Induction hardening machine

Grimm

The system is designed for the automatic induction hardening of screws and bolts in sizes M8 and M10.

Manufactured by Grimm Zuführtechnik, the system is capable of processing approximately 70-80 parts per minute (depending on the component) and offers various monitoring features (temperatures, component heights, component types, rotation monitoring, etc.).

Parts are conveyed from a bunker belt via a steep conveyor to a linear sorter, from where they are precisely positioned and transferred into an 8-position indexing table, with two nests per station.

A 50kW high-frequency generator from IDEA is connected, featuring additional monitoring functions (energy output, earth fault detection, inductor water flow and temperature monitoring, etc.).

The system includes its own quench water tank, from which the parts are discharged using a magnetic conveyor belt. The parts are then demagnetized.

Quench medium filtration is handled via a cartridge filter.

Both the system and the generator are prepared for connection to a central cooling system.
Csdpfsxlii Asx Abwsrh

Due to the currently unconnected cooling, the system is only partially operational; however, it can be inspected by interested buyers.

The system was built in 2019 and, unfortunately, has never been run continuously due to the impact of the Covid-19 pandemic and associated order cancellations. As a result, it is in like-new condition.

Should you require additional photos, we also welcome you to visit and inspect the system on site.

The listing was translated automatically. Translation errors are possible.