HAAS VF-4

HAAS VF-4

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 3,000 mm, total width: 2,300 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, product length (max.): 3,200 mm, number of axes: 3, This 3-axis HAAS VP 4SS was manufactured in 2014. It features an impressive X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool change count of 67,000. If you are looking to get high-quality machining capabilities, consider the HAAS VP 4SS vertical machining centre we have for sale. Contact us for further details. • Operating hours: 14,700 h • Tool changes count: 67,000 • Voltage: 354–488 V • Phase: 3 • Frequency: 50/60 Hz • Full load current: 40 A Ksdpfx Agsz Dauwj Aedu

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 29384, travel distance X-axis: 1,250 mm, travel distance Y-axis: 600 mm, spindle speed (min.): 7,500 rpm, Equipment: chip conveyor, documentation/manual,

Condition: used, Year of construction: 2016, operating hours: 48,000 h, functionality: fully functional, spindle motor power: 22,400 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, We are offering this used Haas VF-4SS vertical machining center, manufactured in 2016. It operated for 10 years in a two-shift system (approximately 48,000 hours) and was exclusively used for dry machining of castings. The machine is powered and ready for inspection. Kdjdpfx Aoz R Rf Asg Aeu Inspection is possible in 08543 Pöhl / Helmsgrün. Up to 8 identical VF4SS machines are available for sale, and matching dust extraction systems are also available. Model: VF-4SS Serial number: 1123904 Software version: M18.24B Link date: 14.04.2015 12:47:41 Rotary firmware version: 19 Floppy version: FV 6 14.011 Video version: VV 41 Mocon #1 version: 17.28 Monitor version: 2.02 FPGA version: 1.15B Mocon #2 version: SKBIF version: 49 (SKBIF-2 MODE) RJH type: C Operating time: 4829:52:51 h:mm:ss Number of tool changes: 648213 Power-on cycles: 729 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2019, operating hours: 2,557 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HAAS, controller model: CNC Control, total height: 3,096 mm, total length: 3,832 mm, total width: 3,402 mm, table width: 473 mm, table length: 1,321 mm, table load: 1,500 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,557 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine is in excellent condition and has only 2557 spindle hours, and it is very well-equipped! This HAAS VF-4 is equipped with: - Chip conveyor - Renishaw OTS tool probe - Renishaw (HAAS 40-2) 3D probe - Programmable coolant nozzle - Mechanical preparation for a 4th axis - Approx. 25 tool holders incl. tools Kdjdpfxsz Nfirs Ag Asu - Machine vise - Coolant gun - 3 Renishaw probe styli - Coolant tank - Original documentation.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 3,000 mm, total width: 2,300 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, product length (max.): 3,200 mm, number of axes: 3, This 3-axis HAAS VF 4SS was manufactured in 2018. It features an X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool changes count of 69,000. If you are looking to get high-quality machining capabilities, consider the HAAS VF 4SS vertical machining centre we have for sale. Contact us for further details. Kedez Dar Nepfx Ag Aodu • Operating hours: 31,300 h • Tool changes count: 69,000 • Voltage: 440 V • Phase: 3 • Frequency: 50/60 Hz • Full-load current: 35 A

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2019. It features impressive X/Y/Z axis travels of 1,270 x 508 x 635 mm and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer capacity of 30+1 tools and offers high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details. • Tool taper: BT-40 • Rapid Traverse: 35.6 m/min • Cooling pressure: 21 bar • Chip conveyor: Screw-Type Chip Conveyor • Machine Type: Vertical Machining Center • Spindle Nose to Table: 102 mm • Max. Cutting Feed Rate: 20.5 m/min • Tool Changer: Random Kdedpfxoz Ah S Do Ag Aou • Tool Changer Capacity: 30+1 tools, vertical • Power Failure Detection Module: Yes • Interface: USB / LAN • Rigid Tapping: Yes • Coordinate Rotation System: Yes • Programmable Coolant Nozzle: Yes • Automatic Air Blast: Yes • Renishaw Wireless Intuitive Probing System: Yes • Macro Variables and Scaling Factors: Yes • High-Speed Machining: Yes • Auxiliary High-Pressure Filter: Yes

Condition: ready for operation (used), Year of construction: 2011, controller manufacturer: HAAS, This 3-axis HAAS VF-4 was manufactured in 2011. It features a generous X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a 40-tool automatic tool changer and includes a probe and toolsetter for enhanced precision. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4 vertical machining centre we have for sale. Contact us for further details. Kjdjzxp D Hjpfx Ag Asdu

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 794 kg, overall weight: 6,260 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2023. It features an impressive X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1,321 x 495 mm and a maximum table load of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining centre we have for sale. Contact us for further details. • Condition: Like new, used • Functionality: Fully operational • Operating hours: 3,363 h • Spindle/machining hours: 2,402 hTravels • Spindle nose to table: 107–742 mmSpindle • Maximum spindle torque: 122 Nm at 2,000 rpm • Spindle drive: Inline direct drive • Spindle taper: CAT40 • Number of spindles: 1Table • Table dimensions: 1,321 × 495 mm • Number of T-slots: 5 • T-slot width: 15.9–16 mmTool changer • Tool capacity: 30+1 positions • Tool-to-tool time: approx. 1.8 s Kdodjzwffkspfx Ag Aeu • Chip-to-chip time: approx. 2.4 sMachine dimensions and weight • Note: Dimensions in the original ad were incorrectly stated in millimetres instead of centimetres. • Export shipping dimensions without conveyor: 3,330 × 2,330 × 2,570 mm • Export shipping dimensions with chip conveyor: approx. 4,140 × 2,330 × 2,570 mm • Advertised machine weight: approx. 6,200 kg • Official weight with conveyor: approx. 6,260 kgInstalled options • Through-Spindle Coolant (TSC), 300 psi / 21 bar • Renishaw Wireless Intuitive Probing System (WIPS) • High-Speed Machining (HSM) • Programmable coolant nozzleElectrical • 400 V, three-phase power supply Additional equipment • Chip auger • Haas Chip Lift (chip conveyor) • Coolant mist condenser • Probe riser block • Approximately 15 tool holders • Documentation and manuals

