.4" touchscreen panel for intuitive operation, precise parameter setting, and fast recipe management. Robust Power: Runs on a reliable 3/PE/400 V/50 Hz Power Supply, ensuring stable performance during continuous operation. Versatility & Reliability Ideal Caliber Range: Optimized for a specific range of products with a Caliber Range of 28 mm to 45 mm (IGS2-IT), ensuring perfect tension and tying for mid-size sausages. Seamless Integration: Designed to integrate efficiently with upstream vacuum fillers (like the Handtmann VF series), providing a continuous flow from filling to packaging preparation. Hygienic Construction: Robust stainless steel construction makes the machine durable and easy to clean, meeting high food safety standards. Bedsxv Si Hspfx Ah Ijld Excellent Condition: This machine is ready for production, offering reliable, high-speed tying performance.

Condition: excellent (used), functionality: fully functional, The Inotec IGS2 is a specialized, high-performance automatic machine designed for portioning and tying sausage-shaped products with string. It is the ideal solution for processors of specialty sausages or products where a string closure is preferred over clipping. Blodsxxkx Sopfx Ah Iod Performance & Tying Speed High Output: Achieves a Max. output of Up to 280 portions/tyings per minute, significantly increasing throughput for tied products. Automatic Function: Its function is the Automatic portioning and tying of sausage-shaped products with string, eliminating labor-intensive manual tying. Precision Control: Equipped with the Inotec Touch iT control, 10.4" touchscreen panel for intuitive operation and precise parameter setting. Caliber Versatility: Optimized for a specific range of products with a Caliber Range of 28 mm to 45 mm (IGS2-IT), ensuring optimal tying for mid-size sausages. Power and Air: Runs on a stable 3/PE/400 V/50 Hz Power Supply and requires compressed air at 6 bar with a consumption of 300 liters/min. Weight 230 kg. Seamless Integration: Designed to integrate efficiently with upstream vacuum fillers, providing a continuous flow from filling to packaging preparation. Hygienic Construction: Robust stainless steel construction makes the machine durable and easy to clean, meeting high food safety standards.