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1183016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece length (max.): 1,270 mm, workpiece width (max.): 635 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 794 kg, table width: 475 mm, table length: 1,321 mm, overall weight: 6,033 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,240 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, MACHINE Vertical machining center, HAAS, VF-4SS STANDARD EQUIPMENT: CNC control, 4 axes, HAAS type (NGC version), compatible with Fanuc, ISO programming, G-codes ISO40 spindle taper, CT type 1 GB memory capacity 15" LCD monitor, touchscreen and USB port Kodpfx Agezt Nlmo Aedu Ethernet + WiFi network card Early voltage drop detection module (prevents the effects of voltage drops) HaasConnect – remote monitoring of machine operating status via the Internet, VNC and DPRNT protocol Program restart – ability to start the program from any block RunStopJogContinue – ability to move the tool without interrupting the program SafeRun – active anti-collision system (minimizing the effects of collisions) Electronic handwheel Spindle cooling system Temperature compensation for ball screws Protective cabin with sliding front doors and side windows Side magazine with 30 positions Memory lock Spindle taper air blow system Thread cutting without a compensating chuck (rigid) Installation for connecting compressed air Cooling system with a pull-out coolant tank, filled with coolant Automatic central lubrication system Machine tool lighting "Guns" for air and coolant (mounted on the front of the machine) 4AXD – Machine preparation / connections, wiring / For connecting the table, without a table AUGER – Screw chip conveyor HSM – Faster processor with look-ahead function, accelerating the machining of shapes with 3-axis interpolation ACF – Additional 25 μm filtration system, essential for machining cast iron, aluminum, wood, and phenol-based and other dusty materials TSC* – Through-spindle cooling, pump with increased power /21 bar, 22 l/min/ (ACF option required) WIPS-R – Renishaw probe set, wireless, for measuring tool radius and length, for measuring and setting using (graphic) measuring cycles. SO – Spindle orientation MACRO – Parametric programming COORD – Scaling and rotation of the coordinate system VPS (Visual Programming System) – graphic machining cycles, expansion and creation of custom cycles

Condition: used, Year of construction: 2023, operating hours: 259 h, functionality: fully functional, machine/vehicle number: 1200002, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours. The machine is in excellent optical and technical condition. The VF-4 is already fully prepared for 4-/5-axis operation from the factory – the extensive 5th-AXIS package is installed: - Axis cards for the 4th and 5th axes - Dynamic workpiece offset - Tool center point control - High-speed machining - Programmable coolant nozzle - Wireless Renishaw measuring probe and tool probe In addition, the machine is unusually well-equipped: - TSC – internal coolant supply with 21 bar - Spiral chip conveyor - Complete coolant maintenance package (automatic replenishment, oil separator, mist collector) - Fast 30+1 tool changer - Spindle with 10,000 rpm The control system is the current Haas Next Generation Control with touchscreen, WLAN, Ethernet, and HaasConnect remote monitoring. This makes the machine immediately ready for demanding machining tasks. The original transport securing devices are available. An original Haas tool cart for SK40 is also included. Kdjdpfey Tp E Ajx Ag Aju Inspection and demonstration under power are possible at any time by appointment. Loading and transport can be arranged. A suitable TRT-210 CNC rotary table is offered in a separate listing and can be included in the package if desired. The LANG base plates are not included in the scope of supply. Technical data: - Travel ranges X / Y / Z: 1,270 × 508 × 635 mm - Spindle nose to table: 107 – 742 mm - Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg - Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid-cooled - Drive power: 22.4 kW - Max. torque: 122 Nm at 2,000 min⁻¹ - Rapid traverse X / Y / Z: 25.4 m/min - Feed rate max.: 16.5 m/min - Tool changer: Side SMTC, 30+1 positions - Tool max. diameter / length / weight: 64 mm / 330 mm / 5.4 kg - Tool change time (chip-to-chip): approx. 3.6 s - Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed) - Compressed air: approx. 113 l/min at 6.9 bar - Coolant tank: 208 l - Weight: approx. 6,260 kg (with conveyor) Control: - Haas Next Generation Control with touchscreen - 1 GB program memory, Ethernet + WLAN - HaasConnect (remote monitoring), HaasDrop (wireless file transfer) - M130 media display, safe run, synchronized thread drilling - Early detection module for power failure, overvoltage protection - Equipment / options (all installed from the factory) - 5-axis package VF-YT (4th + 5th axis drive-side prepared, DWO/TCPC, high-speed machining, programmable coolant nozzle) - Wireless Renishaw measuring probe system (intuitive) - TSC – internal coolant supply through the spindle, 21 bar - Spiral chip conveyor - Coolant maintenance package (automatic replenishment, oil separator, mist collector) - Additional coolant filter (bag filter 25 µm) - Filter set for chip sump (200 µ) - Variable coolant flow (M-code controlled) - Blowing of the inside of the machine door - Lifting eyes, touchscreen, door lock